Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “Water Purification”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 271 records · Page 15

Cation selectivities in zwitterion grafted nanopores: effect of zwitterion architecture

Selective separation of monovalent cations is a critical challenge in applications such as water purification and lithium recovery from salt brines. Cross-linked zwitterionic amphiphilic copolymer (ZAC-X) membranes have gained attention for their exceptional anion permselectivity, attributed to self-assembled zwitterion-lined nanodomains that interact preferentially with anions according to their hydrated radii r hyd . However, these membranes show minimal selectivity among monovalent cations, despite significant differences in their hydration structures, motivating studies on the underlying mechanisms of cation transport and selectivity in this family of materials. In this study, we conducted molecular dynamics simulations of aqueous salt solutions within zwitterion-functionalized nanopores to elucidate the influence of dipole orientation of the zwitterionic (ZI) ligands on cation diffusivities, partitioning, and permeabilities. To this end, we examined two contrasting ZI ligand architectures: Motif A (surface–cation–anion, S–ZI + –ZI − ) and Motif B (surface–anion–cation, S–ZI − –ZI + ). Our results show that in Motif A, the sulfonate groups of the ZI ligands are localized near the pore center radially, leading to strong electrostatic interactions with small bare cations (Mg 2+ and Li + ). This configuration results in high cation partitioning but low cation diffusion, maintaining solution-diffusion tradeoff typical of functionalized membranes. In contrast, Motif B show that sulfonate groups shift radially toward the mid-region of the pore. This shift, especially for small bare cations, introduces steric constraints that weaken their interactions with the sulfonate groups, thereby enhancing hydration and lowering partitioning, while still maintaining their low self-diffusivity. These findings establish zwitterion dipole orientation as a powerful design lever for tuning cation selectivity in membrane systems and offer molecular-level insights for engineering next-generation ion separation materials.

Morishita, Kazuya [Univ. of Texas, Austin, TX (Uni↗

Maximizing sunlight absorption in narrow bandgap semiconducting copper(I) iodides for enhanced photocatalytic dye degradation

Photocatalytic dye degradation leverages sunlight to break down dyes and pigments into safer, simpler molecules. Using a material that can absorb a broad range of the solar spectrum optimizes the speed and efficiency of this process. In this study, we explore a series of new, narrow bandgap copper iodide semiconductors (1.5–1.7 eV) with various dimensionalities (0D to 3D) to evaluate their photocatalytic efficiency in dye degradation. The most effective material achieved 95% degradation within just 27 minutes. Mass spectrometry provided a detailed insight and in-depth understanding into the degradation mechanism. All materials demonstrated excellent stability under ambient conditions, highlighting their promise as eco-friendly candidates for dye degradation in water purification.

Carignan, Gia M. [Rutgers Univ., Piscataway, NJ (U↗

Stabilization of graphene nanopore

Graphene is an ultrathin, impervious membrane. The controlled introduction of nanoscale pores in graphene would lead to applications that involve water purification, chemical separation, and DNA sequencing. However, graphene nanopores are unstable against filling by carbon adatoms. Using aberration-corrected scanning transmission electron microscopy and density-functional calculations, we report that Si atoms stabilize graphene nanopores by bridging the dangling bonds around the perimeter of the hole. Si-passivated pores remain intact even under intense electron beam irradiation, and they were observed several months after the sample fabrication, demonstrating that these structures are intrinsically robust and stable against carbon filling. Theoretical calculations reveal the underlying mechanism for this stabilization effect: Si atoms bond strongly to the graphene edge, and their preference for tetrahedral coordination forces C adatoms to form dendrites sticking out of the graphene plane, instead of filling the nanopore. Our results provide a novel way to develop stable nanopores, which is a major step toward reliable graphene-based molecular translocation devices.

77 NANOSCIENCE AND NANOTECHNOLOGY↗

Free-standing membrane incorporating single-atom catalysts for ultrafast electroreduction of low-concentration nitrate

The release of wastewaters containing relatively low levels of nitrate (NO 3 ⁻) results in sufficient contamination to induce harmful algal blooms and to elevate drinking water NO 3 ⁻ concentrations to potentially hazardous levels. In particular, the facile triggering of algal blooms by ultra-low concentrations of NO 3 ⁻ necessitates the development of efficient methods for NO 3 ⁻ destruction. However, promising electrochemical methods suffer from weak mass transport under low reactant concentrations, resulting in long treatment times (on the order of hours) for complete NO 3 ⁻ destruction. In this study, we present flow-through electrofiltration via an electrified membrane incorporating nonprecious metal single-atom catalysts for NO 3 ⁻ reduction activity enhancement and selectivity modification, achieving near-complete removal of ultra-low concentration NO 3 ⁻ (10 mg-N L -1 ) with a residence time of only a few seconds (10 s). By anchoring Cu single atoms supported on N-doped carbon in a carbon nanotube interwoven framework, we fabricate a free-standing carbonaceous membrane featuring high conductivity, permeability, and flexibility. The membrane achieves over 97% NO 3 ⁻ removal with high N 2 selectivity of 86% in a single-pass electrofiltration, which is a significant improvement over flow-by operation (30% NO 3 ⁻ removal with 7% N 2 selectivity). This high NO 3 ⁻ reduction performance is attributed to the greater adsorption and transport of nitric oxide under high molecular collision frequency coupled with a balanced supply of atomic hydrogen through H 2 dissociation during electrofiltration. Overall, our findings provide a paradigm of applying a flow-through electrified membrane incorporating single-atom catalysts to improve the rate and selectivity of NO 3 ⁻ reduction for efficient water purification.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Correlating surface adsorbate configuration and electrochemical performance of IrO 2 during seawater-relevant electrolysis

Seawater electrolysis alleviates freshwater demand to produce clean hydrogen while eliminating the need for water purification steps. The anodic process, seawater oxidation, typically requires high overpotentials and yields low selectivity to oxygen via the oxygen evolution reaction (OER), primarily due to the competing chlorine evolution reaction (CER) and hypochlorite evolution reaction (HCER) in pH-neutral conditions. Here, combining in situ surface-enhanced Raman characterization, grand canonical density functional theory-based calculations, and kinetic Monte Carlo simulations, we report the evolution of surface adsorbate configurations driven by applied potential and pH during seawater-relevant OER over IrO 2 , a highly OER-active and chloride-corrosion-resistant catalyst. As a result, the chemical properties of active sites, and thereby the kinetics of OER and CER/HCER, are effectively tuned. However, it is revealed that there is no optimal combination of potential and pH to achieve both high activity and high selectivity for seawater-relevant OER. To address this limitation, we establish a correlation between activity/selectivity and surface adsorbate configurations, enabling the optimization of highly active and OER-selective IrO 2 -based catalysts in seawater-relevant oxidation by modulating the local adsorbate environment of active sites.

08 HYDROGEN↗

A surface mechanism for O 3 production with N 2 addition in dielectric barrier discharges

Ozone, O 3 , is a strong oxidizing agent often used for water purification. O 3 is typically produced in dielectric barrier discharges (DBDs) by electron-impact dissociation of O 2 , followed by three-body association reactions between O and O 2 . Previous studies on O 3 formation in low-temperature plasma DBDs have shown that O 3 concentrations can drop to nearly zero after continued operation, termed the ozone-zero phenomenon (OZP). Including small (<4%) admixtures of N 2 can suppress this phenomenon and increase the O 3 production relative to using pure O 2 in spite of power deposition being diverted from O 2 to N 2 and the production of nitrogen oxides, N x O y . The OZP is hypothesized to occur because O 3 is destroyed on the surfaces in contact with the plasma. Including N 2 in the gas mixture enables N atoms to occupy surface sites that would otherwise participate in O 3 destruction. The effect of N 2 in ozone-producing DBDs was computationally investigated using a global plasma chemistry model. A general surface reaction mechanism is proposed to explain the increase in O 3 production with N 2 admixtures. The mechanism includes O 3 formation and destruction on the surfaces, adsorption and recombination of O and N, desorption of O 2 and N 2 , and NO x reactions. Without these reactions on the surface, the density of O 3 monotonically decreases with increasing N 2 admixture due to power absorption by N 2 leading to the formation of nitrogen oxides. With N-based surface chemistry, the concentrations of O 3 are maximum with a few tenths of percent of N 2 depending on the O 3 destruction probability on the surface. The consequences of the surface chemistry on ozone production are less than the effect of gas temperature without surface processes. An increase in the O 3 density with N-based surface chemistry occurs when the surface destruction probability of O 3 or the surface roughness was decreased.

54 ENVIRONMENTAL SCIENCES↗

Atomic layer deposition-based functionalization of materials for medical and environmental health applications

Nanoporous alumina membranes exhibit high pore densities, well-controlled and uniform pore sizes, as well as straight pores. Owing to these unusual properties, nanoporous alumina membranes are currently being considered for use in implantable sensor membranes and water purification membranes. Atomic layer deposition is a thin-film growth process that may be used to modify the pore size in a nanoporous alumina membrane while retaining a narrow pore distribution. In addition, films deposited by means of atomic layer deposition may impart improved biological functionality to nanoporous alumina membranes. In this study, zinc oxide coatings and platinum coatings were deposited on nanoporous alumina membranes by means of atomic layer deposition. PEGylated nanoporous alumina membranes were prepared by self-assembly of 1-mercaptoundec-11-yl hexa(ethylene glycol) on platinum-coated nanoporous alumina membranes. The pores of the PEGylated nanoporous alumina membranes remained free of fouling after exposure to human platelet-rich plasma; protein adsorption, fibrin networks and platelet aggregation were not observed on the coated membrane surface. Zinc oxide-coated nanoporous alumina membranes demonstrated activity against two waterborne pathogens, Escherichia coli and Staphylococcus aureus. The results of this work indicate that nanoporous alumina membranes may be modified using atomic layer deposition for use in a variety of medical and environmental health applications.

antimicrobial↗

Active mechanisorption driven by pumping cassettes

Pumping macrocycles onto surfaces Numerous chemical processes, ranging from water purification to catalysis, involve sorption of small molecules onto surfaces. Typically, spontaneous attractive interactions favor the binding event. Feng et al . report a mechanisorption process that requires redox manipulations to pump macrocycles from bulk solution onto axles immobilized on a metal-organic framework. The resulting rotaxanes store energy through nonequilibrium charge concentration in their mechanical bonds. Ultimately, the technique could also prove useful for actively partitioning compounds with particular functionality between surface and bulk environments. —JSY

Science & Technology - Other Topics↗

Hydrometeorological Hazards: Monitoring, Forecasting, Risk Assessment, and Socioeconomic Responses

Hydrometeorological hazards are caused by extreme meteorological and climate events, such as floods, droughts, hurricanes, tornadoes, or landslides. They account for a dominant fraction of natural hazards and occur in all regions of the world, although the frequency and intensity of certain hazards, and society’s vulnerability to them, differs between regions. Severe storms, strong winds, floods and droughts develop at different spatial and temporal scales, but all can become disasters that cause significant infrastructure damage and claim hundreds of thousands of lives annually worldwide. Oftentimes, multiple hazards can occur simultaneously or trigger cascading impacts from one extreme weather event. For example, in addition to causing injuries, deaths and material damage, a tropical storm can also result in flooding and mudslides, which can disrupt water purification and sewage disposal systems, cause overflow of toxic wastes, and increase propagation of mosquito-borne diseases.

Wu, Huan↗

Wetlands Geoprocessor (v 1.0)

Wetlands have often been described as the “Earth’s kidneys” because wetlands have the ability filter pollutants and purify water. Based upon wetland storage capacity, average daily flow, and inflow nutrient loading this model estimates potential load reductions of nitrate and orthophosphate) from a constructed surface flow wetland (CW). The model relies upon equations, coefficients, and models provided by Cheng et al. 2020 and Cheng & Basu 2017. Nitrogen (N) and phosphorus are important nutrients to ecosystems, but high concentrations can lead to water quality issues. Major sources of these nutrients come from agricultural areas where fertilizer is applied in large quantitates and/or animal waste is present. Excess nitrate and phosphorus may result in overgrowth of algae, which can decrease the dissolved oxygen in water, thereby harming and killing fish and other aquatic species. This model evaluates water purification results and estimates cost to install a surface flow constructed wetlands.

Davis, Cleve↗

Building Advanced Materials via Particle Aggregation and Molecular Self-Assembly

Hierarchical and other advanced materials have attracted increasing attention due to their unique physical and chemical properties, which strongly depend on morphology and size.1-2 These materials have been applied in important technological fields such as energy, catalysis, optical devices, water purification, pollutant removal, CO2 sequestration, and biomedicine.3-7 Particle-based crystallization and self-assembly of molecules are important pathways to synthesize advanced materials of complex structures.8-11 Unlike monomer-by-monomer addition or Ostwald ripening, particle-based crystallization occurs via particle-by-particle addition, to form larger crystals or clusters.8, 12 To date, numerous advanced materials have been synthesized in the lab using particle-based crystallization. Examples include metals such as Pt, Pd, Au, Ag, and Cu;13 alloys such as Pt-Ni, Pt-Cu, Pt-Fe, and Au-Ag;14 metal oxides such as ZnO, TiO2, CuO, and a-Fe2O3, Fe3O4;15-19 and metal sulfides such as PbS, PbSe, ZnS, and CdS.20-21 In addition, particle aggregation-based crystallization has been observed in nature, such as in various geological and biological minerals including calcite, collagen, and others.22-24 Different from the particle-based crystallization, self-assembly of molecules has also been used to build advanced materials such as molecular clusters and nanoparticles. For instance, advanced luminescent materials have been prepared by aggregation-induced emission (AIE) of intrinsically non-emissive molecules.25-26 One of the challenges facing this fast-growing field of advanced materials is to develop a fundamental understanding of the interactions between particles or molecules in a growth medium and the resulting response dynamics.

Zhang, Xin↗

Plasmas in Multiphase Media: Bubble Enhanced Discharges in Liquids and Plasma/Liquid Phase Boundaries

In this research project, the interaction of atmospheric pressure plasmas with multi-phase media was computationally investigated. Multi-phase media includes liquids, particles, complex materials and porous surfaces. Although this investigation addressed fundamental plasma transport and chemical processes, the outcomes directly and beneficially affected applications including biotechnology, medicine and environmental remediation (e.g., water purification). During this project, we made advances in our understanding of the interaction of atmospheric pressure plasmas in the form of dielectric barrier discharges and plasma jets with organic materials and liquids. We also made advances in our ability to use computer modeling to represent these complex processes. We determined the method that atmospheric pressure plasmas flow along solid and liquid surfaces, and through endoscopic like tubes, deliver optical and high energy ion activation energy to organic and liquid surfaces, and produce reactivity in thin liquid layers, as might cover a wound. We determined the mechanisms whereby plasmas can deliver activation energy to the inside of liquids by sustaining plasmas in bubbles. These findings are important to the advancement of new technology areas such as plasma medicine

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Interfacial Behavior of Polymers: Using Interfaces to Manipulate Polymers

The self-assembly of block copolymers into arrays of nanoscopic domains with areal densities approaching 10 terbit/in2 offer tremendous promise for the fabrication of ultrahigh density storage devices, batteries and other energy relevant devices. Interfacial interactions play a key role in dictating the orientation and ordering of these self-assembling materials. We have investigated the use of preferential and neutral solvents to overcome interfacial interactions and to rapid accelerate the dynamics of these materials, since the high molecular weight of the polymers significantly slows diffusion processes. Using a tailor-made chamber, we have introduced solvent vapor annealing (SVA) where solvent with a well-defined vapor pressures sells the copolymer film, enabling control over the solvent content in the film and, therefore, the thermodynamics governing the microphase separation of the copolymer, the interactions with the substrate and air interfaces and the dynamics. This tailor-made chamber also allows us to perform in situ grazing incidence x-ray scattering studies where the copolymer films can be characterized on the nanoscopic level over macroscopic distances. The methodologies developed in our laboratories are now used in numerous laboratories world-wide. We have found that arrays of block copolymer microdomains with perfect orientational order can be achieved over macroscopic areas using the SVA processes but the translational order is perturbed during the film drying process. As the copolymer film is swollen, the confinement of the film to the substrate introduces a frustration to the ordering of the microdomains. After equilibrium is achieved, when the swollen films are brought very close to the ordering transition, near perfect ordering is achieved. However, upon removal of the solvent, the confinement of the film to the substrate introduces translational disorder. We have investigated the influence of the rate of solvent removal and have found that most rapid solvent removal process drives the copolymer film to below its glass transition temperature, freezing in the lateral order. We have quantitatively described the ordering and the parameters influencing the disruption of the ordering in these studies. We have also used e-beam lithography to generate shallow trench patterns on planar surface where the topographic patterning provides an additional constraint on the self-assembly of the block copolymer. The pitches of the trenches were varied while the depth and the trench width of patterns were maintained by constant at 89 and 30nm, respectively. Unidirectional PS-b-PEO line patterns over large area on the shallow trench patterns were obtained by solvent vapor annealing. We extended the solvent annealing process to an in-line coating process using a mini-slot die coater developed in our laboratories. This coater uses minimal materials with operating parameters that can mimic actual industrial processing on a roll-to-roll line. Most important, with this mini-slot die coater, it could also characterize the structure of the film using grazing incidence x-ray scattering. Using the fundamental characterization of the ordering of the block copolymers, we could optimize the coating conditions to enhance lateral ordering of block copolymer in a well-defined manner. The structures produced in this process are directly transferable to flexible electronics where the arrays of block copolymer microdomains can be used for the fabrication of nanostructured components. We have also controlled the orientation of BCP microdomains at the air and substrate interfaces by manipulating the interfacial interactions with selective solvents. This has enabled us to generate nanoporous membranes where the size of the pores is dictated by the size of the bloc copolymer microdomains. We have produced robust nanoporous membranes that can tolerate high pressures and have high throughput using thick films of block copolymers. Exceptional size selectivity has been achieved. The membranes are tolerant against acid and base washing and can be prepared over large areas. These membranes are finding applications in a water-purification and separations processes.

36 MATERIALS SCIENCE↗

Waste Water for Power Generation via Energy Efficient Selective Silica Separations

Silica is ubiquitous in produced and industrial waters, and plays a major disruptive role in water recycle. Herein we have investigated the use of mixed oxides for the removal of silica from these waters, and their incorporation into a low cost and low energy water purification process. High selectivity hydrotalcite (HTC, (Mg 6 Al 2 (OH) 16 (CO 3 )•4H 2 O)), is combined in series with high surface area active alumina (AA, (Al 2 O 3 )) as the dissolved silica removal media. Batch test results indicated that combined HTC/AA is a more effective method for removing silica from industrial cooling tower wasters (CTW) than using HTC or AA separately. The silica uptake via ion exchange on the mixed oxides was confirmed by Fourier transform infrared (FTIR), and Energy dispersive spectroscopy (EDS). Furthermore, HTC/AA effectively removes silica from CTW even in the presence of large concentrations of competing anions, such as Cl - , NO 3 - HCO 3 - , CO 3 2- and SO 4 2- . Similar to batch tests, Single Path Flow Through (SPFT) tests with sequential HTC/AA column filtration has very high silica removal too. Technoeconomic Analysis (TEA) was simultaneously performed for cost comparisons to existing silica removal technologies.

24 POWER TRANSMISSION AND DISTRIBUTION↗

Durable, Impermeable Brazes for Solid Oxide Fuel Cells (Final Report)

To develop a new braze to replace the current state-of-the-art Ag-CuO reactive air braze (RAB), two approaches were proposed: 1) development of a new, self-passivating, silver-free braze and 2) development of a CuO-free, silver-based braze. For the first approach, an integrated computational-experimental method was used. Thermo-Calc® was utilized to quickly screen through hundreds of alloy systems to identify candidate braze compositions with the appropriate melting ranges. Material compositions, melting ranges, mechanical properties, oxidation resistance, and wetting characteristics of the candidate alloys were then analyzed experimentally. Substrate surface pre-treatments, active element additions, and novel brazing schemes were also investigated. Unfortunately, the current study failed to identify new silver-free braze compositions suitable for SOFC applications. To help measure the passivation characteristics of surface passivating braze oxide coatings, work was conducted to demonstrate, for the first time, that a variety of disparate and technologically-relevant thermal, mechanical, and electrochemical oxygen-exchange thin film material properties could all be obtained from in situ , current-collector-free wafer curvature measurements. Specifically, temperature or oxygen partial pressure induced changes in the curvature of 230 nm thick (100)-oriented Pr 0.1 Ce 0.9 O 1.95_x (10PCO) films atop 200 mm thick single crystal yttria stabilized zirconia or magnesium oxide substrates were used to measure the biaxial modulus, Young’s modulus, thermal expansion coefficient, thermochemical expansion coefficient, oxygen nonstoichiometry, chemical oxygen surface exchange coefficient, oxygen surface exchange resistance, thermal stress, chemical stress, thermal strain, and chemical strain of the model mixed ionic electronic conducting material 10PCO. The (100)-oriented thin film 10PCO thermal expansion coefficient, thermo-chemical expansion coefficient, oxygen nonstoichiometry, and Young’s modulus (which is essentially constant, at ~200 MPa, over the entire 280–700 °C temperature range in air) measured here were similar to those from other bulk and thin film 10PCO studies. In addition, the measured PCO10 oxygen surface coefficients were in agreement with those reported by other in situ , current collector- free techniques. However, the measured PCO10 oxygen surface exchange coefficients were significantly lower than those obtained from literature studies with large amounts of intentional or inadvertent precious metal surface coverage/contamination (suggesting that uncontaminated (100)-oriented 10PCO may not be a desirable SOFC cathode material). Taken together, this highlighted the advantages of using a sample’s mechanical response, instead of the more traditional electrical response, to probe the electrochemical properties of the ion-exchange materials used in solid oxide fuel cell, solid oxide electrolysis cell, gas-sensing, battery, emission control, water splitting, water purification, and other electrochemically-active devices. For the second approach, a novel silver-nickel brazing method was developed. It was demonstrated that transient porous nickel interlayers, instead of reactive element additions, could be used to promote Ag wetting on yttria stabilized zirconia (YSZ) and produce high-quality YSZ stainless steel (SS) braze joints. Mechanical tests on these reactive-element-free, silver-based SOFC braze joints, both before and after 500 hours of 750°C oxidation in air, showed that the braze and braze interface strength were higher than the underlying YSZ|NiO-YSZ substrate. The microstructural and compositional evolution of SS|Ag-Ni|YSZ braze joints exposed to dual atmosphere (air on one side and 4%H 2 -96%N 2 on the other side) for 300 hours of isothermal 750 °C aging and 300 25°C/min 35-830 °C rapid thermal cycles were compared to a Ag-3CuO braze joint. In contrast to conventional Ag-CuO RAB brazes, the Ag-Ni brazes remained pore free and well bonded, suggesting that Ag-Ni brazes may be more suitable for long term SOFC operation than Ag-CuO brazes. Other applications inspired by the silver-nickel wetting process on various ceramic substrates were also explored. In support of efforts to identify new CuO-free Ag-based brazes, density functional theory and ab initio molecular dynamics calculations were performed to 1) understand silver wetting on YSZ, and 2) identify new oxides to promote silver wetting on YSZ. These simulations found that while the formation of dissolved oxygen clusters within molten silver at the YSZ interface promoted wetting, much greater wetting angle reductions came from the formation of metal oxide interlayers at the Ag-YSZ interface. Through the development of a simple descriptor, many simple metal oxides (single cation) were examined. Unfortunately, their ability to promote Ag wetting were less than that of CuO. However, expanding the search to multi-cation oxides led to several promising candidates, such as CuAlO 2 , CuGaO 2 , and Cu 3 TiO 4 ; all of which are also stable in the reducing SOFC conditions. Depending upon their solubility in molten Ag, these newly-identified oxides could either be pre-applied as wetting promoting interlayers or directly incorporated into Ag to form new reactive air brazes.

36 MATERIALS SCIENCE↗

Developing Novel Electrode Materials for Aqueous Battery

Aqueous rechargeable batteries (ARBs) are particularly interesting for large-scale energy storage due to their inherent safety, superior rate capability and environmental friendliness. However, ARBs are not widely explored as yet, so we proposed designing, preparing, and testing new intercalation materials for ARBs. Development of these electrodes will enrich the electrode chemistry of existing ARBs, open up new avenues for high-performance electrode and system design, offer opportunities to improve energy efficiency of water purification, and inform future development of controls strategies and management systems for stationary aqueous energy storage. Researchers from Bosch and LBNL collaborated on relevant materials to pursue and the general design of experiments to implement. Bosch researchers prepared and fabricated the electrodes and used various characterization facilities at LBNL to evaluate electrode performance in-device. The research collaboration resulted in identifying electrode materials capable of Na + and Ca 2+ intercalation in aqueous systems, and their application for desalination was explored using testing platform available at LBNL. Besides the specific materials and their performance, the data collected during the study was also used to inform a broader techno-economic analysis to compare intercalation-desalination technique to commercially available capacitive desalination approach. Outcomes of this research effort will be published in peer-reviewed journals.

25 ENERGY STORAGE↗

Chemically Cross-Linked Cellulose Nanocrystal Aerogels for Effective Removal of Cation Dye

In this study, porous aerogels were prepared by directional freeze-drying via cross-linking cellulose nanocrystals (CNCs) with poly(methyl vinyl ether-co-maleic acid) (PMVEMA) and poly(ethylene glycol) (PEG). The thermal properties and physical adsorption performance toward cation methylene blue dye of the obtained CNC aerogels were investigated. The maximum degradation temperature was increased from 324&#x000B0;C of CNCs to 355&#x000B0;C of cross-linked CNC aerogels. The dye adsorption isotherm results showed that the maximum methylene blue adsorption capacity of CNC aerogels was 116.2 mg g &#x02212;1 , according to the Langmuir model, which was mainly due to the electrostatic attractions between negatively charged carboxyl groups or sulfonate groups on the CNC aerogles and cation MB molecules. The reusability test showed that the CNC aerogels contained the same dye adsorption performance in five adsorption/desorption cycles. Overall, this study described an ideal alternative for water purification with high dye adsorption capacity and enhanced physical performance.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Doubly-Charged Negative Ions as Novel Tunable Catalysts: Graphene and Fullerene Molecules Versus Atomic Metals

The fundamental mechanism underlying negative-ion catalysis involves bond-strength breaking in the transition state (TS). Doubly-charged atomic/molecular anions are proposed as novel dynamic tunable catalysts, as demonstrated in water oxidation into peroxide. Density Functional Theory TS calculations have found a tunable energy activation barrier reduction ranging from 0.030 eV to 2.070 eV, with Si 2– , Pu 2– , Pa 2– and Sn 2– being the best catalysts; the radioactive elements usher in new application opportunities. C 60 2– significantly reduces the standard C 60 – TS energy barrier, while graphene increases it, behaving like cationic systems. According to their reaction barrier reduction efficiency, variation across charge states and systems, rank-ordered catalysts reveal their tunable and wide applications, ranging from water purification to biocompatible antiviral and antibacterial sanitation systems.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗