SEARCH · Engineering Papers

Results for “springs”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

SourceResearch connectionFrom yearThrough year

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 217 records · Page 12

All sources NASA NTRS DOE OSTI

NASA NTRS1977

Response of winter and spring wheat grain yields to meteorological variation

Mathematical models which quantify the relation of wheat yield to selected weather-related variables are presented. Other sources of variation (amount of applied nitrogen, improved varieties, cultural practices) have been incorporated in the models to explain yield variation both singly and in combination with weather-related variables. Separate models were developed for fall-planted (winter) and spring-planted (spring) wheats. Meteorological variation is observed, basically, by daily measurements of minimum and maximum temperatures, precipitation, and tabled values of solar radiation at the edge of the atmosphere and daylength. Two different soil moisture budgets are suggested to compute simulated values of evapotranspiration; one uses the above-mentioned inputs, the other uses the measured temperatures and precipitation but replaces the tabled values (solar radiation and daylength) by measured solar radiation and satellite-derived multispectral scanner data to estimate leaf area index. Weather-related variables are defined by phenological stages, rather than calendar periods, to make the models more universally applicable.

Feyerherm, A. M.↗

NASA NTRS1979

Spring control of wire harness loops

Negator spring control guides wire harness between movable and fixed structure. It prevents electrical wire harness loop from jamming or being severed as wire moves in response to changes in position of aircraft rudder. Spring-loaded coiled cable controls wire loop regardless of rudder movement.

Curcio, P. J.↗

NASA NTRS1980

Flow Induced Spring Coefficients of Labyrinth Seals for Application in Rotor Dynamics

Flow induced aerodynamic spring coefficients of labyrinth seals are discussed and the restoring force in the deflection plane of the rotor and the lateral force acting perpendicularly to it are also considered. The effects of operational conditions on the spring characteristics of these components are examined, such as differential pressure, speed, inlet flow conditions, and the geometry of the labyrinth seals. Estimation formulas for the lateral forces due to shaft rotation and inlet swirl, which are developed through experiments, are presented. The utilization of the investigations is explained and results of stability calculations, especially for high pressure centrifugal compressors, are added. Suggestions are made concerning the avoidance of exciting forces in labyrinths.

Benckert, H.↗

NASA NTRS1980

Effects of management practices on reflectance of spring wheat canopies

The effects of available soil moisture, planting date, nitrogen fertilization, and cultivar on reflectance of spring wheat (Triticum aestivum L.) canopies were investigated. Spectral measurements were acquired on eight dates throughout the growing season, along with measurements of crop maturity stage, leaf area index, biomass, plant height, percent soil cover, and soil moisture. Planting date and available soil moisture were the primary agronomic factors which affected reflectance of spring wheat canopies from tillering to maturity. Comparisons of treatments indicated that during the seedling and tillering stages planting date was associated with 36 percent and 85 percent of variation in red and near infrared reflectances, respectively. As the wheat headed and matured, less of the variation in reflectance was associated with planting date and more with available soil moisture. By mid July, soil moisture accounted for 73 percent and 69 percent of the variation in reflectance in red and near infrared bands, respectively. Differences in spectral reflectance among treatments were attributed to changes in leaf area index, biomass, and percent soil cover. Cultivar and N fertilization rate were associated with very little of the variation in the reflectance of these canopies.

Daughtry, C. S. T.↗

NASA NTRS1980

Preliminary evaluation of the Environmental Research Institute of Michigan crop calendar shift algorithm for estimation of spring wheat development stage

An algorithm for estimating spectral crop calendar shifts of spring small grains was applied to 1978 spring wheat fields. The algorithm provides estimates of the date of peak spectral response by maximizing the cross correlation between a reference profile and the observed multitemporal pattern of Kauth-Thomas greenness for a field. A methodology was developed for estimation of crop development stage from the date of peak spectral response. Evaluation studies showed that the algorithm provided stable estimates with no geographical bias. Crop development stage estimates had a root mean square error near 10 days. The algorithm was recommended for comparative testing against other models which are candidates for use in AgRISTARS experiments.

Phinney, D. E.↗

NASA NTRS1980

Crop identification studies using Landsat data Separation of barley from other spring small grains and corn and soybean decision logic

Two labeling procedures were developed which identify various agricultural crops through the use of Landsat data. One procedure separates barley from other spring small grains, and the other identifies corn and soybeans. For both procedures, a minimum data set (critical acquisition time) has been designated. Landsat data in both image format and various graphic displays were used along with ancillary data to obtain information which aided in labeling the spectral signatures. The corn and soybean procedure also employed a structured decision logic. Test results for the barley separation procedure emphasized the importance of obtaining a critical acquisition and showed some success especially in areas where spring crops followed the expected growth patterns. Two tests of the corn and soybean procedure produced good labeling accuracies. Problems with the procedure were easy to identify, and some solutions were implemented for the second test. Automation of various parts of the procedure and extension to other crops and regions were recommended.

Dailey, C. L.↗

NASA NTRS1982

Squeeze-Film-Damped Spring for Turbopumps

New use for squeeze-film damping proposed for turbopump bearings. Damping of axial shaft vibrations improved with properly-designed squeeze-film spring. Capillary-squeeze-film springs damp turbopump shaft axial vibrations. Disks deflect to left and right as pump bearing vibrates. Fluid fills and empties from spaces between disks to damp vibration.

Rothe, K.↗

NASA NTRS1981

Recommended data sets, corn segments and spring wheat segments, for use in program development

The sets of Large Area Crop Inventory Experiment sites, crop year 1978, which are recommended for use in the development and evaluation of classification techniques based on LANDSAT spectral data are presented. For each site, the following exists: (1) accuracy assessment digitized ground truth; (2) a minimum of 5 percent of the scene ground truth identified as corn or spring wheat; and (3) at least four acquisitions of acceptable data quality during the growing season of the crop of interest. The recommended data sets consist of 41 corn/soybean sites and 17 spring wheat sites.

Austin, W. W.↗

NASA NTRS1982

Application of the line-spring model to a cylindrical shell containing a circumferential or axial part-through crack

The line-spring model developed by Rice and Levy (1972) is used to obtain an approximate solution for a cylindrical shell containing a part-through surface crack. A Reissner type theory is used to account for the effects of the transverse shear deformations, and the stress intensity factor at the deepest penetration point of the crack is tabulated for bending and membrane loading by varying three-dimensionless length parameters of the problem formed from the shell radius, the shell thickness, the crack length, and the crack depth. The upper bounds of the stress intensity factors are provided, and qualitatively the line-spring model gives the expected results in comparison with elasticity solutions.

Delale, F.↗

NASA NTRS1983

Comparison of CRD, APU, and state models for Iowa corn and soybeans and North Dakota barley and spring wheat

A comparison was made among the CEAS crop reporting district (CRD), agrophysical unit (APU), and state level multiple regression yield models for corn and soybeans in Iowa and barley and spring wheat in North Dakota. The best predictions were made by the state model for North Dakota spring wheat, by the APU models for barley, by the CRD models for Iowa soybeans, and by APU covariance models for Iowa corn. Because of this lack of consistency of model performance, CRD models would be recommended due to the availability of the data.

French, V.↗

NASA NTRS1983

Early season spring small grains direct proportion estimation - Development and evaluation of a Landsat based methodology

The Inventory Technology Development (ITD) project of the Agriculture and Resources Inventory Surveys Through Aerospace Remote Sensing (AgRISTARS) program has developed an accurate, automated technology for early season estimation of spring small grains areal proportion from Landsat MSS data. The design criteria for an early season procedure included estimates available within the first 30 days of the growing season, low data processing/preprocessing requirements and no need for scene-to-scene registration. The prototype estimator which meets the design goals is based on a constrained linear model in which the observed spectral response of an entire scene is modeled as a linear combination of the major constituent elements in the scene. The procedure was evaluated over 100 sample segments collected for crop years 1976 through 1979 in the U.S. Northern Great Plains. Analysis of the test results indicated accuracy that compare favorably with both the automated at-harvest technologies tested during the FY81-82 AgRISTARS Spring Small Grains Pilot experiments and earlier analyst-intensive at-harvest technologies.

Phinney, D. E.↗

NASA NTRS1984

Satellite passive microwave rain rate measurement over croplands during spring, summer and fall

Rain-rate algorithms for spring, summer and fall that have been developed from comparisons between the brightness temperatures measured by the Nimbus-7 Scanning Multichannel Microwave Radiometer (SMMR) and rain rates derived from operational WSR-57 radars over land are described. Data were utilized from a total of 25 SMMR passes and 234 radars, resulting in about 12,000 observations of about 1600 sq/km areas. Multiple correlation coefficients of 0.63, 0.80 and 0.75 are achieved for the spring, summer and fall algorithms, respectively. Most of this information is in the form of multifrequency contrast in brightness temperature, which is interpreted as a measurement of the degree to which the land-emitted radiation is attenuated by the rain systems. The SMMR 37-GHz channel has more information on rain rate than any other channel. By combining the lower frequency channels with the 37-GHz observations, variations in land and precipitation thermometric temperatures can be removed, leaving rain attenuation as the major effect on brightness temperature. Polarization screening at 37 GHz is found to be sufficient to screen out cases of wet ground, which is only important when the ground is relatively vegetation free. Heavy rain cases are found to be significant part of the algorithms' success, because of the strong microwve signatures (low-brightness temperatures) that result from the presence of precipitation-sized ice in the upper portions of heavily precipitating storms. If IR data are combined with the summer microwave data, an improved (0.85) correlation with radar rain rates is achieved.

Spencer, R. W.↗

NASA NTRS1986

Oscillation Damper With Two Spring Rates

Hydraulic damping used in device developed to stabilize vibrating structure in space. Damping mechanism stops oscillation of attached boom. Two bellows provide fluid damping. Springs are engaged when extra spring force required. Otherwise they retract. Mechanism especially useful for arresting oscillatory motion of slender boom with large mass. On Earth, such configurations arise in design of masts and cranes.

Sevilla, D. R.↗

NASA NTRS1986

Spring Small Grains Area Estimation

SSG3 automatically estimates acreage of spring small grains from Landsat data. Report describes development and testing of a computerized technique for using Landsat multispectral scanner (MSS) data to estimate acreage of spring small grains (wheat, barley, and oats). Application of technique to analysis of four years of data from United States and Canada yielded estimates of accuracy comparable to those obtained through procedures that rely on trained analysis.

Palmer, W. F.↗

NASA NTRS1986

Spring-Loaded Joule-Thomson Valve

Improved design reduces clogging and maintains constant pressure drop as flow rate varies. Spring-Loaded Joule-Thomson Valve pressure drop regulated by spring pushing stainless-steel ball against soft brass seat. Pressure drop remains nearly constant, regardless of helium flow rate and of any gas contaminants frozen on valve seat. Because springloaded J-T valve maintains constant pressure drop, upstream roomtemperature throttle valve adjusts flow rate precisely for any given upstream pressure. In addition, new valve relatively invulnerable to frozen gas contaminants, which clog fixed-orifice J-T valves.

Jones, J. A.↗

NASA NTRS1986

Satellite detection of phytoplankton export from the mid-Atlantic Bight during the 1979 spring bloom

Analysis of Coastal Zone Color Scanner (CZCS) imagery confirms shipboard and in situ moored fluorometer observations of resuspension of near-bottom chlorophyll within surface waters (1 to 10 m) by northwesterly wind events in the mid-Atlantic Bight. As much as 8 to 16 micrograms chl/l are found during these wind events from March to May, with a seasonal increase of algal biomass until onset of stratification of the water column. Rapid sinking or downwelling apparently occurs after subsequent wind events, however, such that the predominant surface chlorophyll pattern is approx. 0.5 to 1.5 micrograms/l over the continental shelf during most of the spring bloom. Perhaps half of the chlorophyll increase observed by satellite during a wind resuspension event represents in-situ production during the 4 to 5 day interval, with the remainder attributed to accumulation of algal biomass previously produced and temporarily stored within near-bottom water. Present calculations suggest that about 10% of the primary production of the spring bloom may be exported as ungrazed phytoplankton carbon from mid-Atlantic shelf waters to those of the continental slope.

Walsh, J. J.↗

NASA NTRS1986

Wind effects on coastal zone color scanner chlorophyll patterns in the U.S. Mid-Atlantic Bight during spring 1979

Coastal zone color scanner (CZCS) chlorophyll concentration increases in the Mid-Atlantic Bight were associated with high wind speeds in continental shelf waters during March and May 1979. Maximum spring CZCS chlorophyll concentrations occurred during April when the water column was not thermally stratified and were spatially and temporally associated with reductions in wind speed both in onshelf and in offshelf regions. Increased chlorophyll concentrations in offshelf waters were associated with high wind speeds during May when a deep chlorophyll maximum was present. Chlorophyll patchiness was observed on length scales typical of those controlled by biological processes during the April low-wind period but not during March or May when wind speeds were greater. The spring CZCS chlorophyll maximum in the southern portion of the Mid-Atlantic Bight occurred in response to a reduction in mixed layer depth caused by decreased wind speeds and not by increased water column stratification.

Eslinger, David L.↗

NASA NTRS1989

Spring-Blade Impact Tester

Record of energy relationships retrieved from compact, portable tester. Spring-blade impact tester developed to support evaluation of tolerance to damage of struts under consideration for use in Space Station. Approach offers potential for determining damage as function of change in relationship between applied and absorbed energies as applied energy successively increased with each impact. Impactor strikes specimen at moment of maximum kinetic energy after spring blades released from cocked position. Concept also provides potential for measuring behavior during impact, and energy relationships retrievable from oscilloscope traces of impact.

Holmes, Alan M.↗