Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “STAN”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 235 records · Page 13
All sourcesNASA NTRSDOE OSTI
NASA NTRS2018

Orion European Structural Test Article Propellant Tank Fill and Drain Carts

Environmental testing of the Orion European Structural Test Article (E-STA), which contains the Orion European Service Module (ESM), required that the onboard propellant tanks be filled and drained with fuel and oxidizer simulant fluids as well as pressurized and de-pressurized with an ullage gas. This conference paper will elaborate on how these objectives were fulfilled by presenting the development of derived requirements definition, initial fill and drain concepts, selection of simulant fluids, finalization of pump and pressurization design, selection of components, selection of transfer hoses and interface connections, as well as development and maintenance of budgets, schedules, reviews, construction, documentation, and test procedures. This paper also describes implementation of checkout and commissioning activities leading to successful fluid cart pumping and pressurization operations for the test campaign. The development, construction, and operation of the fluid cart pumping and pressurization systems for the Environmental testing of the Orion European Structural Test Article (E-STA), took place at the NASA Glenn Research Center's Plum Brook Station Space Environments Complex (SEC) during 2015 and 2016.

Pressurization↗
NASA NTRS2019

3D Printing Heat Shields

Heat shields that protect spacecraft from the heat of entering a planet's atmosphere are labor intensive to manufacture, cost prohibitive and the heat shield design is constrained by the manufacturing process. Little, if any, automation is used to manufacture and install the thermal protection system (TPS) on the vehicles and most heat shields are segmented with many seams and gaps. The goal of this project is to change this paradigm by developing new TPS materials and taking advantage of additive manufacturing technology to automate the processes for making and installing monolithic, ablative TPS on large entry vehicles.

Bouslog, Stan↗
NASA NTRS2019

Commercialization and Human Settlement of the Moon and Cislunar Space Using ISRU, Fission Surface Power, and Advanced In-Space Propulsion Systems

Over 50 years have passed since themovie 2001: A Space Odyssey debuted in April 1968. In the film, Dr. Heywood Floyd flies to a large artificial gravity space station orbiting Earth aboard a commercial space plane. He then embarks on a commuter flight to the Moon arriving there 25 hours later. Today, on the 50th anniversary of the Apollo 11lunar landing, the images portrayed in 2001 remain well beyond our capabilities and 2100: A Space Odyssey seems a more appropriate title for Kubrick and Clarke's film. This paper looks at the key technologies, systems, and supporting infrastructure (in-situ resource utilization (ISRU), fission surface power (FSP), nuclear thermal propulsion (NTP), andorbiting propellant depots), that could be developed by NASA and the private sector over the next 30years allowing the operational capabilities presented in 2001 to be achieved, albeit on a more spartan scale.

Borowski, Stan↗
NASA NTRS2020

Assessing the Impact of Soil Layer Depth Specification on the Observability of Modeled Soil Moisture and Brightness Temperature

The utility of hydrologic land surface models (LSMs) can be enhanced by using information from observational platforms, but mismatches between the two are common.This study assesses the degree to which model agreement with observations (observability) is affected by two mechanisms in particular: 1) physical incongruities between the support volumes being characterized and 2) inadequateor inconsistent parameterizations of physical processes. The Noah and Noah-MP LSMs by default characterize surface soil moisture (SSM) in the top 10 cm of the soil column. This depth may be reasonable when comparing against soil moisture from in situ probes centered at 5 cm,but it is notably different from the 5 cm (or less) sensing depth of NASA’s Soil Moisture Active Passive (SMAP) satellite mission. These depth inconsistencies are examined by using thinner model layers in the Noah and Noah-MP LSMs and comparing resultant simulations to in situ and SMAP soil moisture. In addition, a forward radiative transfer model to simulate microwave brightness temperatures (Tbs) is used to facilitate direct comparisons of LSM-based and SMAP-based L-band Tb retrievals. Observability is quantified using Kolmogorov-Smirnov distance values, calculated from empirical cumulative distribution functions of SSM and Tb time series. Experiment results depend on the particular subspace being analyzed (SSM or Tb). This study concludes that therole of increasedsoil layer discretizationon LSM observability is secondary to the influence of component parameterizations, the effects of which dominate systematic differences with observations

SMAP↗
NASA NTRSDate not supplied

High-Temperature Materials

Overview of high-temperature materials and thermal protection systems used by NASA.

thermal protection systems↗
NASA NTRS2022

Advances in the prediction of MJO-Teleconnections in the S2S forecast systems

This study evaluates the ability of state-of-the-art subseasonal to seasonal (S2S) forecasting systems to represent and predict the teleconnections of the Madden Julian Oscillations and their effects on weather in terms of midlatitude weather patterns and North Atlantic tropical cyclones. This evaluation of forecast systems applies novel diagnostics developed to track teleconnections along their preferred pathways in the troposphere and stratosphere, and to measure the global and regional responses induced by teleconnections across both the Northern and Southern Hemispheres. Results of this study will help the modeling community understand to what extent the potential to predict the weather on S2S time scales is achieved by the current generation of forecasting systems, while informing where to focus further development efforts. The findings of this study will also provide impact modelers and decision makers with a better understanding of the potential of S2S predictions related to MJO teleconnections.

Forecasting↗
NASA NTRSDate not supplied

NASA Efforts to Explore Additively Manufactured Thermal Protection Systems

Development of the thermal protection system (TPS) needed to protect external and internal surfaces during launch, ascent, cruise, and reentry, is a very specialized field with expertise developed over seven decades and has enabled successful robotic as well as human exploration. Well known examples are: 1) the ablative heatshield that protected Apollo Astronauts during reentry in 1960’s, 2) reusable TPS used on the Space Shuttle Orbiter, which is now sought after by commercial space industry, and 3) hot structures, such as Carbon-Carbon and other high temperature materials needed to operate control surfaces and sharp leading edges during hypervelocity flight. TPS function demands fail-safe design to ensure mission success. One TPS does not fit all, and each application requires a unique material along with manufacturing and integration approach. TPS mass is a key metric. A robust but inefficient TPS reduces payload mass. Mission- and domain-unique TPS development and flight certification efforts have been expensive with long lead times. As a result, there are limited TPS choices with high cost. For future commercial efforts to be successful, the ability to rapidly develop TPS, based on specific needs and at a lower cost, without compromising either mass efficiency or functionality is necessary. NASA is looking into this. Additive manufacturing (AM) techniques have shown their utility in making complex parts and, through automation, the potential to reduce cost and schedule in some applications. The promise of additive manufacturing to TPS, while exciting, is unexplored. In the past several years, NASA has made exploratory investments in internal development as well as in small business and universities through SBIR and STTR programs. In addition, NASA is bringing together the TPS as well as Additive Manufacturing communities to explore approaches to prioritize focus areas for broad benefits. The very first “Additively Manufactured Thermal Protection System Workshop,” to be held at NASA Johnson Space Center in Houston at the end of March of this year, is the culmination of a year-long effort to engage the research, development, and user communities involved in both TPS as well as additive manufacturing. The workshop participants include representatives from large and small commercial space industry, DoD, Federally Funded Research and Development Centers, University Researchers and NASA personnel. The proposed talk will highlight future TPS needs of both emerging commercial and Government interests, NASA’s development efforts in additively manufactured TPS, and the findings and recommendations from the first AM TPS Workshop.

Ethiraj Venkatapathy↗
NASA NTRS2022

ALMA Observations of Molecular Complexity in the Large Magellanic Cloud: The N105 Star-Forming Region

The Large Magellanic Cloud (LMC) is the nearest laboratory for detailed studies on the formation and survival of complex organic molecules (COMs), including biologically important ones, in lowmetallicity environments—typical for earlier cosmological epochs. We report the results of 1.2 mm continuum and molecular line observations of three fields in the star-forming region N105 with the Atacama Large Millimeter/submillimeter Array (ALMA). N105 lies at the western edge of the LMC bar with on-going star formation traced by H2O, OH, and CH3OH masers, ultracompact Hii regions, and young stellar objects. Based on the spectral line modeling, we estimated rotational temperatures, column densities, and fractional molecular abundances for twelve 1.2 mm continuum sources. We identified sources with a range of chemical make-ups, including two bona fide hot cores and four hot core candidates. The CH3OH emission is widespread and associated with all the continuum sources. COMs CH3CN and CH3OCH3 are detected toward two hot cores in N105 together with smaller molecules typically found in Galactic hot cores (e.g., SO2, SO, and HNCO) with the molecular abundances roughly scaling with metallicity. We report a tentative detection of the astrobiologically relevant formamide molecule (NH2CHO) toward one of the hot cores; if confirmed, this would be the first detection of NH2CHO in an extragalactic sub-solar metallicity environment. We suggest that metallicity inhomogeneities resulting from the tidal interactions between the LMC and the Small Magellanic Cloud (SMC) might have led to the observed large variations in COM abundances in LMC hot cores.

Marta Sewilo↗