Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “variable conductance”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 181 records · Page 10
All sourcesNASA NTRSDOE OSTI
NASA NTRS2013

Comprehensive Modeling and Analysis of Rotorcraft Variable Speed Propulsion System With Coupled Engine/Transmission/Rotor Dynamics

This project develops comprehensive modeling and simulation tools for analysis of variable rotor speed helicopter propulsion system dynamics. The Comprehensive Variable-Speed Rotorcraft Propulsion Modeling (CVSRPM) tool developed in this research is used to investigate coupled rotor/engine/fuel control/gearbox/shaft/clutch/flight control system dynamic interactions for several variable rotor speed mission scenarios. In this investigation, a prototypical two-speed Dual-Clutch Transmission (DCT) is proposed and designed to achieve 50 percent rotor speed variation. The comprehensive modeling tool developed in this study is utilized to analyze the two-speed shift response of both a conventional single rotor helicopter and a tiltrotor drive system. In the tiltrotor system, both a Parallel Shift Control (PSC) strategy and a Sequential Shift Control (SSC) strategy for constant and variable forward speed mission profiles are analyzed. Under the PSC strategy, selecting clutch shift-rate results in a design tradeoff between transient engine surge margins and clutch frictional power dissipation. In the case of SSC, clutch power dissipation is drastically reduced in exchange for the necessity to disengage one engine at a time which requires a multi-DCT drive system topology. In addition to comprehensive simulations, several sections are dedicated to detailed analysis of driveline subsystem components under variable speed operation. In particular an aeroelastic simulation of a stiff in-plane rotor using nonlinear quasi-steady blade element theory was conducted to investigate variable speed rotor dynamics. It was found that 2/rev and 4/rev flap and lag vibrations were significant during resonance crossings with 4/rev lagwise loads being directly transferred into drive-system torque disturbances. To capture the clutch engagement dynamics, a nonlinear stick-slip clutch torque model is developed. Also, a transient gas-turbine engine model based on first principles mean-line compressor and turbine approximations is developed. Finally an analysis of high frequency gear dynamics including the effect of tooth mesh stiffness variation under variable speed operation is conducted including experimental validation. Through exploring the interactions between the various subsystems, this investigation provides important insights into the continuing development of variable-speed rotorcraft propulsion systems.

DeSmidt, Hans A.↗
NASA NTRS1974

External insulation systems for cryogenic storage systems. Volume 1: Optical properties of Kapton and report of process variable study

Investigations are conducted into the optical properties of the glass and Kapton substrate materials, and three variables were chosen: deposition rate, sputter gas pressure, and film contamination time. Substrate tests have shown that fabrication of an dielectric broadband reflector would require an extremely complex and expensive filter design.

Frank, A. M.↗
NASA NTRS1989

Relativistic magnetospheric electrons: Lower ionospheric conductivity and long-term atmospheric variability

Long term observations of relativistic electrons in the earth's outer magnetosphere show a strong solar cycle dependence with a prominent intensity maximum during the approach to solar minimum. This population therefore closely corresponds to the presence of high speed solar wind streams emanating from solar coronal holes. Using a numerical code, the precipitating electron energy deposition in the earth's upper and middle atmosphere were calculated. Observed events (typically persisting several days) would have maximum effect in the 40 to 60 km altitude range with peak energy depositions greater than 110 keV/cu cm-s. It is suggested that this electron population could play an important long term role in modulating lower D region ionization and middle atmospheric ozone chemistry. Methods are described of observing middle atmospheric and lower ionospheric effects of the electrons including balloon, riometer, and space-based ozone sensor systems. A particularly promising approach may involve the monitoring of global Schumann resonance modes which are sensitive to global changes in the properties of the earth-ionosphere cavity. Present work indicates that Schumann resonance properties are moderately correlated with the flux of precipitating relativistic electrons thus offering the possibility of continuously monitoring this aspect of magnetosphere-atmosphere coupling.

Baker, D. N.↗
NASA NTRSDate not supplied

Mixed-Domain Charge Transport in the S-Se System from First Principles

Lithium-sulfur (Li-S) batteries are emerging systems heralded for the inexpensive cathode component (in S)and higher energy density than that of typical Li-ion batteries [1–5]. For the latter reason in particular, they are drawing high levels of interest for long-range electric air-craft applications where high gravimetric energy density is of utmost importance. Unfortunately, S by itself has a much too low electrical conductivity to be useful asa stand-alone cathode material. One effort to alleviate these shortcomings is to alloy sulfur with selenium [6–13],which is expected to improve the paltry conductivity of S as Se, depending on the phase, is 10∼30 times more conductive. This, however, comes at the cost of the heavier mass of Se that works against the gravimetric energy density. The charge transport behavior in the S1−xSex alloy system, not yet fully known or understood, is necessary for one to navigate the trade-offs between conductivity and other variables such as energy density en route to ultimately determining the optimum Se content, on demand. Charting carrier mobilities and conductivities in the S-Se system throughout the compositional spectrum from first principles at a predictive level is therefore critical.

Junsoo Park↗
NASA NTRS1979

Variability of annoyance response due to aircraft noise

An investigation was conducted to study the variability in the response of subjects participating in noise experiments. This paper presents a description of a model developed to include this variability which incorporates an aircraft-noise adaptation level or an annoyance calibration for each individual. The results indicate that the use of an aircraft-noise adaption level improved prediction accuracy of annoyance responses (and simultaneously reduced response variation).

Dempsey, T. K.↗
NASA NTRS2024

Inertia of Ionospheric Conductance During Electron Precipitation Events

Using the SuperThermal Electron Transport (STET) model coupled with the Super‐thermal Proton Electron Atomic Hydrogen—tRansport in the Ionosphere and Thermosphere (SPEAH‐RIT) codes, we demonstrate that temporal variability of ionospheric conductance is defined by several time scales: the temporal variations of the magnetospheric source, the start time of electron precipitation, and the termination of the corresponding source. In these cases, the time scales are defined by dissipation of energetic electrons and effective recombination processes. The results presented in this paper were applied in the regions of pulsating aurora and polararcs, demonstrating the fact that ionospheric conductance requires some time to form and decay. These time delays constitute an effective “inertia” in the conductance calculation which is- not accounted for in many global models which assume an instantaneous connection between precipitation and conductance. Ionospheric conductance inertia influences the temporal variation in ionospheric and magnetospheric electric fields, and as a result, impacts magnetosphere‐ionosphere (MI) dynamics on a global scale.

George V Khazanov↗
NASA NTRSDate not supplied

Inertia of Ionospheric Conductance During Electron Precipitation Events in Pulsating Aurora and Polar Arcs

Using coupled SuperThermal Electron Transport (STET) and Super-thermal Proton Electron Atomic Hydrogen – tRansport in the Ionosphere and Thermosphere (SPEAH-RIT) codes, we demonstrate that temporal variability of ionospheric conductance is defined by several time scales: magnetospheric source time variations, starting time of electron precipitation, and termination of the corresponding source of magnetospheric origin. In this case, the time scales are defined by dissipation of energetic electrons and effective recombination processes. The results presented in this paper were applied in the regions of pulsating aurora and polar arcs, demonstrating the fact that ionospheric conductance requires some time to form and decay. These time delays constitute an effective “inertia” in the conductance calculation which is not accounted for in many global models which assume an instantaneous connection between precipitation and conductance. Ionospheric conductance inertia influences the temporal variation in ionospheric and magnetospheric electric fields, and as a result, impacts magnetospheric dynamics and ultimately reconfigures the electron precipitation.

Khazanov, George V↗
NASA NTRS1972

Thermal properties of granulated materials.

Review of the thermophysical properties of granular materials or silicates believed to simulate the lunar surface layer. Emphasis is placed on thermal conductivity data and the effects of material and environmental variables on the thermal conductivity. There are three basic mechanisms of heat transfer in particulate materials: conduction by the gas contained in the void spaces between the particles; conduction within the solid particles and across the interparticle contacts; and thermal radiation within the particles, across the void spaces between particle surfaces, and between void spaces themselves. Gas and solid conduction, thermal radiation, and the interaction between conduction and radiation are considered.

Wechsler, A. E.↗
NASA NTRS1986

Determining the influence and effects of manufacturing variables on sulfur dioxide cells

A survey of the Li/SO2 manufacturing community was conducted to determine where variability exists in processing. The upper and lower limits of these processing variables might, by themselves or by interacting with other variables, influence safety, performance, and reliability. A number of important variables were identified and a comprehensive design experiment is being proposed to make the proper determinations.

Zajac, W. V.↗
NASA NTRS1980

Aircraft noise effects: An inter-disciplinary study of the effect of aircraft noise on man. Part 3: Supplementary analyses of the social-scientific portion of the study on aircraft noise conducted by the DFG

Variables in a study of noise perception near the Munich-Reims airport are explained. The interactive effect of the stimulus (aircraft noise) and moderator (noise sensitivity) on the aircraft noise reaction (disturbance or annoyance) is considered. Methods employed to demonstrate that the moderator has a differencing effect on various stimulus levels are described. Results of the social-scientific portion of the aircraft noise project are compared with those of other survey studies on the problem of aircraft noise. Procedures for contrast group analysis and multiple classification analysis are examined with focus on some difficulties in their application.

Schumer, R.↗
NASA NTRS1999

Flight Testing of a Cryogenic Capillary Pumped Loop

Future space-based cryogenic systems will require enhanced integration flexibility, lower weight reduced parasitic penalties, better vibration isolation, and a variety of other improvements to meet performance goals. Additionally, there is an increasing need to locate cooling sources remotely from cooled components. In the past flexible conductive links were used and worked well in most cases. However, as the transport lengths increase, conductive couplings become heavier and less effective, and must be replaced by higher performance systems. One available option, which can meet many of these future requirements, is the cryogenic capillary pumped loop (CCPL). The development of the CCPL technology started in 1992, following the success of the room temperature CPLS. The extrapolation of CCPL technology to cryogenic temperatures offers many performance benefits, which are not currently within the reach of traditional heat pipes or conductive links. Specific advantages of the CCPL technology pertaining to cryocooler integration include: (1) greater capillary pumping pressure for improved ground testability; (2) improved mechanical isolation; (3) faster diode shutdown and lower reverse heat leaks; (4) tighter control of detector temperature; (5) variable or fixed conductance operation; and (6) ease of integration due to their flexibility. The applications of CCPL technology are numerous. Military and commercial applications include surveillance satellites, earth observing satellites, deep space observation systems, medical devices, and many other cryogenic systems. Over the past few years, several breadboard and prototype CCPLs have been built and ground tested. A prototype CCPL has demonstrated successful operation between 80K and 110K with heat loads between O.5W and 12W using nitrogen as the working fluid, and 35K and 40K with head loads of 0.25W to 3.5W using neon. In order to verify CCPL performance in a microgravity environment, a flight unit, CCPL-5, was tested onboard the Space Shuttle STS-95 in October of 1998 as part of the CRYOTSU Flight Experiment. This flight was the first in-space demonstration of the CCPL. The CCPL-5 utilized nitrogen as the working fluid and operated between 75K and 110K. Flight results indicated excellent performance of the CCPL-5 under zero-G environment The CCPL could start from a supercritical condition in all tests, and the loop operating temperature could be tightly controlled regardless of changes in the heat load and/or the sink temperature. In addition, the loop demonstrated successful operation with a heat load of 0.5W as well as with parasitic heat loads alone. There were no noticeable differences between zero-G and one-G operation.

Ku, Jentung↗
NASA NTRS1977

Results of phase change paint thermal mapping test OH46 using the 0.006-scale model 90-0 in the NASA LaRC variable density tunnel

Results of a test conducted in the NASA LaRC Mach 8 variable density tunnel to obtain thermal contours on a 0.006 scale model of the configuration 140B Space Shuttle Orbiter are presented using the phase change paint technique. The model was tested at 25 deg, 30 deg, and 35 deg angle of attack at unit Reynolds numbers ranging from 1.0 through 8.0 million per foot. The model was tested with and without a ventral fin mounted on its bottom centerline. Elevon deflections of 0 deg and 10 deg and bodyflap deflections of 0 and 13.75 deg were investigated.

Cummings, J. W.↗
NASA NTRS1977

Analytical study of laser supported combustion waves in hydrogen

A one-dimensional energy equation, with constant pressure and area, was used to model the LSC wave. This equation balances convection, conduction, laser energy absorption, radiation energy loss and radiation energy transport. Solutions of this energy equation were obtained to give profiles of temperature and other properties, as well as the relation between laser intensity and mass flux through the wave. The flow through the LSC wave was then conducted through a variable pressure, variable area streamtube to accelerate it to high speed, with the propulsion application in mind. A numerical method for coupling the LSC wave model to the streamtube flow was developed, and a sample calculation was performed. The result shows that 42% of the laser power has been radiated away by the time the gas reaches the throat. It was concluded that in the radially confined flows of interest for propulsion applications, transverse velocities would be less important than in the unconfined flows where air experiments have been conducted.

Kemp, N. H.↗
NASA NTRS1990

Electrical properties of the middle atmosphere

Probe techniques have been utilized extensively to measure middle atmospheric electrical properties such as the polar components of conductivity, ion mobility and density. The most variable of these parameters is conductivity, which is dependent on both charge mobility and concentration. Overall conductivity variations, attributable to different geophysical conditions, can exceed several orders of magnitude at some altitudes. Also, measurements of conductivity over the 20 to 90 km region indicate a general exponential increase with altitude, exceeding seven orders of magnitude during certain conditions. Gerdien condensers, on occasion, have measured very low-mobility positive ions in addition to the more commonly observed molecular species. These smaller mobility values appear to indicate the presence of very large ions at some altitudes, possibly charged particulates, having mass sizes greater than those identifiable by presently flown mass spectrometers. The presence of these large ions is of importance to middle atmospheric electrodynamics as a potential causal mechanism for measured large electric fields.

Mitchell, John D.↗
NASA NTRS1972

Apollo oxygen tank stratification analysis, volume 2

An analysis of flight performance of the Apollo 15 cryogenic oxygen tanks was conducted with the variable grid stratification math model developed earlier in the program. Flight conditions investigated were the CMP-EVA and one passive thermal control period which exhibited heater temperature characteristics not previously observed. Heater temperatures for these periods were simulated with the math model using flight acceleration data. Simulation results (heater temperature and tank pressure) compared favorably with the Apollo 15 flight data, and it was concluded that tank performance was nominal. Math model modifications were also made to improve the simulation accuracy. The modifications included the addition of the effects of the tank wall thermal mass and an improved system flow distribution model. The modifications improved the accuracy of simulated pressure response based on comparisons with flight data.

Barton, J. E.↗