Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “Designs that Work”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 271 records · Page 15
All sourcesNASA NTRSDOE OSTI
NASA NTRS1978

User interface concerns

Three possible goals for the Numerical Aerodynamic Simulation Facility (NASF) are: (1) a computational fluid dynamics (as opposed to aerodynamics) algorithm development tool; (2) a specialized research laboratory facility for nearly intractable aerodynamics problems that industry encounters; and (3) a facility for industry to use in its normal aerodynamics design work that requires high computing rates. The central system issue for industry use of such a computer is the quality of the user interface as implemented in some kind of a front end to the vector processor.

Redhed, D. D.↗
NASA NTRS1979

Development and evaluation of die and container materials

X = 0.75 Beta prime Sialon (a silicon aluminum oxynitride) and Sibeon (silicon beryllium oxynitride) are promising die materials. In sessile drop tests in contact with molten silicon, beryllium contamination was less than ppm and aluminum contamination 50 ppm. A shaping die of the Sialon material was successfully fabricated. Dry milling studies for the preparation of Si3N4-Al2O3-ALN mixtures were performed with butanol, acetic anhydride, oleic acid, and triethanolamine milling aids. Optimum mixing was achieved with 0.15 percent triethanolamine using a milling time of 8 hours. Preliminary evaluation of Sibeon materials indicates that they are more resistent to molten silicon attack than Sialon. Silicon contamination from the beryllium was less than aluminum contamination even though the aluminum impurity level in the Sibeon was only 450 to 1300 ppm. Work designed to produce an aluminum-free Sibeon is described.

Wills, R. R.↗
NASA NTRS1980

Study of methane fuel for subsonic transport aircraft

The cost and performance were defined for commercial transport using liquid methane including its fuel system and the ground facility complex required for the processing and storage of methane. A cost and performance comparison was made with Jet A and hydrogen powered aircraft of the same payload and range capability. Extensive design work was done on cryogenic fuel tanks, insulation systems as well as the fuel system itself. Three candidate fuel tank locations were evaluated, i.e., fuselage tanks, wing tanks or external pylon tanks.

Carson, L. K.↗
NASA NTRS1979

Discrete model reference adaptive systems with measurement noise

A digital computer simulation study is presented for a class of discrete model reference adaptive systems designed using Liapunov's direct method. Plant output measurements are assumed to contain uniformly distributed additive noise. It is shown that the design works well even when such noise is relatively extreme. A new result is presented pertaining to improving the convergence properties of these systems. This result is obtained by modifying the dynamic characteristics of the augmented error equation.

Monopoli, R. V.↗
NASA NTRS1981

An observer for a deployable antenna

An observer is derived for use on an Orbiter-Deployable Antenna configuration. The unique feature of this observer design for this flight experiment is that all the plant inputs are not required to be directly accessible for the observer to ferret out the system states. The observer uses state and rate of the state information to reconstruct the plant states. Results are presented which show how effectively this observer design works for this large space structure flight experiment.

Waites, H. B.↗
NASA NTRS1980

Development of advanced Czochralski growth process to produce low cost 150 kg silicon ingots from a single crucible for technology readiness

The design and development of an advanced Czochralski crystal grower are described. Several exhaust gas analysis system equipment specifications studied are discussed. Process control requirements were defined and design work began on the melt temperature, melt level, and continuous diameter control. Sensor development included assembly and testing of a bench prototype of a diameter scanner system.

Source record↗
NASA NTRS1982

Turbulent flow simulation - A large eddy simulator's viewpoint

The state of the art of the data base on turbulent structures and numerical turbulence modelling is assessed. The failure of statistical methods to produce accurate results revealed that turbulence is more than simply random noise. Both randomness and coherence may be characteristics of turbulence, which may also feature noise that is a remnant of previous coherence. Five methods are presently used for numerically predicting turbulent flow behavior: correlations, integral methods, the k-epsilon model, and phenomenological and exact solutions to the Navier-Stokes equations. The higher level models include large eddy simulation and full simulation with numerical solutions to the Navier-Stokes equations; the two methods are applicable to experimental, rather than design work.

Ferziger, J. H.↗
NASA NTRS1985

Simulation of Aircraft Behaviour on and Close to the Ground

A guide to the current state of the technology of simulating fixed-wing aircraft handling qualities and performance on or close to the ground is presented and pitfalls which may prevent an adequate implementation are indicated. The scope of possible applications in both aircraft design work and pilot training is considered and the requirements for mathematical model definitions and implementations are discussed. The current requirements for visual and motion systems, cockpit cueing, and software modelling are also reviewed, and illustrated with specific examples in areas of aircraft research and development studies and pilot training uses. Needs for further improvements and additional data acquisition are identified.

Barnes, A. G.↗
NASA NTRS1984

On the attitude motion of a self-excited rigid body

Leimanis (1965) has published a monograph, which contains Boedewadt's solution of Euler's equations of motion for a symmetric rigid body subject to a time-independent, self-excitement in a body-fixed direction. In addition, the monograph provided also Boedewadt's solution for the corresponding angles of rotation. It is pointed out that the solution of Euler's equations of motion provides a poor approximation to the problem of nearly symmetric rigid bodies in cases in which a high degree of accuracy (less than 1 percent error) is required. A much more accurate approximate solution has been provided by Longuski (1980). The result given by Leimanis in the case of the Eulerian angles is incorrect for arbitrary constant torques. The approximate solution given by Longuski, however, is extremely accurate and suitable for computer design work and error analysis of spacecraft performance. The present investigation is concerned with a review of the solutions and the specific regions of validity of the solution for the Eulerian angles.

Longuski, J. M.↗
NASA NTRS1985

Propulsion evaluation for orbit-on-demand vehicles

Future earth-to-orbit vehicles may be required to reach orbit within hours or even minutes of a decision. A study has been conducted to consider vehicles with such a capability. In Phase I of the study, 11 vehicles were designed to deploy 5000 lb to a polar orbit. Changes in the designs were examined parametrically for increased on-orbit maneuvers, increased payload, and other mission variations. Based on the results, two concepts were selected for Phase II design work: a vertical-takeoff, two-stage system and a horizontal-takeoff, two-stage system with an airbreathing subsonic first stage. The results of several propulsion evaluations are presented, including liftoff thrust-to-weight effects, dual-fuel propulsion for a horizontal-takeoff concept, and the effect of using fluorine.

Martin, J. A.↗
NASA NTRS1986

Wind tunnel technology for the development of future commercial aircraft

Requirements for new technologies in the area of civil aircraft design are mainly related to the high cost involved in the purchase of modern, fuel saving aircraft. A second important factor is the long term rise in the price of fuel. The demonstration of the benefits of new technologies, as far as these are related to aerodynamics, will,for the foreseeable future, still be based on wind tunnel measurements. Theoretical computation methods are very successfully used in design work, wing optimization, and an estimation of the Reynolds number effect. However, wind tunnel tests are still needed to verify the feasibility of the considered concepts. Along with other costs, the cost for the wind tunnel tests needed for the development of an aircraft is steadily increasing. The present investigation is concerned with the effect of numerical aerodynamics and civil aircraft technology on the development of wind tunnels. Attention is given to the requirements for the wind tunnel, investigative methods, measurement technology, models, and the relation between wind tunnel experiments and theoretical methods.

Szodruch, J.↗
NASA NTRS1986

Space station science lab module

The Science Lab Module (SLM), a key component of the proposed Space Station (SS) orbiting complex, is undergoing intensive study during the project design phase which is currently underway. The SLM is one of the two laboratory modules which, together with two habitation modules, comprise the core elements of the SS reference configurations. Current project emphasis is to configure the SLM as a national science laboratory module facility which would have four major functions: maximize life sciences research potential, support operations of attached payloads, provide shirtsleeve environment for other payload instrument servicing, and support other science requirements. The design studies are focusing on outfitting a common module basic design to accommodate the four specific functions. Although design work for outfitting the SLM for life sciences research is underway, science requirements for the other sciences and functions are not as well developed.

Devincenzi, D. L.↗
NASA NTRS1987

Microburst model requirements for flight simulation: An airframe manufacturer's perspective

A brief outline is given of topics for presentation and discussion at the workshop. As manufacturers and certifiers of transport airplanes and associated on-board systems, an interest in the prevention of wind shear related accidents and incidents is inherent. The near term objectives are to provide the customers technical support in the areas of training as well as to research existing and potentially improved on-board systems. In the future, many improved systems should be implemented. This will require certification as well as further educational activity in the use of these new systems. A set of wind models is needed for design work which characterize a wide variety of real microbursts as measured during the JAWS project. The wind models should be limited in both size and complexity to just those features which degrade aircraft performance.

Schoenman, Richard L.↗
NASA NTRS1985

Automotive Stirling Engine Development Program

Development test activities on Mod I engines directed toward evaluating technologies for potential inclusion in the Mod II engine are summarized. Activities covered include: test of a 12-tube combustion gas recirculation combustor; manufacture and flow-distribution test of a two-manifold annular heater head; piston rod/piston base joint; single-solid piston rings; and a digital air/fuel concept. Also summarized are results of a formal assessment of candidate technologies for the Mod II engine, and preliminary design work for the Mod II. The overall program philosophy weight is outlined, and data and test results are presented.

Nightingale, N.↗
NASA NTRS1987

Arcjet thruster research and technology, phase 1

The objectives of Phase 1 were to evaluate analytically and experimentally the operation, performance, and lifetime of arcjet thrusters operating between 0.5 and 3.0 kW with catalytically decomposed hydrazine (N2H4) and to begin development of the requisite power control unit (PCU) technology. Fundamental analyses were performed of the arcjet nozzle, the gas kinetic reaction effects, the thermal environment, and the arc stabilizing vortex. The VNAP2 flow code was used to analyze arcjet nozzle performance with non-uniform entrance profiles. Viscous losses become dominant beyond expansion ratios of 50:1 because of the low Reynolds numbers. A survey of vortex phenomena and analysis techniques identified viscous dissipation and vortex breakdown as two flow instabilities that could affect arcjet operation. The gas kinetics code CREK1D was used to study the gas kinetics of high temperature N2H4 decomposition products. The arc/gas energy transfer is a non-equilibrium process because of the reaction rate constants and the short gas residence times. A thermal analysis code was used to guide design work and to provide a means to back out power losses at the anode fall based on test thermocouple data. The low flow rate and large thermal masses made optimization of a regenerative heating scheme unnecessary.

Knowles, Steven C.↗
NASA NTRS1987

Power meter for optical efficiency measurements of laser-induced plasmas

A power meter was constructed to measure the power being deposited in transient laser-induced plasmas (LIP). The design rejects the radiation scattered from the laser beam by the LIP and that transmitted past the LIP. The power meter is constructed from a small metal-capped flask placed in an evacuated chamber. The steady-state heat production in the flask is determined from measurements of the temperature gradient on a thermal resistance connecting the top of the flask with a heat sink. The design worked well and should be applicable to a wide variety of situations if the dimensions of the system are adjusted to compensate for power levels substantially different from those used here.

Borucki, William J.↗
NASA NTRS1989

Advanced high-temperature batteries

The promise of very high specific energy and power was not yet achieved for practical battery systems. Some recent approaches are discussed for new approaches to achieving high performance for lithium/DeS2 cells and sodium/metal chloride cells. The main problems for the development of successful LiAl/FeS2 cells were the instability of the FeS2 electrode, which has resulted in rapidly declining capacity, the lack of an internal mechanism for accommodating overcharge of a cell, thus requiring the use of external charge control on each individual cell, and the lack of a suitable current collector for the positive electrode other than expensive molybdenum sheet material. Much progress was made in solving the first two problems. Reduction of the operating temperatures to 400 C by a change in electrolyte composition has increased the expected life to 1000 cycles. Also, a lithium shuttle mechanism was demonstrated for selected electrode compositions that permits sufficient overcharge tolerance to adjust for the normally expected cell-to-cell deviation in coulombic efficiency. Sodium/sulfur batteries and sodium/metal chloride batteries have demonstrated good reliability and long cycle life. For applications where very high power is desired, new electrolyte coinfigurations would be required. Design work was carried out for the sodium/metal chloride battery that demonstrates the feasibility of achieving high specific energy and high power for large battery cells having thin-walled high-surface area electrolytes.

Nelson, Paul A.↗
NASA NTRS1990

Preliminary design of a supersonic Short Takeoff and Vertical Landing (STOVL) fighter aircraft

The preliminary design study of a supersonic Short Takeoff and Vertical Landing (STOVL) fighter is presented. A brief historical survey of powered lift vehicles was presented, followed by a technology assessment of the latest supersonic STOVL engine cycles under consideration by industry and government in the U.S. and UK. A survey of operational fighter/attack aircraft and the modern battlefield scenario were completed to develop, respectively, the performance requirements and mission profiles for the study. Three configurations were initially investigated with the following engine cycles: a hybrid fan vectored thrust cycle, a lift+lift/cruise cycle, and a mixed flow vectored thrust cycle. The lift+lift/cruise aircraft configuration was selected for detailed design work which consisted of: (1) a material selection and structural layout, including engine removal considerations, (2) an aircraft systems layout, (3) a weapons integration model showing the internal weapons bay mechanism, (4) inlet and nozzle integration, (5) an aircraft suckdown prediction, (6) an aircraft stability and control analysis, including a takeoff, hover, and transition control analysis, (7) a performance and mission capability study, and (8) a life cycle cost analysis. A supersonic fighter aircraft with STOVL capability with the lift+lift/cruise engine cycle seems a viable option for the next generation fighter.

Cox, Brian↗