TATB Thermal Decomposition: An Improved Kinetic Model for Explosive Safety Analysis
Explore the source record for details and available documents.
Materials science, Chemistry - Chemical explosives↗
SEARCH · Engineering Papers
Results for “Differential Experiments”
Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.
Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.
Approximating the linear response of physical chaos
Abstract Parametric derivatives of statistics are highly desired quantities in prediction, design optimization and uncertainty quantification. In the presence of chaos, the rigorous computation of these quantities is certainly possible, but mathematically complicated and computationally expensive. Based on Ruelle’s formalism, this paper shows that the sophisticated linear response algorithm can be dramatically simplified in higher-dimensional systems featuring statistical homogeneity in the physical space. We argue that the contribution of the SRB (Sinai–Ruelle–Bowen) measure gradient, which is an integral yet the most cumbersome part of the full algorithm, is negligible if the objective function is appropriately aligned with unstable manifolds. This abstract condition could potentially be satisfied by a vast family of real-world chaotic systems, regardless of the physical meaning and mathematical form of the objective function and perturbed parameter. We demonstrate several numerical examples that support these conclusions and that present the use and performance of a simplified linear response algorithm. In the numerical experiments, we consider physical models described by differential equations, including Lorenz 96 and Kuramoto–Sivashinsky.
71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗
Measurement of 𝐽∕𝜓and 𝜓(2𝑆)production in 𝑝 +𝑝and 𝑝 +𝑑interactions at 120 GeV
We report the p + p and p + d differential cross sections measured in the SeaQuest experiment for J/psi and psi(2S) production at 120GeV beam energy covering the forward x-Feynman (x(F)) range of 0.5 < x(F) < 0.9. The measured cross sections are in good agreement with theoretical calculations based on the nonrelativistic QCD (NRQCD) using the long-distance matrix elements deduced from a recent global analysis of proton- and pion-induced charmonium production data. The sigma(psi(2S))/sigma(J/psi) cross section ratios are found to increase as x(F) increases, indicating that the q (q) over bar. annihilation process has larger contributions in the psi(2S) production than the J/psi production. The sigma(pd)/2 sigma(pp) cross section ratios are observed to be significantly different for the DrellYan process and J/psi production, reflecting their different production mechanisms. We find that the sigma(pd)/2 sigma(pp) ratios for J/psi production at the forward x(F) region are sensitive to the (d) over bar/(u) over bar flavor asymmetry of the proton sea, analogous to the Drell-Yan process. The transverse momentum (p(T)) distributions for J/psi and psi(2S) production are also presented and compared with data collected at higher center-of-mass energies.
72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗
Simulating topological quantum gates in two-dimensional magnet-superconductor hybrid structures
The creation of topological quantum gates using Majorana zero modes—an outstanding problem in the field of topological quantum computing—relies on our ability to control the braiding process in time and space. Here, we propose two-dimensional magnet-superconductor hybrid structures as a new platformfor the successful implementation of topologically protected √σ z -, σ z - and σ x -quantum gates using Majorana zero modes. Employing a novel theoretical formalism to compute the full timedependent many-body wave-function and utilizing a braiding protocol motivated by recent advances in electron-spin-resonance techniques we simulate quantum gates in 2D systems up to 600 sites, on timescales from a few femto- to nanoseconds. We demonstrate that the braiding process can be visualized in time and space by computing the non-equilibrium local density of states, which is proportional to the time-dependent differential conductance measured in scanning tunneling spectroscopy experiments, allowing us to directly image Majorana world lines.
Superconducting properties and materials↗
Differentially Private DBSCAN
SAND2022-15185 O Differentially Private DBSCAN is a differential private clustering algorithm used for running experiments and conducting data analysis. Sandia National Laboratories is a multimission laboratory managed and operated by National Technology & Engineering Solutions of Sandia, LLC, a wholly owned subsidiary of Honeywell International Inc., for the U.S. Department of Energy's National Nuclear Security Administration under contract DE-NA0003525.
Smith, MichaelReed↗
Low Cost Glass-Ceramic Matrix Composite Heat Exchanger
As part of ARPA-E’s High Intensity Thermal Exchange through Materials and Manufacturing Processes (HITEMMP) program, this project sought to develop novel heat exchanger (HX) capabilities to enable efficient and power dense power generation cycles. This class of HX comes under the category of ceramic/composite materials with the higher temperature goal in the program of ≥1100 °C inlet temperature operation. The enabling capability of this effort is the use of glass-ceramic matrix composite (GCMC) material which provides the high temperature durability of a ceramic, the flaw tolerance of a composite, a significantly faster and lower cost manufacturing process than conventional matrix CMCs and very low porosity levels < 0.5%. For thin-walled HX structures and the need to minimize leakage, the low porosity differentiator is particularly important. RTRC has prior experience with this material system and in the current project advanced the component design and manufacturing methods into new territory to produce features required for effective heat exchange under high pressures. In this approach, silicon carbide fiber is fabricated into a fiber preform using various textile processes. Graphite tooling is used both during the build-up of the fiber preform (interior tooling) and after the fiber preform has been completed (exterior tooling). This tooling assembly is heated to high temperature in an environment that has been evacuated and backfilled with inert gas. A reservoir of specialty glass is present and once the desired temperature has been reached to achieve the desired glass viscosity, an actuator distributes the glass throughout the fiber preform using passageways which are part of the tooling design in a process known as glass transfer molding. After the tooling has been removed, the composite is heat treated to convert the amorphous glass to a crystalline ceramic, providing improved properties. The project was divided into three phases focusing on the following: 1) 10 kW HX design and coupon-level tube sheet fabrication, 2) 10 kW HX fabrication, 3) 50 kW HX fabrication. During Budget Period 1 (BP1), additional risks were encountered and the need for additional funds was agreed upon by ARPA-E program leadership. Due to a variety of factors, the contract modification required nominally 18 months to execute at which time the HITEMMP program was effectively concluding. Because of this and the time that would be required to perform BP2 tasks, it was decided to conclude the project at the end of BP1. During the design of the 10 kW HX, manufacturing constraints were learned and incorporated, leading to a revised configuration for the fiber preform and HX. Heat exchange and pressure drop predictions also played a role in modifying the original design concept to be a higher aspect ratio shell-and-tube HX, simplifying the manufacturing process and improving the heat exchanger performance. Good gravimetric and volumetric thermal power densities of 11.2 kW/kg and 10,200 kW/m3 for the entire HX were projected that involved thermo-structural Finite Element Analysis to determine the structural mass needed for the high operation pressures of 250 bar cold inlet and 80 bar hot inlet. Fiber preforms using textile processes were produced for multiple headered tube sheets. Additional challenges were encountered during the glass transfer molding step for which solutions were identified, but programmatics did not allow them to be implemented in BP1. While complete HX test articles were not fabricated, the benefits of this GCMC material for a variety of high temperature applications remain.
30 DIRECT ENERGY CONVERSION↗
Enhanced Resistance Pines for Improved Renewable Biofuel and Chemical Production (Technical Report)
We completed phenotyping constitutive and inducible oleoresin flow across two seasons, constitutive resin canal number and density and wood terpene content in our ADEPT2 and CCLONES populations. We completed genetic association between 19 oleoresin phenotypes and a total of 523,192 SNP markers from ADEPT2 and 13,883 SNP markers in CCLONES using four mixed linear models. A total of 293 significant SNPs (FDR = 0.20) were identified. We used the MENTOR tool to mine mechanistic connections from a multiplex network constructed from poplar multi-omic data to construct a conceptual model for a subset of these significant SNPs. Our model contains 6 transcriptional regulators in addition to 3 monoterpene synthases. To generate more lines of evidence for these significant SNPs, we completed a time course RNAseq experiment after inducing vascular zone cells to differentiate into new resin canals with a methyl jasmonate treatment, a single nuclei RNAseq that identified differentiating resin canal epithelial cells and are completing analysis for a QTL study in a hybrid pine population. The time course identified 4634 significantly down and 1890 significantly up regulated transcripts after treatment with methyl jasmonate, an inducer of new resin canal formation in the vascular cambial meristem. To analyze this large set of differentially regulated genes, we created a predictive expression network and analyzed it with random walk restart using 6 seed genes coding for transcription factors regulating xylem differentiation in poplar. Of the top ranked 200 transcripts, 119 transcripts were significant differentially expressed supporting these transcripts as potential candidates regulating resin canal formation. Analysis of single nuclei sequencing of shoot tips that contain differentiating resin canals, identified 10 clusters. One cluster was highly enriched in transcripts coding for 9 of the enzymes in the MEP pathway 3 prenyl synthetases, and 3 monoterpene synthases strongly suggesting that this cluster represents resin canal epithelial cells. We are mining the additional transcripts to create a trajectory analysis. In summary, we have identified > 10 novel genes that are strongly supported candidates for further analysis in breeding lines and for genetic engineering over- and under- expressing lines to increase wood terpene content to improve resistance to insect and fungal pathogens while simultaneously increasing terpene supplies for renewable chemicals and biofuels.
59 BASIC BIOLOGICAL SCIENCES↗
Screening and qualification methodology for SiC end plug processing methods
Deployment of SiC-ceramic-based fuel cladding for light water reactors requires a hermetic end plug–to–cladding joint that can withstand neutron irradiation during normal operation and maintain integrity during design-basis accidents. Reactor experiments have shown that some SiC composite tubes with SiC end plugs can retain hermeticity after irradiation. However, achieving consistent joint performance under irradiation remains a key challenge. Resolving this issue is essential to enable integral irradiation testing and to demonstrate fuel integrity under commercial-reactor irradiation conditions. This report aims to: (1) provide guidance for designing radiation-tolerant end plug joints for SiC cladding; (2) demonstrate experimental methods to detect processing defects that are unstable under neutron irradiation at light-water-reactor-relevant temperatures and doses; and (3) outline a step-by-step approach for designing and conducting reactor experiments to screen joining methods. The resulting data will be used to improve joint processing and to define critical defect types and sizes that must be detected and eliminated through non-destructive evaluation for quality assurance. Based on prior irradiation experiments at the High Flux Isotope Reactor, differential swelling among the cladding, bonding layer, and end plug was identified as an underlying mechanism for irradiation-induced joint degradation. Accordingly, this effect must be considered in the design of radiation-tolerant joining techniques. In this work, miniature SiC end plug joint specimens irradiated during the previous project were analyzed using X-ray computed tomography to characterize the joint microstructure. Digital volume correlation of the tomography data quantified radiation-induced microstructural changes and enabled evaluation of defect-related risks. Finally, ongoing neutron irradiation efforts using larger specimen volumes are presented. These efforts aim to statistically assess joint performance and to build a microstructure–performance (e.g., leak-tightness) dataset to inform processing improvements and quality control.
22 GENERAL STUDIES OF NUCLEAR REACTORS↗
Angular distributions of thick target bremsstrahlung compared with experiment
Thin target Born approximation for deriving thick target spectrum differential expression in photon energy and emission angle
Scott, W. W.↗
Low energy electron-molecule scattering experiments and the theory of rotational excitation
Experimental techniques for differential, total and momentum transfer electron-molecule scattering cross sections at low electron energies, discussing rotational excitation
Gerjuoy, E.↗
Regulatory Biology: Depressed Metabolic States
Exobiological aspects of depressed metabolism and thermoregulation are discussed for subsequent development of biological space flight experiments. Included is a brief description of differential hypothermia in cancer chemotherapy.
Holton, E. M.↗
Active experiments in modifying spacecraft potential: Results from ATS-5 and ATS-6
The processing of data from onboard spacecraft instruments are described. The modification of spacecraft potentials is reviewed. Analysis of this data yielded the following results: (1) electron emission (E approximately 10 electron-volts) did not perturb the status of a satellite at low potential the absolute value of phi approximately 50 volts by more than 50 volts (the ATS 5 low energy limit), (2) emission of a low energy plasma (E approximatey 10 volts) does not change low potentials (the absolute value of phi approximately 5 volts) by more than a few volts (ATS 6 low energy resolution), (3) when ATS 6 entered eclipse in the presence of a high energy plasma (10 keV), the neutralizer suppressed any rise in the absolute value of phi (within a few volts resolution), (4) when the electron emitter on ATS 5 operated, it served to discharge negative potentials from thousands to hundreds of volts, and (5) when the neutralizer on ATS 6 was operated, it served to discharge kilovolt potentials to below 50 volts. Low altitude (100 - 300 km) experiments with KV electron beams are studied. Differential charging was eliminated by the operation of the main thruster on ATS 6 clamped on the spacecraft at -5 volts.
Olsen, R. C.↗
Cumulus cloud venting of mixed layer ozone
Observations are presented which substantiate the hypothesis that significant vertical exchange of ozone and aerosols occurs between the mixed layer and the free troposphere during cumulus cloud convective activity. The experiments utilized the airborne Ultra-Violet Differential Absorption Lidar (UV-DIAL) system. This system provides simultaneous range resolved ozone concentration and aerosol backscatter profiles with high spatial resolution. Evening transects were obtained in the downwind area where the air mass had been advected. Space-height analyses for the evening flight show the cloud debris as patterns of ozone typically in excess of the ambient free tropospheric background. This ozone excess was approximately the value of the concentration difference between the mixed layer and free troposphere determined from independent vertical soundings made by another aircraft in the afternoon.
Ching, J. K. S.↗
Cumulus cloud venting of mixed layer ozone
Observations are presented which substantiate the hypothesis that significant vertical exchange of ozone and aerosols occurs between the mixed layer and the free troposphere during cumulus cloud convective activity. The experiments utilized the airborne Ultra-Violet Differential Absorption Lidar (UV-DIAL) system. This system provides simultaneous range resolved ozone concentration and aerosol backscatter profiles with high spatial resolution. Evening transects were obtained in the downwind area where the air mass had been advected. Space-height analyses for the evening flight show the cloud debris as patterns of ozone typically in excess of the ambient free tropospheric background. This ozone excess was approximately the value of the concentration difference between the mixed layer and free troposphere determined from independent vertical soundings made by another aircraft in the afternoon.
Ching, J. K. S.↗
Laboratory experiments on planetary and stellar convection performed on Spacelab 3
Experiments on thermal convection in a rotating, differentially heated hemispherical shell with a radial buoyancy force were conducted in an orbiting microgravity laboratory. A variety of convective structures, or planforms, were observed, depending on the magnitude of the rotation and the nature of the imposed heating distribution. The results are compared with numerical simulations that can be conducted at the more modest heating rates, and suggest possible regimes of motion in rotating planets and stars.
Hart, J. E.↗
A conceptual design study for the EOS Lidar Atmospheric Sounder and Altimeter facility
A preliminary design study is presented for the Lidar Atmospheric Sounder and Altimeter (LASA), an active remote sensor for the Earth Observing System. LASA is designed to measure the global vertical distributions of aerosols, cloud top heights, atmospheric trace gases, atmospheric temperature and pressure, and the height of the PBL. The measurements are made using optical radar, differential absorption lidar, and laser altimetry. An experiment proposed for the LASA facility, the EOS Atmospheric Global Lidar Experiment (EAGLE) is described in detail. The EAGLE program is planned to determine aerosol and cloud distributions, water vapor concentrations, and temperature profiles over the troposphere and aerosol distribution over the stratosphere. The measurement techniques, receiver system, and transmitter for the EAGLE program are examined and the conceptual design of the EAGLE experiment and the LASA/EAGLE interface is outlined.
Mauldin, Lemuel E., III↗
Early results from the Cosmic Background Explorer (COBE)
Data obtained with the FIR Absolute Spectrophotometer, Differential Microwave Radiometers, and Diffuse IR Background Experiment (DIRBE) on the COBE satellite since its launch in November 1989 are briefly characterized. The COBE spacecraft and its 900-km 99-deg orbit are described; the scientific goals and capabilities of the instruments are reviewed; and sample DIRBE data are presented in a map and graph. Upper limits on the Comptonization parameter (y less than 0.001) and the chemical potential (mu less than 0.01 at the 3sigma level) are determined, and the spectrum of the dipole anisotropy is shown to be that of a Doppler-shifted blackbody. The DIRBE 100-micron sky brightness values at the ecliptic poles are found to be significantly lower than those measured by IRAS.
Mather, J. C.↗
Processes of deep terrestrial mantles and cores
Ultrahigh pressure experiments are currently focused on revealing processes occurring deep inside planets. This is in addition to the traditional emphasis on the constitution of planetary interiors, such as the identification of the high pressure perovskite phase of (Mg,Fe)SiO3 as the predominant mineral inside the Earth, and probably Venus. For example, experiments show that the mechanism of geochemical differentiation, separation of partial melts, differs fundamentally in the lower mantles of Earth and Venus than at near surface conditions. In addition to structural transformations, changes in chemical bonding caused by pressure can also be significant for planetary interiors. Measurements of AC and DC electrical conductivity can be obtained at ultrahigh pressures and temperatures, to greater than 80 GPa and 3000 K simultaneously, using the laser heated diamond cell. Anhydrous lower mantle assemblages (perovskite + or - oxide phases) exhibit an electrical conductivity that depends strongly on Fe content. Contrary to traditional assumptions, temperature affects the conductivity of lower mantle assemblages relatively little. The Earth's deep focus seismicity can be explained by the recycling of water into the mantle.
Jeanloz, Raymond↗