Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “ENERGY LOSSES”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 271 records · Page 15

Response of polymer composites to high and low velocity impact

The present investigation of fiber-reinforced polymer matrix composites' impact characteristics employed a drop tower for the low-velocity impact case and a novel, projectile instantaneous velocity-measuring sensor for high-velocity impact. Attention was given to the energy loss of projectiles in composites reinforced with polyethylene, kevlar, and graphite. Two distinct energy-loss mechanisms are noted, the first of which is due to the actual fracture process while the other is due to the generation of friction heat. The drop-tower impact-test results furnish the strain-rate dependence of the energy loss.

Hsieh, C. Y.↗

Electron impact excitation of coronene

A preliminary study of the electron-impact excitation of thermally evaporated coronene at 550 C was carried out using electron-energy-loss spectroscopy. Measurements of the energy-loss spectra of coronene at high (100 eV) and low (5-20 eV) impact energies are presented. One of the high-energy spectra was converted to an apparent generalized oscillator strength spectrum and compared to the photoabsorption spectrum of coronene. Observations concerning vibrational excitation of coronene by electron impact are also presented and discussed.

Khakoo, M. A.↗

Direct Quantification of Heat Generation Due to Inelastic Scattering of Electrons Using a Nanocalorimeter

Transmission electron microscopy (TEM) is arguably the most important tool for atomic-scale material characterization. A significant portion of the energy of transmitted electrons is transferred to the material under study through inelastic scattering, causing inadvertent damage via ionization, radiolysis, and heating. In particular, heat generation complicates TEM observations as the local temperature can affect material properties. Here, the heat generation due to electron irradiation is quantified using both top-down and bottom-up approaches: direct temperature measurements using nanowatt calorimeters as well as the quantification of energy loss due to inelastic scattering events using electron energy loss spectroscopy. Combining both techniques, a microscopic model is developed for beam-induced heating and to identify the primary electron-to-heat conversion mechanism to be associated with valence electrons. Building on these results, the model provides guidelines to estimate temperature rise for general materials with reasonable accuracy. This study extends the ability to quantify thermal impact on materials down to the atomic scale.

42 ENGINEERING↗

Galactic cosmic ray modulation from 1965-1970.

Numerical solutions of the cosmic-ray equation of transport within the solar cavity and including the effects of diffusion, convection, and energy losses due to adiabatic deceleration, have been used to reproduce the modulation of galactic electrons, protons, and helium nuclei observed during the period from 1965 to 1970. Kinetic energies between 10 and 10,000 MeV/nucleon are considered. Computed and observed spectra are given for the years 1965, 1968, 1969, and 1970 together with the diffusion coefficients. These diffusion coefficients are assumed to be of separable form in rigidity and radial dependence, and are consistent with the available magnetic-field power spectra. The force-field solutions are given for these diffusion coefficients and galactic spectra and are compared with the numerical solutions. It is shown that the energy losses and convection lead to near-earth nuclei spectra at kinetic energies less than or equal to 100 MeV/nucleon in which the differential intensity is proportional to the kinetic energy with little dependence on the form of the galactic spectrum. This dependence is in agreement with the observed spectra of all species of atomic nuclei and it is argued that this provides strong observational evidence for the presence of energy losses in the propagation process, and for the exclusion of low-energy galactic nuclei from near earth.

Urch, I. H.↗

Theory of inelastic ion-atom scattering at low and intermediate energies

Ab initio calculations are presented of inelastic energy loss and ionization phenomena associated with Ar(+)-Ar collisions at small distances of closest approach and for laboratory collision energies ranging from several keV to several hundred keV. Outer-shell excitations are handled statistically; inner-shell excitations are calculated from the viewpoint of quasidiabatic molecular orbital promotion. Auger electron yield, average state of ionization, and average inelastic energy loss are calculated per collision as a function of distance of closest approach of the collision partners for several laboratory collision energies. Average charge-state probabilities per collision partner are calculated as a function of the average inelastic energy loss per atom. It is shown that the structure in the data is due to the underlying structure in the inner-shell independent-electron quasimolecular promotion probabilities.

Schmid, G. B.↗

Revealing local order via high energy EELS

Short range order (SRO) is critical in determining the performance of many important engineering materials. However, accurate characterization of SRO with high spatial resolution – which is needed for the study of individual nanoparticles and at material defects and interfaces – is often experimentally inaccessible. Here, we locally quantify SRO via scanning transmission electron microscopy with extended energy loss fine structure analysis. Specifically, we use novel instrumentation to perform electron energy loss spectroscopy out to 12 keV, accessing energies which are conventionally only possible using a synchrotron. Our data is of sufficient energy resolution and signal-to-noise ratio to perform quantitative extended fine structure analysis, which allows determination of local coordination environments. To showcase this technique, we investigate a multicomponent metallic glass nanolaminate and locally quantify the SRO with <10 nm spatial resolution; this measurement would have been impossible with conventional synchrotron or electron microscopy methods. Finally, we discuss the nature of SRO within the metallic glass phase, as well as the wider applicability of our approach for determining processing–SRO–property relationships in complex materials.

36 MATERIALS SCIENCE↗

Electron scattering by highly polar molecules. II - LiF

The crossed electron-beam - molecular-beam scattering technique has been used to measure relative values of differential 'elastic' scattering cross sections at electron impact energies of 5.4 and 20 eV for the angular range from 20 to 130 deg. The absolute values of these cross sections have been obtained by normalization to the classical perturbation theory of Dickinson (1977) at a scattering angle of 40 deg. These differential cross sections have then been used to calculate the integral and momentum-transfer cross sections. An energy-loss spectrum at 100 eV electron impact energy and 15 deg scattering angle has also been obtained. Two weak features at the energy losses of 6.74 and 8.82 eV appear. Their energy positions are compared with the recent calculations of Kahn et al. (1974).

Vuskovic, L.↗

I-mode pedestal relaxation events in the Alcator C-Mod and ASDEX Upgrade tokamaks

Abstract In some conditions, I-mode plasmas can feature pedestal relaxation events (PREs) that transiently enhance the energy reaching the divertor target plates. To shed light on their appearance, characteristics and energy reaching the divertor targets, a comparative study between two tokamaks — Alcator C-Mod and ASDEX Upgrade — is carried out. It is found that PREs appear only in a subset of I-mode discharges, mainly when the plasma is close to the H-mode transition. Also, a growing oscillating precursor before the PRE onset is observed in the region close to the separatrix in both devices, and a discussion on a possible triggering mechanism is outlined. The PRE relative energy loss from the confined region is found to increase with decreasing pedestal top collisionality ν ped * . Similarly, also the relative electron temperature drop at the pedestal top, which is related to the conductive energy loss, rises with decreasing ν ped * . Based on these relations, the PRE relative energy loss in future devices such as DEMO and ARC is estimated. Finally, the divertor peak energy fluence due to the PRE is measured on each device. Those values are then compared to the model introduced in Eich et al (2017 Nucl. Mater. Energy 12 84–90) for type-I edge localized modes. The model is shown to provide an upper boundary for PRE energy fluence data, while a lower boundary is found by dividing the model by three. These two boundaries are used to make projections of the PRE divertor energy fluence to DEMO and ARC.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Sensitivity study with a $\textit{D}$ and $\textit{B}$ mesons modular simulation code of heavy flavor $R_{AA}$ and azimuthal anisotropies based on beam energy, initial conditions, hadronization, and suppression mechanisms

Heavy flavor probes provide important information about the in-medium properties of the quark-gluon plasma produced in heavy-ion collisions. In this work, we investigate the effects of 2D + 1 event-by-event fluctuating hydrodynamic backgrounds on the nuclear suppression factor and momentum anisotropies of heavy flavor mesons and nonphotonic electrons. Using the state-of-the-art $\textit{D}$ and $\textit{B}$ mesons modular simulation code (called “DAB-MOD”), we perform a systematic comparison of different transport equations in the same background, including a few energy-loss models—with and without energy-loss fluctuations—and a relativistic Langevin model with different drag parametrizations. We present the resulting $\textit{D}$ and $\textit{B}$ mesons $R_{A A}, v_2, v_3,$ and $v_4$ as well as multiparticle cumulants, in AuAu collisions at $\sqrt{s_{NN}}$ = 200 GeV and PbPb collisions at $\sqrt{s_{NN}}$ = 2.76 TeV and $\sqrt{s_{NN}}$ = 5.02 TeV , and compare them to the available experimental data. The $v_2${4}/$v_2${2} ratio, which is known to be a powerful probe of the initial conditions and flow fluctuations in the soft sector, is also studied in the context of heavy flavor. We also investigate the correlations between the transverse anisotropies of heavy mesons and all charged particles to better understand how heavy quarks couple to the hydrodynamically expanding quark-gluon plasma. Finally, we study the influence that different initial conditions and the implementation of heavy-light quark coalescence has on our results.

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗

Electron Excitation Cross Sections for the C II Transitions 2s(exp 2)2p P-2(exp 0) yields 2s2p(exp 2) P-4, D-2, and S-2

Experimental and theoretical excitation cross sections are reported for the transitions 2s(exp 2) 2p-2(exp 0) yield 2s2p(exp 2)P-4, D-2, and S-2 in C II. The transition wavelengths (energies) are 2324 A (5.34 eV), 1335 x (9.29 eV), and 1036 A (11.97 eV), respectively. Use is made of electron energy-loss and merged beams methods. The energy range covered is from below each threshold (4 - 11 eV) to 15-24 eV. As in previous work with O II, care was taken to assess and minimize the metastable fraction in the C II beam, to account for contributions from nearby energy-loss features, and to collect the full angular range of inelastically scattered electrons. A comparison is made for each transition between experiment and new 8-state R-matrix calculations. Subject headings: atomic data ultraviolet: general

Smith, Steven J.↗

Electron Excitation Cross Sections for the C // Transitions 2s(sup 2)wp (sup 2)Pdegree -- 2s2p(sup 2) (sup 4)P, (sup 2)D and (sup 2)S

Experimental and theoretical excitation cross sections are reported for the transitions 2s22p 2Po 2s2p2 4P, 2D and 2S in C //. The transition wavelengths (energies) are l 2324 A (5.34 eV), l 1335 A (9.29 eV), and l 1036 A (11.96 eV), respectively. Use is made of electron energy-loss and merged- beams methods. The energy range covered is from below each threshold (4-11 eV) to 22-25 eV. As in previous work with O //, care was taken to assess and minimize the metastable fraction in the C //beam, to account for contributions from nearby energy-loss features, and to collect the full angular range of inelastically-scattered electrons. Comparison is made for each transition between experiment and a new 8-state R-matrix calculations.

Electron Excitation↗

Study of Atmospheric Nitric Oxide

We investigated the contribution of energetic nitrogen atoms to the production of nitric oxide in the thermosphere and their influence on the infrared emission spectrum. The nitric oxide molecules are important contributors to the cooling of the atmosphere. We first pointed out that in determining the energy distribution of the nitrogen atoms, it is important to take into account the thermal motion of the atmospheric gases. It had been ignored in all earlier studies. The source spectra are broadened considerably by the center of mass motion of the reactants. We worked out the consequences for the production of nitric oxide at night, using as sources of energetic N atoms, NO(+) + e yield N + O, N(D-2) + O yield N + O. The high energy tail is enhanced by orders of magnitude. We had earlier suggested (Sharma et al. 1993) that the reaction of energetic nitrogen atoms with O2 was responsible for the rotationally enhanced NO identified in the infrared spectrum. Our calculations provided quantitative confirmation of the suggestion. We proceeded to explore the validity of another approximation used in earlier analyses, the hard sphere approximation for the energy loss in elastic collisions. We carried out precise quantum mechanical calculations of the elastic 2 differential scattering of nitrogen atoms in collisions with oxygen atoms and showed that although the hard sphere approximation was nowhere of high precision, reasonable results could be obtained with an effective cross section of 6 x 10(exp 15)sq cm. We also initiated a program to include inelastic energy loss processes in the determination of the energy distribution function. We began a calculation of the rotation and vibrational excitation cross sections of molecular nitrogen and nitrogen atoms and developed a method for including inelastic energy loss as a function of scattering angle in the Boltzmann equation. A procedure for obtaining the solution of the Boltzman equation was worked out.

Dalgarno, A.↗

An overview of wind-energy-production prediction bias, losses, and uncertainties

Abstract. The financing of a wind farm directly relates to the preconstruction energy yield assessments which estimate the annual energy production for the farm. The accuracy and the precision of the preconstruction energy estimates can dictate the profitability of the wind project. Historically, the wind industry tended to overpredict the annual energy production of wind farms. Experts have been dedicated to eliminating such prediction errors in the past decade, and recently the reported average energy prediction bias is declining. Herein, we present a literature review of the energy yield assessment errors across the global wind energy industry. We identify a long-term trend of reduction in the overprediction bias, whereas the uncertainty associated with the prediction error is prominent. We also summarize the recent advancements of the wind resource assessment process that justify the bias reduction, including improvements in modeling and measurement techniques. Additionally, because the energy losses and uncertainties substantially influence the prediction error, we document and examine the estimated and observed loss and uncertainty values from the literature, according to the proposed framework in the International Electrotechnical Commission 61400-15 wind resource assessment standard. From our findings, we highlight opportunities for the industry to move forward, such as the validation and reduction of prediction uncertainty and the prevention of energy losses caused by wake effect and environmental events. Overall, this study provides a summary of how the wind energy industry has been quantifying and reducing prediction errors, energy losses, and production uncertainties. Finally, for this work to be as reproducible as possible, we include all of the data used in the analysis in appendices to the article.

17 WIND ENERGY↗

Unraveling radiation damage and healing mechanisms in halide perovskites using energy-tuned dual irradiation dosing

Perovskite photovoltaics have been shown to recover, or heal, after radiation damage. Here, we deconvolve the effects of radiation based on different energy loss mechanisms from incident protons which induce defects or can promote efficiency recovery. We design a dual dose experiment first exposing devices to low-energy protons efficient in creating atomic displacements. Devices are then irradiated with high-energy protons that interact differently. Correlated with modeling, high-energy protons (with increased ionizing energy loss component) effectively anneal the initial radiation damage, and recover the device efficiency, thus directly detailing the different interactions of irradiation. We relate these differences to the energy loss (ionization or non-ionization) using simulation. Dual dose experiments provide insight into understanding the radiation response of perovskite solar cells and highlight that radiation-matter interactions in soft lattice materials are distinct from conventional semiconductors. These results present electronic ionization as a unique handle to remedying defects and trap states in perovskites.

14 SOLAR ENERGY↗

A generalized vortex theory of the screw propeller and its application

The vortex theory as presented by the author in earlier papers has been extended to permit the solution of the following problems: (1) the investigation of the relation between thrusts and torque distribution and energy loss as given by the induction of helical vortex sheets and by the parasite drag; (2) the checking of the theorem of Betz of the rigidly behaving helical vortex sheet of minimum induced energy loss; (3) the extension of the theory of the screw propeller of minimum energy loss for the inclusion of parasite-drag distribution along the blades. A simple system of diagrams has been developed to systematize the design of airplane propellers for a wide range of parasite-drag distribution along the blades.

Reissner, Hans↗

Observation of Suppressed Charged-Particle Production in Ultrarelativistic Oxygen-Oxygen Collisions

A hot and dense state of nuclear matter, known as the quark-gluon plasma, is created in collisions of ultrarelativistic heavy nuclei. Highly energetic quarks and gluons, collectively referred to as partons, lose energy as they travel through this matter, leading to suppressed production of particles with large transverse momenta (𝑝 T ). Conversely, high-𝑝 T particle suppression has not been seen in proton-lead collisions, raising questions regarding the minimum system size required to observe parton energy loss. Oxygen-oxygen (OO) collisions examine a region of effective system size that lies between these two extreme cases. The CMS detector at the CERN LHC has been used to quantify charged-particle production in inclusive OO collisions for the first time via measurements of the nuclear modification factor (𝑅 AA ). The 𝑅 AA is derived by comparing particle production to expectations based on proton-proton (𝑝⁢𝑝) data and has a value of unity in the absence of nuclear effects. The data for OO and 𝑝⁢𝑝 collisions at a nucleon-nucleon center-of-mass energy $\sqrt{s_{NN}}$ = 5.36 TeV correspond to integrated luminosities of 6.1 nb −1 and 1.02 pb −1 , respectively. The 𝑅 AA is below unity with a minimum of 0.69 ± 0.04 around 𝑝 T = 6 GeV. The data exhibit better agreement with theoretical models incorporating parton energy loss as compared to baseline models without energy loss.

FOS: Physical sciences↗

New PHENIX Results on Mid-Rapidity Bottom and Charm Production in Au+Au collisions at $\sqrt{s_{NN}}$= 200 GeV

Energy loss of quarks in the hot and dense medium has been studied for decades. Both the experimental and theoretical efforts have hinted that the energy loss is quark mass dependent. Although experiments at the Relativistic Heavy Ion Collider (RHIC) and the Large Hadron Collider (LHC) have found that the electrons from heavy quarks are less or similarly suppressed compared to the light hadrons, the mass ordering of the suppression between charm and bottom quarks is not yet clear due to large experimental uncertainties. We have fully exploited the events recorded at mid-rapidity in Au+Au collisions at center-of-mass energy of 200 GeV by the PHENIX experiment at RHIC to study the invariant yield of electrons from open heavy flavors. Latest results on the nuclear modification factors for charm and bottom separated heavy flavor electrons are reviewed in this proceeding. The implications of these results on the understanding of the quark mass and medium size dependence of the energy loss are also discussed.

74 ATOMIC AND MOLECULAR PHYSICS↗