Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “High pressure X-ray diffraction”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 289 records · Page 16
All sourcesNASA NTRSDOE OSTI
DOE OSTI2023

Synchrotron X-ray diffraction of pyrolusite (MnO 2 ) and rutile (TiO 2 ) during heating to ~1000 °C

To compare thermal expansion behaviors in isomorphic structures with different redox behaviors, we separately heated pyrolusite (Mn 4+ O 2 ) and rutile (Ti 4+ O 2 ) powders from 25 to ~1000 °C at a rate of 0.05 °C/s at ambient pressure and analyzed them using synchrotron X-ray diffraction and Rietveld refinement. The pyrolusite exhibited two reduction-induced phase decompositions. Between 531 and 583 °C, pyrolusite decomposed to bixbyite (Mn 3+ 2 O 3 ), and between 972 and 998 °C, bixbyite decomposed to hausmannite (Mn 2+ Mn 3+ 2 O 4 ). The rutile experienced no phase decompositions or transitions over this same temperature interval. The refined bond lengths and angles for pyrolusite showed that the Mn 4+ coordination octahedron became more distorted near the phase decomposition to bixbyite due to the approach of two coordinating oxygen atoms. The 3d electrons of each Mn 4+ ion in pyrolusite make π bonds with the 2p electrons of the surrounding O 2- ions, whereas the Ti 4+ of rutile has no 3d electrons. Thus, π bonding between octahedral Mn 4+ and the surrounding O 2- anions increases the strength of the Mn–O bonds of pyrolusite relative to the Ti–O bonds of rutile. However, we observed a small decrease in O–O distances in pyrolusite before the decomposition, suggesting that at high temperature, increased π bonding between adjacent O anions precedes the release of O 2 and the reduction of Mn 4+ to Mn 3+ . Analogous behavior was observed for bixbyite before its reductive phase decomposition to hausmannite. In contrast, no anomalous changes in the O–O distances occurred for rutile. Our X-ray diffraction analyses provided accurate thermal expansion coefficients for these materials over a broader temperature range than reported in previous studies. The Mn–O bond lengths in pyrolusite were shorter and stronger than the Ti–O bonds of rutile; for example, at 60 °C, bond distances in pyrolusite refined to 1.8854(6) Å whereas the bond lengths of rutile were 1.9575(4) Å. Accordingly, the axial and volumetric thermal expansion coefficients refined for rutile were greater than those for pyrolusite. Further, the axial coefficients of thermal expansion (CTE) for pyrolusite were 96% (a-axis) and 69% (c-axis) of the corresponding values for rutile, and the volumetric CTE for pyrolusite was 85% of that for rutile.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2023

Produced Fluid Induced Mineralogy and Elemental Alterations of Caney Shale, Southern Oklahoma

ABSTRACT This study involves batch reactor experiments and subsequent analyses of samples from Caney Shale in the Ardmore Basin of South-Central Oklahoma. Samples include mainly rock cores and cuttings recovered from two wells respectively drilled vertically through and horizontally across the Caney Shale. Mineralogical compositions are obtained by X-Ray Diffraction (XRD) measurements whilst microstructure and elemental distribution are acquired by Scanning Electron Microscopy/Energy Dispersive Spectroscopy (SEM/EDS) respectively. Batch experiments are then conducted using selected rock samples and produced fluid from the Caney Formation. Deionized water is also reacted with some samples to serve as standard. Experiments are conducted at 95°C and ambient pressure for 7 and 30 days to assess the geochemical rock-fluid interactions. Results show rock mineralogical compositions are predominantly quartz, feldspar, carbonates, and clay with minor pyrite. Post-experimental mineralogical changes observed in samples include increased amorphous entities especially within the clay portions of XRD plots and dissolution of feldspar and carbonate minerals and formation of new mineral phases, mostly clays and salts. These are corroborated by EDS elemental analyses which show decreased elemental compositions. The implications of reactions mentioned above include but not limited to, scale formation, clay fines migration and shale softening all of which pose significant permeability impairment on formation over time. INTRODUCTION Shale reservoirs account for a large share of unconventional reservoirs in the world (Lyu et al., 2015). However, ultra-low permeability and high clay compositions pose significant challenges when producing from these reservoirs (Dawuda and Srinivasan, 2022, 2023). Producing from these reservoirs therefore requires horizontal drilling and hydraulic fracturing technologies which have proven their efficacy in generating substantial permeability in reservoirs to ensure production (Fujian et al., 2019; Liu et al., 2018). Even after expensive horizontal drilling and hydraulic fracturing, geochemical reactions between engineered fluids and formation leads to fracture constriction and adversely impact petrophysical properties (permeability and porosity) of the reservoir. These technologies are therefore under constant development and improvement in various aspects to ensure fine tuning for specific reservoirs. Under present conditions, much of the hydrocarbon reserves in unconventional shale reservoirs are left unproduced due to rapid decline in permeability following resumption to production after hydraulic fracturing. It is therefore essential to understand the range of geochemical reactions that cause rapid depletion of permeability after hydraulic fracturing and apply these to each shale reservoir to ensure substantial recovery rates.

Awejori, G. A.↗
DOE OSTI2025

Side-by-side evaluation of the outgassing rate and ultimate pressure achieved inside tubes made of low-carbon and stainless steel

The hydrogen outgassing rate of a vacuum chamber made of AISI 1020 low-carbon steel was found to be notably smaller than a similar chamber made of AISI 316L stainless steel following heat treatment at 150 °C. When the chambers were baked at 400 °C, the outgassing rate of the 1020 low-carbon steel chamber was approximately 2000 times smaller than that of the 316L stainless-steel chamber. After quantifying hydrogen outgassing rates, vacuum chambers made of 1020 low-carbon steel and 316L stainless steel were heated for a prescribed duration and then pumped with an ion pump and nonevaporable getter pump to reach “ultimate pressure.” The 1020 low-carbon steel chamber reached lower pressures than the 316L stainless-steel chamber. Monte Carlo simulation predictions using the measured hydrogen outgassing rates are in good agreement with the ultimate pressure measurements. Finally, our measurements indicate that low-carbon steel can provide pressures within the extreme high vacuum range (<7.5 × 10 -13 Torr) if care is taken to minimize the surface area contribution from stainless steel.

36 MATERIALS SCIENCE↗
DOE OSTI2023

Single-crystal X-ray diffraction of fluorapatite to 61 GPa

Apatite is a mineral of widespread importance in Earth and planetary science. Here we examine the behavior of a natural fluorapatite (FAp) crystal from Durango (Mexico) under compression to 61 GPa. Single-crystal X-ray diffraction experiments were carried out in a diamond-anvil cell using a synchrotron source. The apatite structure persists up to 32.4 GPa. Birch-Murnaghan equation of state parameters were fit to the pressure-volume data for fluorapatite for two cases: fixing V 0 at its measured ambient value resulted in a bulk modulus, K 0T , of 97.0(8) GPa and a pressure derivative of the bulk modulus, K' 0T , of 3.3(1), while fixing V 0 and K 0T at its ambient value 90.5 GPa (derived from ultrasonically measured elastic constants) resulted in a K' 0T value of 4.1(1). At 35.6 GPa, fluorapatite transforms to a triclinic phase (P$\bar{1}$, Z = 4), designated here as fluorapatite II (FAp-II). This phase persists up to at least 61 GPa. The major structural differences between FAp and FAp-II involve the buckling of the Ca polyhedra along the c-axis and changes in the number and coordination of the Ca sites. Furthermore, our study extends the pressure range over which fluorapatite has been examined by more than a factor of three, providing new insights into its structural response to high-pressure conditions.

58 GEOSCIENCES↗
DOE OSTI2026

Postirradiation Examination of WIRE-21 Experiment Irradiated in the High Flux Isotope Reactor

Westinghouse Electric Company is developing wireless sensors to monitor the centerline temperature and internal pressure of commercial light-water reactor fuel rods during irradiation. Oak Ridge National Laboratory and Westinghouse Electric Company developed the Wireless Instrumented RB Experiment 2021 (WIRE-21) to test wireless temperature and pressure sensor technologies in a removable beryllium position in the High Flux Isotope Reactor. The experiment was irradiated for a total of 75 days, at temperatures ranging from approximately 150°C to 400°C, resulting in a peak fast (energy > 0.1 MeV) neutron fluence of about 3 × 10 21 n/cm 2 . The temperature was intentionally cycled multiple times to compare the response of the wireless temperature sensor to collocated thermocouples. Similarly, the pressure sensor was actuated in multiple steps to compare the response of the wireless measurement to excore pressure transducers (Petrie et al., 2023). After irradiation, the experiment was disassembled in the Irradiated Fuels Examination Laboratory (IFEL) hot cell at Oak Ridge National Laboratory with the intent to recover sensor and dosimetry components, document the as-irradiated condition of the hardware, and investigate possible causes of the sensor behavior observed during irradiation. The postirradiation examination successfully recovered and preserved key WIRE-21 components. After the housing was removed using a milling machine, the internal experiment sections were examined. All eight fiber-optic sensors were recovered, cut, and stored. The silicon carbide thermometry, temperature sensor, pressure sensor, lower spacer, and selected pressure and temperature cable sections were also removed and stored. The metal bellows of the pressure sensor was found to be plastically deformed, indicating that it had been properly pressurized during irradiation and generally behaved as expected. X-ray diffraction analysis of a section of one of the irradiated inductor cores within the pressure sensor was performed and confirmed the presence of phase-pure alpha ferrite (i.e., no unexpected phase transformations). Inductance testing was performed on the irradiated pressure sensor cores using an unirradiated test coil, and DC resistance measurements of the transceiver coils were also performed. The measurements with irradiated inductor cores assembled inside unirradiated coils showed slightly reduced inductance compared to measurements made with unirradiated cores, but the difference was not sufficient to explain the more significant reductions in inductance that were observed in-pile. Therefore, it is suspected that degradation of the inductor coils (specifically the wire wrapping) is responsible for the reduced inductance observed in-pile.

46 INSTRUMENTATION RELATED TO NUCLEAR SCIENCE AND ↗
DOE OSTI2024

Electronic structure and lattice dynamics of 1⁢𝑇−VSe 2 : Origin of the three-dimensional charge density wave

To characterize in detail the charge density wave (CDW) transition of 1⁢𝑇−VSe 2 , its electronic structure and lattice dynamics are comprehensively studied by means of x-ray diffraction, muon spectroscopy, angle resolved photoemission (ARPES), diffuse and inelastic x-ray scattering, and state-of-the-art first-principles density functional theory calculations. Resonant elastic x-ray scattering does not show any resonant enhancement at either V or Se, indicating that the CDW peak at the 𝐾 edges describes a purely structural modulation of the electronic ordering. ARPES experiments identify (i) a pseudogap at 𝑇 > 𝑇⁢ CDW , which leads to a depletion of the density of states in the ML-M'L' plane at 𝑇 < 𝑇⁢ CDW , and (ii) anomalies in the electronic dispersion reflecting a sizable impact of phonons on it. A diffuse scattering precursor, characteristic of soft phonons, is observed at room temperature (RT) and leads to the full collapse of the low-energy phonon (𝜔 1 ) with propagation vector (0.25 0 −0.3) r.l.u. Here, we show that the frequency and linewidth of this mode are anisotropic in momentum space, reflecting the momentum dependence of the electron-phonon interaction (EPI), hence demonstrating that the origin of the CDW is, to a much larger extent, due to the momentum dependent EPI with a small contribution from nesting. The pressure dependence of the 𝜔 1 soft mode remains nearly constant up to 13 GPa at RT, with only a modest softening before the transition to the high-pressure monoclinic C2/m phase. The wide set of experimental data is well captured by our state-of-the art first-principles anharmonic calculations with the inclusion of van der Waals corrections in the exchange-correlation functional. The comprehensive description of the electronic and dynamical properties of VSe 2 reported here adds important pieces of information to the understanding of the electronic modulations in the family of transition-metal dichalcogenides.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗
DOE OSTI2026

Pressure-Induced Chemical Bonding Effects on Lattice and Magnetic Instabilities in Antiferromagnetic Insulating CaMn 2 Sb 2

Exotic quantum phenomena often emerge near an electronic delocalization transition (EDT) from an antiferromagnetic insulating phase to a strongly correlated metallic state under pressure. We report the pressure-induced structural and magnetic evolution of the antiferromagnetic insulator CaMn 2 Sb 2 . Single-crystal X-ray diffraction reveals a first-order phase transition near 5.4 GPa from a trigonal P-3m1 structure to a monoclinic P2 1 /m phase accompanied by a ∼7% volume collapse. Residual electron density analysis at intermediate pressures reveals charge localization along Mn–Sb chains, signaling electronic instability preceding the structural transition. Bonding analysis indicates anisotropic Mn–Sb orbital reconfiguration under pressure, driving a distorted square-pyramidal geometry. Neutron scattering confirms the transition and identifies a pressure-induced incommensurate magnetic order, distinct from the ambient antiferromagnetic state. In the monoclinic phase, zigzag Mn chains exhibit antiferromagnetic coupling along the ac-plane, enabled by enhanced orbital overlap. These results establish CaMn 2 Sb 2 as a model system for studying the coupling of structural distortion, charge redistribution, and magnetic order in layered Mn pnictides under pressure.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2023

Radiation, optical, power flow, and electrical diagnostics at the Z facility: Layout and techniques utilized to operate in the harsh environment

The Z machine is a current driver producing up to 30 MA in 100 ns that utilizes a wide range of diagnostics to assess accelerator performance and target behavior conduct experiments that use the Z target as a source of radiation or high pressures. Here, we review the existing suite of diagnostic systems, including their locations and primary configurations. The diagnostics are grouped in the following categories: pulsed power diagnostics, x-ray power and energy, x-ray spectroscopy, x-ray imaging (including backlighting, power flow, and velocimetry), and nuclear detectors (including neutron activation). We will also briefly summarize the primary imaging detectors we use at Z: image plates, x-ray and visible film, microchannel plates, and the ultrafast x-ray imager. The Z shot produces a harsh environment that interferes with diagnostic operation and data retrieval. We term these detrimental processes “threats” of which only partial quantifications and precise sources are known. Finally, we summarize the threats and describe techniques utilized in many of the systems to reduce noise and backgrounds.

47 OTHER INSTRUMENTATION↗
DOE OSTI2026

Ammonolysis with N 2 -diluted NH 3 suppresses Ta( IV ) defects in BaTaO 2 N and enhances photocatalytic water oxidation

BaTaO 2 N stands out among oxynitride photocatalysts because of its ability to capture visible light and to drive the photoelectrochemical water oxidation reaction. However, its solar energy conversion performance is limited by electron–hole recombination at Ta( IV ) defects in the material. These defects are formed by overreduction of the Ta(v) oxide precursor by excess ammonia under the high temperature conditions during ammonolysis. Here we show for the first time that Ta( IV ) defect concentrations can be lowered by conducting the ammonolysis reaction in mixed NH 3 /N 2 gas. The obtained BaTaO 2 N samples crystallize in the cubic CaTiO 3 structure type and form 200–300 nm faceted nanocrystals, based on X-ray diffraction, scanning electron microscopy, and HRTEM. Electron paramagnetic resonance spectra observe the Ta( IV ) defects at g = 1.999 and confirm an 11-fold reduction for the product synthesized in mixed (0.13 : 1.0 vol) NH 3 /N 2 gas, equivalent to 1.14 × 10 16 cm −3 Ta( IV ) ions. This optimized BaTaO 2 N has nearly twice the photocatalytic oxygen evolution activity (AQE of 6.78% at 400 nm) of a reference material made with 1.0 atm ammonia and 78% higher photoelectrochemical water oxidation photocurrent (0.9 mA cm −2 at 1.23 V vs. RHE) under simulated sunlight. According to X-ray photoelectron spectroscopy, remaining Ta( IV ) defects are concentrated in the surface region of the BaTaO 2 N particles, where >50% of all Ta ions are found in the +4 oxidation state. This surface Ta( IV ) population can be directly observed in Vibrating Kelvin Probe Surface Photovoltage Spectra (VK-SPV) via its 1.2–1.4 eV photovoltage onset. Here, it suggests that the surface Ta( IV ) ions contribute empty d-states 0.5–0.7 eV below the BaTaO 2 N conduction band edge. These findings highlight how the energetics and concentrations of Ta( IV ) defects influence the photoelectrochemical water oxidation ability of BaTaO 2 N. Additionally, the work establishes ammonolysis with diluted NH 3 as a new tool to minimize defects in BaTaO 2 N and to raise its solar energy conversion efficiency toward its theoretical limit. Because of its simplicity, the reduced ammonia pressure strategy will likely be applicable to other oxynitrides, which generally suffer from overreduction problems during ammonolysis.

Salmanion, Mahya [University of California, Davis,↗
DOE OSTI2025

Influence of Compositional Complexity on Amorphization Resistance of Swift Heavy Ion Irradiated Titanate Pyrochlores

Compositionally complex oxides have garnered attention recently for their potential technological applications in harsh environments such as thermal barrier coatings and nuclear waste forms. Therefore, their response to extreme conditions, including high temperature and intense irradiation fields, must be thoroughly investigated. Here, the structural evolution of two pyrochlore oxides with comparable cation size ratio, r A /r B , (Yb 0.2 Er 0.2 Dy 0.2 Tb 0.2 Gd 0.2 ) 2 Ti 2 O 7 and Ho 2 Ti 2 O 7 , was evaluated after irradiation with 946 MeV Au ions up to a fluence of 8 × 10 12 ions/cm2 using synchrotron X-ray diffraction, transmission electron microscopy, and Raman spectroscopy. The overall radiation response is comparable for both titanate oxides and is dominated by a loss of crystallinity. When compared to a series of conventional titanate pyrochlore compositions, the amorphous track diameter of (Yb 0.2 Er 0.2 Dy 0.2 Tb 0.2 Gd 0.2 ) 2 Ti 2 O 7 is slightly larger than that of Ho2Ti2O7 and more in line with the diameter of the endmember with the maximum A-site cation size (Gd 2 Ti 2 O 7 ). Density functional theory calculations suggest that this behavior may be linked to local lattice distortions and the associated energetics of cation antisite formation. TEM and Raman analyses show that a disordered, crystalline shell surrounds the amorphous ion tracks in (Yb 0.2 Er 0.2 Dy 0.2 Tb 0.2 Gd 0.2 ) 2 Ti 2 O 7 , and the corresponding short-range structure resembles a weberite-type atomic arrangement.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2024

Origin of spin-driven ferroelectricity and effect of external pressure on the complex magnetism of the 6⁢ H perovskite Ba 3 ⁢Ho⁢Ru 2⁢ O 9

The compound Ba 3 HoRu 2 O 9 magnetically orders at 50 K (T N1 ), followed by another complex magnetic ordering at 10.2 K (T N2 ). The second magnetic phase transition was characterized by the coexistence of two competing magnetic ground states associated with two different magnetic wave vectors (K 1 = 0.5 0 0 and K 2 = 0.25 0.25 0). The multiferroicity and magnetoelectric coupling were predicted below T N2 in these 4d-based materials. Here, in this work, we have discussed the origin of spin-driven ferroelectricity, which is not known yet, and the nature of magnetoelectric domains. We have investigated the compound through time-of-flight neutron diffraction, synchrotron x-ray diffraction (XRD), ac susceptibility, frequency-dependent complex dielectric spectroscopy, and dc magnetization under external pressure. We have demonstrated that the noncollinear structure involving two different magnetic ions, Ru (4d) and Ho (4f), breaks the spatial inversion symmetry via inverse Dzyaloshinskii-Moriya (DM) interaction through strong 4d-4f magnetic correlation, which shifts the oxygen atoms and results in nonzero polarization. Such an observation of inverse DM interaction from two different magnetic ions which cause ferroelectricity is rarely observed. The stronger spin-orbit coupling of 4d orbital might play a major role in creating DM interaction of noncollinear spins. We have systematically studied the spin and dipolar dynamics, which exhibit intriguing behavior with shorter coherence lengths of second magnetic phase associated with the k 2 wave vector. The results manifest the development of finite-size magnetoelectric domains instead of true long-range ordering, which justifies the experimentally obtained low value of ferroelectric polarization. The lattice parameters and volume show a sharp anomaly at T N2 obtained by analyzing the temperature-dependence XRD, which is consistent with the ferroelectric transition, predicting a noncentrosymmetric space group, $P\bar{6}2c$, for this compound. Furthermore, we have investigated the effect of external pressure on this complex magnetism. The result reveals an enhancement of ordering temperature by the application of external pressure (~1.6 K/GPa). The external pressure might favor stabilizing the magnetic ground state associated with second magnetic phase. Our study shows an unconventional mechanism of spin-driven ferroelectricity involving inverse DM interaction between Ru (4d) and Ho (4f) magnetic ions due to strong 4d-4f cross coupling.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗
DOE OSTI2024

Shock compression of crystalline TeO 2 to the high-pressure fluid regime: Insights from ab initio molecular dynamics simulations

The shock response of fully-dense and porous crystalline tellurium dioxide (TeO 2 ⁠) to the high-pressure and high-temperature fluid regime was investigated within the framework of density functional theory with Mermin’s generalization to finite temperatures. The principal and porous shock Hugoniot curves were predicted from canonical ab initio molecular dynamics (AIMD) simulations, with the phase space sampled along isotherms up to 80 000 K, for densities ranging from ρ = 3 to 17 g/cm 3 . The polymorphs investigated are α-TeO 2 paratellurite (⁠P4 1 2 1 2), TeO 2 cotunnite (⁠Pnma⁠), and TeO 2 post-cotunnite (⁠P2 1 /m⁠). Based on the discontinuity found in the calculated U s – u p slope of TeO 2 post-cotunnite at a shock velocity of U s ≃ 8.35km/s and a particle velocity of u p ≃ 3.64 km/s, the shock melting temperature and pressure are predicted to be ≃ 6500 K and ≃ 170 GPa. Results from the AIMD simulations are in line with the static compression data of TeO 2 paratellurite and cotunnite, and with the recent shock Hugoniot data for single-crystal α- TeO 2 for pressures up to 85 GPa, obtained using the inclined-mirror method and the velocity interferometer system for any reflector combined with powder gun and two-stage light-gas gun.

74 ATOMIC AND MOLECULAR PHYSICS↗
DOE OSTI2023

Multivariate Flexible Framework with High Usable Hydrogen Capacity in a Reduced Pressure Swing Process

Step-shaped adsorption-desorption of gaseous payloads by flexible metal-organic frameworks can facilitate the delivery of large usable capacities with significantly reduced energetic penalties. This is desirable for the storage, transport, and delivery of H 2 , as prototypical adsorbents require large swings in pressure and temperature to achieve usable capacities approaching their total capacities. However, the weak physisorption of H 2 typically necessitates undesirably high pressures to induce the framework phase change. As de novo design of flexible frameworks is exceedingly challenging, the ability to intuitively adapt known frameworks is required. We demonstrate that the multivariate linker approach is a powerful tool for tuning the phase change behavior of flexible frameworks. In this work, 2-methyl-5,6-difluorobenzimidazolate was solvothermally incorporated into the known framework CdIF-13 (sod-Cd(benzimidazolate) 2 ), resulting in the multivariate framework sod-Cd(benzimidazolate) 1.87 (2-methyl-5,6-difluorobenzimidazolate) 0.13 (ratio = 14:1), which exhibited a considerably reduced stepped adsorption threshold pressure while maintaining the desirable adsorption-desorption profile and capacity of CdIF-13. At 77 K, the multivariate framework exhibits stepped H 2 adsorption with saturation below 50 bar and minimal desorption hysteresis at 5 bar. At 87 K, saturation of step-shaped adsorption occurs by 90 bar, with hysteresis closing at 30 bar. These adsorption-desorption profiles enable usable capacities in a mild pressure swing process above 1 mass %, representing 85-92% of the total capacities. Here this work demonstrates that the desirable performance of flexible frameworks can be readily adapted through the multivariate approach to enable efficient storage and delivery of weakly physisorbing species.

08 HYDROGEN↗
DOE OSTI2025

Thermodynamic origin of the pressure-induced Invar effect: General criterion and experimental study of Fe 68 ⁢Pd 32

Synchrotron X-ray diffraction measurements were performed on 57 Fe 68 Pd 32 at multiple pressures and two temperatures in a diamond-anvil cell. Between 4 and 11GPa, the thermal expansion was zero or slightly negative. This pressure-induced Invar effect was studied further with 57 Fe nuclear forward scattering and nuclear resonant inelastic X-ray scattering to obtain information on the pressure-induced changes in both the magnetization and the phonon density of states. Magnetic entropy and phonon entropy were obtained from these results, the latter with additional measurements from inelastic neutron scattering to account for the contributions from Pd atoms. The dependencies of these entropies on pressure gave the magnetic and phonon contributions to thermal expansion. These canceled in the region of pressure-induced Invar behavior, even though they individually increased by more than a factor of 2 below the Curie pressure. The behavior of phonons gives evidence for spin-phonon interactions in Fe 68 Pd 32 . A general explanation of the pressure-induced Invar effect is presented, showing that Invar behavior is typically expected at a pressure P* below a magnetic transition at pressure PC. The difference in pressure P C − P* scales with the fractional reduction in magnetic exchange interaction divided by the average Gr¨uneisen parameter.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗
DOE OSTI2025

Effect of pressure cycling and compression rate on the bcc-hcp transition in an FeNi alloy

Here, we investigate the body-centered cubic (bcc) to hexagonal close-packed (hcp) phase transition in Fe-10wt. %Ni alloy, combining pressure cycling and fast compression with time-resolved synchrotron x-ray diffraction in a dynamic diamond anvil cell. Three pressure cycles were conducted with compression rates ranging from 0.1 to nearly 10 3 GPa/s. During the first cycle with the slowest compression, the observed orientations in the bcc and hcp phases are consistent with the Burgers mechanism, followed by c-axis rotation of the hcp phase consistent with {$10$ $\bar{1}2$} twinning. During the following cycles with fast compression at 10 2 –10 3 GPa/s, the hcp phase exhibits negligible c-axis rotation with a nearly constant c/a ratio of ∼1.61 up to ∼30 GPa, indicating suppression of plastic deformation (especially, twinning) due to sample confinement from the gasket. Notably, the onset pressure of the transition decreases with additional pressure cycling and faster compression, which normally leads to over-pressurization. This suggests that defects or shear induced from the pressure cycling reduces the transition kinetics even during fast compression. These insights into the deformation and transition behavior in an FeNi alloy under multiple dynamic loading cycles can offer guidance for future design of advanced structural alloys and improve our understanding of planetary core processes.

FeNi alloy↗
DOE OSTI2025

Femtosecond temperature measurements of laser-shocked copper deduced from the intensity of the x-ray thermal diffuse scattering

We present 50-fs, single-shot measurements of the x-ray thermal diffuse scattering (TDS) from copper foils that have been shocked via nanosecond laser ablation up to pressures above ∼135 GPa. We hence deduce the x-ray Debye–Waller factor, providing a temperature measurement. The targets were laser-shocked with the DiPOLE 100-X laser at the High Energy Density endstation of the European X-ray Free-Electron Laser. Single x-ray pulses, with a photon energy of 18 keV, were scattered from the samples and recorded on Varex detectors. Despite the targets being highly textured (as evinced by large variations in the elastic scattering) and with such texture changing upon compression, the absolute intensity of the azimuthally averaged inelastic TDS between the Bragg peaks is largely insensitive to these changes, and allowing for both Compton scattering and the low-level scattering from a sacrificial ablator layer provides a reliable measurement of $T/Θ^2_D$, where Θ D is the Debye temperature. We compare our results with the predictions of the SESAME 3336 and LEOS 290 equations of state for copper and find good agreement within experimental errors. We, thus, demonstrate that single-shot temperature measurements of dynamically compressed materials can be made via thermal diffuse scattering of XFEL radiation.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗
DOE OSTI2025

Calibration and characterization of the line-VISAR diagnostic at the HED-HIBEF instrument at the European XFEL

In dynamic-compression experiments, the line-imaging Velocity Interferometer System for Any Reflector (VISAR) is a well-established diagnostic used to probe the velocity history, including wave profiles derived from dynamically compressed interfaces and wavefronts, depending on material optical properties. Knowledge of the velocity history allows for the determination of the pressure achieved during compression. Such a VISAR analysis is often based on Fourier transform techniques and assumes that the recorded interferograms are free from image distortions. In this paper, we describe the VISAR diagnostic installed at the HED-HIBEF instrument located at the European XFEL along with its calibration and characterization. It comprises a two-color (532, 1064 nm), three-arm (with three velocity sensitivities) line imaging system. We provide a procedure to correct VISAR images for geometric distortions and evaluate the performance of the system using Fourier analysis. We finally discuss the spatial and temporal calibrations of the diagnostic. As an example, we compare the pressure extracted from the VISAR analysis of shock-compressed polyimide and silicon.

47 OTHER INSTRUMENTATION↗
DOE OSTI2024

Synthesis and Properties of the Helium Clathrate and Defect Perovskite [He 2– x $^\square$ x ][CaNb]F 6

The defect double perovskite [He 2– x $^\square$ x ][CaNb]F 6 , with helium on its A-site, can be prepared by the insertion of helium into ReO 3 -type CaNbF 6 at high pressure. Upon cooling from 300 to 100 K under 0.4 GPa helium, ~60% of the A-sites become occupied. Helium uptake was quantified by both neutron powder diffraction and gas insertion and release measurements. After the conversion of gauge pressure to fugacity, the uptake of helium by CaNbF 6 can be described by a Langmuir isotherm. The enthalpy of absorption for helium in [He 2– x $^\square$ x ][CaNb]F 6 is estimated to be ~+3(1) kJ mol –1 , implying that its formation is entropically favored. Helium is able to diffuse through the material on a time scale of minutes at temperatures down to ~150 K but is trapped at 100 K and below. The insertion of helium into CaNbF 6 reduces the magnitude of its negative thermal expansion, increases the bulk modulus, and modifies its phase behavior. On compressing pristine CaNbF 6 , at 50 and 100 K, a cubic (Fm$\overline{3}$m) to rhombohedral (R$\overline{3}$) phase transition was observed at <0.20 GPa. However, a helium-containing sample remained cubic at 0.4 GPa and 50 K. CaNbF 6 , compressed in helium at room temperature, remained cubic to >3.7 GPa, the limit of our X-ray diffraction measurements, in contrast to prior reports that upon compression in a nonpenetrating medium, a phase transition is detected at ~0.4 GPa.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗