SEARCH · Engineering Papers
Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.
Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.
Contact formed on p-type surface of semiconductor laser has several advantages: highly conductive degenerate region and narrow band gap provides surface for good metal-to-semiconductor contact; lattice parameter of GaAs is 5.6533 A; improved lattice match eases interface strain which reduces interface cracking of semiconductor material.
A surface potential model is developed to explain dopant effects on chemical vapor deposition. Auger analysis of the interaction between allotropic forms of carbon and silicon films has shown Si-C formation for all forms by glassy carbon. LEED intensity measurements have been used to determine the mean square displacement of surface atoms of silicon single crystals, and electron loss spectroscopy has shown the effect of structure and impurities on surface states located within the band gap. A thin film of Al has been used to enhance film crystallinity at low temperature.
Research results are reported for GaAs Schottky barrier solar cells, GaAlAs/GaAs heteroface solar cells, and GaAlAs graded band gap solar cells. Related materials studies are presented. A systems study for GaAs and Si solar concentrator systems is given.
Fundamental limitations imposed on the performance of silicon junction solar cells by physical mechanisms accompanying high doping are described. The one-dimensional mechanisms divide into two broad categories: those associated with band-gap shrinkage and those associated with interband transition rates. By extending the traditional method of analysis and comparing with measurement, it is shown that the latter kind of mechanism dominates in determining the open-circuit voltage in a one-dimensional model of a 0.1 ohm-cm cell at 300 K. As an alternative dominant mechanism, a three-dimensional model involving thermodynamically stable clusters of impurities in the highly-doped diffused layer is suggested.
The Viking Project utilized a 16.2M diameter disk-gap-band parachute to successfully land two research spacecraft on the surface of Mars during the summer of 1976. Unique specifications were imposed upon both the decelerator system and the balloon systems which were employed to provide a high altitude launch platform for a rocket powered test vehicle. The performance and stability of the balloon system and the predictability of the test vehicle trajectory offered interesting challenges. Descriptions of the development work for suitable materials, fabrication techniques and peculiarities, and testing requirements for both the decelerator and balloon systems will be presented.
High-efficiency p-Ga(1-x)Al(x)As, p-GaAs, n-GaAs solar cells are made by isothermally soaking n-GaAs substrates in an undersaturated Zn-doped Ga-Al-As melt. This one-step growth procedure produces a graded band gap p-Ga(1-x)Al(x)As layer 0.2-0.4 micron thick. Efficiencies of 18.5% AM0 and 21.9% AM1 have been measured.
A computer simulation of silicon solar cells has indicated that the combination of band gap reduction due to heavy doping and certain spatial forms of lifetime dependence can combine to form severe limitations on the open-circuit voltage of such cells. The interaction of these effects tends to shift the active region of the diffused surface layer away from the injecting junction, resulting in an increase in the current density injected into the surface region. Reductions in open circuit voltage as great as 10% over models which do not include these effects can be seen.
The greatest gains in solar energy conversion efficiency of p-n-junction silicon solar cells come from increasing the open-circuit voltage V sub OC; it is important to understand and characterize the material parameters that limit the V sub OC. Strong experimental evidence exists to support the assertion that either an anomalously large minority carrier charge storage or an anomalously small minority carrier lifetime in the quasi-neutral emitter region limits the open circuit voltage. A method is presented for measuring charge storage and effective lifetime. Static and transient measurements are analyzed using physical models of the solar cell characteristics. This analysis yields the emitter charge storage and life-time, which then can be related to the various physical mechanisms, such as energy band gap shrinkage, that have been proposed earlier as responsible for limiting V sub OC.
Titanium dioxide (TiO2) films prepared by chemical vapor deposition were investigated in this study for the purpose of the application in the GaAs metal-insulator-semiconductor field-effect transistor. The degree of crystallization increases with the deposition temperature. The current-voltage study, utilizing an Al-TiO2-Al MIM structure, reveals that the d-c conduction through the TiO2 film is dominated by the bulk-limited Poole-Frenkel emission mechanism. The dependence of the resistivity of the TiO2 films on the deposition environment is also shown. The results of the capacitance-voltage study indicate that an inversion layer in an n-type substrate can be achieved in the MIS capacitor if the TiO2 films are deposited at a temperature higher than 275 C. A process of low temperature deposition followed by the pattern definition and a higher temperature annealing is suggested for device fabrications. A model, based on the assumption that the surface state densities are continuously distributed in energy within the forbidden band gap, is proposed to interpret the lack of an inversion layer in the Al-TiO2-GaAs MIS structure with the TiO2 films deposited at 200 C.
Palladium metal films are prepared on quartz substrates by RF sputtering from a pure palladium target in an argon atmosphere. These films are then oxidized in air or in an oxygen atmosphere at 700 C for periods between 24 hr and 6 days. Either treatment is found to produce good-quality thin films of PdO with a uniform orange transmission. Attention is focused on optical and electrical conductivity measurements made on PdO films with a view toward determining their band gap, conductivity and thermal stability in vacuum and in the presence of oxygen. It is shown that hydrogen greatly reduces the thermal stability of PdO. The film decomposes to Pd metal by 350 K in the presence of hydrogen as compared to a temperature of about 580 K in vacuum.
The oxygen plasma oxidation of GaAs was studied in order to obtain extremely high frequency responses with MOS devices. In the multipole system a homogeneous oxygen plasma of high density can easily be obtained in a large volume. This system is thus convenient for the study of plasma oxidation of GaAs. The electrical properties of the MOS diodes obtained in this way are controlled by interface states, located mostly in the upper half of the band gap where densities in the 10 to the 13th power/(sq cm) (eV) range can be estimated. Despite these interface states the possibility of fabricating MOSFET transistors working mostly in the depletion mode for a higher frequency cut-off still exists.
Photoelectrochemical systems for the efficient decomposition of water are discussed. Semiconducting d band oxides which would yield the combination of stability, low electron affinity, and moderate band gap essential for an efficient photoanode are sought. The materials PdO and Fe-xRhxO3 appear most likely. Oxygen evolution yields may also be improved by mediation of high energy oxidizing agents, such as CO3(-). Examination of several p type semiconductors as photocathodes revealed remarkable stability for p-GaAs, and also indicated p-CdTe as a stable H2 photoelectrode. Several potentially economical schemes for photoelectrochemical decomposition of water were examined, including photoelectrochemical diodes and two stage, four photon processes.
Superlattice layers are effective in decreasing the density of dislocations in lattice mismatched heterostructures at least four orders of magnitude. Hence it was proposed to utilize this feature of superlattices to alleviate the problems due to misfit dislocations generated in the regions between two or more photovoltaic collecting junctions. A further advantage is that the possibility is presented for using silicon as a low cost substrate as well as for the low band gap junction. In the test case, a silicon low gap cell was connected to a GaAs.7P.3 high gap cell through a connecting region containing a GaAs/GaP superlattice.
P-side backside reflecting constant, photodiode characterization, and photodiode diffusion and G-R currents were investigated in an effort to develop an 8 m to 12 m infrared quantum detector using mercury cadmium telluride. Anodization, phosphorus implantation, and the graded band gap concept were approaches considered for backside formation. Variable thickness diodes were fabricated with a back surface anodic oxide to investigate the effect of this surface preparation on the diffusion limited zero bias impedance. A modeling technique was refined to thoroughly model diode characteristics. Values for the surface recombination velocity in the depletion region were obtained. These values were improved by implementing better surface damage removal techniques.
A specially configured 16.6 foot (5.1 meter) Disc Gap Band (DGB) Spin Parachute has been designed, developed, integrated with a sounding rocket, and qualified by flight testing. Design requirements include (1) stable parachute should successfully deploy in the altitude region of 260,000 feet (80 kilometers) from a Super Arcas launch vehicle; (2) after deployment, parachute and payload spin rate should be greater than three rpm; (3) four electric field sensors should be mounted on parachute shroud lines and have provisions to be electrically connected to the suspended payload; and (4) time above 100,000 feet (30 kilometers) should exceed five minutes. The successful meeting of these requirements provided the first known high-altitude deployment of a Spin Parachute.
A miniaturized Cassegrainian-type concentrator solar array concept for space applications is described. In-orbit cell operating temperatures near 80 C are achieved with purely passive cell cooling and a net concentration ratio of 100. A multiplicity of miniaturized, rigid solar cell concentrator subassemblies are electrically interconnected in conventional fashion and mounted into rigid frames to form concentrator solar panel assemblies approximately 14-mm thick. A plurality of such interconnected panels forms a stowable and deployable solar cell blanket. It is projected that for 20% efficient silicon cells an array of 500 kW beginning-of-life output capability, including orbiter cradle structures, can be transported by a single shuttle orbiter flight into low earth orbit. In-orbit array specific performance is calculated to be approximately 100 W/sq m and 20 W/kg, including all stowage, deployment and array figure control equipment designed for a 30-year orbital life. Higher efficiency gallium arsenide and multiple band gap solar cells will improve these performance factors correspondingly.
Electron beam probe technique estimate electron/hole capture cross sections in semiconductors with wide band gaps. Amplitude-modulated electron beam induces short-circuit current collected by ohmic contacts. Phase shift between this current and electron-beam current measured as function of frequency. Results of measurements used to ascertain recombination rates and energy levels.
The bulk growth of solid solution alloys of mercury telluride and cadmium telluride is discussed. These alloys are usually described by the formula Hg1-xCdxTe, and are useful for the construction of infrared detectors. The electronic energy band gap can be controlled between zero and 1.6 electron volts by adjusting the composition x. The most useful materials are at x approximately 20%, suitable for detection wavelengths of about 10 micrometers. The problems of growing large crystals are rooted in the wide phase diagram of the HgTe-CdTe pseudobinary system which leads to exaggerate segregation in freezing, constitutional supercooling, and other difficulties, and in the high vapor pressure of mercury at the growth temperatures, which leads to loss of stoichiometry and to the necessity of working in strong, pressure resistant sealed containers.