DOE OSTI2010
Various series of experiments were carried out on cements pastes, concretes made with a variety of reactive aggregates, composite specimens made of cement paste and reactive aggregate particles, and a variety of reactive natural aggregates and mineral phases immersed in various Li-bearing solutions. The main objective was to determine which mechanisms(s) better explain(s) the effectiveness of LiNO{sub 3} against ASR and variations in this effectiveness as well with the type of reactive aggregate to counteract. The principal conclusions are the following: (1), the pH in the concrete pore solution does not significantly decrease in the presence of LiNO{sub 3}; (2), the concentration of silica in the pore solution is always low and not affected by the presence of LiNO{sub 3}, which does not support the mechanism relating to higher solubility of silica in the presence of lithium; (3), the only reaction product observed in the LiNO{sub 3}-bearing concretes looks like classical ASR gel and its abundance is proportional to concrete expansion, thus is likely expansive while likely containing lithium; this does not support the mechanisms relating to formation of a non or less expansive Si-Li crystalline product or amorphous gel; (4), early-formed reaction products coating the reactive silica grains or aggregate particles, which could act as a physical barrier against further chemical attack of silica, were not observed in the LiNO{sub 3}-bearing concretes, but only for a number of reactive materials after immersion in 1 N LiOH at 350 deg. C in the autoclave (also at 80 deg. C for obsidian); (5), higher chemical stability of silica due to another reason than pH reduction or early formation of a protective coating over the reactive phases, is the mechanism among those considered in this study that better explains the effectiveness of LiNO{sub 3} against ASR.