Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “Random Effects”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,801 records · Page 100
All sourcesNASA NTRSDOE OSTI
NASA NTRS1999

A Comparison of Cilostazol and Pentoxifylline for Treating Intermittent Claudication

A randomized, double-blind, placebo-controlled, parallel-group, phase III multicenter trial was performed to evaluate the relative efficacy and safety of cilostazol and pentoxifylline. The study included 54 outpatient vascular clinics, including sites at Air Force, Veterans Affairs, tertiary care, and university hospitals in the United States. Of 922 consenting patients, 698 met the inclusion criteria, were randomized, and received treatment with either cilostazol 100 mg P0 twice a day, pentoxifylline 400 mg PO 3 times a day, or placebo. Treatment was double-dummy to ensure study blindness. Efficacy was primarily established by maximal walking distance (MWD), measured with constant-speed, variable-grade treadmill testing, assessed at baseline and at 4, 8, 12, 16, 20, and 24 weeks. Mean MWD of cilostazol-treated patients (n=227) was significantly improved at every visit compared with patients who received pentoxifylline (n=232) or placebo (n=239). After 24 weeks of cilostazol, mean MWD increased 53.9% (107.3 m) from baseline, and the effect had not plateaued. This was better (P < 0.001) than the 30.4% (64.4 m) MWD improvement with pentoxifylline. MWD improvement with pentoxifylline was similar (P = 0.82) to that of placebo (64.7 m). Deaths and serious adverse event rates were similar in each group. Common side effects included headache (27.8% with cilostazol, 11.2% with pentoxifylline, 11.7% with placebo), palpitations (17.2% with cilostazol, 2.2% with pentoxifylllne, 1.3% with placebo), and abnormal stools. Cilostazol was significantly better than pentoxifylline or placebo for increasing walking distances; pentoxifylline was no better than placebo.

Dawson, David L.↗
NASA NTRS2004

NASA Classroom Bioreactor

Exploration of space provides a compelling need for cell-based research into the basic mechanisms that underlie the profound changes that occur in terrestrial life that is transitioned to low gravity environments. Toward that end, NASA developed a rotating bioreactor in which cells are cultured while continuously suspended in a cylinder in which the culture medium rotates with the cylinder. The randomization of the gravity vector accomplished by the continuous rotation, in a low shear environment, provides an analog of microgravity. Because cultures grown in bioreactors develop structures and functions that are much closer to those exhibited by native tissue than can be achieved with traditional culture methods, bioreactors have contributed substantially to advancing research in the fields of cancer, diabetes, infectious disease modeling for vaccine production, drug efficacy, and tissue engineering. NASA has developed a Classroom Bioreactor (CB) that is built from parts that are easily obtained and assembled, user-friendly and versatile. It can be easily used in simple school settings to examine the effect cultures of seeds or cells. An educational brief provides assembly instructions and lesson plans that describes activities in science, math and technology that explore free fall, microgravity, orbits, bioreactors, structure-function relationships and the scientific method.

Scully, Robert↗
NASA NTRS1972

A simulation study exploring the effects of sensor spatial resolution on estimates of cloud cover from satellites.

Investigation of the effects of sensor spatial resolution on estimating the amount of clouds covering the earth by simulating various cloud distributions and sizes, and measuring the known cloud amount with resolution of different sizes using a cloud-no cloud threshold technique often applied in automatic data processing. Cloud amount statistics have been tabulated for a three-orders-of-magnitude range in the ratio (R) of areal cloud size to areal resolution size for seven cloud amounts between 6 and 90%. Three different cloud patterns were used. These were 1) a regularly spaced pattern of homogeneous dots arranged in rows and columns (to simulate cloud streets), 2) a randomly spaced pattern of the same dots (to simulate randomly oriented cumulus clouds), and 3) a heterogeneous cloud size distribution irregularly spaced (to simulate a view of different cloud types and sizes). Two cloud amount estimation techniques were tested. Cloud amounts of 100% (method 1) and 50% (method 2) were assigned to partially filled resolution elements. Using criteria applicable to some studies carried out in the past, it is shown that cloud amount estimations can be in error by as much as 86 and 38%, respectively, for the two methods. Nomograms have been developed which subtantially improve the estimate of the true cloud cover for R less than 100, provided that R can be determined.

Shenk, W. E.↗
NASA NTRS1994

Orthostatic responses to dietary sodium restriction during heat acclimation

Several studies have shown that individuals consuming low-salt diets and working in the heat have an increased risk or incidence of heat injury, suggestive of inadequate cardiovascular adjustment. Furthermore, others have shown that prolonged work in hot climates can precipitate orthostatic hypotension and syncope. This study was designed to evaluate the effects of moderate-salt (MS) and low-salt (LS) diets on the circulatory responses and incidence of presyncopal symptoms to an orthostatic test (OT) during successive days of heat acclimation (HA). Seventeen unacclimatized male soldiers (mean +/- SE: age 20+/-1 yrs) participated in this two-phase study. The first phase consisted of a seven day dietary stabilization period during which all subjects consumed similar diets of about 4000 kcal/day containing 8g NaCl and lived in a dormitory setting (21 C, 30% RH). The second phase commenced on day eight and consisted of dietary NaCl restriction and 10 days HA (days 8-17). Volunteers were randomly assigned to either the MS diet (n=9) providing 8g NaCl/day or the LS diet (n=8) furnishing just 4g NaCl/day. The acquisition of HA was manifested in both groups by reductions in exercising rectal temperature and heart rate (HR); these characteristics were similar in the MS and LS diets. The OT was performed at 21 C on day seven of the stabilization phase and on days 9, 11, 13, 15, and 17 of the HA phase, before and after 8.5 hr of intermittent treadmill walking in a hot environment. Blood pressure (BP) and HR responses at 1,2, and 4 min and any presyncopal symptoms were recorded after assuming an upright position from recumbency. All subjects completed the OT before and after prolonged exercise in the heat without incidence of either hypotension or presyncopal symptoms irrespective of dietary-salt intake and day of HA. The results indicate that the prolonged work in the heat can be performed without orthostatic hypotension or syncope while consuming 4g NaCl/day with adequate fluid replacement. Furthermore, the circulatory responses to OT showed no improvement with successive days of HA irrespective of dietary-salt intake.

Szlyk, Patricia C.↗
NASA NTRS2001

Context-dependent arm pointing adaptation

We sought to determine the effectiveness of head posture as a contextual cue to facilitate adaptive transitions in manual control during visuomotor distortions. Subjects performed arm pointing movements by drawing on a digitizing tablet, with targets and movement trajectories displayed in real time on a computer monitor. Adaptation was induced by presenting the trajectories in an altered gain format on the monitor. The subjects were shown visual displays of their movements that corresponded to either 0.5 or 1.5 scaling of the movements made. Subjects were assigned to three groups: the head orientation group tilted the head towards the right shoulder when drawing under a 0.5 gain of display and towards the left shoulder when drawing under a 1.5 gain of display; the target orientation group had the home and target positions rotated counterclockwise when drawing under the 0.5 gain and clockwise for the 1.5 gain; the arm posture group changed the elbow angle of the arm they were not drawing with from full flexion to full extension with 0.5 and 1.5 gain display changes. To determine if contextual cues were associated with display alternations, the gain changes were returned to the standard (1.0) display. Aftereffects were assessed to determine the efficacy of the head orientation contextual cue compared to the two control cues. The head orientation cue was effectively associated with the multiple gains. The target orientation cue also demonstrated some effectiveness while the arm posture cue did not. The results demonstrate that contextual cues can be used to switch between multiple adaptive states. These data provide support for the idea that static head orientation information is a crucial component to the arm adaptation process. These data further define the functional linkage between head posture and arm pointing movements.

Clinical Trial↗
NASA NTRS2013

Empirical Study of the Multiaxial, Thermomechanical Behavior of NiTiHf Shape Memory Alloys

An empirical study was conducted to characterize the multiaxial, thermomechanical responses of new high temperature NiTiHf alloys. The experimentation included loading thin walled tube Ni(sub 50.3)Ti(sub 29.7)Hf(sub 20) alloy samples along both proportional and nonproportional axial-torsion paths at different temperatures while measuring surface strains using stereo digital image correlation. A Ni(sub 50.3)Ti(sub 33.7)Hf(sub 16) alloy was also studied in tension and compression to document the effect of slightly depleting the Hf content on the constitutive responses of NiTiHf alloys. Samples of both alloys were made from nearly texture free polycrystalline material processed by hot extrusion. Analysis of the data shows that very small changes in composition significantly alter NiTiHf alloy properties, as the austenite finish (Af) temperature of the 16-at Hf alloy was found to be approximately 60 C less than the 20-at Hf alloy (approximately 120 C vs. 180 C). In addition, the 16-at Hf alloy exhibited smaller compressive transformation strains (2 vs. 2.5 percent). Multi-axial characterization of the 20-at % Hf alloy showed that while the random polycrystal transformation strains in tension (4 percent) and compression (2.5 percent) are modest in comparison with binary NiTi (6 percent, 4 percent), the torsion performance is superior (7 vs. 4 shear strain width to the pseudoelastic plateau).

tensile deformation↗
NASA NTRSDate not supplied

TPSAS-NF1676L-23557-DND

The Cloud-Aerosol LIdar with Orthogonal Polarization (CALIOP) measures both parallel and perpendicular backscatter of linearly polarized 532 nm light from cloud particles in the atmosphere. The perpendicular component of the return signal allows differentiation between cloud layers consisting of spherical water droplets from those with non-spherical ice particles. A two-way distribution of layer-integrated 532 nm total backscatter and the layer-integrated 532 nm depolarization ratio further differentiates between water cloud layers with significant multiple scattering, horizontally-oriented ice particles that cause specular reflections, and randomly-oriented ice particles, as described in Hu et al., 2009. The cloud phase algorithm functions well for the majority of clouds, but there have been some recent changes and improvements that are described in this poster. The impact of the CALIOP viewing angle change from near-nadir (0.3 degrees) to slightly tilted (3.0 degrees) on the optical properties of the various CALIOP cloud particle phases is also shown. A major improvement to the phase algorithm is the limitation of a spatial coherence test for horizontally-oriented ice to cloud layers that have sufficient integrated attenuated backscatter to likely contain HOI. This change reduces a "striping" effect caused by noisiness in the spatial coherence test for thin cloud layers. Additional temperature tests are considered, and the regional and vertical distribution of cloud layers with the various CALIOP cloud phases is shown. Only one cloud particle phase is allowed for each 5 km portion of a cloud layer that is considered by the cloud phase algorithm, so we use in situ aircraft and CloudSat observations to determine how the CALIOP cloud phase algorithm is treating optically and thermally thick clouds, which may be mixed-phase.

Melody Avery↗
NASA NTRS1992

Load redistribution considerations in the fracture of ceramic matrix composites

Using a macroscopic viewpoint, composite laminae are homogeneous orthotropic solids whose directional strengths are random variables. Incorporation of these random variable strengths into failure models, either interactive or noninteractive, allows for the evaluation of the lamina reliability under a given stress state. Using a noninteractive criterion for demonstration purposes, laminate reliabilities are calculated assuming previously established load sharing rules for the redistribution of load as the failure of laminae occur. The matrix cracking predicted by ACK theory is modeled to allow a loss of stiffness in the fiber direction. The subsequent failure in the fiber direction is controlled by a modified bundle theory. Results are compared with previous models which did not permit separate consideration of matrix cracking, as well as to results obtained from experimental data. The effects of variations from the ideal physical geometry which is normally used to depict the matrix cracking are also studied.

Thomas, David J.↗
NASA NTRS2000

Combined dietary and exercise intervention for control of serum cholesterol in the workplace

PURPOSE: To elucidate a potential combined dietary and exercise intervention affect on cardiovascular risk reduction of the National Aeronautics and Space Administration Headquarters employees. DESIGN: A nonexperimental, longitudinal, clinical-chart review study (1987 to 1996) of an identified intervention group and a reference (not a control) group. SETTING: The study group worked in an office environment and participated in the annual medical examinations. SUBJECTS: An intervention group of 858 people with initially elevated serum cholesterol, and a reference group of 963 people randomly sampled from 10% of the study group. MEASURES: Serum cholesterol data were obtained for both groups, respectively, from pre- and postintervention and annual examinations. The reference group was adjusted by statistical exclusion of potential intervention participants. Regression equations (cholesterol vs. study years) for the unadjusted/adjusted reference groups were tested for statistical significance. INTERVENTION: An 8-week individualized, combined dietary and exercise program was instituted with annual follow-ups and was repeated where warranted. RESULTS: Only the unadjusted (but not the adjusted) reference group with initial mean total serum cholesterol levels above 200 mg/dL shows a significant 9-year decline trend and significant beta coefficient tests. An intervention effect is suggested. Mean high density lipoprotein cholesterol rose slightly in the intervention group but was maintained in the reference group. CONCLUSION: With potential design limitations, the NASA intervention program focusing on a high risk group may be associated to some degree, if not fully, with an overall cardiovascular risk profile improvement.

Occupational Health Services↗
NASA NTRS1974

Development of modified vibration test criteria for qualifying space vehicle components

Simplified methods are described to estimate the test criteria of primary structures at component attachment points subjected to broadband random acoustic excitations. The current method utilizes a constant smeared component mass attenuation factor across the frequency range of interest. The developed method indicates that the attenuation factor is based on a frequency dependent ratio of the mechanical impedances of both the component and primary structures. The procedures used to predict the structural responses are considered as the present state-of-the-art and provide satisfactory prediction results. Example problems are used to illustrate the application procedures of the two methods and to compare the significant difference. It was found that the lower test criteria obtained by the impedance ratio method is due to the results of considering the effects of component/primary structure interaction.

Chang, K. Y.↗
NASA NTRS1995

Bayes classification of interferometric TOPSAR data

We report the Bayes classification of terrain types at different sites using airborne interferometric synthetic aperture radar (INSAR) data. A Gaussian maximum likelihood classifier was applied on multidimensional observations derived from the SAR intensity, the terrain elevation model, and the magnitude of the interferometric correlation. Training sets for forested, urban, agricultural, or bare areas were obtained either by selecting samples with known ground truth, or by k-means clustering of random sets of samples uniformly distributed across all sites, and subsequent assignments of these clusters using ground truth. The accuracy of the classifier was used to optimize the discriminating efficiency of the set of features that was chosen. The most important features include the SAR intensity, a canopy penetration depth model, and the terrain slope. We demonstrate the classifier's performance across sites using a unique set of training classes for the four main terrain categories. The scenes examined include San Francisco (CA) (predominantly urban and water), Mount Adams (WA) (forested with clear cuts), Pasadena (CA) (urban with mountains), and Antioch Hills (CA) (water, swamps, fields). Issues related to the effects of image calibration and the robustness of the classification to calibration errors are explored. The relative performance of single polarization Interferometric data classification is contrasted against classification schemes based on polarimetric SAR data.

Michel, T. R.↗
NASA NTRS2023

Polar Firn Properties in Greenland and Antarctica and Related Effects on Microwave Brightness Temperatures

In studying the mass balance of polar ice sheets, fluctuations of firn density near the surface is a major uncertainty. In this paper, we explore these variations at locations in the Greenland Ice Sheet and at the Dome C location in Antarctica. Borehole in situ measurements, Snow Radar echoes, microwave brightness temperatures, and modelling results from the Community firn model (CFM) are used. It is shown that firn density profiles can be represented using 3 processes: “long” and “short” length scale density variations and “refrozen layers”. Consistency with this description is observed in the dynamic range of airborne 0.5-2 GHz brightness temperatures and Snow Radar echo peaks in measurements performed in Greenland in 2017. Based on these insights, a new analytical partially coherent model is implemented to explain the microwave brightness temperatures using the three scale description of the firn. Short and long scale firn processes are modelled as a 3D continuous random medium with finite vertical and horizontal correlation lengths as opposed to past 1D random layered medium descriptions. Refrozen layers are described as deterministic sheets with planar interfaces, with the number of refrozen layer interfaces determined by radar observations. Firn density and correlation length parameters used in forward modelling to match measured 0.5-2 GHz brightness temperatures in Greenland show consistency with similar parameters in CFM predictions. Model predictions also are in good agreement with multi-angle 1.4 GHz vertically and horizontally polarized brightness temperature measured by the SMOS satellite at DOME C, Antarctica. This work shows that co-located active and passive microwave measurements can be used to infer polar firn properties that can be compared with predictions of the CFM. In particular, 0.5-2 GHz brightness temperature measurements are shown to be sensitive to long scale firn density fluctuations with density standard deviations in the range 0.01-0.06 g/cm^3 and vertical correlation lengths of 6-20 cm.

Haokui Xu↗
NASA NTRS1996

Waveform Perturbations os Spherical Transiet Waves Propagating in a Random Medium

Of those aspects of sonic-boom propagation that are not yet fully understood, one of the more important is that which relates to the perturbations of the waveform. This phenomenon, which arises also in connection with the propagation of other types of transient waves in real media, generally take the form, in the case of sonic-boom N-waves, of a random high-frequency structure (sometimes called fine structure) that is most prominent in the regions immediately behind each of the shocks. The perturbations in those regions can be large, occasionally attaining magnitudes comparable to that of th incident wave itself. Such magnitudes, in combination with the high-frequency character of the perturbations, can lead to a considerable increase in the perceived noisiness of the sonic boom. Waveform perturbations are consequently an important factor as regards the question of sonic-boom acceptability. On the basis of observations, and some early theoretical studies, it is now generally accepted that perturbations of sonic-boom waveforms are a manifestation of the effect on the propagating wave of relatively small-scale variations in the acoustic properties of the atmosphere- variations that are usually associated with turbulence. Although the mechanism underlying perturbations of sonic-boom waveforms seems thus to be well understood, no fully-satisfactory theory of such perturbations has emerged. Indeed, even for the relatively simple case of an incident step-function pulse, no theory of waveform perturbations, formulated in a realistic three-dimensional context, has been advanced that is valid in the region of strongest perturbations; viz., the region immediately behind, and including, the wave front. The work reported herein represents an attempt to develop such a theory.

Wenzel, Alan R.↗
NASA NTRS1994

Integrated active and passive control design methodology for the LaRC CSI evolutionary model

A general design methodology to integrate active control with passive damping was demonstrated on the NASA LaRC CSI Evolutionary Model (CEM), a ground testbed for future large, flexible spacecraft. Vibration suppression controllers designed for Line-of Sight (LOS) minimization were successfully implemented on the CEM. A frequency-shaped H2 methodology was developed, allowing the designer to specify the roll-off of the MIMO compensator. A closed loop bandwidth of 4 Hz, including the six rigid body modes and the first three dominant elastic modes of the CEM was achieved. Good agreement was demonstrated between experimental data and analytical predictions for the closed loop frequency response and random tests. Using the Modal Strain Energy (MSE) method, a passive damping treatment consisting of 60 viscoelastically damped struts was designed, fabricated and implemented on the CEM. Damping levels for the targeted modes were more than an order of magnitude larger than for the undamped structure. Using measured loss and stiffness data for the individual damped struts, analytical predictions of the damping levels were very close to the experimental values in the (1-10) Hz frequency range where the open loop model matched the experimental data. An integrated active/passive controller was successfully implemented on the CEM and was evaluated against an active-only controller. A two-fold increase in the effective control bandwidth and further reductions of 30 percent to 50 percent in the LOS RMS outputs were achieved compared to an active-only controller. Superior performance was also obtained compared to a High-Authority/Low-Authority (HAC/LAC) controller.

Voth, Christopher T.↗
NASA NTRS2011

Acquisition of Skill Proficiency Over Multiple Sessions of a Novel Rover Simulation

Following long-duration exploration transits, adaptive changes in sensorimotor function may impair the crew's ability to safely perform manual control tasks such as operating pressurized rovers. Postflight performance will also be influenced by the level of preflight skill proficiency they have attained. The purpose of this study was to characterize the acquisition of skills in a motion-based rover simulation over multiple sessions, and to investigate the effects of varying the simulation scenarios. METHODS: Twenty healthy subjects were tested in 5 sessions, with 1-3 days between sessions. Each session consisted of a serial presentation of 8 discrete tasks to be completed as quickly and accurately as possible. Each task consisted of 1) perspective-taking, using a map that defined a docking target, 2) navigation toward the target around a Martian outpost, and 3) docking a side hatch of the rover to a visually guided target. The simulator utilized a Stewart-type motion base (CKAS, Australia), single-seat cabin with triple scene projection covering 150 deg horizontal by 50 deg vertical, and joystick controller. Subjects were randomly assigned to a control group (tasks identical in the first 4 sessions) or a varied-practice group. The dependent variables for each task included accuracy toward the target and time to completion. RESULTS: The greatest improvements in time to completion occurred during the docking phase. The varied-practice group showed more improvement in perspective-taking accuracy. Perspective-taking accuracy was also affected by the relative orientation of the rover to the docking target. Skill acquisition was correlated with self-ratings of previous gaming experience. DISCUSSION: Varying task selection and difficulty will optimize the preflight acquisition of skills when performing novel operational tasks. Simulation of operational manual control will provide functionally relevant evidence regarding the impact of sensorimotor adaptation on early surface operations and what countermeasures are needed. Learning Objective: The use of a motion-based simulation to investigate decrements in the proficiency to operate pressurized rovers during early surface operations of space exploration missions, along with the acquisition of skill proficiency needed during the preflight phase of the mission.

Dean, S. L.↗
NASA NTRS2014

Global-Scale Comparison of Passive (SMOS) and Active (ASCAT) Satellite Based Microwave Soil Moisture Retrievals with Soil Moisture Simulations (MERRA-Land)

Global surface soil moisture (SSM) datasets are being produced based on active and passive microwave satellite observations and simulations from land surface models (LSM). This study investigates the consistency of two global satellite-based SSM datasets based on microwave remote sensing observations from the passive Soil Moisture and Ocean Salinity (SMOS;SMOSL3 version 2.5) and the active Advanced Scatterometer (ASCAT; version TUWien- WARP 5.5) with respect to LSM SSM from the MERRA-Land data product. The relationship between the global-scale SSM products was studied during the 2010-2012 period using (1) a time series statistics (considering both original SSM data and anomalies), (2) a space-time analysis using Hovmoller diagrams, and (3) a triple collocation error model. The SMOSL3 and ASCAT retrievals are consistent with the temporal dynamics of modeled SSM (correlation R (is) greater than 0.70 for original SSM) in the transition zones between wet and dry climates, including the Sahel, the Indian subcontinent, the Great Plains of North America, eastern Australia, and southeastern Brazil. Over relatively dense vegetation covers, a better consistency with MERRA-Land was obtained with ASCAT than with SMOSL3. However, it was found that ASCAT retrievals exhibit negative correlation versus MERRA-Land in some arid regions (e.g., the Sahara and the Arabian Peninsula). In terms of anomalies, SMOSL3 better captures the short term SSM variability of the reference dataset (MERRA-Land) than ASCAT over regions with limited radio frequency interference (RFI) effects (e.g., North America, South America, and Australia). The seasonal and latitudinal variations of SSM are relatively similar for the three products, although the MERRALand SSM values are generally higher and their seasonal amplitude is much lower than for SMOSL3 and ASCAT. Both SMOSL3 and ASCAT have relatively comparable triple collocation errors with similar spatial error patterns: (i) lowest errors in arid regions (e.g., Sahara and Arabian Peninsula), due to the very low natural variability of soil moisture in these areas, and Central America, and (ii) highest errors over most of the vegetated regions (e.g., northern Australia, India, central Asia, and South America). However, the ASCAT SSM product is prone to larger random errors in some regions (e.g., north-western Africa, Iran, and southern South Africa). Vegetation density was found to be a key factor to interpret the consistency with MERRA-Land between the two remotely sensed products (SMOSL3 and ASCAT) which provides complementary information on SSM. This study shows that both SMOS and ASCAT have thus a potential for data fusion into long-term data records.

ASCAT↗
NASA NTRSDate not supplied

Upscaling of 500 °C Durable SiC JFET-R Integrated Circuits

At HiTEC 2018, NASA Glenn Research Center reported the first demonstration of yearlong 500 °C operation of ceramic-packaged “Generation 10” ~200-transistor integrated circuits (ICs) based on two-level interconnect silicon carbide (4H-SiC) junction field effect transistors and resistors (JFET-R). This HiTEC 2021 submission updates on-going efforts at NASA Glenn spanning two subsequent prototype IC generations “11 and 12” to increase both complexity and durability of these ICs. Increased chip complexities of around 1000 transistors/chip for Gen. 11 and near 3000 transistors/chip for Gen. 12 are made possible by reductions in minimum layout feature sizes (including resistor width shrinkage from 6 µm to 2 µm) coupled with enlarged die size (from 3 x 3 mm to 5 x 5 mm). Gen. 11 ICs electrically tested to date include an 8-bit delta-sigma analog to digital converter (ADC) as well as upscaled random access memory (RAM) and nearly 1 kbit read only memory (ROM). However, Gen. 11 prototype ICs exhibited significantly lower yield and durability than Gen. 10 ICs. Development of revised processing is being investigated towards mitigating these issues in subsequent Gen. 12 fabrication run currently in progress.

silicon carbide↗
NASA NTRSDate not supplied

Where Lies the Quantumness Behind Detecting Electromagnetic Waves for Frequencies from Infrared and Up?

The synthesis of Newtonian concept of corpuscles during emission with Huygens’ concept of secondary-wavelets during propagation implies that all EM radiations from quantized atoms and molecules are released as discrete amount of energies. However, they propagate out as time-finite Maxwellian light pulses. Huygens also underscored that his secondary wavelets keep propagating as independent pulses in the absence of any interacting medium, or until intercepted by an interface with a medium or a detector. Then we use the Superposition Principle and the coherence theory to derive Einstein’s photoelectric equation by summing innumerable random time-finite pulses. This process driven approach should yield the characteristic statistical variations of photoelectron current pulses, as generated by photodetectors for different kinds of light sources. Lamb & Scully originally proposed this semiclassical approach without assuming that light actually consists of time finite pulses. The quantumness remains confined within the excitation and de-excitations processes in the material particles.

Electromagnetic Waves↗

Refine your search to explore more results.