Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “Co”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 235 records · Page 13
All sourcesNASA NTRSDOE OSTI
NASA NTRS1975

Vibrational energy exchange in CO-CO collisions at low temperature

The V-V exchange rates for CO in the ground electronic state have been measured at a temperature of 75 K. The rates determined were for the processes CO(nu = n) + CO(nu = 0) yields CO(nu = n - 1) + CO(nu = 1) - increment E, with n lying in the closed interval from 2 to 8. The values obtained are close to published 100 K data, thus indicating an insensitivity to temperature. It appears that multirotational quantum jumps may be important in explaining the measured rates.

Gower, M. C.↗
NASA NTRS1980

Hot corrosion of Co-Cr, Co-Cr-Al, and Ni-Cr alloys in the temperature range of 700-750 deg C

The effect of SO3 pressure in the gas phase on the Na2SO4 induced hot corrosion of Co-Cr, Ni-Cr, and Co-Cr-Al alloys was studied in the temperature range 700 to 750 C. The degradation of the Co-Cr and Ni-Cr alloys was found to be associated with the formation of liquid mixed sulfates (CoSO4-Na2SO4 or NiSO4-Na2SO4) which provided a selective dissolution of the Co or Ni and a subsequent sulfidation oxidation mode of attack which prevented the maintenance of a protective Cr2O3 film. A clear mechanism was not developed for the degradation of Co-Cr-Al alloys. A pitting corrosion morphology was induced by a number of different mechanisms.

Chiang, K. T.↗
NASA NTRS1985

CO adsorption on (111) and (100) surfaces of the Pt sub 3 Ti alloy. Evidence for parallel binding and strong activation of CO

The CO adsorption on a 40 atom cluster model of the (111) surface and a 36 atom cluster model of the (100) surface of the Pt3Ti alloy was studied. Parallel binding to high coordinate sites associated with Ti and low CO bond scission barriers are predicted for both surfaces. The binding of CO to Pt sites occurs in an upright orientation. These orientations are a consequence of the nature of the CO pi donation interactions with the surface. On the Ti sites the orbitals donate to the nearly empty Ti 3d band and the antibonding counterpart orbitals are empty. On the Pt sites, however, they are in the filled Pt 5d region of the alloy band, which causes CO to bond in a vertical orientation by 5 delta donation from the carbon end.

Mehandru, S. P.↗
NASA NTRS1985

Diurnal CO variations in the Venus mesosphere from CO microwave spectra

Microwave spectra of CO in the Venus mesosphere were measured and analyzed in order to provide mixing profiles. The results indicate that there is a significant dependence of the observed spectra on the phase of Venus. This dependence is tied to a diurnal variation in the vertical profile of CO mixing ratios with the local solar zenith angle. Spectra of the nightside hemisphere are characterized by very little absorption in the wings of the spectra, yet very deep absorption in the line center. Dayside spectra exhibit considerably greater absorption in the line wings and less absorption in the line center. Solutions for the CO mixing profile derived from spectra show that the nightside atmosphere contains two to four times the CO abundance above about 95 km relative to the dayside atmosphere above 95 km. Conversely, the dayside atmosphere between 80 and 90 km shows two to four times the CO abundance for the same altitude region in the nightside atmosphere.

Clancy, R. T.↗
NASA NTRS1988

Studies of CW lasing action in CO2-CO, N2O-CO, CO2-H2O, and N2O-H2O mixtures pumped by blackbody radiation

A proof of principle experiment to evaluate the efficacy of CO and H2O in increasing the power output for N2O and CO2 lasing mixtures has been conducted and theoretically analyzed for a blackbody radiation-pumped laser. The results for N2O-CO, CO2-CO, N2O-H2O and CO2-H2O mixtures are presented. Additions of CO to the N2O lasant increased power up to 28 percent for N2O laser mixtures, whereas additions of CO to the CO2 lasant, and the addition of H2O to both the CO2 and N2O lasants, resulted in decreased output power.

Abel, Robert W.↗
NASA NTRS1992

High-resolution photoabsorption cross sections of E1Pi - X1Sigma(+) vibrational bands of CO-12 and CO-13

Photodissociation following absorption of extreme-ultraviolet photons is an important factor in determining the abundance and isotropic fractionation of CO in diffuse and translucent interstellar clouds. The principal channel for destruction of CO-13 in such clouds begins with absorption in the (1,0) vibrational band of the E1Pi - X1Sigma(+) system; similarly, absorption in the (0,0) band begins a significant destruction channel for CO-12. Reliable modeling of the CO fractionation process depends critically upon the accuracy of the photoabsorption cross section for these bands. We have measured the cross sections for the relevant isotropic species and for the (1,0) band of CO-12. Our results, which are uncertain by about 10 percent, are for the most part larger than previous measurements.

Stark, G.↗
NASA NTRS1993

Structure and energetics of Cr(CO)6 and Cr(CO)5

The geometric structures and energetics of Cr(CO)6 and Cr(CO)5 are determined at the modified coupled-pair functional, single and double excitation coupled-cluster (CCSD), and CCSD(T) levels of theory. For Cr(CO)6, the structure and force constants for the totally symmetric representation are in good agreement with experimental data once basis set constants are taken into account. In the largest basis set at the CCSD(T) level of theory, the total binding energy of CR(CO)6 is estimated at around 140 kcal/mol, or about 86 percent of the experimental value. In contrast, the first bond energy of Cr(CO)6 is very well described at the CCSD(T) level of theory, with the best estimated value of 38 kcal/mol being within the experimental uncertainty.

Barnes, Leslie A.↗
NASA NTRS2022

Ames-2021 CO 2 Dipole Moment Surface and IR Line Lists: Toward 0.1% Uncertainty for CO 2 IR Intensities

A highly accurate CO 2 ab initio dipole moment surface (DMS), Ames-2021, is reported along with 12 C 16 O 2 infrared (IR) intensity comparisons approaching a 1–4‰ level of agreement and uncertainty. The Ames-2021 DMS was accurately fitted from CCSD(T) finite-field dipoles computed with the aug-cc-pVXZ (X = T, Q, 5) basis for C atom and the d-aug-cc-pVXZ (X = T, Q, 5) basis for O atoms, and extrapolated to the one particle basis set limit. Fitting σ(rms) is 3.8 × 10^(–7) au for 4443 geometries below 15 000 per cm . The corresponding IR intensity, S Ames-2021 , are computed using the Ames-2 potential energy surface (PES), which is the best PES available for CO 2 . Compared to high accuracy IR studies for 2001i–00001 and 3001i–00001 bands, S Ames-2021 matches NIST experiment-based intensities [S NIST-HIT16 or S HIT20 ] to −1.0 ± 1.3‰, or matches DLR experiment-based intensities [S DLR-HIT16/UCL/Ames ] to 1.9 ± 3.7‰. This indicates the systematic deviations and uncertainties have been significantly reduced in S Ames-2021 . The S UCL2015 (or S HITRAN2016 ) have larger deviations (vs S DLR ) and uncertainties (vs S DLR , S NIST ) which are attributed to the less accurate Ames-1 PES adopted in UCL-296 line list calculation. The S Ames-2021 intensity of 12 C 16 O 2 and 13 C 16 O 2 is utilized to derive new absolute 13 C/ 12 C ratios for Vienna PeeDee Belemnite (VPDB) with uncertainty reduced by 1/3 or 2/3. Further evaluation of S Ames-2021 are carried out on those CO 2 bands discussed in the HITRAN2020 update paper. Consistent improvements and better accuracies are found in band-by-band analysis, except for those bands strongly affected by Coriolis couplings, or very weak bands measured with relatively larger experimental uncertainties. The Ames-2021 296 K IR line lists are generated for 13 CO 2 isotopologues, with 18,000 per and S 296K > 1E–31) cm/molecule cutoff and then combined with CDSD line positions (except 14 C 16 O 2 ). The Ames-2021 DMS and 296 K IR line lists represent a major improvement over previous CO 2 theoretical IR intensity studies, including Ames-2016, UCL-296, and recent UCL DMS 2021 update. A real 1 permille level of agreement and uncertainty will definitely require both more accurate PES and more accurate DMS.

Chemical calculations↗
NASA NTRS2022

29P/Schwassmann–Wachmann 1: A Rosetta Stone for Amorphous Water Ice and CO↔CO 2 Conversion in Centaurs and Comets?

Centaur 29P/Schwassmann–Wachmann 1 (SW1) is a highly active object orbiting in the transitional "Gateway" region between the Centaur and Jupiter-family comet (JFC) regions. SW1 is unique among the Centaurs in that it experiences quasi-regular major outbursts and produces CO emission continuously; however, the source of the CO is unclear. We argue that, due to its very large size (∼32 km radius), SW1 is likely still responding, via amorphous water ice (AWI) conversion to crystalline water ice (CWI), to the "sudden" change in its external thermal environment produced by its Myrs-long dynamical migration from the Kuiper Belt to its current location at the inner edge of the Centaur region. It is this conversion process that is the source of the abundant CO and dust released from the object during its quiescent and outburst phases. If correct, these arguments have a number of important predictions testable via remote sensing and in situ spacecraft characterization, including the quick release on Myr timescales of CO from AWI conversion for any few kilometer-scale scattered disk Kuiper Belt Objects transiting into the inner system; that to date SW1 has only converted between 50% and 65% of its nuclear AWI to CWI; that volume changes on AWI conversion could have caused subsidence and cave-ins, but not significant mass wasting or crater loss; that SW1's coma should contain abundant amounts of CWI+CO 2 "dust" particles; and that when SW1 transits into the inner system within the next 10,000 yr, it will be a very different kind of JFC.

Centaur 29P/Schwassmann–Wachmann 1(SW1)↗
NASA NTRS2026

In-suit CO 2 Washout Test System (ICWTS) for CO 2 Washout Verification in Spacesuits

Since the time of Mercury, Gemini, and Apollo, NASA has been performing CO 2 washout verification of spacesuits with Human in the Loop (HITL) test methods. Classically, the only instrumentation both with the accuracy and response time necessary was that of external mass spectrometers or medical gas analyzers fed by a long capillary line from the oro-nasal region within the suit. The helmet CO 2 washout configuration including the challenges posed by variation of a suited human subject frequently created difficulty in capturing adequate breath by breath data. For example, a nasal cannula could be worn with reasonable comfort however it posed the following challenges: (1) impeded the test subject’s ability to do a proper Valsalva maneuver; (2) frequently provided a corrupted waveform with relative movement; (3) precluded the ability to evaluate the Flow Weighted Average (FWA) at subject interface. A mouthpiece could be used in lieu of a cannula but posed challenges as well: (1) created potential disturbances of the flow field; (2) precluded the test subject from speaking during usage; and (3) presented comfort issues limiting the duration of test points. These challenges made it impractical to use a mouthpiece for anything other than short lab ambient environment tests. Technology development and NASA investment have afforded new capabilities to address some of these measurements providing improved data collection and are implemented in the In-suit CO 2 Washout Test System (ICWTS) which provides suit inlet/outlet pressure, temperature, relative humidity, partial pressure of oxygen, partial pressure of CO 2 , and flow measurement coupled with the acquisition of the inspired PPCO 2 including the ability for FWA measurement. This test system, coupled with use of the In-suit Respiration Mannequin Assembly (IRMA) and Computational Fluid Dynamics (CFD) combine to provide a full picture of the in-suit oro-nasal flow field and effectiveness of CO 2 washout in a spacesuit design.

Colin Campbell↗
DOE OSTI2020

Pressure falloff testing to characterize CO 2 plume and dry-out zone during CO 2 injection in saline aquifers

The fluid mobilities and the lateral extent of the CO 2 plume and the dry-out zone are among important unknowns required to effectively manage CO 2 storage in saline aquifers projects. These unknowns can be derived from pressure falloff testing which has been widely used to characterize the subsurface. This paper provides a three-region analytical solution for falloff pressure during the infinite-acting period of CO 2 injection in saline aquifers. The solution is derived using Laplace transformation technique of the governing diffusivity equations and the accompanying initial and boundary conditions. The exact solution is validated against numerical results obtained from a black-oil reservoir simulator for two cases. The solution is approximated into simple forms in real-time domain considering different time periods. Then, a graphical semi-log analysis technique based on the approximate solutions is provided as an interpretation tool of falloff tests where the fluid mobilities and the extents of dry-out zone and CO 2 plume can be inferred. The interpretation technique is applied to synthetic falloff test data to investigate its potential and reliability.

02 PETROLEUM↗
DOE OSTI2024

Dynamic modeling studies of basin-scale pressure interference and CO 2 plume evolution in multi-well geologic CO 2 storage

This research employs numerical modeling to analyze how CO 2 plumes and pressure fronts evolve when CO 2 is injected into a single storage formation from multiple projects located in proximity. Here, this analysis also evaluates the extent to which injection well spacing alleviates pressure buildup in the absence of active pressure management tactics. The simulation approach was based on a single, homogenous saline aquifer in which CO 2 injection occurs under a one-injector baseline case and several multi-well cases where well spacing varies. Analysis results show that the extent of pressure buildup is in the range of tens or a few hundreds of kilometers and contingent upon the defining pressure buildup demarcating the front edge. For the geological setting evaluated in this paper, our analysis suggests that without active basin pressure management strategies, commercial-scale projects would likely need to be sited far apart to avoid pressure interference from one another. Analysis results show the radius of CO 2 plume varies approximately from 2 to 3 km from injection wells (each injecting 1 Mt/year for 30 years) depending on cases and modeling parameters assumed. Given the pressure interference, this paper thus draws attention to the importance of greater coordination among storage operators and regulatory stakeholders. Because this analysis assumes a very specific geologic setting, this exploratory analysis bears further investigations across other geologic scenarios.

42 ENGINEERING↗
DOE OSTI2023

Electrolyzer energy dominates separation costs in state-of-the-art CO 2 electrolyzers: Implications for single-pass CO 2 utilization

In low-temperature CO 2 electrolysis, a fundamental trade-off exists between maximizing electrolyzer performance and minimizing downstream CO 2 recovery. Here, by coupling a down-the-gas-channel electrolyzer model with a techno-economic analysis, we find that the optimal single-pass CO 2 conversion for ethylene production is typically low—on the order of 5%–10%—although larger optima are found if the H 2 faradic efficiency is very low. Similarly, strategies for eliminating carbonate crossover require more energy than downstream gas separation if they increase the cell potential by ~0.2 V; however, when CAPEX are accounted for, this “break-even” voltage increases to ~ 0.4 to 0.8 V for electricity prices varying from 6c/kWh to 1.5c/kWh. These findings are a consequence of the low energy requirements of industrial gas separation relative to electrochemical CO 2 reduction. Under most circumstances, maintaining near-optimal electrolyzer performance is more important than reducing or eliminating downstream gas separations.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2025

Reservoir Dynamics in Proposed Operational Scenarios Where CO 2 -EOR Fields are Transitioned From CO 2 -Flood Enhanced Oil Recovery to Dedicated Carbon Storage: A Field Case Study

This study models the transition of CO 2 -enhanced oil recovery (CO 2 -EOR) fields to dedicated carbon storage using a generalized reservoir model informed by real field data, SACROC. Through scenario-based simulations, the work evaluates how reservoir depletion levels, boundary conditions, fluid properties, and domain size affect pressure buildup, CO 2 plume migration, and long-term containment performance. The results inform practices for repurposing oil fields into reliable CO 2 storage sites.

02 PETROLEUM↗
DOE OSTI2026

Co‐Electrolysis of CO 2 and H 2 O to Syngas on Bimetallic Pd x Cu 1‐ x Catalysts for Tandem Thermochemical Conversion to Carbon Nanofibers

Electrification of chemical production using renewable energy and abundant feedstocks offers a promising pathway for decarbonizing the chemical industry. Current efforts on CO 2 valorization largely focus on making chemicals and fuels. Here, to help achieve net-negative emissions through long-term carbon storage, this study aims to develop efficient electrocatalysts for a tandem electrochemical-thermochemical process to convert CO 2 into carbon nanofibers (CNFs). CO 2 and water are first electrochemically reduced in a membrane electrode assembly (MEA) electrolyzer to produce syngas (CO + H 2 ), which is subsequently fed into a thermochemical packed bed reactor to facilitate CNF growth. This work systematically evaluated Pd x Cu 1-x bimetallic electrocatalysts to assess the effect of Pd–Cu alloying on enhancing syngas production while reducing Pd loading. Transmission electron microscopy and Raman spectroscopy confirmed the formation of high-purity, crystalline CNFs, regardless of the syngas composition from the MEA. In situ X-ray absorption spectroscopy and X-ray diffraction measurements revealed that increasing Cu content in the Pd x Cu 1-x alloy progressively inhibited palladium hydride formation, consistent with DFT calculations on the stability of Pd x Cu 1-x under reducing electrochemical potentials.

58 GEOSCIENCES↗
DOE OSTI2026

Spin‐Polarized Interfaces Redirect CO 2 Reduction From CO to Formate

Achieving high product selectivity in electrocatalytic carbon dioxide reduction (CO 2 RR) remains a critical challenge due to competition between multiple proton-coupled electron-transfer pathways on catalyst surfaces. Meanwhile, chirality-induced spin selectivity (CISS), which enables spin-polarized electron transport through chiral interfaces, has recently emerged as a promising strategy to modulate interfacial electrochemical reactions. Although the CISS effect has been shown to enhance selectivity and efficiency in the spin-sensitive oxygen evolution reaction (OER), its role in regulating CO 2 RR pathways and in stabilizing intermediates remains largely unexplored. Here, chiral molecules (R- and S-1,1′-bi-2-naphthyl-2,2′-diyl hydrogen phosphate, BNP) were integrated with SnO 2 to construct chiral-modified catalysts (R-BNP/SnO 2 and S-BNP/SnO 2 ). Compared with bare SnO 2 and racemic BNP-modified SnO 2 (Rac-BNP/SnO 2 ), the chiral catalysts exhibited a pronounced shift in product selectivity from CO toward formate production. Importantly, in-situ attenuated total reflectance surface-enhanced infrared absorption spectroscopy (ATR-SEIRAS) reveals that the chiral interface selectively stabilizes the O-bound *OCHO intermediate associated with the formate pathway and modulates interfacial water structure and hydrogen-bonding dynamics. These findings demonstrate that spin-polarized interfacial electron transfer can regulate CO 2 RR pathway selectivity by modulating the stabilization of key intermediates. More broadly, this work establishes chiral spin-selective interfaces as a new strategy for regulating competitive electrocatalytic reaction pathways.

14 SOLAR ENERGY↗
DOE OSTI2020

Effect of Pressure and Thermal Cycling on Long-Term Oxidation in CO 2 and Supercritical CO 2

Concentrating solar power plant designers are interested in supercritical CO 2 (sCO 2 ) for the power block to achieve > 50% electrical efficiency at > 700 °C. The goal of this project was to develop a long-term (> 100 kh) lifetime model for sCO 2 compatibility using 10–15 kh laboratory exposures. Three Ni-based alloys (625, 282 and 740H) and an advanced austenitic stainless steel were evaluated here in long-term exposures at 700–800 °C using 500-h cycles in laboratory air, 0.1 MPa industrial grade (IG) CO 2 and 30 MPa supercritical IG CO 2 and using 10-h cycles in 0.1 MPa IG CO 2 and O 2 . Mass change data and quantification of the oxide scale thickness and depth of internal attack after 1000–10,000 h exposures at 750 °C indicate that these materials are compatible with the sCO 2 environments with modeling used to predict long-term behavior. Comparison of the 0.1 and 30 MPa 500-h cycle results did not show a significant effect of pressure on the reaction, and no significant internal carburization was observed under these conditions, even for the stainless steel, suggesting that chromia scales may be better C diffusion barriers than expected. For the Ni-based alloys, thermal cycling to simulate the solar duty cycle did not result in scale spallation after 15 kh in 10-h cycles or 4 kh in 1-h cycles at 750 °C. However, the stainless steel specimens formed an Fe-rich oxide after ~ 1500-h cumulative exposure time in both 1- and 10-h cycles.

36 MATERIALS SCIENCE↗