Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “rectifiers”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 235 records · Page 13
All sourcesNASA NTRSDOE OSTI
NASA NTRS1977

High resolution atlas of the solar spectrum 2678-2931 A

A portion of the ultraviolet solar spectrum is presented in this high resolution atlas. The data, originating from a rocket echelle spectrogram obtained on 19 June 1974 of a quiet area near the center of the solar disk, extend from 2678 to 2931 A. The instrument had a nominal resolving power of 200,000 at these wavelengths and the rms precision of the rectified wavelength scale is 15 mA. Absolute intensities are computed by calibration to the absolute measurements of Kohl and Parkinson.

Allen, M. S.↗
NASA NTRS1977

Computer-aided reliability estimation

Computer-aided reliability estimation (CARE) programs are developed to improve the tools available for estimating the reliability of fault-tolerant systems. A description is presented of a program, called CARE II, which was developed after the first program reported by Mathur (1971). Attention is given to the CARE II reliability model, the CARE II coverage model, and CARE II limitations which are to be rectified in CARE III. It is pointed out that the present coverage model in CARE II is extremely versatile. The major limitation is related to the burden placed on the user to determine the basic parameters from which the coverage calculations are made.

Stiffler, J. J.↗
NASA NTRS1977

MIS diode structure in As/+/ implanted CdS

Structure made by As implantation of carefully prepared high-conductivity CdS surfaces followed by Pt deposition and 450 C anneal display rectifying, although substantially different, I-V characteristics in the dark and during illumination with subband-gap light. Structures prepared in the same way on an unimplanted portion of the substrate have similar I-V characteristics, except that the forward turnover voltage for an illuminated unimplanted diode is much smaller than that for an implanted diode. It is suggested that the charge conduction in both structures is dominated by hole and/or electron tunneling through a metal-semiconductor potential barrier. The tunneling processes appear to be quite sensitive to subband-gap illumination, which causes the dramatic decreases of turnover voltages and apparent series resistances. The difference in turnover voltage appears to be caused by interface states between the Pt electrode and the implanted layer, which suggests a MIS model.

Hutchby, J. A.↗
NASA NTRS1977

Computer image processing - The Viking experience

Computer processing of digital imagery from the Viking mission to Mars is discussed, with attention given to subjective enhancement and quantitative processing. Contrast stretching and high-pass filtering techniques of subjective enhancement are described; algorithms developed to determine optimal stretch and filtering parameters are also mentioned. In addition, geometric transformations to rectify the distortion of shapes in the field of view and to alter the apparent viewpoint of the image are considered. Perhaps the most difficult problem in quantitative processing of Viking imagery was the production of accurate color representations of Orbiter and Lander camera images.

Green, W. B.↗
NASA NTRS1980

Minimizing spikes in switching-regulator circuits

Circuit, employing tapped inductor to back-bias rectifying diodes and extra diode to cummutate current, minimizes current spikes that cause premature transistor failure in switching-regulator circuits.

Mclyman, W. T.↗
NASA NTRS1980

Zone-controlled resistance heater

Geodesic array of heaters powered by separate electrical supply unit and silicon controlled-rectifier (SCR) control unit produces controlled temperatures over independent zones. Arrays conform to and enclose almost any shape with close thermal coupling and are programmed to reproduce almost any desired time/temperature distribution.

Bagwell, P. R.↗
NASA NTRS1980

JANTX/N1202A switching diode

General Electric and International Rectifier switching diodes were tested. Group 2 testing proved to be most damaging to both lots. In group 2 testing many visual failures were seen in samples from both manufacturers.

Source record↗
NASA NTRS1980

Onsite testing of pressure sampling

Portable test instrument containing controller, pressure port identification, 5-V power source for transducer excitation, and digital voltmeter to test pressure sampling valves completely, including leak and plug check before, during, or after installation in any location or environment. Controller comprises 117/24-Vac 100-watt transformer, bridge rectifier, capacitive-discharge stepper, and constant voltage source for homing sampling valve. It also includes 5-V regulated power supply and bipolar digital voltmeter having 10-uV resolution.

Mallory, R.↗
NASA NTRS1978

Radiometer at a frequency of 108-120 GHz for study of the earth's atmosphere

Calculated and experimental design and operating characteristics of a 108-120 GHz superheterodyne radiometer with intermediate frequency modulation and a second harmonic frequency converter are presented and discussed. With a 1 sec time constant, the radiometer fluctuation sensitivity threshold is 1 K, without degradation in 2 hours of operation. Graphs of frequency variations, calibration, conversion loss, rectified current, fixed bias voltage, and contact needle impedance are included.

Bordonskiy, G. S.↗
NASA NTRS1978

Satellite Power System (SPS) environmental impacts, preliminary assessment

Present power plant assessment factors are used to present satellite power system (SPS) impacts. In contrast to oil, gas, nuclear and coal fueled power plants, the SPS and hydroelectric power plants produce air, water, and solid waste emissions only during the construction phase. Land use impacts result from the placement of rectennas used for microwave receiving and rectifying. Air quality impacts of the SPS resulting from the construction phase amount to 0.405 metric tons per megawatt year. Solid wastes impacts are 0.108 metric tons per year of operation. Other impacts such as those caused by heavy lift launch vehicle sites are also discussed.

Livingston, F. R.↗
NASA NTRS1979

Diode step stress program for JANTX1N1202A

Power/temperature step stress was applied to the switching diode JANTX1N1202A manufactured by General Electric and International Rectifier. A total of 48 samples from each manufacturer was submitted to the process. In addition, two control sample units were maintained for verification of the electrical parametric testing. All test samples were subjected to the electrical tests after completing the prior power/temperature step stress point. Results are given.

Source record↗
NASA NTRS1978

Lightweight multiple output converter development

A high frequency, multiple output power conditioner was developed and breadboarded using an eight-stage capacitor diode voltage multiplier to provide +1200 Vdc, and a three-stage for -350 Vdc. In addition, two rectifier bridges were capacitively coupled to the eight-stage multiplier to obtain 0.5 and 0.65 a dc constant current outputs referenced to +1200 Vdc. Total power was 120 watts, with an overall efficiency of 85 percent at the 80 kHz operating frequency. All outputs were regulated to three percent or better, with complete short circuit protection. The power conditioner component weight and efficiency were compared to the equivalent four outputs of the 10 kHz conditioner for the 8 cm ion engine. Weight reduction for the four outputs was 557 grams; extrapolated in the same ratio to all nine outputs, it would be 1100 to 1400 grams.

Kisch, J. J.↗
NASA NTRS1977

Reconditioning experience at Marshall Space Flight Center

Problems encountered on Skylab prompted the development of a reconditioning circuit which involves a DC to DC converter, a circuit sensing device, and the capability of switching several size reconditioners onto a circuit. Across each cell there is a full bridge rectifier. During battery discharge, if there is low cell voltage, the reconditioning systems holds that voltage up and permits discharge to continue on the system. When the cell is good, the voltage is up about one volt, the diodes are back, or reversed biased, and the current drawn out of the system is very low. The system has a standby power thrown at about one volt. As the voltage drops on a cell, the circuit strts picking up the load and helps hold the overall battery voltage up.

Paschal, L. E.↗
NASA NTRS1979

Multiple scene attitude estimator performance for LANDSAT-1

Initial results are presented to demonstrate the performance of a linear sequential estimator (Kalman Filter) used to estimate a LANDSAT 1 spacecraft attitude time series defined for four scenes. With the revised estimator a GCP poor scene - a scene with no usable geodetic control points (GCPs) - can be rectified to higher accuracies than otherwise based on the use of GCPs in adjacent scenes. Attitude estimation errors was determined by the use of GCPs located in the GCP-poor test scene, but which are not used to update the Kalman filter. Initial results achieved indicate that errors of 500m (rms) can be attained for the GCP-poor scenes. Operational factors are related to various scenarios.

Rifman, S. S.↗
NASA NTRS1979

Investigation of the magnetospheric boundary plasma and magnetic field data from Explorers 33, 43, and 50

Understanding of the plasma depletion process in the dayside magnetosheath, the nature of magnetotail boundary motion, and the geometry of the magnetospheric boundary layers was examined. A model of the dayside boundary layers, based on the hypothesis that merging occurs only for strictly anitparallel fields was developed which provides a qualitative solution to the problem of the half-wave rectifier response of the magnetosphere to the solar wind electric field. Regarding magnetotail boundary motion, consideration of the data led to the conclusion that at lunar distance, substorms are associated with very large amplitude compressional wave motion of the sausage type. A study of IMF orientation for depletion and nondepletion cases suggests that depletion is most likely to occur for angles between the IMF and the normal to the magnetopause at the measurement location near 90 deg, in agreement with predictions. Observations of the heat flux in the dayside magnetosheath plasma suggest that the energized plasma ions have their source along a given flux tube at that intersection with the bow shock where the magnetic field is most compressed.

Siscoe, G. L.↗
NASA NTRS1977

Mass drivers. 3: Engineering

This paper is the last of a series of three by the Mass-Driver Group of the 1977 Ames Summer Study. It develops the engineering principles required to implement the basic mass-driver design defined in paper I and as presented previously in the literature. Optimum component mass trade-offs are derived from a set of four input parameters, and the program used to design a lunar launcher. The mass optimization procedure is then incorporated into a more comprehensive mission optimization program called OPT-4, which evaluates an optimized mass-driver reaction engine and its performance in a range of specified missions. Finally, this paper discusses, to the extent that time permitted, certain peripheral problems: heating effects in buckets due to magnetic field ripple; an approximate derivation of guide force profiles; the mechanics of inserting and releasing payloads; the reaction mass orbits; and a proposed research and development plan for implementing mass drivers. This paper also considers further optimization that depends on advances in component technology beyond the present state. It is concluded that significant advantage can be gained in the case of small reaction engines with high emission velocity by developing lightweight packaging technology for silicon-controlled rectifiers (SCR's).

William H. Arnold↗
NASA NTRS1978

On phase and ray directions of magnetosonic waves

The behavior of phase speed for 'slow' and 'fast' magnetosonic waves is well documented in the literature. Not so well documented is the behavior of the ray direction and its relation to the phase direction - indeed the ray behavior recorded in most of the standard plasma physics texts has not been found. This situation is rectified, and some of the curiosities associated with the direction of the 'slow' ray relative to the direction of the 'slow' phase wave are indicated. These calculations have been performed as a necessary basis for discussion of phase and ray evolution of magnetosonic waves in differentially shearing plasmas.

Lerche, I.↗
NASA NTRS1977

Bit timing with pulse distortion and intersymbol interference

Pulse distortion and intersymbol interference due to insufficient filtering in PCM and PSK channels cause performance degradation in terms of both bit error probabilities and timing errors. This paper reports the results of a study analyzing these effects on bit timing subsystems. Consideration is given to both the filter-rectifier and transition tracking type of timing subsystem. Although both these systems perform similarly in high SNR and ideal pulse models, pulse distortion and intersymbol affects each differently. The primary effects in both systems is to cause the presence of an irreducible mean squared timing error due to the intersymbol which limits the ultimate performance. Design procedures to minimize the anomalies of both systems are presented, and indicate modifications of the standard timing subsystems. It is found that specific design directions depend on whether the intersymbol or the receiver noise tends to dominate.

Gagliardi, R. M.↗