Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “OSCILLATOR STRENGTHS”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 217 records · Page 12
All sourcesNASA NTRSDOE OSTI
DOE OSTI2023

Construction of deep-learning based WWBs parameterization for ENSO prediction

Westerly wind bursts (WWBs) significantly impact the occurrence and development of the El Niño-Southern Oscillation (ENSO). Current dynamical models, however, face significant challenges in representing WWBs. In this study, deep learning techniques were used to develop a new parameterization scheme for WWBs and further compared against two widely used schemes. Further, the results show that the scheme developed in this study has greater capability than previous schemes in reproducing WWBs characteristics, particularly in terms of occurrence probability, location, and duration. This improvement was mainly reflected in El Niño years, especially in strong events when the deep-learning-based scheme much realistically captures the location and strength of WWBs. It is expected that the new parameterization scheme will further improve ENSO prediction in dynamical models.

54 ENVIRONMENTAL SCIENCES↗
DOE OSTI2021

Campbell penetration depth in low carrier density superconductor YPtBi

Magnetic penetration depth, λ m , was measured as a function of temperature and magnetic field in single crystals of low carrier density superconductor YPtBi by using a tunnel-diode oscillator technique. Measurements in zero DC magnetic field yield London penetration depth, λ L ( T ) , but in the applied field the signal includes the Campbell penetration depth, λ C ( T ) , which is the characteristic length of the attenuation of small excitation field, H AC , into the Abrikosov vortex lattice due to its elasticity. Whereas the magnetic field dependent λ C exhibit λ C ~ B p with p = 1 / 2 in most of the conventional and unconventional superconductors, we found that p ≈ 0.23 << 1 / 2 in YPtBi due to rapid suppression of the pinning strength. From the measured λ C ( T , H ) , the critical current density is j c ≈ 40 A / cm 2 at 75 mK. We find that this is orders of magnitude lower than that of conventional superconductors of comparable T c .

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗
DOE OSTI2025

Applicability of semiclassical theories in the strong-field plasma regime

For many purposes, classical plasma dynamics models can work surprisingly well, even for strong electromagnetic fields, approaching the Schwinger critical fields, and high frequencies, approaching the Compton frequency. However, the applicability of classical models tends to depend rather sensitively on the details of the problem. In the present paper, we study the specific case of plasma oscillations to draw a line between the classical and quantum relativistic regimes. Here, due to the field geometry of study, mechanisms like radiation reaction and Breit-Wheeler pair production, which tend to be important for electromagnetic fields, are rather effectively suppressed. Moreover, we find that the polarization current due to the electron spin is generally negligible for frequencies below the Compton frequency, compared with the free current, whose magnitude is well-approximated by the classical Vlasov theory. However, we show that pair creation due to the Schwinger mechanism can sometimes be important for surprisingly modest field strengths, of the order of 10% of the critical field or even smaller. A rough guideline for when the classical Vlasov theory can be applied is given.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗
DOE OSTI2024

Systematic and objective evaluation of Earth system models: PCMDI Metrics Package (PMP) version 3

Systematic, routine, and comprehensive evaluation of Earth system models (ESMs) facilitates benchmarking improvement across model generations and identifying the strengths and weaknesses of different model configurations. By gauging the consistency between models and observations, this endeavor is becoming increasingly necessary to objectively synthesize the thousands of simulations contributed to the Coupled Model Intercomparison Project (CMIP) to date. The Program for Climate Model Diagnosis and Intercomparison (PCMDI) Metrics Package (PMP) is an open-source Python software package that provides quick-look objective comparisons of ESMs with one another and with observations. The comparisons include metrics of large- to global-scale climatologies, tropical inter-annual and intra-seasonal variability modes such as the El Niño–Southern Oscillation (ENSO) and Madden–Julian Oscillation (MJO), extratropical modes of variability, regional monsoons, cloud radiative feedbacks, and high-frequency characteristics of simulated precipitation, including its extremes. The PMP comparison results are produced using all model simulations contributed to CMIP6 and earlier CMIP phases. An important objective of the PMP is to document the performance of ESMs participating in the recent phases of CMIP, together with providing version-controlled information for all datasets, software packages, and analysis codes being used in the evaluation process. Among other purposes, this also enables modeling groups to assess performance changes during the ESM development cycle in the context of the error distribution of the multi-model ensemble. Quantitative model evaluation provided by the PMP can assist modelers in their development priorities. In this paper, we provide an overview of the PMP, including its latest capabilities, and discuss its future direction.

54 ENVIRONMENTAL SCIENCES↗
DOE OSTI2021

Motional Squeezing for Trapped Ion Transport and Separation

Transport, separation, and merging of trapped ion crystals are essential operations for most large-scale quantum computing architectures. In this Letter, we develop a theoretical framework that describes the dynamics of ions in time-varying potentials with a motional squeeze operator, followed by a motional displacement operator. Using this framework, we develop a new, general protocol for trapped ion transport, separation, and merging. We show that motional squeezing can prepare an ion wave packet to enable transfer from the ground state of one trapping potential to another. Here, the framework and protocol are applicable if the potential is harmonic over the extent of the ion wave packets at all times. As illustrations, we discuss two specific operations: changing the strength of the confining potential for a single ion and separating same-species ions with their mutual Coulomb force. Both of these operations are, ideally, free of residual motional excitation.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗
DOE OSTI2022

Comparative Analysis of the Near‐ and Far‐Field Optical Response of Thin Plasmonic Nanostructures

Abstract Nanostructures made of metallic materials support collective oscillations of their conduction electrons, commonly known as surface plasmons. These modes, whose characteristics are determined by the material and morphology of the nanostructure, couple strongly to light and confine it into subwavelength volumes. Of particular interest are metallic nanostructures for which the size along one dimension approaches the nanometer or even the subnanometer scale, since such morphologies can lead to stronger light–matter interactions and higher degrees of confinement than regular three‐dimensional nanostructures. Here, the plasmonic response of metallic nanodisks of varying thicknesses and aspect ratios is investigated under far‐ and near‐field excitation conditions. It is found that, for far‐field excitation, the strength of the plasmonic response of the nanodisk increases with its thickness, as expected from the increase in the number of conduction electrons in the system. However, for near‐field excitation, the plasmonic response becomes stronger as the thickness of the nanodisk is reduced. This behavior is attributed to the higher efficiency with which a near‐field source couples to the plasmons supported by thinner nanodisks. The results of this work advance the understanding of the plasmonic response of thin metallic nanostructures, thus increasing their potential for the development of novel applications.

36 MATERIALS SCIENCE↗
DOE OSTI2020

Modal dynamics of high-frequency transverse combustion instabilities

This paper investigates the modal dynamics of self-excited high frequency transverse instabilities in a multi-nozzle, swirl-stabilized can combustor. It utilizes results from multiple pressure sensors to decompose the disturbance into clockwise (CW) and counter-clockwise (CCW) waves, enabling a reconstruction of the pressure amplitude, phase, anti-nodal line location, and spin ratio. While these types of decompositions have been demonstrated on small scale combustors, particularly annular combustors, this is the first study to analyze these results for a high power, multi-nozzle can combustor. Its particular focus is in characterizing the system evolution in phase space and the nature of the system attractors under linearly unstable conditions; results are presented in spin ratio-phase difference space, so that limit cycle oscillations appear as fixed points. Results are shown for conditions where three different attractors dominate (standing, CW, and CCW) but are taken for very long time periods (~50,000 cycles) so that the system's interaction with these attractors can be observed. For the standing mode-dominated case, the phase portrait shows spiral trajectories converging to a single fixed point. For the spinning mode dominated cases, however, multiple fixed points and saddle points were observed, and the trajectories showed a more complicated structure. It was also shown that even though the CW mode is dominant, this mode intermittently switches to standing or CCW modes for short period. These results suggest that the strength of each attractor depends on test conditions and that random noise stochastically perturbs the system so that large regions of the phase space are explored. Lastly, one interesting observation is that the angular velocity of the anti-nodal line linearly varies with the spin ratio under standing-mode dominant conditions.

42 ENGINEERING↗
DOE OSTI2021

The scalar chemical potential in cosmological collider physics

Non-analyticity in co-moving momenta within the non-Gaussian bispectrum is a distinctive sign of on-shell particle production during inflation, presenting a unique opportunity for the “direct detection” of particles with masses as large as the inflationary Hubble scale ( H ). However, the strength of such non-analyticity ordinarily drops exponentially by a Boltzmann-like factor as masses exceed H . In this paper, we study an exception provided by a dimension-5 derivative coupling of the inflaton to heavy-particle currents, applying it specifically to the case of two real scalars. The operator has a “chemical potential” form, which harnesses the large kinetic energy scale of the inflaton, \( {\overset{\cdot }{\phi}}_0^{1/2}\approx 60H \) , to act as an efficient source of scalar particle production. Derivative couplings of inflaton ensure radiative stability of the slow-roll potential, which in turn maintains (approximate) scale-invariance of the inflationary correlations. We show that a signal not suffering Boltzmann suppression can be obtained in the bispectrum with strength f NL ~ \( \mathcal{O} \) (0 . 01–10) for an extended range of scalar masses \( \lesssim {\overset{\cdot }{\phi}}_0^{1/2} \) , potentially as high as 10 15 GeV, within the sensitivity of upcoming LSS and more futuristic 21-cm experiments. The mechanism does not invoke any particular fine-tuning of parameters or breakdown of perturbation-theoretic control. The leading contribution appears at tree-level , which makes the calculation analytically tractable and removes the loop-suppression as compared to earlier chemical potential studies of non-zero spins. The steady particle production allows us to infer the effective mass of the heavy particles and the chemical potential from the variation in bispectrum oscillations as a function of co-moving momenta. Our analysis sets the stage for generalization to heavy bosons with non-zero spin.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗
DOE OSTI2021

The many-body expansion for aqueous systems revisited: II. Alkali metal and halide ion – water interactions

We present a detailed study of the Many-Body Expansion (MBE) for alkali metal and halide ion-water interactions and quantify the effect of these ions on the strength of the surrounding aqueous hydrogen bonding environment. Building on our previous work on neutral water clusters [J. P. Heindel and S. S. Xantheas, J. Chem. Theor. Comput. 16 (11), 6843–6855 (2020)], we carry out the complete MBE for ion-water clusters, Z+/-(H2O)9, where Z = Li+, K+, Cs+, Cl-, Br-, I- and compare with the results for (H2O)10. The 2-B ion-water (I-W) interaction represents a larger percentage of the total cluster binding energy compared to a pure water cluster of the same size with the total 3-B term being smaller and of opposite sign (repulsive) whereas higher order terms are essentially negligible. The same oscillating behavior around zero for MBE terms higher than the 5-B with basis set that was reported for water clusters is also observed for the ion-water clusters considered with Basis Set Superposition Error (BSSE) corrections amending this like in the water cluster case. A remarkable, linear anti-correlation between the total 2-B ion-water and the total 2-B and 3-B water-water interactions is found, quantifying the effect of the different ions in disrupting and altering (weakening) the neighboring hydrogen bonded water network. Our results suggest a universal behavior of the two different families of ions (alkali metals and halides) for both the correlations of the various components of the total binding energies as well as the estimate of the 2-B BSSE correction which is reported to follow a common profile for ion-water and water-water interactions when cast in terms of reduced distances and energies. We expect our insights into the nature of BSSE will be important for future ab initio based, many-body molecular dynamics studies.

ion-water interactions, water-water interaction, m↗
DOE OSTI2025

Pressure tuning of competing interactions on a honeycomb lattice

Exchange interactions are mediated via orbital overlaps across chemical bonds. Thus, modifying the bond angles by physical pressure or strain can tune the relative strength of competing interactions. Here we present a remarkable case of such tuning between the Heisenberg (J) and Kitaev (K) exchange, which respectively establish magnetically ordered and spin liquid phases on a honeycomb lattice. We observe a rapid suppression of the Néel temperature (T N ) with pressure in Ag 3 LiRh 2 O 6 , a spin-1/2 honeycomb lattice with both J and K couplings. Using a combined analysis of x-ray data and first-principles calculations, we find that pressure modifies the bond angles in a way that increases the ∣K/J∣ ratio and thereby suppresses T N . Consistent with this picture, we observe a spontaneous onset of muon spin relaxation (μSR) oscillations below T N at low pressure, whereas in the high pressure phase, oscillations appear only when T < T N /2. Unlike other candidate Kitaev materials, Ag 3 LiRh 2 O 6 is tuned toward a quantum critical point by pressure while avoiding a structural dimerization in the relevant pressure range.

36 MATERIALS SCIENCE↗
DOE OSTI2021

Warm Phase of AMV Damps ENSO Through Weakened Thermocline Feedback

Abstract Interactions between ocean basins affect El Niño–Southern Oscillation (ENSO), altering its impacts on society. Here, we explore the effect of Atlantic Multidecadal Variability (AMV) on ENSO behavior using idealized experiments performed with the NCAR‐CESM1 model. Comparing warm (AMV+) to cold (AMV−) AMV conditions, we find that ENSO sea surface temperature (SST) anomalies are reduced by ∼10% and ENSO precipitation anomalies are shifted to the west during El Niño and east during La Niña. Using the Bjerknes stability index, we attribute the reduction in ENSO variability to a weakened thermocline feedback in boreal autumn. In AMV+, the Walker circulation and trade winds strengthen over the tropical Pacific, increasing the background zonal SST gradient. The background changes shift ENSO anomalies westwards, with wind stress anomalies more confined to the west. We suggest the changes in ENSO‐wind stress decrease the strength of the thermocline feedback in the east, eventually reducing ENSO growth rate.

Trascasa‐Castro, Paloma↗
DOE OSTI2021

On the Regionality of Moist Kelvin Waves and the MJO: The Critical Role of the Background Zonal Flow

Abstract A global model with superparameterized physics is used to shed light on the observed regionality of convectively coupled Kelvin waves and the Madden‐Julian Oscillation (MJO). A series of aquaplanet simulations over zonally uniform sea‐surface temperatures is performed, in which the axisymmetric structure of the background zonal flow is altered through nudging, while maintaining a quasi‐fixed rainfall climatology. Results show that nudging at the equator to match profiles typical of the Indo‐Pacific or eastern Pacific sectors yields eastward‐moving tropical rain spectra typical of those sectors. Two different mechanistic pathways are identified as being responsible for this mean‐flow dependence, in addition to Doppler shifting effects. The first is through shifts of the Rossby wave critical line in the subtropical upper troposphere that affect the lateral forcing of Kelvin‐mode circulations at the equator by eastward and equatorward‐propagating eddies impinging on the tropics from higher latitudes. The second is through changes in the strength of the mean cyclonic shear in the lower tropical troposphere that affect the degree to which intraseasonal fluctuations in Kelvin‐mode zonal winds modulate the activity of higher‐frequency equatorial Rossby‐type eddies. In cases where the mean low‐level cyclonic shear is enhanced, the strength of this modulation, referred to as “shear‐induced eddy modulation” or SIEM, is also seen to be enhanced, such that MJO‐like modes of variability are rendered either unstable or near neutral, depending on the strength of the shear.

Tulich, S. N.↗
DOE OSTI2021

Stability of expanding accretion shocks for an arbitrary equation of state

We present a theoretical stability analysis for an expanding accretion shock that does not involve a rarefaction wave behind it. The dispersion equation that determines the eigenvalues of the problem and the explicit formulae for the corresponding eigenfunction profiles are presented for an arbitrary equation of state and finite-strength shocks. For spherically and cylindrically expanding steady shock waves, we demonstrate the possibility of instability in a literal sense, a power-law growth of shock-front perturbations with time, in the range of $h_c< h<1+2 {\mathcal {M}}_2$ , where $h$ is the D'yakov-Kontorovich parameter, $h_c$ is its critical value corresponding to the onset of the instability and ${\mathcal {M}}_2$ is the downstream Mach number. Shock divergence is a stabilizing factor and, therefore, instability is found for high angular mode numbers. As the parameter $h$ increases from $h_c$ to $1+2 {\mathcal {M}}_2$ , the instability power index grows from zero to infinity. This result contrasts with the classic theory applicable to planar isolated shocks, which predicts spontaneous acoustic emission associated with constant-amplitude oscillations of the perturbed shock in the range $h_c< h<1+2 {\mathcal {M}}_2$ . Examples are given for three different equations of state: ideal gas, van der Waals gas and three-terms constitutive equation for simple metals.

Huete, César (ORCID:0000000232278520)↗
DOE OSTI2023

Using Artificial Microstructures to Understand Microstructure Property Relationship-Toughening Mechanisms in Metallic Glass (Final Report)

Metallic glasses are a new class of structural materials which exhibit exciting mechanical properties including high strength and elasticity. In terms of fracture toughness, the material class of metallic glasses spans a wide range; Some metallic glasses are extremely brittle and exhibit near ideal brittle behavior whereas others can be exceptional tough with values comparable to the toughest metals out there. Such large range of observed fracture toughness within the material class of metallic glasses is surprising as they have seemingly a very similar atomic structure. Therefore, we developed “artificial microstructures” which allows to decouple the various contribution of sample geometry, imperfection and structure. Specifically, we decouple variations in the alloys’ chemical composition and the atomic structure and quantified the resulting fracture toughness. Atomic structure of a metallic glass can be modified by the fictive temperature. The fictive temperature of a glass is the temperature at which the liquid metallic glass falls out of equilibrium upon colling and forms a glass. Upon further cooling the structure is maintained only thermal oscillations decrease due to a lower absolute temperature. We found that the effect of fictive temperature (same chemistry, different structural stages of the glass) is comparable to the variations of fracture toughness when the chemistry is varied. Hence, it appears that the subtle differences in the glass structure are responsible for the large range of fracture toughness’s observed. Our results reveal that fracture toughness within the material class of metallic glasses varies significantly and we found some example alloys with exceptional high resistance to fracture and others that are almost ideally brittle. Significant influences on the fracture toughness have the structure of the glass, its chemistry, and some imperfections in the structure.

36 MATERIALS SCIENCE↗
DOE OSTI2024

Lifetimes of excited states in $^{16}$C as a benchmark for ab initio developments

Lifetimes of higher-lying states ($2_2^+$ and $4_1^+$) in 16 C have been measured, employing the Gammasphere and Microball detector arrays, as key observables to test and refine ab initio calculations based on interactions developed within chiral Effective Field Theory. The presented experimental constraints to these lifetimes of $\tau ({2_2^+}) = [244, 446]\,~\textrm{fs}$ and $\tau ({4_1^+}) = [1.8, 4]\,~\textrm{ps}$, combined with previous results on the lifetime of the $2_1^+$ state of 16 C, provide a rather complete set of key observables to benchmark the theoretical developments. We present No-Core Shell-Model calculations using state-of-the-art chiral 2- (NN) and 3-nucleon (3N) interactions at next-to-next-to-next-to-leading order for both the NN and the 3N contributions and a generalized natural-orbital basis (instead of the conventional harmonic-oscillator single-particle basis) which reproduce, for the first time, the experimental findings remarkably well. The level of agreement of the new calculations as compared to the CD-Bonn meson-exchange NN interaction is notable and presents a critical benchmark for theory.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗
DOE OSTI2020

A numerical-homogenization based phase-field fracture modeling of linear elastic heterogeneous porous media

Most porous media, such as geomaterials and biomaterials are highly heterogeneous in nature, and they contain large variations of microscopic pore structures, such as pore sizes, pore distribution, and pore shapes. The oscillation of microscopic structures is a substantial challenge in theoretical characterization and is usually ignored in continuous modeling. However, mechanical behavior of porous media such as deformation and failure, are essentially impacted by the microscopic heterogeneity which needs to be considered in modeling a porous media. Here, this research proposes a numerical modeling framework with a capability to investigate the effect of microscopic heterogeneity on the macroscopic fracture behavior in porous media by using a numerical homogenization technique, combined with the phase-field fracture modeling method. This numerical modeling strategy computes a homogenized elasticity tensor based on microscopic heterogeneous pore structures heterogenous porous domain by solving boundary value problems at microscopic domain. The strain energy and subsequent propagation of macroscopic fractures will be updated using homogenized stiffness information. Using this numerical scheme, the microscopic pore structure’s impact on the fracture behavior through the homogenized elastic tensor will be taken into account. This multiscale technique is benchmarked against classical problems. Finally, the results highlight the importance of the underlying pore structure and reveal that both fracture strength and propagation path can be influenced by the microscopic heterogeneity.

36 MATERIALS SCIENCE↗
DOE OSTI2026

Efficiency-optimized relativistic plasma harmonics for extreme fields

Bright harmonic radiation from relativistically oscillating laser plasmas offers a direct route for generating extreme electromagnetic fields. Theory predicts that under optimized conditions, the plasma medium can support strong spatiotemporal compression of laser energy in a coherent harmonic focus (CHF), delivering intensity boosts many orders of magnitude greater than the incident driving laser pulse. Although diffraction-limited performance (spatial compression) and attosecond phase locking (temporal compression) have been demonstrated experimentally, efficient coupling of relativistically intense laser pulse energy into the emitted harmonic cone has not been realized so far. Here we demonstrate that this highly nonlinear interaction can be tailored to deliver the maximum conversion efficiencies predicted from simulations. By fine-tuning the temporal profile of the driving laser on sub-picosecond (<10 −12 s) timescales, energies >9 mJ between the 12th and 47th harmonics are observed. These results are in agreement with the theoretically expected efficiency dependence on harmonic order, verifying that optimal conditions have been achieved in the generation process. This is the important final element required to achieve the expected intensity boosts from a CHF in experiments. Although obtaining spatiotemporal compression and optimal efficiency simultaneously remains challenging, the path to realizing extreme optical field strengths approaching the critical field of quantum electrodynamics (the Schwinger limit at >10 16 V cm −1 or >10 29 W cm −2 ) is now open, permitting all-optical studies of the quantum vacuum and new frontiers for intense attosecond science.

High-harmonic generation↗
DOE OSTI2021

Phase-weighted slant stacking for surface wave dispersion measurement

SUMMARY Surface wave retrieval from ambient noise records using seismic interferometry techniques has been widely used for multiscale shear wave velocity (Vs) imaging. One key step during Vs imaging is the generation of dispersion spectra and the extraction of a reliable dispersion curve from the retrieved surface waves. However, the sparse array geometry usually affects the ability for high-frequency (>1 Hz) seismic signals’ acquisition. Dispersion measurements are degraded by array response due to sparse sampling and often present smeared dispersion spectra with sidelobe artefacts. Previous studies usually focus on interferograms’ domain (e.g. cross-correlation function) and attempt to enhance coherent signals before dispersion measurement. We propose an alternative technique to explicitly deblur dispersion spectra through use of a phase-weighted slant-stacking algorithm. Numerical examples demonstrate the strength of the proposed technique to attenuate array responses as well as incoherent noise. Three different field examples prove the flexibility and superiority of the proposed technique: the first data set consists of ambient noise records acquired using a nodal seismometer array; the second data set utilizes distributed acoustic sensing (DAS) and a marine fibre-optic cable to acquire a similar ambient noise data set; the last data set is a vibrator-based active-source surface wave data. The enhanced dispersion measurements provide cleaner and higher-resolution spectra without distortions which will assist both human interpreters as well as ML algorithms in efficiently picking curves for subsequent Vs inversion.

58 GEOSCIENCES↗