Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “breakdown”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 199 records · Page 11

Laser-induced gas breakdown - Spectroscopic and chemical studies.

Discussion of the results of several experimental investigations on laser-induced gas breakdown. The experiments included time-resolved spectroscopy, direct detection of H atoms with a TiO2 probe, and chemical reactions; each of them provided insight into the behavior of the medium at different times. Chemical reactions and explosions have been initiated by the laser beam when a plasma was created. No primary multiphotonic absorption and no macroscopic chemical reactions were observed below the breakdown threshold.

De Montgolfier, PH.↗

Ionizing potential waves and high-voltage breakdown streamers.

The structure of ionizing potential waves driven by a strong electric field in a dense gas is discussed. Negative breakdown waves are found to propagate with a velocity proportional to the electric field normal to the wavefront. This causes a curved ionizing potential wavefront to focus down into a filamentary structure, and may provide the reason why breakdown in dense gases propagates in the form of a narrow leader streamer instead of a broad wavefront.

Albright, N. W.↗

Solutions of the Navier-Stokes equations for vortex breakdown

Steady solutions of the Navier-Stokes equations, in terms of velocity and pressure, for breakdown in an unconfined viscous vortex are obtained numerically using the artificial compressibility technique of Chorin combined with an ADI finite-difference scheme. Axisymmetry is assumed and boundary conditions are carefully applied at the boundaries of a large finite region in an axial plane while resolution near the axis is maintained by a coordinate transformation. The solutions, which are obtained for Reynolds numbers up to 200 based on the free-stream axial velocity and a characteristic core radius, show that breakdown results from the diffusion and convection of vorticity away from the vortex core which, because of the strong coupling between the circumferential and axial velocity fields in strongly swirling flows, can lead to stagnation and reversal of the axial flow near the axis.

Grabowski, W. J.↗

Electron radiation effects on time-dependent dielectric breakdown in SiO2 films

An experiment testing the effect of ionizing radiation on breakdown characteristics of SiO2 films is presented. Silicon wafers were oxidized and metallized, and a capacitor array was etched into a control sample while the rest were first irradiated with 1 MeV electrons and then etched. Time-dependent dielectric tests were made on all the capacitors, and the average characteristics of 96 capacitors are illustrated graphically. The curves are consistent with the model of holes trapped in the SiO2 film during irradiation leading to a retarding field for positive ion emission and drift toward the interface. It is shown how an externally applied field is reduced by the trapped charge, and that changes in the dielectric breakdown properties of the SiO2 film after irradiation depend on the positive trapped charge near the metal interface.

Li, S. P.↗

RF voltage breakdown and the Paschen curve

A representation based on the similarity relations for voltage breakdown is shown to be useful in combining RF and dc voltage breakdown data. The representation for the uniform field geometry is given.

Woo, R.↗

A measurement technique of time-dependent dielectric breakdown in MOS capacitors

The statistical nature of time-dependent dielectric breakdown characteristics in MOS capacitors was evidenced by testing large numbers of capacitors fabricated on single wafers. A multipoint probe and automatic electronic visual display technique are introduced that will yield statistical results which are necessary for the investigation of temperature, electric field, thermal annealing, and radiation effects in the breakdown characteristics, and an interpretation of the physical mechanisms involved. It is shown that capacitors of area greater than 0.002 sq cm may yield worst-case results, and that a multipoint probe of capacitors of smaller sizes can be used to obtain a profile of nonuniformities in the SiO2 films.

Li, S. P.↗

Ion-implantation effect on time-dependent breakdown in SiO2

It was experimentally demonstrated that the field emission of positive ions from the metal SiO2 interface in MOS structures can be controlled by introducing a positive charge in a small ion-implantation dose to a shallow depth below the metal electrode. Considerable improvement of time-dependent breakdown was noted in structures implanted in this manner as opposed to nonimplanted ones. This experiment confirms the model proposed by Li and Maserjian (1975) for radiation effect on time-dependent breakdown.

Li, S. P.↗

Some experiments in swirling flows: Detailed velocity measurements of a vortex breakdown using a laser Doppler anemometer

The results of an experimental study of spiraling flows in a slightly diverging, circular duct are reported. Seven types of flow disturbances were observed. In addition to the spiral and axisymmetric vortex breakdowns and the double helix mode, four other forms were identified and are reported. The type and axial location of the disturbance depended on the Reynolds and circulation numbers of the flow. Detailed velocity measurements were made by using a laser Doppler anemometer. Measurements made far upstream of any disturbance showed that the introduction of swirl resulted in the formation of a high axial velocity jet centered around the vortex center. A mapping of the velocity field of a so-called axisymmetric breakdown, formed at a Reynolds number of 2560, revealed that the recirculation zone is a two-celled structure, with four stagnation points on the vortex axis marking the axial extremes of the concentric cells. The dominant feature of the flow inside the bubble was the strong, periodic velocity fluctuations. Existing theoretical models do not predict the two-celled structure and the temporal velocity fluctuations that were observed.

Faler, J. H.↗

An examination of a group-velocity criterion for the breakdown of an idealized vortex flow

The phenomenon of vortex breakdown is believed to be associated with a finite amplitude wave that has become trapped at the critical or breakdown location. The conditions at which the propagating waves become trapped at a certain axial location were examined by use of a group-velocity criterion implied by Landahl's general theory of wave trapping. An ideal vortex having constant vorticity and uniform axial velocity at the inlet of a slowly diverging duct was studied. The linear wave propagation analysis is applied to the base flow at several axial stations for several values of the ratio of swirl velocity to axial velocity at the inlet of the divergent duct, assuming a locally parallel flow. The dipsersion relations and hence the group velocities of both the symmetric (n = 0) and asymmetric modes (n = + or - 1) were investigated. The existence of a critical state in the flow (at which the group velocity vanishes), and its relationship to the stagnation point on the axis of the duct and to the occurrence of an irregular singularity in the equations governing wave propagation in the flow field are discussed.

Tsai, C. Y.↗

Model for MOS field-time-dependent breakdown

A quantitative model for MOS breakdown is derived and correlated with experiments. The data were obtained by enhancing the effect of ion emission on breakdown through controlled ion-implantation damage prior to gate oxidation in an otherwise normal and clean MOS process

Li, S. P.↗

Water-tunnel and analytical investigation of the effect of strake design variables on strake vortex breakdown characteristics

A systematic water-tunnel study was made to determine the vortex breakdown characteristics of 43 strakes. The strakes were mounted on a 1/2-scale model of a Langley Research Center general research fighter fuselage model with a 44deg leading-edge-sweep trapezoidal wing. The analytically designed strake shapes provided examples of the effects of the primary design parameters (size, span, and slenderness) on vortex breakdown characteristics. These effects were analyzed in relation to the respective strake leading-edge suction distributions. Included were examples of the effects of detailed strake planform shaping. It was concluded that, consistent with the design criterion, those strakes with leading-edge suction distributions which increase more rapidly near, and have a higher value at, the spanwise tip of the strake produce a more stable vortex.

Frink, N. T.↗

An analysis of strake vortex breakdown characteristics in relation to design features

This paper describes a water tunnel study of the vortex breakdown characteristics of a large number of analytically designed vortex strakes tested in combination with a moderate aspect ratio trapezoidal wing. A wide range of strake sizes and slenderness ratios are covered, and examples of the effects of the primary design parameters of size, span, and slenderness on the vortex breakdown characteristics are presented and analyzed in relation to the leading-edge suction distributions. Several examples of detailed planform shaping on strakes of the same general size and slenderness are shown from which it can be concluded that, consistent with the design criterion, those with leading-edge suction distributions which increase more rapidly near, and have a higher value at, the spanwise tip of the strake produce a more stable vortex.

Frink, N. T.↗

Prediction of field-time-dependent gate-oxide breakdown in MOS devices

The model for field-time-dependent breakdown in the gate oxide of MOS devices is extended and verified with experimental data. The model permits accelerated tests at high fields which can be used to predict gate-oxide breakdowns at much longer times at normal operating fields.

Li, S. P.↗

Breakdown voltage of discrete capacitors under single-pulse conditions

For electrostatic capacitors the breakdown voltage is inherently related to the properties of the dielectric, with the important parameters being the dielectric field strength which is related to the dielectric constant and the dielectric thickness. These are not necessarily related to the capacitance value and the rated voltage, but generally the larger values of capacitance have lower breakdown voltages. Foil and wet slug electrolytics can withstand conduction currents pulses without apparent damage (in either direction for foil types). For solid tantalums, damage occurs whenever the capacitor charges to the forming voltage.

Domingos, H.↗

Thermal dielectric breakdown with cylindrical electrodes

Solutions to the equations of thermal breakdown are computed for cylindrial electrodes with different boundary conditions. The development of the electric field and the temperature distributions are followed as functions of time, consequent on the application of a constant interelectrode voltage. The implications for possible breakdown by modes other than thermal are briefly discussed.

Beers, B. L.↗

Laboratory experience with voltage breakdown

Voltage breakdown failures in photovoltaic module electrical insulations lead to loss of entire source circuits and require costly maintenance and replacement. Avoiding such catastrophes requires that modules be designed so that voltage breakdown either never occurs or occurs so rarely that it affects the least life cycle energy costs insignificantly. To achieve this desired balance of cost and reliability, the module design engineer must understand the failure mechanisms and use data on materials and failue rates to suppress or retard them. Recently obtained failure mechanism information, rate data and materials property data and a qualitative model of module failure prediction are presented.

Mon, G. R.↗

Calculations of the stability of some axisymmetric flows proposed as a model of vortex breakdown

The term vortex breakdown refers to the abrupt and drastic changes of structure that can sometimes occur in swirling flows. It was conjectured that the bubble type of breakdown can be viewed as an axisymmetric wave traveling upstream in a primarily columnar vortex flow. In this scenario the wave's upstream progress is impeded only when it reaches a critical amplitude and it loses stability to some nonaxisymmetric disturbance. The stability of some axisymmetric wavy flows to three dimensional disturbances, viewing the amplitude of the wave as a bifurcation parameter is examined. The stability of a set of related columnar vortex flows, constructed by taking the two dimensional flow at a single axial location and extending it throughout the domain without variation, is investigated. The method used will be to expand the perturbation velocity in a series of divergence free vectors which ensures that the continuity equation for the incompressible fluid is satisfied exactly by the computed velocity field. Projections of the stability equation onto the space of inviscid vector fields eliminated the pressure term from the equation and reduces the differential eigen problem to a generalized matrix eigen problem. Results are presented both for the one dimensional, columnar vortex flows and also for the wavy bubble flow.

Mhuiris, N. M. G.↗