Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “hydrostaticity”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 217 records · Page 12
All sourcesNASA NTRSDOE OSTI
DOE OSTI2023

Tuning the band topology of GdSb by epitaxial strain

Rare-earth monopnictide (RE-V) semimetal crystals subjected to hydrostatic pressure have shown interesting trends in magnetoresistance, magnetic ordering, and superconductivity, with theory predicting pressure-induced band inversion. Yet, thus far, there have been no direct experimental reports of interchanged band order in RE-Vs due to strain. This work studies the evolution of band topology in biaxially strained GdSb(001) epitaxial films using angle-resolved photoemission spectroscopy (ARPES) and density functional theory (DFT). As biaxial strain is tuned from tensile to compressive strain, the gap between the hole and the electron bands dispersed along [001] decreases. The conduction and valence band shifts seen in DFT and ARPES measurements are explained by a tight-binding model that accounts for the orbital symmetry of each band. Finally, we discuss the effect of biaxial strain on carrier compensation and magnetic ordering temperature.

36 MATERIALS SCIENCE↗
DOE OSTI2023

Mesoscopic two-point collective dynamics of glass-forming liquids

The collective density–density and hydrostatic pressure–pressure correlations of glass-forming liquids are spatiotemporally mapped out using molecular dynamics simulations. It is shown that the sharp rise of structural relaxation time below the Arrhenius temperature coincides with the emergence of slow, nonhydrodynamic collective dynamics on mesoscopic scales. The observed long-range, nonhydrodynamic mode is independent of wave numbers and closely coupled to the local structural dynamics. Below the Arrhenius temperature, it dominates the slow collective dynamics on length scales immediately beyond the first structural peak in contrast to the well-known behavior at high temperatures. Furthermore, these results highlight a key connection between the qualitative change in mesoscopic two-point collective dynamics and the dynamic crossover phenomenon.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2024

A miniature multi-anvil apparatus using diamond as anvils—MDAC: Multi-axis diamond anvil cell

The diamond anvil cell (DAC) has been widely used in high-pressure research. Despite significant progress over the past five decades, the opposed anvil geometry in the DAC inevitably leads to a disk-shaped sample configuration at high pressure. This intrinsic limitation is largely responsible for the large pressure and temperature gradients in the DAC, which often compromise precise experiments and their characterizations. Here, we designed and fabricated a multi-axis diamond anvil cell (MDAC) by adopting the concept of a multi-anvil apparatus but using single crystal diamonds as the anvil material. Preliminary data show that the MDAC can generate extreme pressure conditions above 100 GPa. The advantages of the MDAC over a traditional opposed anvil DAC include thicker, voluminous samples, quasi-hydrostatic, or designed deviatoric stress conditions, and multidirectional access windows for optical applications and x-ray probes. In this article, we present the design and performance of a prototype MDAC, as well as the application prospects in high-pressure research.

47 OTHER INSTRUMENTATION↗
DOE OSTI2025

High pressure structural and lattice dynamics study of α-In2Se3

Layered α-In2Se3 has been studied using a combined in situ synchrotron angle-dispersive powder x-ray diffraction and Raman spectroscopy study in a diamond anvil cell up to 60+ GPa, at room temperature. Helium, which remains fairly hydrostatic up to the highest pressure in this study, was used as the pressure-transmitting medium. The results from both experimental methods reveal a pressure-induced structural phase transition from α-In2Se3 to a monoclinic β'-In2Se3 structure at ≈1 GPa, in agreement with previous studies. Based on our detailed measurements using both experimental techniques and the F-f formalism, the β'-In2Se3 structure remains stable up to 45 GPa, without a clear indication of a phase transition toward the previously reported β-In2Se3 phase. Above this pressure, In2Se3 adopts a disordered solid-solution-like orthorhombic structure, phase IV. The results are discussed in comparison with the relevant previous studies of α-In2Se3 under pressure.

Feng, Shiyu↗
DOE OSTI2026

Mott vs Kondo: Influence of various density functional based methods on the Ce isostructural phase transition mechanism

The cerium iso-structural phase transition (γ–α) is dominated by f-electron localization changes that results in a magnetic ordering change and a volume collapse. Generally, these physics are difficult to capture with ab initio and first principles methods. However, previous works have shown various methods to be successful in predicting at least some of the physics of the γ to α phase transition. Therefore, here, we perform a broad survey of density functional based methods across three levels of theory and types of functions [GGA (generalized gradient approximation), MetaGGA, and hybrid functionals] and compare the results, focusing on hydrostatic compression across the phase boundary at zero kelvin. For the methods that best reproduce experimental results, we directly probe the predicted mechanisms and frame the results in the Mott/Kondo debate, assessing how the underlying methods and assumptions of different functionals can assess the physical drivers in the phase transition, providing insight into the governing processes of this unique phase transition.

36 MATERIALS SCIENCE↗
DOE OSTI2020

Electronically driven collapse of the bulk modulus in δ -plutonium

Plutonium metal exhibits an anomalously large softening of its bulk modulus at elevated temperatures that is made all the more extraordinary by the finding that it occurs irrespective of whether the thermal expansion coefficient is positive, negative, or zero—representing an extreme departure from conventional Grüneisen scaling. We show here that the cause of this softening is the compressibility of plutonium’s thermally excited electronic configurations, which has thus far not been considered in thermodynamic models. We show that when compressible electronic configurations are thermally activated, they invariably give rise to a softening of the bulk modulus regardless of the sign of their contribution to the thermal expansion. The electronically driven softening of the bulk modulus is shown to be in good agreement with elastic moduli measurements performed on the gallium-stabilized δ phase of plutonium over a range of temperatures and compositions and is shown to grow rapidly at small concentrations of gallium and at high temperatures, where it becomes extremely sensitive to hydrostatic pressure.

36 MATERIALS SCIENCE↗
DOE OSTI2025

High pressure Raman spectroscopy of boron-rich boron carbides up to 50 GPa

We investigated the effects of increased boron content on the resistance to non-hydrostatic stress-induced (NHSI) local amorphous zones in boron-rich boron carbide (BxC) compounds. Using high-pressure Raman spectroscopy, we subjected B 4.3 C, B 6.4 C, and B 10.4 C to pressures up to 50 GPa and monitored their responses. Our results show that higher boron content delays the onset of NHSI local amorphous zone formation, shifting it from 35 GPa in B 4.3 C to approximately 50 GPa in B 10.4 C. This enhanced resistance is attributed to a reduction in the formation of the B 12 (CCC) polytype, which is susceptible to amorphization, and the greater flexibility of B–B–B chains. Furthermore, alternative mechanisms, such as boron vacancy-driven C–C bond formation, provide additional insights into defect-mediated structural changes that may influence the amorphization process. In conclusion, these findings highlight the dual role of boron content and defect mechanisms in improving the structural stability of B x C materials under extreme environments.

36 MATERIALS SCIENCE↗
DOE OSTI2021

A strategy to identify materials exhibiting a large nonlinear phononics response: tuning the ultrafast structural response of LaAlO 3 with pressure

We use theory and first-principles calculations to investigate how structural changes induced by ultrafast optical excitation of infrared-active phonons change with hydrostatic pressure in LaAlO 3 . Our calculations show that the observed structural changes are sensitive to pressure, with the largest changes occurring at pressures near the boundary between the cubic perovskite and rhombohedral phases. We rationalize our findings by defining a figure of merit that depends only on intrinsic materials quantities, and show that the peak response near the phase boundary is dictated by different microscopic materials properties depending on the particular phonon mode being excited. Our work demonstrates how it is possible to systematically identify materials that may exhibit particularly large changes in structure and properties due to optical excitation of infrared-active phonons.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗
DOE OSTI2022

First-principles calculation of gate-tunable ferromagnetism in magic-angle twisted bilayer graphene under pressure

Magic-angle twisted bilayer graphene (MATBG) is notable as a highly tunable platform for investigating strongly correlated phenomena such as unconventional superconductivity and quantum spin liquids, due to easy control of doping level through gating and sensitive dependence of the magic angle on hydrostatic pressure. Experimental observations of correlated insulating states, unconventional superconductivity and ferromagnetism in MATBG indicate that this system exhibits rich exotic phases. In this work, using density functional theory calculations in conjunction with the effective screening medium method, we find the MATBG under pressure at a twisting angle of 2.88 °and simulate how its electronic states evolve when doping level and electric field perpendicular to plane are tuned by gating. Our calculations show that, at doping levels between two electrons and four holes per moiré unit cell, a ferromagnetic (FM) solution with spin density localized at AA stacking sites is lower in energy than the nonmagnetic solution. The magnetic moment of this FM state decreases with both electron and hole doping and vanishes at four electrons/holes doped per moiré unit cell. Hybridization between the flat bands at the Fermi level and the surrounding dispersive bands can take place at finite doping. On increasing the out-of-plane electric field at zero doping, a transition from the FM state to the nonmagnetic one is seen. An investigation of impurity effects shows that both absorption of O 2 molecules and occurrence of Stone–Wales impurities suppress the FM state, and the mechanisms are understood from our calculations. We also analyze the interlayer bonding character due to flat bands via Wannier functions. Finally, we report trivial band topology of the flat bands in the FM state at a certain doping level.

Physics↗
DOE OSTI2022

Pressure effect on magnetism and valence in ferromagnetic superconductor Eu(Fe 0.75 Ru 0.25 ) 2 As 2

Eu(Fe 0.75 Ru 0.25 ) 2 As 2 is an intriguing system with unusual coexistence of superconductivity and ferromagnetism, providing a unique platform to study the nature of such coexistence. To establish a magnetic phase diagram, time-domain synchrotron Mössbauer experiments in 151 Eu have been performed on a single crystalline Eu(Fe 0.75 Ru 0.25 ) 2 As 2 sample under hydrostatic pressures and at low temperatures. Upon compression the magnetic ordering temperature increases sharply from 20 K at ambient pressure, reaching ~49 K at 10.1GPa. With further compression, the magnetic order is suppressed and eventually collapses. Isomer shift values from Mössbauer measurements and x-ray absorption spectroscopy data at Eu L 3 edge show that pressure drives Eu ions to a homogeneous intermediate valence state with mean valence of ~2.4 at 27.4 GPa, possibly responsible for the suppression of magnetism. Synchrotron powder x-ray diffraction experiment reveals a tetragonal to collapsed-tetragonal structural transition around 5 GPa, a lower transition pressure than in the parent compound. Furthermore, these results provide guidance to further work investigating the interplay of superconductivity and magnetism.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗
DOE OSTI2023

Electronic, magnetic, and structural properties of NiFeMnAl

Abstract Half-metallic Heusler compounds have been extensively studied in the recent years, both experimentally and theoretically, for potential applications in spin-based electronics. Here, we present the results of a combined theoretical and experimental study of the quaternary Heusler compound NiFeMnAl. Our calculations indicate that this material is half-metallic in the ground state and maintains its half-metallic electronic structure under a considerable range of external hydrostatic pressure and biaxial strain. NiFeMnAl crystallizes in the regular cubic Heusler structure, and exhibits ferromagnetic alignment. The practical feasibility of the proposed system is confirmed in the experimental section of this work. More specifically, a bulk ingot of NiFeMnAl was synthesized in A2 type disordered cubic structure using arc melting. It shows a high Curie temperature of about 468 K and a saturation magnetization of 2.3 μ B / f .u . The measured magnetization value is smaller than the one calculated for the ordered structure. This discrepancy is likely due to the A2 type atomic disorder, as demonstrated by our calculations. We hope that the presented results may be useful for researchers working on practical applications of spin-based electronics.

Physics↗
DOE OSTI2020

Tests of Dark MACHOs: lensing, accretion, and glow

Dark matter could take the form of dark massive compact halo objects (dMACHOs); i.e., composite objects that are made up of dark-sector elementary particles, that could have a macroscopic mass from the Planck scale to above the solar mass scale, and that also admit a wide range of energy densities and sizes. Concentrating on the gravitational interaction of dMACHOs with visible matter, we map out the mass-radius parameter space that is consistent with gravitational lensing experiments, as well as anisotropies of the cosmic microwave background (CMB) based on the spherical accretion of matter onto a dMACHO in the hydrostatic approximation. For dMACHOs with a uniform-density mass profile and total mass in the range of ~ 10 -12 - 10 M , we find that a dMACHO could explain 100% of the dark matter if its radius is above ≈ 3 times the Einstein radius of the lensing system. For a larger mass above 10 M , a dMACHO with radius above ~ 1×10 8 cm×(M/100 M ) 9/2 is consistent with CMB observables. For a lighter dMACHO with mass below ~ 10 -12 M , there still is not a good experimental probe. Finally, we point out that heavier dMACHOs with masses ~ 0.1 M may be observed by X-ray and optical telescopes if they reside at rest in a large molecular cloud, nearby to our solar system, and accrete ordinary matter to emit photons.

79 ASTRONOMY AND ASTROPHYSICS↗
DOE OSTI2022

A density-wave-like transition in the polycrystalline V 3 Sb 2 sample with bilayer kagome lattice

Recently, transition-metal-based kagome metals have aroused much research interest as a novel platform to explore exotic topological quantum phenomena. Here we report on the synthesis, structure, and physical properties of a bilayer kagome lattice compound V 3 Sb 2 . The polycrystalline V 3 Sb 2 samples were synthesized by conventional solid-state-reaction method in a sealed quartz tube at temperatures below 850 °C. Measurements of magnetic susceptibility and resistivity revealed consistently a density-wave-like transition at T dw ≈ 160 K with a large thermal hysteresis, even though some sample-dependent behaviors were observed presumably due to the different preparation conditions. Upon cooling through T dw , no strong anomaly in lattice parameters and no indication of symmetry lowering were detected in powder x-ray diffraction measurements. This transition can be suppressed completely by applying hydrostatic pressures of about 1.8 GPa, around which no sign of superconductivity was observed down to 1.5 K. Specific-heat measurements revealed a relatively large Sommerfeld coefficient γ = 18.5 mJ∙mol –1 ∙K –2 , confirming the metallic ground state with moderate electronic correlations. Density functional theory calculations indicate that V 3 Sb 2 shows a non-trivial topological crystalline property. Furthermore, our study makes V 3 Sb 2 a new candidate of metallic kagome compound to study the interplay between density-wave-order, nontrivial band topology, and possible superconductivity.

36 MATERIALS SCIENCE↗
DOE OSTI2023

Enhancement of superconductivity at a quantum critical point in (Ca x Sr 1- x ) 3 Rh 4 Sn 13

We report microscopic studies by muon spin spectroscopy of the superconducting properties as a function of chemical and hydrostatic pressure in the cubic ternary intermetallic (Ca x Sr 1-x ) 3 Rh 4 Sn 13 compounds. We find evidence of a quantum critical point at a critical pressure pc in the superconducting phase, where the superfluid density increases by a factor of two and the superconducting pairing strength displays a pronounced maximum. The enhancement of superconductivity is related to the structural phase transition at p c , which is accompanied by profound changes of the Fermi surface associated to the suppression of a charge density wave (CDW). The quantum critical point separates a superconducting phase coexisting with CDW from a pure superconducting phase, while in both phases superconductivity has a strong-coupling phonon-mediated BCS-like s-wave character. Together with the related isoelectronic compound (Ca x Sr 1-x ) 3 Ir 4 Sn 13 , this system shows that conventional BCS superconductors in the presence of competing orders may display behaviour and characteristics of unconventional superconductors.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗
DOE OSTI2021

Theoretical and experimental studies of compression and shear deformation behavior of Osmium to 280 GPa

Abstract The compression behavior of osmium metal was investigated up to 280 GPa (volume compression V/V o = 0.725) under nonhydrostatic conditions at ambient temperature using angle dispersive axial x-ray diffraction (A-XRD) with a diamond anvil cell (DAC). In addition, shear strength of osmium was measured to 170 GPa using radial x-ray diffraction (R-XRD) technique in DAC. Both diffraction techniques in DAC employed platinum as an internal pressure standard. Density functional theory (DFT) calculations were also performed, and the computed lattice parameters and volumes under compression are in good agreement with the experiments. DFT predicts a monotonous increase in axial ratio ( c/a ) with pressure and the structural anomalies of less than 1% in ( c/a ) ratio reported below 150 GPa were not reproduced in theoretical calculations and hydrostatic measurements. The measured value of shear strength of osmium ( τ ) approaches a limiting value of 6 GPa above a pressure of 50 GPa in contrast to theoretical predictions of 24 GPa and is likely due to imperfections in polycrystalline samples. DFT calculations also enable the studies of shear and tensile deformations. The theoretical ideal shear stress is found along the (001)[1–10] shear direction with the maximal shear stress ∼24 GPa at critical strain ∼0.13.

Lin, Chia-Min↗
DOE OSTI2020

Including massive neutrinos in thermal Sunyaev Zeldovich power spectrum and cluster counts analyses

We consistently include the effect of massive neutrinos in the thermal Sunyaev Zeldovich (SZ) power spectrum and cluster counts analyses, highlighting subtle dependencies on the total neutrino mass and data combination. In particular, we find that using the transfer functions for cold dark matter (CDM) + baryons in the computation of the halo mass function, instead of the transfer functions including neutrino perturbations, as prescribed in recent work, yields an ≈0.25 percent downward shift of the σ 8 constraint from tSZ power spectrum data, with a fiducial neutrino mass Σm ν = 0.06 eV. In ΛCDM, with an X-ray mass bias corresponding to the expected hydrostatic mass bias, i.e. (1 - b) ≃ 0.8, our constraints from Planck SZ data are consistent with the latest results from SPT, DES-Y1, and KiDS+VIKING-450. In νΛCDM, our joint analyses of Planck SZ with Planck 2015 primary CMB yield a small improvement on the total neutrino mass bound compared to the Planck 2015 primary CMB constraint, as well as (1 - b) = 0.64 ± 0.04 (68 percent CL). For forecasts, we find that competitive neutrino mass measurements using cosmic variance limited SZ power spectrum require masking the heaviest clusters and probing the small-scale SZ power spectrum up to ℓ max ≈ 10 4 . Although this is challenging, we find that SZ power spectrum can realistically be used to tightly constrain intracluster medium properties: we forecast a 2 percent determination of the X-ray mass bias by combining CMB-S4 and our mock SZ power spectrum with ℓ max = 10 3 .

Astronomy & Astrophysics↗
DOE OSTI2020

Physical effects on compact high-velocity clouds in the circumgalactic medium

ABSTRACT We numerically investigate the evolution of compact high-velocity clouds (CHVCs) passing through a hot, tenuous gas representing the highly ionized circumgalactic medium (CGM) by applying the adaptive-mesh refinement code flash. The model clouds start from both hydrostatic and thermal equilibrium and are in pressure balance with the CGM. Here, we present 14 models, divided into two mass categories and two metallicities each and different velocities. We allow for self-gravity and thermal conduction or not. All models experience mass diffusion, radiative cooling, and external heating leading to dissociation and ionization. Our main findings are (1) self-gravity stabilizes clouds against Rayleigh–Taylor instability, which is disrupted within 10 sound-crossing times without; (2) clouds can develop Jeans-instable regions internally even though they are initially below Jeans mass; (3) all clouds lose mass by ram pressure and Kelvin–Helmholtz instability; (4) thermal conduction substantially lowers mass-loss rates, by this, extending the clouds’ lifetimes, particularly, more than doubling the lifetime of low-mass clouds; (5) thermal conduction leads to continuous, filamentary stripping, while the removed gas is heated up quickly and mixes efficiently with the ambient CGM; (6) without thermal conduction the removed gas consists of dense, cool, clumpy fragments; (7) thermal conduction might prevent CHVCs from forming stars; and (8) clouds decelerated by means of drag from the ambient CGM form head-tail shapes and collapse after they reach velocities characteristic for intermediate-velocity clouds. Conclusively, only sophisticated modelling of CHVCs as non-homogeneous and non-isothermal clouds with thermal conduction and self-gravity explains observed morphologies and naturally leads to the suppression of star formation.

Sander, Bastian↗
DOE OSTI2022

The effect of saturated thermal conduction on clouds in a hot plasma

We numerically investigate the internal evolution of multiphase clouds, which are at rest with respect to an ambient, highly ionized medium (HIM) representing the hot component of the circumgalactic medium. Time-dependent saturated thermal conduction and its implications like condensation rates and mixing efficiency are assessed in multiphase clouds. Our simulations are carried out by using the adaptive mesh refinement code FLASH. The model clouds are initially in both hydrostatic and thermal equilibrium and are in pressure balance with the HIM. Thus, they have steep gradients in both temperature and density at the interface to HIM leading to non-negligible thermal conduction. Several physical processes are considered numerically or semi-analytically: thermal conduction, radiative cooling and external heating of gas, self-gravity, mass diffusion, and dissociation of molecules and ionization of atoms. It turns out that saturated thermal conduction triggers a continuous condensation irrespective of cloud mass. Dynamical interactions with ambient HIM all relate to the radial density gradient in the clouds: (1) mass flux due to condensation is the higher the more homogeneous the clouds are; (2) mixing of condensed gas with cloud gas is easier in low-mass clouds, because of their shallower radial density gradient; and thus (3) accreted gas is distributed more efficiently. A distinct and sub-structured transition zone forms at the interface between cloud and HIM, which starts at smaller radii and is much narrower as deduced from analytical theory.

79 ASTRONOMY AND ASTROPHYSICS↗