Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “specific surface area”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 217 records · Page 12
All sourcesNASA NTRSDOE OSTI
DOE OSTI2023

Robust Copper-Based Nanosponge Architecture Decorated by Ruthenium with Enhanced Electrocatalytic Performance for Ambient Nitrogen Reduction to Ammonia

Electrochemical conversion of nitrogen to green ammonia is an attractive alternative to the Haber–Bosch process. However, it is currently bottlenecked by the lack of highly efficient electrocatalysts to drive the sluggish nitrogen reduction reaction (N2RR). In this work, we strategically design a cost-effective bimetallic Ru–Cu mixture catalyst in a nanosponge (NS) architecture via a rapid and facile method. The porous NS mixture catalysts exhibit a large electrochemical active surface area and enhanced specific activity arising from the charge redistribution for improved activation and adsorption of the activated nitrogen species. Benefiting from the synergistic effect of the Cu constituent on morphology decoration and thermodynamic suppression of the competing hydrogen evolution reaction, the optimized Ru 0.15 Cu 0.85 NS catalyst presents an impressive N 2 RR performance with an ammonia yield rate of 26.25 μg h –1 mg cat. –1 (corresponding to 10.5 μg h –1 cm –2 ) and Faradic efficiency of 4.39% as well as superior stability in alkaline medium, which was superior to that of monometallic Ru and Cu nanostructures. Additionally, this work develops a new bimetallic combination of Ru and Cu, which promotes the strategy to design efficient electrocatalysts for electrochemical ammonia production under ambient conditions.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2021

Silicon-silicon oxide-carbon composites for lithium battery electrodes and methods for forming the composites

Composite silicon based materials are described that are effective active materials for lithium ion batteries. The composite materials comprise processed, e.g., high energy mechanically milled, silicon suboxide and graphitic carbon in which at least a portion of the graphitic carbon is exfoliated into graphene sheets. The composite materials have a relatively large surface area, a high specific capacity against lithium, and good cycling with lithium metal oxide cathode materials. The composite materials can be effectively formed with a two step high energy mechanical milling process. In the first milling process, silicon suboxide can be milled to form processed silicon suboxide, which may or may not exhibit crystalline silicon x-ray diffraction. In the second milling step, the processed silicon suboxide is milled with graphitic carbon. Composite materials with a high specific capacity and good cycling can be obtained in particular with balancing of the processing conditions.

Anguchamy, Yogesh Kumar↗
DOE OSTI2023

Methods for forming silicon-silicon oxide-carbon composites for lithium ion cell electrodes

Composite silicon based materials are described that are effective active materials for lithium ion batteries. The composite materials comprise processed, e.g., high energy mechanically milled, silicon suboxide and graphitic carbon in which at least a portion of the graphitic carbon is exfoliated into graphene sheets. The composite materials have a relatively large surface area, a high specific capacity against lithium, and good cycling with lithium metal oxide cathode materials. The composite materials can be effectively formed with a two-step high energy mechanical milling process. In the first milling process, silicon suboxide can be milled to form processed silicon suboxide, which may or may not exhibit crystalline silicon x-ray diffraction. In the second milling step, the processed silicon suboxide is milled with graphitic carbon. Composite materials with a high specific capacity and good cycling can be obtained in particular with balancing of the processing conditions.

Anguchamy, Yogesh Kumar↗
DOE OSTI2024

Critical Assessment of Electronic Structure Descriptors for Predicting Perovskite Catalytic Properties

The discovery and design of materials which can efficiently catalyze the oxygen reduction and evolution reactions at reduced temperatures is important for facilitating the widespread adoption of fuel cell and electrolyzer technologies. Numerous studies have produced correlations between catalytic properties, such as oxygen surface exchange or electrode area specific resistance (ASR), and properties of the catalyst material. However, correlations have historically been limited in scope (e.g., using only a few materials or at a single temperature) and it has been difficult to provide detailed assessments of their robustness. Here, in this study, we assess the ability of the O p-band center electronic structure descriptor, obtained from density functional theory (DFT) calculations, to correlate with oxygen surface exchange rates, diffusivities, and area specific resistances for a large database of perovskite oxide catalytic properties. By data mining the literature, we obtain 747 catalytic property value data points spanning 299 unique perovskite compositions from 313 studies. We assess linear correlations of each property with the O p-band center and find generally modest correlations that are qualitatively useful (prediction mean absolute errors of about 0.5 log units are typical), where the correlations are improved at higher temperatures (e.g., 800 °C vs. 500 °C) and significantly improve when considering fits to the subset of materials which have multiple independent measurements. These findings suggest that the spread of property data is significantly influenced by experimental uncertainty, and subsequent measurements of additional materials will likely improve the O p-band center correlations.

30 DIRECT ENERGY CONVERSION↗
DOE OSTI2024

Phosphorus recycling by mineral-catalyzed ribonucleotide cleavage on iron and manganese oxides

Abstract Phosphorus is an essential element influencing both food security via plant fertilization, and water pollution through excessive phosphorus use, yet the phosphorus cycle in ecosystems is poorly known. In particular, beyond adsorption, the role of iron and manganese oxides in catalyzing the abiotic dephosphorylation of biomolecules is debated. Here, we studied the reactions of ribonucleotides, containing different phosphate bonding, with goethite, hematite, and birnessite. We employed both high-resolution mass spectrometry of solution species and molecular modeling simulations of ribonucleotide-mineral complexes. Results disclose an up to fivefold preferential hydrolytic cleavage of a phosphoanhydride bond over a phosphoester bond, indicating that mineral-catalyzed reactions reflect the hierarchy reported for the activity of phosphatase enzymes. The fourfold higher catalytic reactivity of goethite and birnessite versus hematite is explained by mineral-specific binding rather than surface area differences. Corresponding simulated adsorbate conformations at the water–mineral interfaces are proposed. Overall, our findings provide new insights on the catalytic recycling of organic phosphorus species by mineral oxides.

58 GEOSCIENCES↗
DOE OSTI2020

Mirrors for petawatt lasers: Design principles, limitations, and solutions

High intensity and high energy laser facilities place increasing demands on optical components, requiring large surface area optics with exacting specifications. Petawatt lasers are high energy, short-pulse laser systems generally based on chirped-pulse amplification, where an initial low energy short pulse is stretched, amplified, and then recompressed to produce fs to ps high-power laser pulses. In such petawatt lasers, the highest demands are placed on the final optics, including gratings which compress the pulses and mirrors which direct and focus the final high-power beams. The limiting factor in these optical components is generally laser-induced damage. Designing and fabricating these optical components to meet reflection, dispersion, and other requirements while meeting laser-induced damage requirements is the primary challenge discussed in this tutorial. We will introduce the reader to the technical challenges and tradeoffs required to produce mirrors for petawatt lasers and discuss current research directions.

47 OTHER INSTRUMENTATION↗
DOE OSTI2022

Effects of Carbonic Acid-Rock Interactions on CO2/Brine Multiphase Flow Properties in the Upper Minnelusa Sandstones

Summary Carbon dioxide (CO2) injection into a deep saline aquifer can dissolve into formation brine and generate carbonic acid. The resulting acid can drive fluid-rock geochemical reactions. The impact of these fluid-rock geochemical reactions on porosity, permeability, and multiphase flow responses is relevant to the determination of CO2 storage capacity of deep saline aquifers. In this research, carbonic acid flooding experiments were performed on core samples consisting of poorly sorted, quartz-rich sand with laminated bedding from a possible CO2 storage target in northwest Wyoming. Complementary pre- and post-injection porosity and permeability, thin-section, Brunauer-Emmett-Teller (BET) surface area, mercury intrusion capillary pressure (MICP), and time-domain nuclear magnetic resonance (TD-NMR) measurements were conducted. Overall, both core porosity and permeability increased after a 7-day carbonic acid injection, from 6.2 to 8.4% and 1.6 to 3.7 md, respectively. We attributed these changes to carbonate mineral dissolution, which was evidenced by the effluent brine geochemistry, pore-throat size distribution (PTSD), and BET surface area. To be more specific, within the more-permeable section of core samples containing larger pore size, the permeability increment is apparent due to dolomite mineral grains and cements dissolution. However, for the lower-permeability section corresponding to the smaller pore size, mineral precipitation possibly lessened dissolution effects, leading to insignificant petrophysical properties changes. Consequently, the observed heterogeneous carbonic acid-rock interactions resulted in alterations of CO2/brine relative permeability (i.e., the initial CO2 saturation decreased and the CO2 flow capacity was enhanced). This research provides a fundamental understanding regarding effects of fluid-rock reactions on changes in static and multiphase flow properties of eolian sandstones, which lays the foundation for more accurate prediction/simulation of CO2 injection into deep saline aquifers.

Engineering↗
DOE OSTI2024

Material Discovery and Design Principles of Perovskite Oxides for Reversible Solid Oxide Cells (R-SOC)

Reversible solid oxide cells (R-SOCs) are highly efficient devices for energy conversion and storage, capable of operating for both hydrogen utilization and production. In fuel cell mode, an R-SOC consumes hydrogen or natural gas to generate electricity, while in electrolysis mode, it produces hydrogen from steam. The discover of new materials with rapid oxygen surface exchange kinetics and enduring stability is crucial for the economically viable commercialization of R-SOCs. To facilitate this pursuit, we conducted extensive Density Functional Theory (DFT) calculations and developed Machine Learning (ML) models to predict critical catalytic properties essential for R-SOCs, such as oxygen surface exchange/diffusivity, and area-specific resistance (ASR). BaCoxFeyZrzO3-d(BFCZ)(x+y+z=1) emerged as a promising family of electrode materials with high activity and stability, validated through systematic experimental study. Moreover, a robust numerical multiphysics model was developed to optimize materials and microstructure parameters, providing the ability to predict the performance of functional R-SOCs.

Liu, Jian↗
DOE OSTI2021

Synthesis of new two-dimensional titanium carbonitride Ti 2 C 0.5 N 0.5 T x MXene and its performance as an electrode material for sodium-ion battery

Two-dimensional (2D) layered transition metal carbides/nitrides, called MXenes, are attractive alternative electrode materials for electrochemical energy storage. Owing to their metallic electrical conductivity and low ion diffusion barrier, MXenes are promising anode materials for sodium-ion batteries (SIBs). Herein, we report on a new 2D carbonitride MXene, viz ., Ti 2 C 0.5 N 0.5 T x (T x stands for surface terminations), and the only second carbonitride after Ti 3 CNT x so far. A new type of in situ HF (HCl/KF) etching condition was employed to synthesize multilayer Ti 2 C 0.5 N 0.5 T x powders from Ti 2 AlC 0.5 N 0.5 . Spontaneous intercalation of tetramethylammonium followed by sonication in water allowed for large-scale delamination of this new titanium carbonitride into 2D sheets. Multilayer Ti 2 C 0.5 N 0.5 T x powders showed higher specific capacities and larger electroactive surface area than those of Ti 2 CT x powders. Multilayer Ti 2 C 0.5 N 0.5 T x powders show a specific capacity of 182 mAh g -1 at 20 mA g -1 , the highest among all reported MXene electrodes as SIBs with excellent cycling stability.

25 ENERGY STORAGE↗
DOE OSTI2026

Xanthos-Lake Dataset

The Xanthos-Lake v1.0 dataset provides the input data, trained machine-learning models, and simulation outputs needed to characterize lake water balance, snow and ice conditions, and mixing-layer temperature within the Xanthos global hydrological modeling framework. The dataset supports lake representation across a wide range of lake sizes and hydroclimatic conditions by combining xLSIM, a basin-specific machine-learning emulator of lake snow, ice, ice-cover fraction, and mixing-layer temperature, with the Xanthos-Lake water-balance model. The archive contains NetCDF datasets used to train and evaluate xLSIM, trained model weights, processed meteorological and lake-property inputs, and basin- and lake-category-specific simulation outputs. These materials are organized into four primary data groups, described below. Snowice_model_inputs: Contains the NetCDF input data used to train xLSIM. The xLSIM machine-learning framework uses three lake-based datasets. The meteorological forcing dataset provides monthly relative humidity, specific humidity, surface wind speed, maximum and minimum air temperature, downward longwave and shortwave radiation, snowfall, surface air pressure, and total precipitation. Lake surface area is included as an additional static predictor. The target-state dataset provides lake ice thickness, snow depth, snow cover, and lake mixing-layer temperature, while a companion lake-surface dataset provides the lake ice-cover fraction. Before training, ice thickness and snow depth are converted from meters to centimeters, mixing-layer temperature is converted from kelvin to degrees Celsius and constrained to nonnegative values, and ice-cover fraction is converted from a fraction to a percentage. The predictor variables are normalized using statistics calculated across the selected lakes and time steps. Snowice_model_outputs: Contains the NetCDF outputs generated by xLSIM. For each basin, xLSIM produces a file containing observed and predicted lake-state variables for the training, validation, and testing periods. The modeled variables include lake ice thickness, snow depth, snow cover, mixing-layer temperature, and lake ice-cover fraction. For basins without a sufficiently persistent snow-and-ice signal, the emulator predicts only mixing-layer temperature. The outputs also include training and validation loss histories, the selected model configuration, identifiers of the lakes used in training, and SHAP-based feature-importance information at the global, lake, and seasonal-regime levels. The trained machine-learning model weights are provided separately within the dataset archive. Together, these files support model evaluation and subsequent coupling with the Xanthos-Lake water-balance framework. XanthosLAKES: Contains the NetCDF input data used by the Xanthos-Lake framework. Monthly meteorological inputs include relative and specific humidity, downward shortwave and longwave radiation, mean, maximum, and minimum air temperature, wind speed, precipitation, snowfall, and surface air pressure. Static lake-property datasets provide lake identifiers, geographic locations, surface area, volume, mean depth, elevation, drainage area, fetch, outlet-routing information, and associated Xanthos grid-cell attributes. Separate bathymetric datasets provide the coefficients of the area–depth and volume–depth relationships for each aggregated lake unit. GLEV-based records provide observed lake surface area and evaporation data used to initialize lake states, define reference conditions, and calibrate and evaluate the model. Xanthos-Lake Outputs: Contains the basin- and lake-category-specific NetCDF outputs generated by Xanthos-Lake. Monthly variables include lake surface area, storage volume, outlet discharge, evaporation rate, evaporation volume, lake–groundwater exchange, lake inflow, ice thickness, snow depth, snow-cover fraction, ice-cover fraction, and mixing-layer temperature. The files also contain lake-specific calibration and validation statistics, including normalized root-mean-square error, mean absolute error, Nash–Sutcliffe efficiency, Kling–Gupta efficiency, and percent bias. Stored calibrated and derived parameters include the weir discharge coefficient, fractional freeboard, groundwater exchange coefficient, reference water level, corresponding reference surface area and storage volume, weir-width adjustment factor, and the fraction of routed inflow entering the lake. Basin identifiers, lake category, simulation period, calibration and validation periods, and parameter-schema information are retained as NetCDF metadata.

Abeshu, Guta [Pacific Northwest National Laborator↗
DOE OSTI2021

Efficient Hydrogen Delivery for Microbial Electrosynthesis via 3D-Printed Cathodes

The efficient delivery of electrochemically in situ produced H 2 can be a key advantage of microbial electrosynthesis over traditional gas fermentation. However, the technical details of how to supply large amounts of electric current per volume in a biocompatible manner remain unresolved. Here, we explored for the first time the flexibility of complex 3D-printed custom electrodes to fine tune H 2 delivery during microbial electrosynthesis. Using a model system for H 2 -mediated electromethanogenesis comprised of 3D fabricated carbon aerogel cathodes plated with nickel-molybdenum and Methanococcus maripaludis, we showed that novel 3D-printed cathodes facilitated sustained and efficient electromethanogenesis from electricity and CO 2 at an unprecedented volumetric production rate of 2.2 L CH4 /L catholyte /day and at a coulombic efficiency of 99%. Importantly, our experiments revealed that the efficiency of this process strongly depends on the current density. At identical total current supplied, larger surface area cathodes enabled higher methane production and minimized escape of H 2 . Specifically, low current density (<1 mA/cm 2 ) enabled by high surface area cathodes was found to be critical for fast start-up times of the microbial culture, stable steady state performance, and high coulombic efficiencies. Our data demonstrate that 3D-printing of electrodes presents a promising design tool to mitigate effects of bubble formation and local pH gradients within the boundary layer and, thus, resolve key critical limitations for in situ electron delivery in microbial electrosynthesis.

03 NATURAL GAS↗
DOE OSTI2022

Tuning Surface Acidity of Mixed Conducting Electrodes: Recovery of Si‐Induced Degradation of Oxygen Exchange Rate and Area Specific Resistance

Abstract Metal oxides are an important class of functional materials, and for many applications, ranging from solid oxide fuel/electrolysis cells, oxygen permeation membranes, and oxygen storage materials to gas sensors (semiconducting and electrolytic) and catalysts, the interaction between the surface and oxygen in the gas phase is central. Ubiquitous Si‐impurities are known to impede this interaction, commonly attributed to the formation of glassy blocking layers on the surface. Here, the surface oxygen exchange coefficient ( k chem ) is examined for Pr 0.1 Ce 0.9 O 2‐δ (PCO), a model mixed ionic electronic conductor, via electrical conductivity relaxation measurements, and the area‐specific resistance (ASR) by electrochemical impedance spectroscopy. It is demonstrated that even low silica levels, introduced by infiltration, depress k chem by a factor 4000, while the ASR increases 40‐fold and we attribute this to its acidity relative to that of PCO. The ability to fully regenerate the poisoned surface by the subsequent addition of basic Ca‐ or Li‐species is further shown. This ability to not only recover Si‐poisoned surfaces by tuning the relative surface acidity of an oxide surface, but subsequently outperform the pre‐poisoned response, promises to extend the operating life of materials and devices for which the catalytic oxygen/solid interface reaction is central.

30 DIRECT ENERGY CONVERSION↗
DOE OSTI2025

Site-specific surface reactivity on SnO 2 : Evaluating selective atomic layer deposition processes

Area selective atomic layer deposition (AS-ALD) is a bottom-up synthesis approach with potential for deposition with molecular level precision. Here, the site-specific hydration of metal oxide substrates, combined with surface H 2 O-selective ALD processes, provides a potentially powerful path to targeted synthesis. Density functional theory (DFT) calculations are used to predict the thermodynamics of ALD precursor reactivity and hydration for (001), (101), (110), and (100) rutile SnO 2 facets as a function of temperature. Trimethylaluminum (TMA) and dimethyl aluminum isopropoxide (DMAI) dimers are predicted to react with both dehydrated and hydrated SnO 2 (001), (101), and (110) facets at ALD-relevant temperatures, while the SnO 2 (100) facet is predicted to be uniquely unreactive with TMA and DMAI monomers as well as dehydrate near 177 °C making this facet more amenable to targeted ALD. In situ ellipsometric studies of Al 2 O 3 ALD on polycrystalline SnO 2 at 150 °C are consistent with the computational predictions of rapid and unselective nucleation, in stark contrast to inhibited and selective ALD on isostructural rutile TiO 2 .

Atomic Layer Deposition↗
DOE OSTI2020

Establishing a Theoretical Landscape for Identifying Basal Plane Active 2D Metal Borides (MBenes) toward Nitrogen Electroreduction

Abstract To achieve efficient ammonia synthesis via electrochemical nitrogen reduction reaction (NRR), a qualified catalyst should have both high specific activity and large active surface area. However, integrating these two merits into one single material remains a big challenge due to the difficulty in balancing multiple reaction intermediates. Here, it is demonstrated that the boron‐analogues of MXenes, namely “MBenes”, could cope with the challenge and achieve the high activity and large reaction region simultaneously toward NRR. Using extensive density functional theory computations and taking 16 MBenes as representatives, it is identified that seven MBenes (CrB, MoB, WB, Mo 2 B, V 3 B 4 , CrMnB 2 , and CrFeB 2 ) not only have intrinsic basal plane activity for NRR with limiting potentials ranging from −0.22 to −0.82 V, but also possess superior capability of suppressing the competitive hydrogen evolution reaction. Particularly, different from the MXenes whose surface oxidation may block the active sites, once oxidized, these MBenes can catalyze NRR via the self‐activating process, reducing O*/OH* into H 2 O* under reaction conditions, and favoring the N 2 electroreduction. As a result, the exceptional activity and selectivity, high active area (≈10 19 m −2 ), and antioxidation nature render these MBenes as pH‐universal catalysts for NH 3 production without introducing any dopants and defects.

Guo, Xiangyu↗
DOE OSTI2024

Machine Learning Design of Perovskite Catalytic Properties

Abstract Discovering new materials that efficiently catalyze the oxygen reduction and evolution reactions is critical for facilitating the widespread adoption of solid oxide fuel cell and electrolyzer (SOFC/SOEC) technologies. Here, machine learning (ML) models are developed to predict perovskite catalytic properties critical for SOFC/SOEC applications, including oxygen surface exchange, oxygen diffusivity, and area specific resistance (ASR). The models are based on trivial‐to‐calculate elemental features and are more accurate and dramatically faster than the best models based on ab initio‐derived features, potentially eliminating the need for ab initio calculations in descriptor‐based screening. The model of ASR enables temperature‐dependent predictions, has well calibrated uncertainty estimates and online accessibility. Use of temporal cross‐validation reveals the model to be effective at discovering new promising materials prior to their initial discovery, demonstrating the model can make meaningful predictions. Using the SHapley Additive ExPlanations (SHAP) approach, detailed discussion of different approaches of model featurization is provided for ML property prediction. Finally, the model is used to screen more than 19 million perovskites to develop a list of promising cheap, earth‐abundant, stable, and high performing materials, and find some top materials contain mixtures of less‐explored elements (e.g., K, Bi, Y, Ni, Cu) worth exploring in more detail.

25 ENERGY STORAGE↗
DOE OSTI2020

Heat dissipation systems with hygroscopic working fluid

A heat dissipation system apparatus and method of operation using hygroscopic working fluid for use in a wide variety of environments for absorbed water in the hygroscopic working fluid to be released to minimize water consumption in the heat dissipation system apparatus for effective cooling in environments having little available water for use in cooling systems. The system comprises a low-volatility, hygroscopic working fluid to reject thermal energy directly to ambient air. The low-volatility and hygroscopic nature of the working fluid prevents complete evaporation of the fluid and a net consumption of water for cooling, and direct-contact heat exchange allows for the creation of large interfacial surface areas for effective heat transfer. Specific methods of operation prevent the crystallization of the desiccant from the hygrosopic working fluid under various environmental conditions.

42 ENGINEERING↗
DOE OSTI2023

Heat dissipation systems with hygroscopic working fluid

A heat dissipation system apparatus and method of operation using hygroscopic working fluid for use in a wide variety of environments for absorbed water in the hygroscopic working fluid to be released to minimize water consumption in the heat dissipation system apparatus for effective cooling in environments having little available water for use in cooling systems. The system comprises a low-volatility, hygroscopic working fluid to reject thermal energy directly to ambient air. The low-volatility and hygroscopic nature of the working fluid prevents complete evaporation of the fluid and a net consumption of water for cooling, and direct-contact heat exchange allows for the creation of large interfacial surface areas for effective heat transfer. Specific methods of operation prevent the crystallization of the desiccant from the hygrosopic working fluid under various environmental conditions.

Martin, Christopher L.↗