Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “tailoring”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 181 records · Page 10
All sourcesNASA NTRSDOE OSTI
NASA NTRS2015

Aeroelastic Tailoring Study of N+2 Low-Boom Supersonic Commercial Transport Aircraft

The Lockheed Martins N+2 Low-boom Supersonic Commercial Transport (LSCT) aircraft is optimized in this study through the use of a multidisciplinary design optimization tool developed at the NASA Armstrong Flight Research Center. A total of 111 design variables are used in the first optimization run. Total structural weight is the objective function in this optimization run. Design requirements for strength, buckling, and flutter are selected as constraint functions during the first optimization run. The MSC Nastran code is used to obtain the modal, strength, and buckling characteristics. Flutter and trim analyses are based on ZAERO code and landing and ground control loads are computed using an in-house code.

aeroelastic tailoring↗
NASA NTRS2015

Aeroelastic Tailoring Study of N+2 Low Boom Supersonic Commerical Transport Aircraft

The Lockheed Martin N+2 Low - boom Supersonic Commercial Transport (LSCT) aircraft was optimized in this study through the use of a multidisciplinary design optimization tool developed at the National Aeronautics and S pace Administration Armstrong Flight Research Center. A total of 111 design variables we re used in the first optimization run. Total structural weight was the objective function in this optimization run. Design requirements for strength, buckling, and flutter we re selected as constraint functions during the first optimization run. The MSC Nastran code was used to obtain the modal, strength, and buckling characteristics. Flutter and trim analyses we re based on ZAERO code, and landing and ground control loads were computed using an in - house code. The w eight penalty to satisfy all the design requirement s during the first optimization run was 31,367 lb, a 9.4% increase from the baseline configuration. The second optimization run was prepared and based on the big-bang big-crunch algorithm. Six composite ply angles for the second and fourth composite layers were selected as discrete design variables for the second optimization run. Composite ply angle changes can't improve the weight configuration of the N+2 LSCT aircraft. However, this second optimization run can create more tolerance for the active and near active strength constraint values for future weight optimization runs.

low boom supersonic civil transport↗
NASA NTRS1979

Characterization of graphite/epoxy laminates for aeroelastic tailoring

A study of interaction between wing bending and twist by graphite/epoxy anisotropic laminates used in aircraft wing skins is presented. The laminates were used as covers for subscale box beams supported as a cantilever and tested in tip shear and tip torque, measuring beam response with a reflected light technique. The results indicated that the in-plane stiffness properties of anisotropic laminates can be predicted if the layer properties of the composite materials are known; thus, the coupled bending/twist response of wing type structures made from these laminates can be determined provided the limits of the laminate linear behavior are not significantly exceeded.

Shyprykevich, P.↗
NASA NTRS1981

Tailored plasma sprayed MCrAlY coatings for aircraft gas turbine applications

Eighteen plasma sprayed coating systems, nine based on the NiCoCrAly chemistry and nine based on the CoCrAly composition, were evaluated to identify coating systems which provide equivalent or superior life to that shown by the electron beam physical vapor deposited NiCoCrAly and CoCrAly coatings respectively. NiCoCrAly type coatings were examined on a single crystal alloy and the CoCrAly based coatings were optimized on the B1900+ Hf alloy. Cyclic burner rig oxidation and hot corrosion and tensile ductility tests used to evaluate the various coating candidates. For the single crystal alloy, a low pressure chamber plasma sprayed NiCoCrAly + Si coating exhibited a 2x oxidation life improvement at 1394 K (2050 F) over the vapor deposited NiCoCrAly material while showing equivalent tensile ductility. A silicon modified low pressure chamber plasma sprayed CoCrAly coating was found to be more durable than the baseline vapor deposited CoCrAly coating on the B1900+ Hf alloy.

Pennisi, F. J.↗
NASA NTRS1983

Structural tailoring of engine blades (STAEBL)

Mathematical optimization is applied to the design of gas turbine fan blades. The automated procedure replaces the current manual process which requires experience and intuition on the part of the designer to achieve successful blade designs. The optimization procedure that is developed utilizes the COPES/CONMIN optimization code. Approximate vibration and stress analyses are used for the optimization process. Analysis recalibrations are achieved through the application of more detailed, refined analysis. Optimizations of a hollow titanium fan blade with composite inlays and of a superhybrid composite blade are demonstrated.

Brown, K. W.↗
NASA NTRS1983

Aeroelastic tailoring of rotor blades for vibration reduction in forward flight

Modern structural optimization techniques are applied to vibration reduction of helicopter rotor blades in forward flight. The objective function minimized consists of the oscillatory vertical hub shears or the hub rolling moments at one particular advance ratio. The behavior constraints are the frequency placements of the blade and the requirement that aeroelastic stability margins, in hover, remain unaffected by the optimization process. The aeroelastic stability and response analysis is based on a fully coupled flap-lag-torsional analysis of the blade. The vertical hub shears and rolling moments used as the objective function are obtained by appropriate integration of the loads acting along the span of the blade combined with a transformation to a hub fixed coordinate system, and a summation over the total number of blades. Numerical results for both a stiff-in-plane and a soft-in-plane configuration are presented, indicating that structural optimization yields the highest benefits when applied to soft-in-plane blade configuration. The results indicate substantial (15-40 percent) reduction in vibration levels, as well as a blade which is 20 percent lighter than the initial design.

Friedmann, P. P.↗
NASA NTRS1983

Double layered tailorable advanced blanket insulation

An advanced flexible reusable surface insulation material for future space shuttle flights was investigated. A conventional fly shuttle loom with special modifications to weave an integral double layer triangular core fabric from quartz yarn was used. Two types of insulating material were inserted into the cells of the fabric, and a procedure to accomplish this was developed. The program is follow up of a program in which single layer rectangular cell core fabrics are woven and a single type of insulating material was inserted into the cells.

Falstrup, D.↗
NASA NTRS1986

Tailorable Infrared Sensing Devices

Alternating layers of GexSi1.x and Si deposited by molecular beam epitaxy. When electric field applied across stack, acts as detector for infrared photons. Device fabricated on silicon substrate together with sophisticated very-large-scale integrated circuitry. Useful for wide range of applications related to robotics, space exploration, and terrestrial surveillance.

Cheng, L. J.↗
NASA NTRS1984

Tailoring a software production environment for a large project

A software production environment was constructed to meet the specific goals of a particular large programming project. These goals, the specific solutions as implemented, and the experiences on a project of over 100,000 lines of source code are discussed. The base development environment for this project was an ordinary PWB Unix (tm) system. Several important aspects of the development process required support not available in the existing tool set.

Levine, D. R.↗