Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “Sr”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 289 records · Page 16
All sourcesNASA NTRSDOE OSTI
DOE OSTI2020

Materials Data on Sr(MgBi)2 by Materials Project

Bi2Mg2Sr crystallizes in the trigonal P-3m1 space group. The structure is three-dimensional. Sr is bonded to six equivalent Bi atoms to form SrBi6 octahedra that share corners with twelve equivalent MgBi4 tetrahedra, edges with six equivalent SrBi6 octahedra, and edges with six equivalent MgBi4 tetrahedra. All Sr–Bi bond lengths are 3.47 Å. Mg is bonded to four equivalent Bi atoms to form MgBi4 tetrahedra that share corners with six equivalent SrBi6 octahedra, corners with six equivalent MgBi4 tetrahedra, edges with three equivalent SrBi6 octahedra, and edges with three equivalent MgBi4 tetrahedra. The corner-sharing octahedra tilt angles range from 17–54°. There are three shorter (2.98 Å) and one longer (2.99 Å) Mg–Bi bond lengths. Bi is bonded to three equivalent Sr and four equivalent Mg atoms to form a mixture of distorted edge and corner-sharing BiSr3Mg4 pentagonal bipyramids.

36 MATERIALS SCIENCE↗
DOE OSTI2020

Materials Data on Sr(BiS2)2 by Materials Project

Sr(BiS2)2 crystallizes in the hexagonal P6_3/m space group. The structure is three-dimensional. there are two inequivalent Sr2+ sites. In the first Sr2+ site, Sr2+ is bonded in a 8-coordinate geometry to eight S2- atoms. There are a spread of Sr–S bond distances ranging from 3.12–3.46 Å. In the second Sr2+ site, Sr2+ is bonded in a 8-coordinate geometry to eight S2- atoms. There are a spread of Sr–S bond distances ranging from 3.07–3.31 Å. There are four inequivalent Bi3+ sites. In the first Bi3+ site, Bi3+ is bonded to six S2- atoms to form BiS6 octahedra that share corners with two equivalent BiS5 square pyramids, edges with six BiS6 octahedra, and an edgeedge with one BiS5 square pyramid. There are a spread of Bi–S bond distances ranging from 2.63–3.04 Å. In the second Bi3+ site, Bi3+ is bonded to six S2- atoms to form distorted BiS6 octahedra that share corners with four equivalent BiS5 square pyramids, edges with four BiS6 octahedra, and an edgeedge with one BiS5 square pyramid. There are a spread of Bi–S bond distances ranging from 2.56–3.52 Å. In the third Bi3+ site, Bi3+ is bonded to five S2- atoms to form distorted BiS5 square pyramids that share corners with six BiS6 octahedra, edges with two BiS6 octahedra, and edges with two equivalent BiS5 square pyramids. The corner-sharing octahedra tilt angles range from 3–83°. There are a spread of Bi–S bond distances ranging from 2.59–2.89 Å. In the fourth Bi3+ site, Bi3+ is bonded to six S2- atoms to form a mixture of edge and corner-sharing BiS6 octahedra. The corner-sharing octahedral tilt angles are 60°. There are a spread of Bi–S bond distances ranging from 2.69–3.04 Å. There are eight inequivalent S2- sites. In the first S2- site, S2- is bonded to four equivalent Sr2+ and one Bi3+ atom to form distorted SSr4Bi square pyramids that share a cornercorner with one SSrBi5 octahedra, corners with ten SSr4Bi square pyramids, corners with two equivalent SSr2Bi3 trigonal bipyramids, edges with eight SSrBi4 square pyramids, and edges with two equivalent SSr2Bi3 trigonal bipyramids. The corner-sharing octahedral tilt angles are 3°. In the second S2- site, S2- is bonded to two Sr2+ and three Bi3+ atoms to form distorted SSr2Bi3 trigonal bipyramids that share a cornercorner with one SSrBi5 octahedra, corners with eight SSr4Bi square pyramids, corners with two equivalent SSr2Bi3 trigonal bipyramids, edges with two equivalent SSrBi5 octahedra, edges with five SSr4Bi square pyramids, and edges with two equivalent SSr2Bi3 trigonal bipyramids. The corner-sharing octahedral tilt angles are 46°. In the third S2- site, S2- is bonded to two equivalent Sr2+ and three Bi3+ atoms to form distorted SSr2Bi3 trigonal bipyramids that share corners with four equivalent SSrBi5 octahedra, corners with four SSr2Bi3 square pyramids, an edgeedge with one SSrBi5 octahedra, edges with four SSr4Bi square pyramids, and edges with four SSr2Bi3 trigonal bipyramids. The corner-sharing octahedra tilt angles range from 5–43°. In the fourth S2- site, S2- is bonded to four Sr2+ and one Bi3+ atom to form distorted SSr4Bi square pyramids that share corners with six SSr4Bi square pyramids, corners with two equivalent SSr2Bi3 trigonal bipyramids, edges with two equivalent SSrBi5 octahedra, edges with seven SSr4Bi square pyramids, and edges with three SSr2Bi3 trigonal bipyramids. In the fifth S2- site, S2- is bonded in a distorted trigonal planar geometry to three equivalent Bi3+ atoms. In the sixth S2- site, S2- is bonded to one Sr2+ and four Bi3+ atoms to form distorted SSrBi4 square pyramids that share corners with four equivalent SSrBi5 octahedra, corners with two equivalent SSr4Bi square pyramids, corners with three equivalent SSr2Bi3 trigonal bipyramids, an edgeedge with one SSrBi5 octahedra, edges with six SSr4Bi square pyramids, and an edgeedge with one SSr2Bi3 trigonal bipyramid. The corner-sharing octahedra tilt angles range from 5–95°. In the seventh S2- site, S2- is bonded to two equivalent Sr2+ and three Bi3+ atoms to form distorted SSr2Bi3 square pyramids that share corners with two equivalent SSr4Bi square pyramids, corners with five SSr2Bi3 trigonal bipyramids, edges with two equivalent SSrBi5 octahedra, edges with three SSr4Bi square pyramids, and edges with three equivalent SSr2Bi3 trigonal bipyramids. In the eighth S2- site, S2- is bonded to one Sr2+ and five Bi3+ atoms to form distorted SSrBi5 octahedra that share corners with five SSrBi4 square pyramids, corners with five SSr2Bi3 trigonal bipyramids, edges with two equivalent SSrBi5 octahedra, edges with five SSr4Bi square pyramids, and edges with three SSr2Bi3 trigonal bipyramids.

36 MATERIALS SCIENCE↗
DOE OSTI2020

Materials Data on Sr(BN)2 by Materials Project

Sr(BN)2 crystallizes in the monoclinic C2/m space group. The structure is two-dimensional and consists of one Sr(BN)2 sheet oriented in the (0, 0, 1) direction. Sr2+ is bonded to six equivalent N1- atoms to form edge-sharing SrN6 octahedra. There are two shorter (2.63 Å) and four longer (2.68 Å) Sr–N bond lengths. B is bonded in a single-bond geometry to one N1- atom. The B–N bond length is 1.28 Å. N1- is bonded in a 4-coordinate geometry to three equivalent Sr2+ and one B atom.

36 MATERIALS SCIENCE↗
DOE OSTI2023

Superconducting gap symmetry from Bogoliubov quasiparticle interference analysis on Sr 2 RuO 4

Here, the nature of the superconducting order parameter in Sr 2 RuO 4 has generated intense interest in recent years. Since the superconducting gap is very small, high-resolution methods such as scanning tunneling spectroscopy might be the best chance to directly resolve the gap symmetry. Recently, a Bogoliubov quasiparticle interference imaging (BQPI) experiment has suggested that the d x 2 –y 2 gap symmetry is appropriate for Sr 2 RuO 4 . In this work, we use a material-specific theoretical approach based onWannier functions of the surface of Sr 2 RuO 4 to calculate the continuum density of states as detected in scanning tunneling microscopy experiments. We examine several different proposed gap order parameters and calculate the expected BQPI pattern for each case. Comparing to the available experimental data, our results suggest that a s' + id xy gap order parameter is the most probable state, but the measured BQPI patterns still display features unaccounted for by the theory for any of the states currently under discussion.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗
DOE OSTI2024

La 0.6 Sr 0.4 CoO 3−δ Films Under Deoxygenation: Magnetic And Electronic Transitions Are Apart from The Structural Phase Transition

Abstract Topotactic phase transitions induced by changes in the oxygen vacancy concentration can largely alter the physical properties of complex oxides, including electronic and magnetic phases, while maintaining the structural integrity of the crystal lattice. An oxygen‐vacancy‐induced topotactic phase transition from perovskite (PV) to brownmillerite (BM) is achieved in epitaxial La 0.6 Sr 0.4 CoO 3−δ (LSCO) thin films. Two novel intermediate states with different oxygen content are identified by X‐ray diffraction, which involves a single‐phase reduced PV state and a mixed state of co‐existing PV and BM. The combination of depth‐sensitive polarized neutron reflectometry (PNR) and Rutherford backscattering (RBS) allows a quantitative determination of magnetization and the mean oxygen content in all states, revealing a continuous transition from La 0.6 Sr 0.4 CoO 2.97 to La 0.6 Sr 0.4 CoO 2.5 . BM formation is observed for an LSCO layer with an oxygen content of 2.67, while the magnetic and electronic transition already occurs for a layer with a higher oxygen content of 2.77 (and above) and in the absence of a BM signature. These results demonstrate that the physics of electronic metal‐to‐insulator transition (MIT), magnetic ferromagnet‐to‐non‐ferromagnet transition (FM‐to‐non‐FM), and structural PV‐to‐BM phase transition should be considered within the framework of separate but interrelated processes.

36 MATERIALS SCIENCE↗
DOE OSTI2021

Exploring the Pb 1− x Sr x HfO 3 System and Potential for High Capacitive Energy Storage Density and Efficiency

Abstract The hafnate perovskites PbHfO 3 (antiferroelectric) and SrHfO 3 (“potential” ferroelectric) are studied as epitaxial thin films on SrTiO 3 (001) substrates with the added opportunity of observing a morphotropic phase boundary (MPB) in the Pb 1− x Sr x HfO 3 system. The resulting (240)‐oriented PbHfO 3 ( Pba 2) films exhibited antiferroelectric switching with a saturation polarization ≈53 µC cm −2 at 1.6 MV cm −1 , weak‐field dielectric constant ≈186 at 298 K, and an antiferroelectric‐to‐paraelectric phase transition at ≈518 K. (002)‐oriented SrHfO 3 films exhibited neither ferroelectric behavior nor evidence of a polar P 4 mm phase . Instead, the SrHfO 3 films exhibited a weak‐field dielectric constant ≈25 at 298 K and no signs of a structural transition to a polar phase as a function of temperature (77–623 K) and electric field (–3 to 3 MV cm −1 ). While the lack of ferroelectric order in SrHfO 3 removes the potential for MPB, structural and property evolution of the Pb 1− x Sr x HfO 3 (0 ≤ x < 1) system is explored. Strontium alloying increased the electric‐breakdown strength ( E B ) and decreased hysteresis loss, thus enhancing the capacitive energy storage density ( U r ) and efficiency (η). The composition, Pb 0.5 Sr 0.5 HfO 3 produced the best combination of E B = 5.12 ± 0.5 MV cm −1 , U r = 77 ± 5 J cm −3 , and η = 97 ± 2%, well out‐performing PbHfO 3 and other antiferroelectric oxides.

Acharya, Megha↗
DOE OSTI2020

Synthesis, Structural Characterization and Chemical Bonding of Sr 7 Li 6 Sn 12 and its Quaternary Derivatives with Eu and Alkaline Earth Metal (Mg, Ca, Ba) Substitutions. A Tale of Seven Li‐Containing Stannides and Two Complex Crystal Structures

In this paper, we discuss the synthesis and the structural characterization of the new ternary compound Sr 7 Li 6 Sn 12 and its six quaternary derivatives, where alkaline earth metals (Ca, Mg, Ba) and the rare earth metal Eu are substituted, yielding crystalline phases of monoclinic or orthorhombic symmetry. The title compounds were synthesized via high‐temperature solid‐state reactions of the corresponding elements. The crystal structures were determined by single‐crystal X‐ray diffraction methods. The (Sr,Ca) 7 Li 6 Sn 12 and Eu 7 (Mg,Li) 6 Sn 12 phases represent a new structure type (space group P 2/ m , No. 10) while Sr 7 Li 6 Sn 12 and the rest of the title phases crystallize in the orthorhombic base‐centered space group Cmmm (No. 65) which is similar to the Eu 7 Li 8– x Sn 10+ x ( x ≈ 2.0) phase with the Ce 7 Li 8 Ge 10 structure type (Pearson code oC 50). Careful examination of the resulting structures shows intricate disordering between Li and Sn atoms, which is governed by the total number of valence electrons. The discussion of experimental results is also supported by DFT electronic structure calculations.

Osman, Hussien H.↗
DOE OSTI2024

Stabilization of Catalytically Active Surface Defects on Ga-doped La–Sr–Mn Perovskites for Improved Solar Thermochemical Generation of Hydrogen

Solar thermochemical hydrogen (STCH) production from water splitting typically requires performing redox cycles at temperatures above 1200 °C to reduce and re-oxidize the bulk of a reversible material. Bulk processes such as oxygen vacancy formation and oxygen diffusion energies dictate the viability of a material for STCH. The surface plays an important role in the formation and destruction of vacancies and interacts with gas phase water and surface adsorbed species. These surface processes can lead to surface reconfigurations and even the formation of surface phases with stoichiometry and oxygen content very different from the bulk composition. Understanding in-situ the surface chemical state and its evolution under water splitting is important to design nonstoichiometric oxides capable of longer-lasting STCH generation at lower temperatures. In this work, we describe the water splitting active defect sites in LSM ((La 0.65 Sr 0.35 ) 0.95 MnO 3–δ ) and Ga-doped LSM ((La 0.6 Sr 0.4 ) 0.95 (Mn 0.8 Ga 0.2 )O 3–δ ) perovskites during Operando thermochemical water splitting conditions using ambient-pressure X-ray photoelectron spectroscopy (AP-XPS) experiments at 800 °C under steam. We show that sub-stoichiometric La +3 in the oxygen-vacancy rich surface at operating conditions can be used to correlate surface water splitting activity and the creation of surface hydroxide intermediates. The addition of Ga in LSM is shown to drastically stabilize the surface chemical composition by preventing Sr segregation and stabilizing catalytically active surface defects that promote the binding of adsorbed hydroxides. Here, we use Operando AP-XPS quantification of metastable surface hydroxide intermediates (La(OH) 3 ) to determine the amount of catalytically active surface sites in LSM (2.9%) and in LSMG (7.8–8.1%, depending on the bulk oxidation state).

08 HYDROGEN↗
DOE OSTI2025

Sr 2 MnO 4 as a reactive CO 2 sorbent for sorption-enhanced steam reforming of biogas to green hydrogen

Sorption-enhanced steam biogas reforming is an attractive approach for hydrogen production from renewable resources, with the performance of the CO 2 sorbents being a critical factor. In this study, Sr 2 MnO 4 was investigated as a redox-activated CO 2 sorbent for sustainable hydrogen production from biogas. The Sr 2 MnO 4 sorbents exhibited a CO 2 sorption capacity of over 26 g per 100 g of sorbents, along with excellent cyclic stability in thermogravimetric analysis. Complete regeneration of the sorbent was achieved with a relatively small temperature swing (100 °C). Fixed-bed reactor experiments further demonstrated the application of Sr 2 MnO 4 sorbents in sorption-enhanced steam biogas reforming. Biogas simulants with varying CO 2 contents were converted to ~94 vol% H 2 before CO 2 breakthrough. Stable CO 2 capacity and hydrogen production were maintained over 20 cycles. In addition, optimization of the regeneration duration enabled the generation of highly pure CO 2 and more efficient use of O 2 . These results support the feasibility of biogas-to‑hydrogen conversion with net-negative carbon emissions through integration with CO 2 capture and sequestration.

09 BIOMASS FUELS↗
DOE OSTI2024

Porosity in Sr 1-x Ca x FeO 3-δ oxygen carriers: The role of surface area and pretreatment on storage activity

Perovskite oxides have generated interest as robust, low-temperature oxygen carrier materials for a variety of clean energy applications, including chemical looping gasification and air separations. Methods to improve O 2 desorption kinetics are vital to allow these carriers to compete economically with traditional metal oxide carriers or cryogenic separations. In this report we investigated the cumulative roles that surface area, pretreatment, and elemental composition have on the oxygen storage properties of a state-of-the-art carrier system, Sr 1-x Ca x FeO 3-δ (x = 0.20, 0.25, 0.30) synthesized using multiple methods. Porous materials synthesized by the Pechini, or citrate, method had their surface area controlled using the synthesis temperature. The high surface area of the Sr 0.7 Ca 0.3 FeO 3-δ materials is most beneficial at low operating temperatures, such as 350 and 400 °C, as their reduction rates are twice as fast as those obtained with their bulk counterparts. These effects are observed at higher operating temperatures and within a single composition, but temperature tunability using variable Ca 2+ substitution in the Sr 1-x Ca x FeO 3-δ overshadows the improvements gained from higher surface areas. Additionally, we establish that pretreatment in N2 at an elevated temperature is necessary to enhance kinetics further. For maximum efficiency, pretreatment at the synthesis temperature is suggested for the Pechini method-synthesized systems, whereas 800 °C is adequate for bulk materials.

36 MATERIALS SCIENCE↗
DOE OSTI2022

Overcoming significant challenges in extracting off-stoichiometric thermodynamics using the compound energy formalism through complementary use of experimental and first principles data: A case study of Ba 1-x Sr x FeO 3-δ

The compound energy formalism (CEF) is a powerful framework to describe the thermodynamics of metal oxides as a function of off-stoichiometry, temperature, and composition. The thermodynamic properties are crucial materials design attributes in metal oxide-based oxygen-exchange chemical processes. Despite the richness of information an accurate CEF model provides, a method to determine a unique and accurate fit for oxygen exchange materials remains elusive. This contribution details a method for fitting the CEF model that overcomes the current fitting challenges through three innovations: 1) the combination of density functional theory calculations with experimental data decorrelates excess terms and delineates the enthalpic/entropic contributions to the Gibbs free energy; 2) a systematic determination of the important CEF model terms, removing thermodynamic predetermining human intervention; 3) a self-consistent solution of the starting oxygen offstoichiometry (δ 0 ) of thermogravimetric measurements. Thus, our method enables the reliable extraction of off-stoichiometric metal oxide thermodynamic properties and facilitates rapid materials compositional screening, and reliable process design of systems dependent on off-stoichiometric redox-active metal oxides. We apply this method to a Ba x Sr 1-x FeO 3-δ test case. We find by systematically examining the performance of the CEF model fit with and without each innovation that all three innovations are necessary for an accurate fit. We determined that reduction enthalpy is higher and more sensitive to off-stoichiometry when the Sr fraction is large (139.5 and 185.3 kJ/mol O 2 for SrFeO 3 at δ = 0 and δ = 0.5, respectively vs. nearly constant 83 kJ/mol O 2 for BaFeO 3 ). However, the reduction entropy is mostly insensitive to Sr fraction, but highly dependent on δ suggesting larger contributions in the non-configurational entropy parameters.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2020

Single-Crystal Growth and Room-Temperature Magnetocaloric Effect of X-Type Hexaferrite Sr 2 Co 2 Fe 28 O 46

X-type hexaferrites have been receiving considerable attention due to their promising applications in many magnetic-electronic fields. However, the growth of single-crystal X-type hexaferrite is still a challenge. Herein we reported, for the first time, the preparation of single crystal X-type hexaferrite Sr 2 Co 2 Fe 28 O 46 (Sr 2 Co 2 X) with high-quality and large size using floating-zone method with laser as the heating source. The crystals show rhombohedral symmetry with space group of R-3m (No. 166, a = 5.8935(1) Å and c = 83.7438(17) Å). Co 2+ and Fe 3+ oxidation states were confirmed by the X-ray absorption near-edge spectroscopy. The prepared Sr 2 Co 2 X exhibits a spin reorientation transition from easy-cone to easy-axis at T 2 of 343 K and a ferrimagnetism–paramagnetism transition at Curie temperature (TC) of ~743 K. The spin reorientation transition was accompanied by magnetocaloric effect (MCE). Both conventional and inverse MCEs were observed near T 2 with a magnetic field applied along the c-axis. The maximum value of the magnetic entropy change along the c-axis was evaluated to be 1.1 J/kg·K for a magnetic field change of 5 T.

36 MATERIALS SCIENCE↗
DOE OSTI2021

Effects of Site and Magnetic Disorder on the Oxygen Vacancy Formation and Electronic and Optical Properties of La x Sr 1– x CoO 3–δ and SrFe y Co 1– y O 3–δ [plus supplemental information]

Disorder is an inevitable issue in practical applications of perovskites with the A-site occupied by La/Sr and the B-site occupied by Co/Fe. We performed density functional theory calculations to reveal the site and magnetic disorder effect on the oxygen vacancy formation and the electronic and optical properties of La x Sr 1–x CoO 3–δ and SrFe y Co 1–y O 3–δ systems. Generally, site disorder has little influence on the physical properties we studied, while magnetic disorder has a property-dependent effect for La A-site and Fe B-site doping of SrCoO 3 . Compared to ordered ferromagnetic (FM) calculations, disordered paramagnetic (PM) results can better describe the high-temperature behavior of lattice expansion and the multiple spin states of Co ions in La x Sr 1–x CoO 3 . The oxygen vacancy formation energy results show that the magnetic disorder has a more remarkable effect on SrFe y Co 1–y O 3–δ systems with a robust magnetic order than that on the La x Sr 1–x CoO 3–δ systems with a fragile magnetic order. The electronic structures in the PM phase have less spin polarization and broadened bands, by which the optical absorptions from the single spin channel transition in the FM phase have an obvious change in the magnitude and/or the trend. Furthermore, our work provides guidance for where and why to consider the disorder.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2022

Effect of Multiple Oxygen Vacancies on the Optical and Thermodynamic Properties of La 0.75 Sr 0.25 Co 0.25 Fe 0.75 O 3-δ Perovskite

We report the oxygen vacancy concentration of perovskite changes with the work condition in applications such as oxygen carriers and oxygen sensors. To explore the effect of multiple oxygen vacancies on the optical and thermodynamic properties, we perform first-principles calculations to investigate the formation of multiple oxygen vacancies in the paramagnetic La 0.75 Sr 0.25 Co 0.25 Fe 0.75 O 3-δ . Our results show that the higher VO concentration in La 0.75 Sr 0.25 Co 0.25 Fe 0.75 O 3-δ occurs at the conditions of higher temperatures and lower oxygen partial pressures. The electrons liberated upon oxygen vacancy formation are partially localized on the nearby Fe/Co sites and partially delocalized through the lattice, with the result that the unoccupied Fe/Co states near the Fermi level decrease and the Fermi level shows an upward shift. From the results of optical absorption, the peaks from 250 to 600 nm are weakened and blue-shifted with increase of oxygen vacancy concentration, due to the decrease of empty Fe states and an upward shift of the Fermi level. The obvious change of optical absorption with oxygen vacancy concentration indicates that La 0.75 Sr 0.25 Co 0.25 Fe 0.75 O 3-δ could be a good candidate for optical oxygen sensors in the visible spectrum.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2025

Deep Learning with Reflection High-Energy Electron Diffraction Images to Predict Cation Ratio in Sr 2 x Ti 2(1– x ) O 3 Thin Films

Machine learning (ML) with in-situ diagnostics offers a transformative approach to accelerate, understand, and control thin film synthesis by uncovering relationships between synthesis conditions and material properties. In this study, we demonstrate the application of deep learning to predict the stoichiometry of Sr 2x Ti 2(1–x) O 3 thin films using reflection high-energy electron diffraction images acquired during pulsed laser deposition. A gated convolutional neural network trained for regression of the Sr atomic fraction achieved accurate predictions with a small dataset of 31 samples. Explainable AI techniques revealed a previously unknown correlation between diffraction streak features and cation stoichiometry in Sr 2x Ti 2(1–x) O 3 thin films. Here, our results demonstrate how ML can be used to transform a ubiquitous in-situ diagnostic tool, that is usually limited to qualitative assessments, into a quantitative surrogate measurement of continuously valued thin film properties. Such methods are critically needed to enable real-time control, autonomous workflows, and accelerate traditional synthesis approaches.

77 NANOSCIENCE AND NANOTECHNOLOGY↗
DOE OSTI2021

Intermediate Sr 2 Co 1.5 Fe 0.5 O 6-δ Tetragonal Structure between Perovskite and Brownmillerite as a Model Catalyst with Layered Oxygen Deficiency for Enhanced Electrochemical Water Oxidation

The generation of hydrogen in an environmentally benign way is highly essential to meet future energy demands. However, in the process of splitting water electrochemically, sluggish kinetics of the oxygen evolution reaction (OER) curtails its applicability, as it drags energy input. Herein, we synthesized SrCo-Fe-O oxides to optimize their OER activity by varying the Co/Fe ratio. Among them, Sr 2 Co 1.5 Fe 0.5 O 6-δ exhibited the best OER catalytic activity in the series, with an overpotential of 318 mV at 10 mA cm -2 and Tafel slope of 44.8 mV dec -1 . High-resolution neutron powder diffraction analysis identified an intermediate structure between the perovskite and brownmillerite, with alternating layers of disorderly orientated oxygen-deficient tetrahedra and fully stoichiometric octahedra. The unique stacking of tetrahedral and octahedral units facilitates desired interactions between the electrode surface and electrolyte. Theoretical calculations revealed that increased covalency of Co 3d and O 2p in Sr 2 Co 1.5 Fe 0.5 O 6-δ oxide is another primary contributor to its augmented water oxidation ability. As a model for developing catalysts with such an intermediate structure, the synergetic effect of oxygen vacancy and hybridization between Co 3d and O 2p assured the Sr 2 Co 1.5 Fe 0.5 O 6-δ oxide as a better catalyst for its enhanced OER activity.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2025

SA-GAT-SR: self-adaptable graph attention networks with symbolic regression for high-fidelity material property prediction

Recent advances in machine learning have demonstrated an enormous utility of deep learning approaches, particularly Graph Neural Networks (GNNs) for materials science. These methods have emerged as powerful tools for high-throughput prediction of material properties, offering a compelling enhancement and alternative to traditional first-principles calculations. While the community has predominantly focused on developing increasingly complex and universal models to enhance predictive accuracy, such approaches often lack physical interpretability and insights into materials behavior. Here, we introduce a novel computational paradigm—Self-Adaptable Graph Attention Networks integrated with Symbolic Regression (SA-GAT-SR)—that synergistically combines the predictive capability of GNNs with the interpretative power of symbolic regression. Our framework employs a self-adaptable encoding algorithm that automatically identifies and adjust attention weights so as to screen critical features from an expansive 180-dimensional feature space while maintaining O(n) computational scaling. The integrated SR module subsequently distills these features into compact analytical expressions that explicitly reveal quantum-mechanically meaningful relationships, achieving 23 × acceleration compared to conventional SR implementations that heavily rely on first-principle calculations-derived features as input. This work suggests a new framework in computational materials science, bridging the gap between predictive accuracy and physical interpretability, offering valuable physical insights into material behavior.

36 MATERIALS SCIENCE↗
DOE OSTI2020

Thermodynamic evidence for a two-component superconducting order parameter in Sr 2 RuO 4

Sr 2 RuO 4 has stood as the leading candidate for a spin-triplet superconductor for 26 years. However, recent NMR experiments have cast doubt on this candidacy and it is difficult to find a theory of superconductivity that is consistent with all experiments. Here, the order parameter symmetry for this material therefore remains an open question. Symmetry-based experiments are needed that can rule out broad classes of possible superconducting order parameters. Here, we use resonant ultrasound spectroscopy to measure the entire symmetry-resolved elastic tensor of Sr 2 RuO 4 through the superconducting transition. We observe a thermodynamic discontinuity in the shear elastic modulus c 66 , which implies that the superconducting order parameter has two components. A two-component p-wave order parameter, such as p x + ip y , naturally satisfies this requirement. As this order parameter appears to have been precluded by recent NMR experiments, we suggest that two other two-component order parameters, namely {d xz ,d yz } and {d x 2 –y 2 ,g xy (x 2 –y 2 ) }, are now the prime candidates for the order parameter of Sr 2 RuO 4 .

36 MATERIALS SCIENCE↗