Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “sample environments”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 199 records · Page 11
All sourcesNASA NTRSDOE OSTI
DOE OSTI2022

Environmental RNA as a Tool for Marine Community Biodiversity Assessments

Abstract Microscopic organisms are often overlooked in traditional diversity assessments due to the difficulty of identifying them based on morphology. Metabarcoding is a method for rapidly identifying organisms where Environmental DNA (eDNA) is used as a template. However, legacy DNA is problematically detected from organisms no longer in the environment during sampling. Environmental RNA (eRNA), which is only produced by living organisms, can also be collected from environmental samples and used for metabarcoding. The aim of this study was to determine differences in community composition and diversity between eRNA and eDNA templates for metabarcoding. Using mesocosms containing field-collected communities from an estuary, RNA and DNA were co-extracted from sediment, libraries were prepared for two loci (18S and COI), and sequenced using an Illumina MiSeq. Results show a higher number of unique sequences detected from eRNA in both markers and higher α-diversity compared to eDNA. Significant differences between eRNA and eDNA for all β-diversity metrics were also detected. This study is the first to demonstrate community differences detected with eRNA compared to eDNA from an estuarine system and illustrates the broad applications of eRNA as a tool for assessing benthic community diversity, particularly for environmental conservation and management applications.

Giroux, Marissa S.↗
DOE OSTI2022

Optical properties of Peaked Spectrum radio sources

ABSTRACT In this work, we study the optical properties of compact radio sources selected from the literature in order to determine the impact of the radio-jet in their circumnuclear environment. Our sample includes 58 Compact Steep Spectrum (CSS) and GigaHertz Peaked Spectrum (GPS) and 14 Megahertz-Peaked spectrum (MPS) radio sources located at z ≤ 1. The radio luminosity (LR) of the sample varies between Log LR ∼ 23.2 and 27.7 W Hz−1. We obtained optical spectra for all sources from SDSS-DR12 and performed a stellar population synthesis using the starlight code. We derived stellar masses (M⋆), ages 〈t⋆〉, star formation rates (SFR), metallicities 〈Z⋆〉 and internal reddening AV for all young AGNs of our sample. A visual inspection of the SDSS images was made to assign a morphological class for each source. Our results indicate that the sample is dominated by intermediate to old stellar populations and there is no strong correlation between optical and radio properties of these sources. Also, we found that young AGNs can be hosted by elliptical, spiral and interacting galaxies, confirming recent findings. When comparing the optical properties of CSS/GPS and MPS sources, we do not find any significant difference. Finally, the Mid-Infrared WISE colours analysis suggests that the compact radio sources defined as powerful AGNs are, in general, gas-rich systems.

79 ASTRONOMY AND ASTROPHYSICS↗
DOE OSTI2020

Additional Analysis of the 2H-Evaporator Wall Scale Sample HTF-17-57

Savannah River National Laboratory previously analyzed scale samples from both the wall and cone sections of the 242-16H Evaporator prior to chemical cleaning. The samples were analyzed for uranium and plutonium isotopes required for a Nuclear Criticality Safety Assessment of the scale removal process. The analysis of the scale samples found the material to contain crystalline nitrated cancrinite and clarkeite and significant amounts of mercury. Savannah River Remediation subsequently requested additional analyses on the samples. Inspection of the sample bottles revealed that no sample remained of the cone scale (HTF-17-56) while approximately 4 g of the wall scale sample (HTF-17-57) remained. The wall sample was subsequently ground with a mortar and pestle, at which time it was discovered that the sample contained a significant amount of liquid, metallic mercury. The portion of the sample that was not mercury was approximately 3 g. This portion of the sample was analyzed to determine the concentrations of selected radionuclides. The following radionuclide concentrations were measured: <9.6E+02 dpm/g H-3, 2.9E+02 dpm/g C-14, 5.6E+03 dpm/g Tc-99, and 1.6E+02 dpm/g I-129. Blank samples were also analyzed to evaluate sample contamination from the Shielded Cells environment. All blank sample results were below detectable limits. Due to the limited sample size and the anticipated low levels of the target radionuclides, no replicate sample analysis was conducted.

12 MANAGEMENT OF RADIOACTIVE AND NON-RADIOACTIVE W↗
DOE OSTI2023

Printed Strain Gauges for High Temperature Applications (>300°C)

The real-time understanding of strain and deformation of materials provides prognostic health monitoring of components of current operational reactors and valuable data that shortens the timeline for the development of new nuclear-relevant materials in test reactor experiments. This report discusses the current development and testing of additively manufactured strain gauges. This has potential to improve the sensor design and manufacturing techniques to meet the requirements of the current and advanced nuclear reactors (i.e., in terms of environment conditions, sample geometry, and materials compatibility). The developmental additively manufactured strain gauges are exposed to separate effects testing (i.e., mechanical strain, high temperature) to determine environmental factors that affect the strain gauge. In addition, sensor qualification methodologies are further developed for determining the reliability and robustness at the interface of the AM strain gauge materials.

36 MATERIALS SCIENCE↗
DOE OSTI2025

Investigations on the Thermal Stability and Kinetics of Biolubricants Synthesized from Different Types of Vegetable Oils

Petroleum-based lubricants raise environmental concerns due to their non-biodegradability and toxicity, whereas biobased lubricants underperform owing to low thermal stability. This study examined and compared three vegetable oils, along with their chemically modified versions, to better understand their suitability as biolubricants. High oleic soybean oil (HOSOY), regular soybean oil (RSOY), and waste cooking oil (WCO) were subjected to chemical modification, where isopropyl groups were attached to the fatty acid chains of the oils to produce branched oils, i.e., b-HOSOY, b-RSOY, and b-WCO. The detailed kinetic study of each regular and modified sample was investigated using thermogravimetric analysis. The kinetic parameters, such as the activation energies, reaction rate, and pre-exponential factor, were generated via Friedman methods. The differential thermal gravimetric (DTG) analysis showed low volatilization at the onset temperature in each modified oil as compared with the unmodified samples under an oxidative environment. Furthermore, the comparative kinetic studies demonstrated the enhanced thermoxidative stability of the modified products relative to their unaltered counterparts. Among the tested oils, the b-RSOY showed an average activation energy of 325 kJ/mol, followed by the b-WCO: 300 kJ/mol and the b-HOSOY: 251 kJ/mol, indicating the most stable modified product under an oxidative environment. For all the samples, the pre-exponential factors were in good agreement with the activation energies, which validates that finding the pre-exponential components is crucial to the kinetic analysis.

Sarker, Majher I. (ORCID:0000000299509274)↗
DOE OSTI2024

Do Minihalos Affect Cosmic Reionization?

The role of unresolved structures (“minihalos”) in determining the consumption of ionizing photons during cosmic reionization remains an unsolved problem in modeling cosmic reionization, despite recent extensive studies with small-box high-resolution simulations by Park et al. and Chan et al., because the small-box studies are not able to fully sample all environments. In this paper these simulations are combined with large-box simulations from the “Cosmic Reionization On Computers” (CROC) project, allowing one to account for the full range of environments and to produce an estimate for the number of recombinations per hydrogen atom that are missed in large-scale simulations like CROC or Thesan. I find that recombinations in unresolved minihalos are unimportant compared to recombinations produced in large-scale cosmic structures and inside more massive, fully resolved halos. Since both the Park et al. and Chan et al. studies have severe limitations, the conclusions of this paper may need to be verified with more representative sets of small-box high-resolution simulations.

79 ASTRONOMY AND ASTROPHYSICS↗
NASA NTRS1970

Computer simulation of Saturn 5 response to pre-launch wind loads

A digital computer program is described which was developed to estimate Saturn 5 response to prelaunch wind conditions at Cape Kennedy. The program computes displacement and bending moment statistics as a function of parameters defining the atmospheric environment. A sample problem is provided to illustrate utilization of the program.

Coffin, T.↗
NASA NTRS1972

Documentation and environment of the Apollo 16 samples: A preliminary report

A catalog which is a working document that shows the locations from which samples were collected during the Apollo 16 mission, and that provides a descriptive geologic context for each sample is presented. It is a compilation of notes from work in progress, and supersedes an earlier report prepared by the Apollo Lunar Geology Investigation Team. The information was obtained from the Air-to-Ground transcript from the astronaut crew, from lunar surface television, from 60 mm Hasselblad camera photographs, and from available LRL mugshot photographs of the samples. The sample descriptions are based on these sources of data.

Source record↗
NASA NTRS1975

Demographic and psychological variables affecting test subject evaluations of ride quality

Ride-quality experiments similar in objectives, design, and procedure were conducted, one using the U.S. Air Force Total In-Flight Simulator and the other using the Langley Passenger Ride Quality Apparatus to provide the motion environments. Large samples (80 or more per experiment) of test subjects were recruited from the Tidewater Virginia area and asked to rate the comfort (on a 7-point scale) of random aircraft motion typical of that encountered during STOL flights. Test subject characteristics of age, sex, and previous flying history (number of previous airplane flights) were studied in a two by three by three factorial design. Correlations were computed between one dependent measure, the subject's mean comfort rating, and various demographic characteristics, attitudinal variables, and the scores on Spielberger's State-Trait Anxiety Inventory. An effect of sex was found in one of the studies. Males made higher (more uncomfortable) ratings of the ride than females. Age and number of previous flights were not significantly related to comfort ratings. No significant interactions between the variables of age, sex, or previous number of flights were observed.

Duncan, N. C.↗
NASA NTRS1989

Spectrograph Measures Contamination Of Optical Elements

Scanning-monochromator spectrograph designed to measure contamination on surfaces of optical elements as function of time. Repeatedly exposes samples to environment, then measures their transmittances or reflectances over range of wavelengths. Intended for use at vacuum-ultraviolet wavelengths to evaluate effects of outgassing, heating, and cooling on optical instruments. Principle of operation also applicable to spectral monitoring of time-dependent contamination at other wavelengths and in laboratory, industrial, or other settings.

Flint, Bruce K.↗
NASA NTRS1988

A schema-based model of situation awareness: Implications for measuring situation awareness

Measures of pilot situation awareness (SA) are needed in order to know whether new concepts in display design help pilots keep track of rapidly changing tactical situations. In order to measure SA, a theory of situation assessment is needed. Such a theory is summarized, encompassing both a definition of SA and a model of situation assessment. SA is defined as the pilot's knowledge about a zone of interest at a given level of abstraction. Pilots develop this knowledge by sampling data from the environment and matching the sampled data to knowledge structures stored in long-term memory. Matched knowledge structures then provide the pilot's assessment of the situation and serve to guide his attention. A number of cognitive biases that result from the knowledge matching process are discussed, as are implications for partial report measures of situation awareness.

Fracker, Martin L.↗
NASA NTRS1993

Proton irradiation on materials

A computer code is developed by utilizing a radiation transport code developed at NASA Langley Research Center to study the proton radiation effects on materials which have potential application in NASA's future space missions. The code covers the proton energy from 0.01 Mev to 100 Gev and is sufficient for energetic protons encountered in both low earth and geosynchronous orbits. With some modification, the code can be extended for particles heavier than proton as the radiation source. The code is capable of calculating the range, stopping power, exit energy, energy deposition coefficients, dose, and cumulative dose along the path of the proton in a target material. The target material can be any combination of the elements with atomic number ranging from 1 to 92, or any compound with known chemical composition. The generated cross section for a material is stored and is reused in future to save computer time. This information can be utilized to calculate the proton dose a material would receive in an orbit when the radiation environment is known. It can also be used to determine, in the laboratory, the parameters such as beam current of proton and irradiation time to attain the desired dosage for accelerated ground testing of any material. It is hoped that the present work be extended to include polymeric and composite materials which are prime candidates for use as coating, electronic components, and structure building. It is also desirable to determine, for ground testing these materials, the laboratory parameters in order to simulate the dose they would receive in space environments. A sample print-out for water subject to 1.5 Mev proton is included as a reference.

Chang, C. Ken↗
NASA NTRS2001

The Oxidation Kinetics of Continuous Carbon Fibers in a Cracked Ceramic Matrix Composite

Experimental observations and results suggest two primary regimes as a function of temperature, i.e., diffusion and reaction controlled kinetics. Thermogravimetric analysis of carbon fiber in flowing oxygen gave an activation energy of 64.1 kJ/mol in the temperature range of 500 to 600 C and an apparent activation energy of 7.6 kJ/mol for temperatures from 600 to 1400 C. When C/SiC composite material was unstressed, matrix effects at temperatures from 900 to 1400 C protected the internal fibers. When under stress, self-protection was not observed. Increasing the stress from 10 to 25 ksi caused a 67 to 82 percent reduction in times to failure at temperatures from 750 to 1500 C. Based on experimental results, observation, and theory, a finite difference model was developed, which simulates the diffusion of oxygen into a matrix crack that is bridged by carbon fibers. The model allows the influence of important variables on oxidation kinetics to be studied systematically, i.e., temperature, reaction rate constant, diffusion coefficient, environment, and sample geometry.

Halbig, Michael C.↗
NASA NTRS2004

Tracing Meteorites to Their Sources Through Asteroid Spectroscopy

The goal of tracing meteorites to their main-belt sources is seemingly impossible given the inherent uncertainties in relating astronomical remote sensing measurements of asteroids to laboratory measurements of meteorites. What's more, the chaotic routes for delivery of meteorites would seem to be sufficient to mask any trace of their points of origin. Yet reasonably compelling links can be made for the origin for two meteorite types: highly reduced enstatite achondrites (aubrites) appear to have a source from the inner most edge of the main-belt known as the Hungaria region; reduced basaltic achondrite howardite-eucrite-diogenite (HED) meteorites are plausibly derived from the large asteroid 4 Vesta. Beyond these specific examples, we seek to find additional evidence to more thoroughly pinpoint original locations for the much wider range of meteorite types and the oxidation environments they sample. A discussion on Near Earth asteroids along with CCD visible and near-infrared spectra observations are presented.

Binzel, R. P.↗
NASA NTRS2003

Life Detection and Characterization of Subsurface Ice and Brine in the McMurdo Dry Valleys Using an Ultrasonic Gopher: A NASA ASTEP Project

Evidence for the presence of ice and fluids near the surface of Mars in both the distant and recent past is growing with each new mission to the Planet. One explanation for fluids forming springlike features on Mars is the discharge of subsurface brines. Brines offer potential refugia for extant Martian life, and near surface ice could preserve a record of past life on the planet. Proven techniques to get underground to sample these environments, and get below the disruptive influence of the surface oxidant and radiation regime, will be critical for future astrobiology missions to Mars. Our Astrobiology for Science and Technology for Exploring Planets (ASTEP) project has the goal to develop and test a novel ultrasonic corer in a Mars analog environment, the McMurdo Dry valleys, Antarctica, and to detect and describe life in a previously unstudied extreme ecosystem; Lake Vida (Fig. 1), an ice-sealed lake.

Doran, P. T.↗
NASA NTRS2004

Microbial Characterization and Comparison of Isolates During the Mir and ISS Missions

Spacecraft represent a semi-closed ecosystem that provides a unique model of microbial interaction with other microbes, potential hosts, and their environment. Environmental samples from the Mir Space Station (1995-1998) and the International Space Station (ISS) (2000-Present) were collected and processed to provide insight into the characterization of microbial diversity aboard spacecraft over time and assess any potential health risks to the crew. All microbiota were isolated using standard media-based methodologies. Isolates from Mir and ISS were processed using various methods of analysis, including VITEK biochemical analysis, 16s ribosomal identification, and fingerprinting using rep-PCR analysis. Over the first 41 months of habitation, the diversity of the microbiota from air and surface samples aboard ISS increased from an initial six to 53 different bacterial species. During the same period, fungal diversity increased from 2 to 24 species. Based upon rep-PCR analysis, the majority of isolates were unique suggesting the need for increased sampling frequency and a more thorough analysis of samples to properly characterize the ISS microbiota. This limited fungal and bacterial data from environmental samples acquired during monitoring currently do not indicate a microbial hazard to ISS or any trends suggesting potential health risks.

Fontenot, Sondra L.↗