Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “solid solution”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 199 records · Page 11

Mechanochemical-thermal preparation and structural studies of mullite-type Bi{sub 2}(Ga{sub x}Al{sub 1-x}){sub 4}O{sub 9} solid solutions

A series of Bi{sub 2}(Ga{sub x}Al{sub 1-x}){sub 4}O{sub 9} solid solutions (0{<=}x{<=}1), prepared by mechanochemical processing of Bi{sub 2}O{sub 3}/Ga{sub 2}O{sub 3}/Al{sub 2}O{sub 3} mixtures and subsequent annealing, was investigated by XRD, EDX, and {sup 27}Al MAS NMR. The structure of the Bi{sub 2}(Ga{sub x}Al{sub 1-x}){sub 4}O{sub 9} solid solutions is found to be orthorhombic, space group Pbam (No. 55). The lattice parameters of the Bi{sub 2}(Ga{sub x}Al{sub 1-x}){sub 4}O{sub 9} series increase linearly with increasing gallium content. Rietveld refinement of the XRD data as well as the analysis of the {sup 27}Al MAS NMR spectra show a preference of gallium cations for the tetrahedral sites in Bi{sub 2}(Ga{sub x}Al{sub 1-x}){sub 4}O{sub 9}. As a consequence, this leads to a far from random distribution of Al and Ga cations across the whole series of solid solutions. -- Graphical Abstract: Mullite-type Bi{sub 2}(Ga{sub x}Al{sub 1-x}){sub 4}O{sub 9} mixed crystals (0{<=}x{<=}1) prepared by a combined mechanochemical-thermal route possess a non-random distribution of Ga{sup 3+} and Al{sup 3+} cations over the sites of tetrahedral (T) and octahedral [O] coordination, characterized by the preference of Ga{sup 3+} (Al{sup 3+}) for tetrahedral (octahedral) sites. Display Omitted Highlights: {yields} Bi{sub 2}(Ga{sub x}Al{sub 1-x}){sub 4}O{sub 9} (0{<=}x{<=}1) were synthesized via mechanochemical-thermal route. {yields} The lattice parameters of Bi{sub 2}(Ga{sub x}Al{sub 1-x}){sub 4}O{sub 9} increase linearly with gallium content. {yields} Quantitative information on the cation distribution in Bi{sub 2}(Ga{sub x}Al{sub 1-x}){sub 4}O{sub 9} is derived. {yields} Ga{sup 3+} and Al{sup 3+} show the preference for tetrahedral and octahedral sites, respectively.

36 MATERIALS SCIENCE↗

Synthesis of luminescent nanocrystals and solid solutions in the YNbO{sub 4}–EuNbO{sub 4} system via hydrothermal route

Highlights: • Nanocrystals: YNbO{sub 4}:Eu{sup 3+} were directly formed under hydrothermal conditions at 240 °C. • The nanocrystals (10–20 nm) were luminescent and had ellipsoidal morphology. • The complete solid solutions in the YNbO{sub 4}–EuNbO{sub 4} system were also directly formed. • The PL intensity and R/O intensity ratio changed depending on heating temperature. - Abstract: Luminescent nanocrystals having distinctive ellipsoidal morphology and the complete solid solution of monoclinic phase in the YNbO{sub 4}–EuNbO{sub 4} system were hydrothermally formed under weakly basic conditions at 180–240 °C for 5 h. The excitation spectra of the Y{sub 1−x}Eu{sub x}NbO{sub 4} nanocrystals, which consisted of the charge transfer (CT) band around 240–270 nm due to [NbO{sub 4}]{sup 3−}–Eu{sup 3+} interaction and several sharp bands corresponding to the f–f transitions of Eu{sup 3+}, e.g. the most intense absorption band at 395 nm ({sup 7}F{sub 0}→{sup 5}L{sub 6}), showed that the compounds could be excited by both ultraviolet and visible light. A dominant red emission at 610 nm and a weak orange emission at 590 nm assigned to {sup 5}D{sub 0}→{sup 7}F{sub 2} and {sup 5}D{sub 0}→{sup 7}F{sub 1} transitions of Eu{sup 3+}, respectively were observed in the as-prepared nanocrystals containing europium under excitation at 395 nm. The heat treatment at temperatures more than 1000 °C in air was effective for the improvement in the photoluminescence intensity of the as-prepared solid solutions. By the enhancement in the crystallinity and crystallite growth of the monoclinic phase through heat treatment at 1300 °C in air, the luminescence intensity of the as-prepared solid solution, Y{sub 0.75}Eu{sub 0.25}NbO{sub 4} (x = 0.25), which showed the most significant photoluminescence, became more than 5 times as strong as that before the heat treatment.

36 MATERIALS SCIENCE↗

Structural and dielectric properties of erbium doped BiFeO{sub 3}−PbTiO{sub 3} solid solutions

Single phase Er substituted at A-site BiFeO{sub 3}−PbTiO{sub 3} solid solutions were synthesized using solid state reaction route. The calcinations at different temperature reveals that the single and pure tetragonal phase formation has been accomplished at 1000°C. The SEM micrographs did not show any distinguishable change in grain size. The dielectric studies established that the dielectric constant decreases and ferroelectric T{sub c} increases with increase in Er.

36 MATERIALS SCIENCE↗

Ab initio property predictions of quinary solid solutions using small binary cells

The Set of Small Ordered Structures (SSOS) approach is an ab initio technique for modelling random solid solutions in which many small structures are averaged so that their correlation functions match those of a desired composition. SSOS has been shown to be effective in reducing the cost of density functional theory calculations relative to other well-known techniques such as cluster expansions and special quasirandom structures for modelling solid solutions. Here in this work, we demonstrate that SSOS’s can be constructed using cells with only a subset of elements while still accurately modelling multi-component systems. Specifically, we show that small binary cells can effectively model two quinary high entropy alloys – NbTaTiHfZr and MoNbTaVW – accurately capturing properties such as formation energy, lattice parameters, elastic constants, and root-mean-square atomic displacements. Overall, this insight is useful for those looking to construct databases of such small structures for predicting the properties of multi-component solid solutions, as it greatly decreases the number of structures that needs to be considered.

36 MATERIALS SCIENCE↗

Influence of the electron-phonon interaction on the temperature dependence of the phonon mode frequency in the II-VI compound solid solutions

We present an experimental investigation of the temperature dependence of the TO-phonon mode frequencies for the HgTe-based II-VI semiconductor solid solutions. In the case of the ternary Hg{sub 0.9}Zn{sub 0.1}Te solid solution was shown a discontinuity in the temperature dependence of the HgTe-like T{sub 0}-mode and of the ZnTe-like T{sub 1}-mode, similar to the Hg{sub 0.85}Cd{sub 0.15}Te system [Sheregii et al., Phys. Rev. Lett. 102, 045504 (2009)]. A generalization of the theoretical temperature shift of the phonon mode frequency as analytic equation is derived that includes both the anharmonic contribution and the electron-phonon e-p interaction which in this case is returnable—the electron subsystem effect on the phonon one. Data show that our equation satisfactorily describes the temperature shift of both Hg{sub 0.85}Cd{sub 0.15}Te and Hg{sub 0.90}Zn{sub 0.10}Te containing Dirac point (E{sub g} ≡ Γ{sub 6} – Γ{sub 8} = 0) although one of the two constants describing the anharmonic shift of the HgTe-like mode should be positive what is abnormal too. In the case of the Hg{sub 0.80}Cd{sub 0.20}Te and Hg{sub 0.763}Zn{sub 0.237}Te solid solution, the role of the returnable e-p contribution is negligible but a positive temperature shift for the HgTe-like modes occurs. This result does not allow to explain the positive temperature shift of these modes merely by the contribution of the (e-p) interaction. Indeed, the relativistic contribution to the chemical bonds induces an abnormal temperature shift of the electron states in Hg-based semiconductors—the effect is expected since the Hg d spin-orbit split contribution to chemical bonds may lead to an abnormal temperature shift of the HgTe-like modes.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Suppression of vacancy cluster growth in concentrated solid solution alloys

Large vacancy clusters, such as stacking-fault tetrahedra, are detrimental vacancy-type defects in ion-irradiated structural alloys. Suppression of vacancy cluster formation and growth is highly desirable to improve the irradiation tolerance of these materials. In this paper, we demonstrate that vacancy cluster growth can be inhibited in concentrated solid solution alloys by modifying cluster migration pathways and diffusion kinetics. The alloying effects of Fe and Cr on the migration of vacancy clusters in Ni concentrated alloys are investigated by molecular dynamics simulations and ion irradiation experiment. While the diffusion coefficients of small vacancy clusters in Ni-based binary and ternary solid solution alloys are higher than in pure Ni, they become lower for large clusters. This observation suggests that large clusters can easily migrate and grow to very large sizes in pure Ni. In contrast, cluster growth is suppressed in solid solution alloys owing to the limited mobility of large vacancy clusters. Finally, the differences in cluster sizes and mobilities in Ni and in solid solution alloys are consistent with the results from ion irradiation experiments.

36 MATERIALS SCIENCE↗

Evolution of structural distortions in solid solutions between BiMnO{sub 3} and BiScO{sub 3}

Crystal structures of solid solutions of BiMn{sub 1-x}Sc{sub x}O{sub 3} with x=0.05, 0.1, 0.2, 0.3, 0.4, 0.5, and 0.7 were studied with synchrotron X-ray powder diffraction. The strong Jahn-Teller distortion, observed in BiMnO{sub 3} at 300 K and associated with orbital order, disappeared already in BiMn{sub 0.95}Sc{sub 0.05}O{sub 3}. The orbital-ordered phase did not appear in BiMn{sub 0.95}Sc{sub 0.05}O{sub 3} down to 90 K. Almost the same octahedral distortions were observed in BiMn{sub 1-x}Sc{sub x}O{sub 3} with 0.05<=x<=0.7 at room temperature and in BiMnO{sub 3} at 550 K above the orbital ordering temperature T{sub OO}=473 K. These results allowed us to conclude that the remaining octahedral distortions observed in BiMnO{sub 3} above T{sub OO} are the structural feature originated from the highly distorted monoclinic structure. - Graphical Abstract: Compositional dependence of octahedral distortion parameters DELTA(M1O{sub 6}) and DELTA(M2O{sub 6}) in solid solutions BiMn{sub 1-x}Sc{sub x}O{sub 3} at 300 K.

36 MATERIALS SCIENCE↗

Structural, magnetic, and dielectric properties of solid solutions between BiMnO{sub 3} and YMnO{sub 3}

Bi{sub 1−x}Y{sub x}MnO{sub 3} (0.1≤x≤0.9) solid solutions were prepared by the high-pressure high-temperature method at 6 GPa and 1573 K. They crystallize in the GdFeO{sub 3}-type perovskite structure with the Pnma symmetry. Crystal structures of Bi{sub 0.9}Y{sub 0.1}MnO{sub 3} and Bi{sub 0.5}Y{sub 0.5}MnO{sub 3} are studied by synchrotron X-ray powder diffraction at room temperature. Only one Néel temperature, T{sub N}, is found in samples with 0.1≤x≤0.9 in comparison with two Néel temperatures observed in YMnO{sub 3} (T{sub N}=29 and 39 K). Samples with 0.5≤x≤0.9 have almost constant T{sub N}=44 K, while T{sub N} starts to increase linearly for other compositions: T{sub N}=46 K for x=0.3, T{sub N}=58 K for x=0.2, and T{sub N}=68 K for x=0.1. Field-induced transitions from canted-antiferromagnetic states to antiferromagnetic states are detected at about 30 kOe for x=0.2 and 70 kOe for x=0.1. Dielectric constant increases below T{sub N} in samples with 0.5≤x≤1, while it decreases below T{sub N} in samples with 0.1≤x≤0.3. Our data suggest that a magnetic structure changes near x=0.4. By extrapolation, we could estimate lattice parameters (a=5.9221 Å, b=7.5738 Å, and c=5.4157 Å) and T{sub N}=79 K for a hypothetical Pnma modification of BiMnO{sub 3}. - Graphical abstract: Bi{sub 1−x}Y{sub x}MnO{sub 3} solid solutions were prepared in the whole compositional range by the high-pressure method. Magnetic and dielectric data suggest that a magnetic structure changes near x=0.4. No ferroelectric properties were found. - Highlights: • Orthorhombic Bi{sub 1−x}Y{sub x}MnO{sub 3} solid solutions are prepared by the high-pressure method. • Structural, magnetic, and dielectric properties are studied. • One Néel temperature is found in all the samples. • T{sub N}=44 K for x=0.5–0.9, 46 K for x=0.3, 58 K for x=0.2, and 68 K for x=0.1. • No ferroelectricity is observed.

36 MATERIALS SCIENCE↗

Structural and physical properties evolution of BaIr{sub 1-x}Mn{sub x}O{sub 3} solid solutions synthesized by high-pressure sintering

The BaIr{sub 1-x}Mn{sub x}O{sub 3} (0.0<=x<=1.0) solid solutions were synthesized by using the solid-state chemical method and high pressure sintering in the pressure range 0-5 GPa. According to the pressure-composition 'phase diagram' at 1000 deg. C, the 9M BaIr{sub 1-x}Mn{sub x}O{sub 3} transforms to the 6M form at 5 GPa and x<=1/6. In the x range 0.5-1.0, it transforms to the 9R form in a large pressure range. For the 9M BaIrO{sub 3}, the Mn ions substitution for Ir ions enhances the semiconducting property, and reduces the weak ferromagnetism. When x is larger than 1/3, the 9M/9R BaIr{sub 1-x}Mn{sub x}O{sub 3} behave spin-glass-like state at low temperature, with the glass transition temperature T{sub g} about 60 K. For the 6M BaIrO{sub 3}, the Mn ions doping results in that it transforms to insulator and spin-glass-like magnetism from the initial paramagnetic metal. - Graphical abstract: The BaRu{sub 1-x}Mn{sub x}O{sub 3} solid solutions were synthesized by using the solid-state chemical method and high-pressure sintering, and the pressure-composition 'phase diagram' at 1000 deg. C was obtained.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

A high-pressure route to thermoelectrics with low thermal conductivity: The solid solution series AgIn{sub x}Sb{sub 1−x}Te{sub 2} (x=0.1–0.6)

Metastable rocksalt-type phases of the solid solution series AgIn{sub x}Sb{sub 1−x}Te{sub 2} (x=0.1, 0.2, 0.4, 0.5 and 0.6) were prepared by high-pressure synthesis at 2.5 GPa and 400 °C. In these structures, the coordination number of In{sup 3+} is six, in contrast to chalcopyrite ambient-pressure AgInTe{sub 2} with fourfold In{sup 3+} coordination. Transmission electron microscopy shows that real-structure phenomena and a certain degree of short-range order are present, yet not very pronounced. All three cations are statistically disordered. The high degree of disorder is probably the reason why AgIn{sub x}Sb{sub 1−x}Te{sub 2} samples with 0.4<x<0.6 exhibit very low thermal conductivities with a total κ<0.5 W/K m and a lattice contribution of κ{sub ph} ∼0.3 W/K m at room temperature. These are lower than those of other rocksalt-type tellurides at room temperature; e.g. the well-known thermoelectric AgSbTe{sub 2} (κ ∼0.6 W/K m). The highest ZT value (0.15 at 300 K) is observed for AgIn{sub 0.5}Sb{sub 0.5}Te{sub 2}, mainly due to its high Seebeck coefficient of 160 µV/K. Temperature-dependent X-ray powder patterns indicate that the solid solutions are metastable at ambient pressure. At 150 °C, the quaternary compounds decompose into chalcopyrite-type AgInTe{sub 2} and rocksalt-type AgSbTe{sub 2}. - Graphical abstract: Reaction scheme, temperature characteristics of the ZT value and a selected-area electron diffraction pattern (background) of AgIn{sub 0.5}Sb{sub 0.5}Te{sub 2}, which crystallizes in a rocksalt-type structure with statistical cation disorder. Display Omitted - Highlights: • High-pressure synthesis yields the novel solid solution series AgIn{sub x}Sb{sub 1−x}Te{sub 2}. • In contrast to AgInTe{sub 2}, the compounds are inert at ambient pressure. • HRTEM shows no pronounced short-range order in the disordered NaCl-type structure. • The metastable phases exhibit very low total thermal conductivities <0.5 W/K m. • ZT values of 0.15 at room temperature were measured for AgIn{sub 0.5}Sb{sub 0.5}Te{sub 2}.

36 MATERIALS SCIENCE↗

Effect of atomic size mismatch and chemical complexity on the local lattice distortion of BCC solid solution alloys

Here, the effects of atomic size mismatch and chemical complexity on the local lattice distortion of solid-solution alloys VNbTa, TiVNbMo, TiVNbMoTa and TiVNbMoTaWRe with body-centered cubic (BCC) structure are quantitatively studied with time-of-flight neutron total scattering, extended X-ray absorption fine structure (EXAFS) measurements and first principles calculations. Neutron atomic pair distribution function (PDF) measurements found that the local lattice distortion in the ternary solid-solution alloy VNbTa is 1.1 %, obviously larger than that of the most complicated solid-solution alloy (0.27% for TiVNbMoTaWRe). Our results suggested that atomic size mismatch in high entropy alloys is more critical to the local lattice distortion than chemical complexity. Both EXAFS analysis and theoretical calculations indicate that there is a maximum of ~4 % difference between the bonding length of different atomic pairs in VNbTa.

36 MATERIALS SCIENCE↗

Polymorphic, Porous, and Host–Guest Nanostructures Directed by Monolayer–Substrate Interactions: Epitaxial Self-Assembly Study of Cyclic Trinuclear Au(I) Complexes on HOPG at the Solution–Solid Interface

Synthesis, crystallographic characterization, and molecular self-assembly of two novel cyclotrimeric gold(I) complexes, Au 3 [3,5-(COOEt) 2 Pz] 3 (Au 3 Pz 3 ) and Au 3 [(n-Pr–O)C=N(Me)] 3 (Au 3 Cb 3 ) was studied. Single crystal X-ray crystallography data reveal that both gold(I) complexes have one-dimensional stacking patterns caused by intermolecular Au(I)···Au(I) aurophilic interactions. The Au 3 Pz 3 trimer units stack with two alternate and symmetrical Au(I)···Au(I) interactions while the Au 3 Cb 3 units have three alternating and nonsymmetrical Au(I)···Au(I) interactions. Molecular self-assembly of the gold(I) complexes on the 1-phenyloctane/highly ordered pyrolytic graphite (HOPG) (0001) solution–solid interface is studied with scanning tunneling microscopy (STM). The gold(I) cyclotrimers form epitaxial nanostructures on the HOPG surface. At a concentration of ~1 × 10 –4 M, Au 3 Pz 3 complexes exhibit a single morphology, while Au 3 Cb 3 complexes exhibit polymorphology. Two polymorphs, one nonporous and the other porous, are observed at 22.0 ± 2.0 °C for Au 3 Cb 3 complexes. A nonporous, low-surface-density (0.82 molecules/nm 2 ) Au 3 Cb 3 nanostructure forms first and then transforms into a high-density (1.43 molecules/nm2) porous nanostructure. This is the first time any porous surface nanostructure is reported for an organometallic system. The porous structure is thought to be stabilized by a combination of hydrogen bonding and monolayer–substrate interactions. These pores are utilized to incorporate pyrene into the film, rendering this the first organometallic host–guest system imaged at the solid–solution interface. In conclusion, molecular and periodic density functional theory (DFT) calculations shed light on the two-dimensional topography and polymorphic self-assembly revealed by STM; these calculations suggest significant electronic hybridization of the Au 3 trimer orbitals and HOPG. The multiple-technique approach used herein provides insights concerning molecule–substrate and molecule–molecule interactions.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

An Optical Study of Disordering in Cadmium Mercury Telluride Solid Solutions

The disordering in cadmium mercury telluride solid solution films grown by molecular beam epitaxy on Si and GaAs substrates has been examined by optical transmission and photoluminescence investigations. The effect of a fundamental decrease in the disordering scale under thermal annealing and possible interplay of the observed phenomena with defects typical of films grown by molecular beam epitaxy are discussed.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Synthesis and Flash Sintering of (Hf1-xZrx)B2 Solid Solution Fine Powders

Fine powders of (Hf1-xZrx)B2 solid solution were synthesized by two methods. In the first one, solution-based processing of HfCl4, ZrCl4, sucrose and H3BO3 was carried out followed by heat treatment (e.g., at 1500 °C for 1 h) in Argon to achieve the carbothermal reduction (CTR) reaction to form the boride solid solution. In the second one, called boron hydride reduction (BHR) method, HfCl4, ZrCl4 and NaBH4 were directly mixed in a glove box followed by heat treatment in Argon at elevated temperatures from 700 to 1500 °C. In addition, the powders synthesized via both methods were flash sintered without sample preheating in a homemade setup. The synthesized powders as well as the flash sintered bulk ceramics were characterized using different techniques including XRD, SEM, EDS, TEM, TGA-DSC, and Vickers hardness test to reveal the inter-relationships between starting materials composition, processing conditions, and the resulting materials microstructure and physical/chemical properties.

Belisario, Jose↗

The Influence of Dynamic Strain Aging on Fatigue and Creep-Fatigue Characterization of Nickel-Base Solid Solution Strengthened Alloys

The nickel-base solid solution alloys, Alloy 617 and Alloy 230, have been observed to exhibit serrated yielding or dynamic strain aging (DSA) in a temperature/strain rate regime of interest for intermediate heat exchangers (IHX) of high temperature nuclear reactors. At 800°C, these nickel-base alloys are prone to large serrated yielding events at relatively low strains. The presence of DSA introduces challenges in characterizing the creep-fatigue and low cycle fatigue behavior. These challenges include inability to control the target strains as a result of DSA induced strain excursions and distorted hysteresis loops. Methods to eliminate or reduce the influence of DSA on creep-fatigue testing have been investigated, including varying the strain rate, stepping to the target strain, and adjusting servo-hydraulic tuning parameters. It has not been possible to eliminate the impact of serrated flow in the temperature range of interest for these alloys without compromising the desired test protocols.

36 MATERIALS SCIENCE↗

Irradiation-induced composition patterns in binary solid solutions

A theoretical/computational model for the irradiation-driven compositional instabilities in binary solid solutions has been developed. The model is suitable for investigating the behavior of structural alloys and metallic nuclear fuels in a reactor environment as well as the response of alloy thin films to ion beam irradiation. The model is based on a set of reaction-diffusion equations for the dynamics of vacancies, interstitials, and lattice atoms under irradiation. The dynamics of these species includes the stochastic generation of defects by collision cascades as well as the defect reactions and diffusion. The atomic fluxes in this model are derived based on the transitions of lattice defects. The set of reaction-diffusion equations are stiff, hence a stiffly stable method, also known as the Gear method, has been used to numerically approximate the equations. For the Cu-Au alloy in the solid solution regime, the model results demonstrate the formation of compositional patterns under high-temperature particle irradiation, with Fourier space properties (Fourier spectrum, average wavelength, and wavevector) depending on the cascade damage characteristics, average composition, and irradiation temperature.

36 MATERIALS SCIENCE↗

Remarkable Strontium B-Site Occupancy in Ferroelectric Pb(Zr(1-X)Ti(X))O(3) Solid Solutions Doped With Cryolite-Type Strontium Niobate

New high-performance ferroelectric solid solutions based on Pb(Zr{sub 1-x}Ti{sub x})O{sub 3} (PZT), which are doped with cryolite-type strontium niobate (SNO, Sr{sub 4}(Sr{sub 2-2y/3}Nb{sub 2+2y/3})O{sub 11+y}V{sub O;1-y} with 0{<=}y{<=}1) and hence denoted PZT:SNO, and their microscopic structure and defect chemistry are described. Extended X-ray absorption fine-structure (EXAFS) analyses of PZT:SNO samples revealed that -10% of Sr{sup 2+} occupy the nominal B-sites of the perovskite-type PZT host lattice. This result is supported by EXAFS analyses of both a canonical SrTiO{sub 3} perovskite and two SNO model and reference compounds. Fit models that do not account for Sr{sup 2+} on B-sites are ruled out. A clear Sr-Pb peak in Fourier-transformed EXAFS data visually confirms this structural model. The generation of temporary oxygen vacancies and the intricate defect chemistry induced by SNO-doping of PZT are crucial for the exceptional material properties of PZT:SNO. As a result, ferroelectric PZT:SNO solid solutions are very attractive for use in new and innovative piezoelectric actuator and transducer applications.

36 MATERIALS SCIENCE↗

Length scales and scale-free dynamics of dislocations in dense solid solutions

The fundamental interactions between an edge dislocation and a random solid solution are studied by analyzing dislocation line roughness profiles obtained from molecular dynamics simulations of Fe 0.70 Ni 0.11 Cr 0.19 over a range of stresses and temperatures. These roughness profiles reveal the hallmark features of a depinning transition. Namely, below a temperature-dependent critical stress, the dislocation line exhibits roughness in two different length scale regimes which are divided by a so-called correlation length. This correlation length increases with applied stress and at the critical stress (depinning transition or yield stress) formally goes to infinity. Above the critical stress, the line roughness profile converges to that of a random noise field. Motivated by these results, a physical model is developed based on the notion of coherent line bowing over all length scales below the correlation length. Above the correlation length, the solute field prohibits such coherent line bow outs. Using this model, we identify potential gaps in existing theories of solid solution strengthening and show that recent observations of length-dependent dislocation mobilities can be rationalized.

36 MATERIALS SCIENCE↗