Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “Level density”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 271 records · Page 15

Improved silicon carbide for advanced heat engines. II - Pressureless sintering and mechanical properties of injection molded silicon carbide

The influence on density and strength of pressureless sintering in vacuum and argon environments has been evaluated with injection molded SiC materials. Main effects and two factor interactions of sintering (cycle variables temperature, time, heating rate, and atmosphere) were assessed. An improved understanding of the influence of the processing flaws and sintering conditions has been obtained. Strength and density have improved from a baseline level of 299 MPa (43.3 Ksi) and 94 pct of theoretical density to values greater than 483 MPa (70 Ksi) and 97 pct.

Whalen, Thomas J.↗

Volcanic control of the Io atmosphere and neutral and plasma torus

Rate equations for the column density of Io's atmosphere and the number density of neutral atoms and ions in the torus have been formulated in terms of surface sublimation and venting of volcanic gases, sputtering efficiency, thermal escape, and the plasma processes that take place in the torus which included electron impact ionization, charge exchange, and transport. In the limit of low volcanic activity, estimates of the densities can be obtained, and the baseline configuration that would exist in the absence of volcanic activity is found. Solution of the coupled steady state rate equations shows that the densities are sensitive, to a varying degree, to the level of Io volcanism. The steady state densities predicted by the model are consistent with a volcanic flux of no more than 10 to the 12th/sq cm per sec. This is significantly lower than the values obtained on the basis of resurfacing rates and appears to imply that surface lava flows play a major role in the resurfacing process.

Eviatar, Aharon↗

Electron density distribution in the magnetosphere

Eight months of differential potential measurements from the POLAR satellite were used to study the electron density distribution in the magnetosphere and its dependence on the level of geomagnetic activity identified by the Kp index. The differential potential measurement is directly proportional to the electron density, and this technique can be used for detecting fast electron density variation in low-density plasmas with a good accuracy. The inner magnetospheric regions are particularly investigated in this study. The cusp is found to be denser during low Km, and it moves equator-ward with increasing Km. The plasmapause is quite asymmetric, as expected. In particular, on the nightside, the plasmapause is compressed closer to the earth with increasing Kp. While the density gradients at the dayside plasmapause are usually not very steep, they can be quite large at other time sectors. A particularly pronounced sharpening of the plasmapause occurs at the dusk sector with increasing Kp. The density in the region between the dayside plasmapause and magnetopause is relatively high during all Kp levels; the average densities are several electrons per cubic meter. During disturbed periods, the density in the near-earth plasma sheet near midnight increases and becomes higher than the densities towards the flanks of the plasma sheet.

Laakso, H.↗

Helium-cadmium laser parameters

He-Cd laser discharge, determining population densities and lifetimes for levels of Cd ion excited by He metastables

Hodges, D. T.↗

Jupiter's ionosphere - Prospects for Pioneer 10

Model Jovian ionospheres are constructed for comparison with Pioneer 10 results. Electron density maxima are predicted at a level approximately 220 kilometers above an assumed reference height where the hydrogen density is 10 to the 16-th power molecules per cubic centimeter. It may be possible to use observations of the electron density to locate the turbopause. Attention is drawn to a possible strong source of ionized sodium from Io which might lead to large electron densities at low altitudes.

Atreya, S. K.↗

Substorm-associated reconfiguration of the dusk side equatorial magnetosphere - A possible source mechanism for isolated plasma regions

A rapid reconfiguration of the dusk side magnetosphere was observed near the magnetic equator by particle and field experiments aboard Explorer 45 at 1715 UT on June 17, 1972. Following the onset of an 800-gamma negative bay in the auroral zone, Explorer 45, inbound at 1700 MLT and L about 5, observed a sharp dropout of outer zone electrons. Simultaneously, the plasma density dropped from a level typical of the plasmasphere to one typical of the ion trough, and plasma sheet proton fluxes increased, producing a 100-gamma depression in B, in a shift to a taillike configuration. Outer zone electrons with pitch angles near 45 deg returned with delay times consistent with injection near midnight at the time of dropout and eastward drift to the dusk meridian. Approximately 45 min after the reconfiguration, the satellite reentered the plasmasphere, and the electron fluxes returned to previous levels. In the next orbit, approximately 6 hours later, a region of isolated plasma was detected near apogee at 1400 MLT. There is therefore circumstantial evidence that the type of magnetospheric reconfiguration observed here is responsible for the detachment of regions of cold plasma from the plasmasphere.

Barfield, J. N.↗

Calculation of guaranteed mean power from wind turbine generators

A method for calculating the 'guaranteed mean' power output of a wind turbine generator is proposed. The term 'mean power' refers to the average power generated at specified wind speeds during short-term tests. Correlation of anemometers, the method of bins for analyzing non-steady data, the PROP Code for predicting turbine power, and statistical analysis of deviations in test data from theory are discussed. Guaranteed mean power density for the Clayton Mod-OA system was found to be 8 watts per square meter less than theoretical power density at all power levels, with a confidence level of 0.999. This amounts to 4 percent of rated power.

Spera, D. A.↗

Search for tachyons associated with extensive air showers in the ground level cosmic radiation

Events detected in a shielded plastic scintillation counter occurring in the 26 microsec preceding the arrival of an extensive air shower at ground level with local electron density or = 20 m to the -2 power and the 240 microsec after its arrival have been studied. No significant excess of events (tachyons) arriving in the early time domain have been observed in a sample of 11,585 air shower triggers.

Masjed, H. F.↗

O 7774 A diagnostic for quiescent prominences

Results are reported from photometric observations and statistical analyses of the O 7774 A (3/5/P yields 3/5/S) transition in quiescent solar prominences. The goal of the study was to derive accurate values for the ratio between the population density of the upper level of the observed transition relative to the total O population. The data were collected with the 25 cm coronagraph/3 m spectrograph at the Mees Solar Observatory. A strong temperature dependence was found for the transition, indicating that the O 7774 A/Na 5890 A ratio is of use for diagnostic studies of quiescent prominences. The possibility of applying the ratio as a diagnostic for spicules is discussed.

Brickhouse, Nancy S.↗

Memory implications of the spin-value effect in soft multilayers

New multilayer permalloy materials with thin separation layers that have significantly increased M-R coefficients at room temperature have the potential for substantially increasing both the speed and density of M-R memories. An analysis in the following discussion shows that the bit density at a given performance level is related to the product of M-R response and sheet resistivity when operating at the current-density limit. With a doubling of both sheet resistivity and M-R response over existing materials, the bit area can be reduced by about a factor of 4. Alternatively, if the bit area is kept the same, signal output is increased by a factor of 4 and circuit time constants can be reduced by a factor of 16.

Pohm, A. V.↗

Radio observations of peculiar emission-line Algol binary stars

Twelve peculiar emission-line Algol (PELA) binaries were observed at cm wavelengths. Six of these objects, WW And (tentative), KX And, AM Aur, V644 Mon, DN Ori, and AY Per were detected at the 100 to 400 micro-Jy level, corresponding to luminosity densities of order 10 exp 17 erg/s/Hz. These luminosity densities, combined with nearly flat cm spectra and high brightness temperatures, are consistent with the nonthermal gyrosynchrotron radiation model proposed as the result of observations from the previous PELA survey. Also, the star V367 Cyg was reobserved at thirteen different orbital phases; no variability was found within the errors. V367 Cyg's lack of variability and well-determined average spectral index, however, imply the possibility of a different emission mechanism, thermal bremsstrahlung, although the nonthermal model cannot be entirely ruled out. The characteristic brightness temperature of thermal bremsstrahlung is only about 10,000 K, which means that the radius of the emission region would have to be much larger than previously assumed, about 10 AU. Suggestions for further observations of all previously observed PELAS are presented in order to determine the correct emission mechanism.

Elias, Nicholas M., II↗

Calibration and Lag of a Friez Type Cup Anemometer

Tests on a Friez type cup anemometer have been made in the variable density wind tunnel of the Langley Memorial Aeronautical Laboratory to calibrate the instrument and to determine its suitability for velocity measurements of wind gusts. The instrument was calibrated against a Pitot-static tube placed directly above the anemometer at air densities corresponding to sea level, and to an altitude of approximately 6000 feet. Air-speed acceleration tests were made to determine the lag in the instrument reading. The calibration results indicate that there should be an altitude correction. It is concluded that the cup anemometer is too sluggish for velocity measurements of wind gusts.

INSTRUMENTS - ANEMOMETERS - FRIEZ↗

High amplitude waves in the expanding solar wind plasma

We simulated the 1-D nonlinear time-evolution of high-amplitude Alfven, slow and fast magnetoacoustic waves in the solar wind propagating outward at different angles to the mean magnetic (spiral) field, using the expanding box model. The simulation results for Alfven waves and fast magnetoacustic waves fit the observational constraints in the solar wind best, showing decreasing trends for energies and other rms-quantities due to expansion and the appearance of inward propagating waves as minor species in the wind. Inward propagating waves are generated by reflection of Alfven waves propagating at large angles to the magnetic field or they coincide with the occurrence of compressible fluctuations. In our simulations, fast and slow magnetoacoustic waves seem to have a level in the density-fluctuations which is too high when we compare with the observations. Furthermore, the evolution of energies for slow magnetoacoustic waves differs strongly from the evolution of fluctuation energies in situ.

Schmidt, J. M.↗

Applications of Power Spectral Analysis Methods to Maneuver Loads Obtained on Jet Fighter Airplanes During Service Operations

Power spectral densities of normal load factor have been obtained for two service operational training flights of a Republic F-84G airplane and three service operational training flights of a North American F-86A airplane in order to indicate the load-factor frequency content and possible uses of power spectral methods in analyzing maneuver load data. It was determined that the maneuvering load-factor time histories appeared to be described by a truncated normal distribution. The power spectral densities obtained were relatively level at frequencies below 0.03 cycle per second and varied inversely with approximately the cube of the frequency at the higher frequencies. In general, the frequency content was very low above 0.2 cycle per second. The load-factor peak distributions were estimated fairly well from the spectrum analysis. In addition, peak load data obtained during service operations of fighter-type airplanes with flight time totaling about 24,000 hours were examined and appeared to agree reasonably well with the type of equations obtained from spectrum peak-load distributions.

Mayer, John P.↗

Research Lasers and Air Traffic Safety: Issues, Concerns and Responsibilities of the Research Community

The subject of outdoor use of lasers relative to air traffic has become a diverse and dynamic topic. During the past several decades, the use of lasers in outdoor research activities have increased significantly. Increases in the outdoor use of lasers and increases in air traffic densities have changed the levels of risk involved. To date there have been no documented incidents of air traffic interference from research lasers; however, incidents involving display lasers have shown a marked increase. As a result of the national response to these incidents, new concerns over lasers have arisen. Through the efforts of the SAE G-10T Laser Safety Hazards Subcommittee and the ANSI Z136.6 development committee, potential detrimental effects to air traffic beyond the traditional eye damage concerns have been identified. An increased emphasis from the Federal Aviation Administration (FAA), the Center for Devices and Radiological Hazards (CDRH), and the National Transportation Safety Board (NTSB) along with increased concern by the public have resulted in focused scrutiny of potential hazards presented by lasers. The research community needs to rethink the traditional methods of risk evaluation and application of protective measures. The best current approach to assure adequate protection of air traffic is the application of viable hazard and risk analysis and the use of validated protective measures. Standards making efforts and regulatory development must be supported by the research community to assure that reasonable measures are developed. Without input, standards and regulations can be developed that are not compatible with the needs of the research community. Finally, support is needed for the continued development and validation of protective measures.

Nessler, Phillip J., Jr.↗

Correlations Between Topex Altimeter and Temperature Profile Data in the Equatorial Pacific

Observations of sea-surface heights from satellite altimeters have been a major contributor to monitoring the evolution of the recent major El Nino event. Assimilating altimeter data directly into numerical models only takes advantage of the surface signature provided by the data. However, that surface signature is usually indicative of processes occurring at depth, especially in the equatorial Pacific. In order for assimilation schemes to make maximum use of surface data, it is helpful to have knowledge of how to best extend that data in the vertical to account for that variability. Toward that end, the vertical correlation structure between satellite-observed sea-surface heights and in situ temperature measurements is examined using TOPEX altimeter and TOGA TAO profile data for the period 1993-1998. This time period includes several states of the tropical Pacific, including a perturbed state from 1993-1994, a quiescent state encompassing 1995-1996, and the major ENSO event of 1997-1998. Analyses for each of these periods, as well as the total period will be presented. In addition to analyses at specific depth levels, analyses for particular density surfaces will also be presented.

Adamec, David↗