Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “mixed conduction”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 181 records · Page 10
All sourcesNASA NTRSDOE OSTI
DOE OSTI2023

Structural mapping and tuning of mixed halide ions in amorphous sulfides for fast Li-ion conduction and high deformability

Amorphous sulfides are among the most promising candidates for solid electrolytes (SEs) owing to their excellent deformability and acceptable Li-ion conductivity (σion) at room temperature. However, the complex atomic structure of these amorphous materials without long-range ordering results in a lack of structural understanding and difficulties in tuning material properties. Here, in this study, we performed structural mapping of glassy sulfide SEs composed of various anion clusters using a combinatorial atomic level analysis of synchrotron X-ray-based pair distribution function (PDF) and reverse Monte-Carlo (RMC) methods, demonstrating the potential to tune σ ion in glass SEs. First, we prepared a new glassy sulfide with a mixed anion framework of two halogens (Br and I) as atomic anions, with PS 4 3- molecular anions in a Li 2 S–P 2 S 5 -based glass SE. At a specific Br content, [(Li 2 S) 0.658 (LiI 0.9 LiBr 0.1 ) 0.342 ] 0.825 [P 2 S 5 ] 0.175 recorded a σ ion of 2.27 mS cm -1 , the highest value for any glass sulfides reported to date; however, its elastic modulus was still suppressed to 14.48 GPa. PDF and RMC calculations successfully provided structural mapping of anion clusters, including two halogens. Molecular dynamics simulations of each composition confirmed that flexible coordination caused by the rattling of small polarizable Br ions in the mixed halogens of glassy SEs contributed to the superior σ ion . Our results may provide new insights into the design of superior glassy SEs that play key roles in all-solid-state batteries requiring fast Li-ion conduction and high deformability.

36 MATERIALS SCIENCE↗
DOE OSTI2025

Tailoring optical response of MXene thin films

Due to their attractive optical properties, 2D MXenes have garnered interest in nanophotonic and optoelectronic applications. However, tuning their properties typically requires the iterative synthesis of MXenes with a specific set of properties, such as the absorption band position, electronic conductivity, and dielectric constant. We demonstrate how to tailor the optical properties of MXene thin films over a broad 1500-nm wavelength range by mixing different ratios of highly conductive Ti 3 C 2 T x with poorly conductive Nb 2 CT x . By changing the MXene film composition, the epsilon-near-zero (ENZ) point, where the optical properties transit from dielectric to metallic, was varied in the spectral range from 1.1 to 2.6 µm. Additionally, we observed a reduction in absorption in some compositions compared to the absorption of the pure MXene films. Compared to other methods, this approach enables simple and continual tuning of MXene optical properties without requiring multiple time-consuming synthesis steps.

2D materials↗
DOE OSTI2022

Halide sublattice dynamics drive Li-ion transport in antiperovskites

Here, in this work, we resolve how proton dynamics and halide mixing enhance or impede ionic conduction in protonated lithium antiperovskites (pLiAP) at compositions near the eutectic points of the halide salts. As a material class, pLiAPs of the form Li 3-x OH x X, (X = Cl, Br) show vast compositional design freedom; however, the resulting properties are susceptible to synthesis and processing methodologies. Proton incorporation and halide mixing stabilize the perovskite cubic phase at low temperatures (<50 °C) and using halide mixtures near the eutectic points (~250 to 300 °C) offer possibilities of lower temperature and faster synthesis and processing conditions (<1 h). Mixed-halide compositions such as Li 2 OHCl 0.37 Br 0.63 lead to a 30-fold improvement in room temperature ionic conductivity of a single halide structure, 1.5 × 10 -6 vs. 4.9 × 10 -8 S cm -1 (Li 2 OHCl). We combine infrared spectroscopy and nuclear magnetic resonance with first-principles density functional theory calculations to deconvolute halide mixing effects from local proton dynamics on Li-ion transport. In contrast to what has been supposed, our findings suggest that the halide sublattice dynamics, besides the OH rotation, correlate strongly with the fast-ion conduction at high temperatures.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2022

Giant Isotope Effect of Thermal Conductivity in Silicon Nanowires

Isotopically purified semiconductors potentially dissipate heat better than their natural, isotopically mixed counterparts as they have higher thermal conductivity (κ). But the benefit is low for Si at room temperature, amounting to only ~10% higher κ for bulk 28 Si than for bulk natural Si ( nat Si). Here we show that in stark contrast to this bulk behavior, 28 Si (99.92% enriched) nanowires have up to 150% higher κ than nat Si nanowires with similar diameters and surface morphology. Using a first-principles phonon dispersion model, this giant isotope effect is attributed to a mutual enhancement of isotope scattering and surface scattering of phonons in nat Si nanowires, correlated via transmission of phonons to the native amorphous SiO 2 shell. The Letter discovers the strongest isotope effect of κ at room temperature among all materials reported to date and inspires potential applications of isotopically enriched semiconductors in microelectronics.

36 MATERIALS SCIENCE↗
DOE OSTI2021

Multicomponent pyrochlore solid solutions with uranium incorporation – A new perspective of materials design for nuclear applications

Multicomponent pyrochlore solid solutions with and without uranium incorporation were fabricated and their thermal-mechanical properties were characterized. Multicomponent pyrochlore solid solutions without uranium exhibit comparable thermal conductivity and higher mechanical strength compared to baseline single component rare-earth titanate pyrochlore (A 2 Ti 2 O 7 ). Uranium incorporation reduces hardness as compared with single component compositions. High entropy pyrochlore with uranium displays the highest thermal conductivity within multicomponent pyrochlore solid solutions with significantly better mechanical properties than UO 2 . The measured thermal conductivity correlates well with A-site cation mixing entropy and a modified size disorder parameter, and thus the size disorder and mixing entropy could be good indicators for predicting thermal conductivity of multicomponent pyrochlore solid solutions. This work opens up the possibility of designing multicomponent oxide solid solutions by controlling their chemical disorder/mixing entropy to achieve acceptable thermal-mechanical properties, desired radiation and corrosion performance for potential nuclear waste form and inert matrix fuel applications.

12 MANAGEMENT OF RADIOACTIVE AND NON-RADIOACTIVE W↗
DOE OSTI2021

Crosslinked polymer binders for electrochemical energy storage devices

An electrochemical storage device including a conductive material and an electrochemical storage device material held together by a covalently crosslinked binder matrix. A method of forming an electrode for an electrochemical storage device, the method including the steps of: mixing electrochemical storage device material, conductive material, linear polymer, and crosslinker with one or more solvents, the resultant mixture forming an electrode slurry, crosslinking the linear polymer with the crosslinker to thereby create a covalently crosslinked polymer network of the polymer and crosslinker, the crosslinked polymer network physically or chemically binding together the electrochemical storage device material and the conductive material.

Zhu, Yu↗
DOE OSTI2021

Investigating the Evolution of Ice Particle Distributions in Mixed-Phase Clouds

The goal of this project is to conduct modeling studies that focus on the processes that control the macrophysical and microphysical properties of mixed phase clouds, such as the partitioning of water phase and the processes that promote precipitation and govern cloud evolution. The process specific to this project is the collection of vapor-grown non-spherical ice crystals and snow hydrometeors through aggregation, as uncertainty remains in the evolution of particle properties as they aggregate. To aid in the understanding of ice particle evolution from pristine monomers to aggregates, the aggregation process is depicted using an offline simulator for ice crystal collection, namely the Ice Particle and Aggregate Simulator (IPAS). Of particular interest in the context of this work is the influence of monomer habit on aggregation and subsequently on cloud microphysical structure. This overarching goal has been completed by conducting modeling studies using the Adaptive Habit Model (AHM) in mixed-phase cloud systems, which predicts and evolves ice shape. While the AHM is designed with physical detail in mind, those details may be lost on larger spatial or temporal scales. Hence, how the contributions of particle growth and collection control the evolution of ice particle size distributions (PSDs) and redistribute mass within the cloud and at the surface has been investigated. Analyses include microphysical sensitivity investigations that inform on future improvement capabilities of microphysical parameterizations in larger scale models. Further, improvements of processes within ice clouds have resulted from this work as the environmental processes controlling ice crystal growth, microphysical processes, and precipitation are inherently integrated within this investigation.

54 ENVIRONMENTAL SCIENCES↗
DOE OSTI2024

Anisotropic hybridization in CeRhSn

The optical conductivity σ⁡(ω, T) of CeRhSn was studied by broadband infrared spectroscopy. Temperature-dependent spectral weight transfer occurs over high energy (0.8 eV) and temperature (~500 K) scales, classifying CeRhSn as a mixed-valent compound. The optical conductivity reveals a substantial anisotropy in the electronic structure. Renormalization of σ⁡(ω, T) occurs as a function of temperature to a coherent Kondo state with concomitant effective mass generation. Associated spectroscopic signatures were reproduced remarkably well by the combination of density functional theory and dynamical mean-field theory using a momentum-independent self-energy. The theory shows that the anisotropy for energies > 10 meV is mainly driven by the bare three-dimensional electronic structure that is renormalized by local electronic correlations. The possible influence of magnetic frustration and quantum criticality is restricted to lower energies.

36 MATERIALS SCIENCE↗
DOE OSTI2023

Low thermal conductivity in Bi 8 CsO 8 SeX 7 (X = Cl, Br) by combining different structural motifs

Understanding the structure–property relationships of materials in order to supress thermal conductivity is crucial for developing efficient thermoelectric generators and thermal barrier coatings. Low thermal conductivity materials can often contain a single dominant phonon scattering mechanism. Here, we highlight how combining different structural features into one material can aid in the design and identification of new materials with low thermal conductivities. We synthesise two new mixed-anion materials, Bi 8 CsO 8 SeX 7 (X = Cl and Br), with low thermal conductivities of 0.27(2) and 0.22(2) W m -1 K -1 respectively, measured along their c-axes at room temperature. The Bi 8 CsO 8 SeX 7 materials possess a combination of bond strength hierarchies, Cs + vacancies, and low frequency Cs + rattling. These different features significantly inhibit phonon transport along different crystallographic directions. Due to sharp bond strength contrast between the van der Waals gaps and [Bi 2 O 2 ] 2+ layers, the Bi 8 CsO 8 SeX 7 materials exhibit thermal conductivities <50% of the theoretical minimum when measured along the stacking direction. Conversely, the thermal conductivity associated with the ab-plane is reduced by Cs + rattling when compared to the structurally and compositionally related BiOCl.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2022

Faradaic efficiency in protonic-ceramic electrolysis cells

Abstract Proton-conducting ceramics (e.g. doped barium zirconates or cerates) are typically mixed ionic-electronic conductors (MIECs). The electronic conduction, typically in the form of positively charged small polarons or electron holes, leads to ‘electronic leakage.’ In an ideal steam-electrolysis cell, one gas-phase H 2 molecule is produced from every two electrons delivered from an external power source. In other words, such ideal behavior achieves 100% faradaic efficiency. However, the electronic flux associated with MIEC membranes contributes to reduced faradaic efficiency. The present paper develops a model that predicts the behavior of faradaic efficiency as a function of electrolysis-cell operating conditions. Although the model framework is more general, the paper focuses on the behavior of a cell based upon a BaCe 0.7 Zr 0.1 Y 0.1 Yb 0.1 O 3 − δ (BCZYYb) membrane. The study predicts the effects of operating conditions, including temperature, pressure, and gas compositions.

Zhu, Huayang↗
DOE OSTI2021

Total metals & anion concentration data; Slate River floodplain, Crested Butte, CO; May 2020-September 2020

This data package includes processed and undiluted measurements for metal and anion concentrations from pore water (groundwater) samples from the Slate River floodplain of Crested Butte, CO, a focus field site for the SLAC Floodplain Hydro-Biogeochemistry SFA. The data was generated as part of the work targeting the overarching research question for the SLAC SFA: How do ubiquitous subsurface interfaces mediate molecular-scale biogeochemical processes and groundwater quality in floodplains and watersheds? Samples were collected between May and September of 2020. These measurements were all recorded at the Arizona Laboratory for Emerging Contaminants (ALEC) at the University of Arizona located in Tucson, AZ. Groundwater samples were extracted from a network of installed rhizon (Rhizosphere Research Products, part no. 19.60.21F, 0.6 micrometer mesh size) and piezometer wells within the river floodplain. All water samples were shaded from sun exposure during extraction from the subsurface and preserved at 4C until measured at ALEC.Analysis by ICP-MS:Measurements for total metals were made on the Agilent 7700x ICP-MS (for total metals) – Agilent Technologies, Santa Clara, CA.The analytical QA/QC protocol was adapted from US EPA Method 200.8 for analysis by ICP-MS. Calibration standards were prepared from multi-element stock solution (Sigma-Aldrich Multielement standard solution for ICP, St. Louis, MO) using matrix matched to sample solutions (either 2% HCl or HNO3 from AriStar Plus,grade acids from VWR Scientific). Calibration curves include at least 7 points with correlation coefficients > 0.995. The QC protocol includes a continuing calibration blank (CCB), a continuing calibration verification (CCV) solution and at least one quality control sample (QCS) to be analyzed just after calibration and again after every 12 samples and at the completion of the run. The QCS solutions are from an independent source, such as NIST SRM 1643e - Trace Elements in Water, or QCS solutions from High Purity Standards (Charleston, SC). Acceptable QC responses must be between 90 and 110% of the certified value. An internal standard (Rh) is added via on-line addition into the sample line using a mixing tee.Analysis by Ion Chromatography (Anions):The protocol follows Method 4110 in Standard Methods for Examination of Water and Wastewater.The instrument used is the Thermo Scientific Dionex ICS-6000 using AS+AG22 column set for anion analysis with isocratic method using sodium carbonate eluent. Detection is by chemical suppression of eluent conductivity. Quality control solutions and mixed analyte standards purchased from Inorganic Ventures, Christiansburg, VA.All files are in csv format.

54 ENVIRONMENTAL SCIENCES↗
DOE OSTI2025

Physics-Informed Neural Network (PINN) Prediction of Mixed Mass-Heat-Crystallization Limited Methane Hydrate Formation and Dissociation in Micro-Confinement

The creation and use of Physics-Informed Neural Networks (PINNs) for simulating the dynamics of methane hydrate formation and dissociation will be presented. The PINN framework's main benefit is its capacity to impose physical consistency with only a partial comprehension of the governing equations. This makes the algorithm especially useful for systems with little experimental evidence or a lack of theoretical knowledge. A strong basis for forecasting methane hydrate behavior over the verified operating ranges of 30.0-80.9 bar pressure and 1.0-4.0 K sub-cooling conditions is provided by the combination of conductive heat transfer equations and mixed mass-transfer–crystallization kinetics. PINNs were more accurate at predicting the mixed mass-heat-crystallization limited kinetics than conventional Artificial Neural Networks (ANNs), demonstrating remarkable predictive accuracy for methane hydrate production over the ANN model. The efficiency of incorporating physical limitations from first principles into machine learning frameworks for methane hydrate crystallizations is reinforced by these findings. For hydrate-related applications in energy generation, carbon sequestration, and climate modelling, our study establishes PINNs as a computational tool that is both scalable and efficient. The proven capacity to close the gap between conventional physics-based simulations and solely data-driven models creates new opportunities for expedited hydrate research and practical applications.

Hartman, Ryan L [NYU Tandon School of Engineering]↗
DOE OSTI2022

Structural design strategies for superionic sodium halide solid electrolytes

We report sodium all-solid-state batteries (ASSBs) with superionic solid electrolytes (SEs) show substantial potential for large-scale energy-storage applications. Recently, lithium halide SEs have attracted attention owing to their potential compatibility with high-voltage cathode materials and high ionic conductivity. Although sodium halide SEs are believed to exhibit good electrochemical stability, very few compounds have been reported. This study provides design principles for superionic sodium halide SEs through systematic theoretical investigations of Na 3 MX 6 (X = Cl, Br, and I). The Na 3 MX 6 structures depend on the types and sizes of M and X: Na 3 MCl 6 and Na 3 MBr 6 prefer the $P\bar{3}$1c, P2 1 /n and $R\bar{3}$ phases, whereas Na 3 MI 6 prefers the C2/m phase. The Na 3 MI 6 C2/m phase is found to exhibit reasonably high ionic conductivity (~10 -4 S/cm -1 ) and anion mixing with Br further improve Na-ion migration, leading to an even higher ionic conductivity (~10 -3 S/cm -1 ) for Na 3 MBr 3 I 3 . The material design principles in this study provide fundamental guidelines for the development of superionic Na halide SEs for high-voltage Na ASSBs

25 ENERGY STORAGE↗
DOE OSTI2026

Ammonolysis with N 2 -diluted NH 3 suppresses Ta( IV ) defects in BaTaO 2 N and enhances photocatalytic water oxidation

BaTaO 2 N stands out among oxynitride photocatalysts because of its ability to capture visible light and to drive the photoelectrochemical water oxidation reaction. However, its solar energy conversion performance is limited by electron–hole recombination at Ta( IV ) defects in the material. These defects are formed by overreduction of the Ta(v) oxide precursor by excess ammonia under the high temperature conditions during ammonolysis. Here we show for the first time that Ta( IV ) defect concentrations can be lowered by conducting the ammonolysis reaction in mixed NH 3 /N 2 gas. The obtained BaTaO 2 N samples crystallize in the cubic CaTiO 3 structure type and form 200–300 nm faceted nanocrystals, based on X-ray diffraction, scanning electron microscopy, and HRTEM. Electron paramagnetic resonance spectra observe the Ta( IV ) defects at g = 1.999 and confirm an 11-fold reduction for the product synthesized in mixed (0.13 : 1.0 vol) NH 3 /N 2 gas, equivalent to 1.14 × 10 16 cm −3 Ta( IV ) ions. This optimized BaTaO 2 N has nearly twice the photocatalytic oxygen evolution activity (AQE of 6.78% at 400 nm) of a reference material made with 1.0 atm ammonia and 78% higher photoelectrochemical water oxidation photocurrent (0.9 mA cm −2 at 1.23 V vs. RHE) under simulated sunlight. According to X-ray photoelectron spectroscopy, remaining Ta( IV ) defects are concentrated in the surface region of the BaTaO 2 N particles, where >50% of all Ta ions are found in the +4 oxidation state. This surface Ta( IV ) population can be directly observed in Vibrating Kelvin Probe Surface Photovoltage Spectra (VK-SPV) via its 1.2–1.4 eV photovoltage onset. Here, it suggests that the surface Ta( IV ) ions contribute empty d-states 0.5–0.7 eV below the BaTaO 2 N conduction band edge. These findings highlight how the energetics and concentrations of Ta( IV ) defects influence the photoelectrochemical water oxidation ability of BaTaO 2 N. Additionally, the work establishes ammonolysis with diluted NH 3 as a new tool to minimize defects in BaTaO 2 N and to raise its solar energy conversion efficiency toward its theoretical limit. Because of its simplicity, the reduced ammonia pressure strategy will likely be applicable to other oxynitrides, which generally suffer from overreduction problems during ammonolysis.

Salmanion, Mahya [University of California, Davis,↗
DOE OSTI2021

Characterization of an electrically conductive proppant for fracture diagnostics

Fracture diagnosis with electromagnetic (EM) and electrical tools requires proppants with high electrical conductivity and mechanical strength. Lab measurements of the electrical and hydraulic conductivity of proppants are critical for selecting the best candidates. Such measurements greatly benefit simulations, field tests, and the ultimate application of such proppants in the field. To that end, a new lab protocol is developed for measuring the electrical and hydraulic conductivity of proppants. The lab setup, which mainly includes a resistivity core holder and a Hassler sleeve core holder, allows for simulation of realistic pressure and temperature conditions when making measurements. Petroleum coke (PC) is proposed as a candidate proppant because of its widespread availability and low cost. Lab measurements show that the effective electrical conductivity of pure PC in a model fracture is approximately 5000 S/m, under a closure stress greater than [Formula: see text] (4000 psi). When PC is mixed with sand, the effective electrical conductivity of the mixture decreases with an increasing weight percentage of sand. Although sand degrades the contact between PC particles, the electrical conductivity stays reasonably high (approximately 1700 S/m) when 50% sand is added. Hydraulic conductivity measurements show that when a fracture is propped with pure PC, the measured fracture conductivity is greater than [Formula: see text] ([Formula: see text]) (dimensionless fracture conductivity greater than 100 for a shale with [Formula: see text] or 100 nD permeability) under a confining pressure of [Formula: see text] (6000 psi). This means that a fracture propped with PC is infinitely conductive in a typical shale formation. When sand is added, the fracture’s hydraulic conductivity becomes even higher, which clearly shows PC’s ability of sustaining high stresses. The proposed protocol provides a robust and effective method that can be generalized for lab testing for other candidate proppants. The data presented clearly show that PC has the potential for field-scale applications in EM hydraulic fracture diagnostics.

Geochemistry & Geophysics↗
DOE OSTI2023

A highly proton conductive perfluorinated covalent triazine framework via low-temperature synthesis

Proton-conducting materials are essential to the emerging hydrogen economy. Covalent triazine frameworks (CTFs) are promising proton-conducting materials at high temperatures but need more effective sites to strengthen interaction for proton carriers. However, their construction and design in a concise condition are still challenges. Herein, we show a low temperature approach to synthesize CTFs via a direct cyclotrimerization of aromatic aldehyde using ammonium iodide as facile nitrogen source. Among the CTFs, the perfluorinated CTF (CTF-TF) was successfully synthesized with much lower temperature ( ≤ 160 °C) and open-air atmosphere. Due to the additional hydrogen-bonding interaction between fluorine atoms and proton carriers (H 3 PO 4 ), the CTF-TF achieves a proton conductivity of 1.82 × 10 -1 S cm -1 at 150 °C after H 3 PO 4 loading. Moreover, the CTF-TF can be readily integrated into mixed matrix membranes, displaying high proton conduction abilities and good mechanical strength. This work provides an alternative strategy for rational design of proton conducting media.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2023

High‐Throughput Screening Assisted Discovery of a Stable Layered Anti‐Ferromagnetic Semiconductor: CdFeP 2 Se 6

Recent advances in 2D magnetism have heightened interest in layered magnetic materials due to their potential for spintronics. In particular, layered semiconducting antiferromagnets exhibit intriguing low-dimensional semiconducting behavior with both charge and spin as carrier controls. However, synthesis of these compounds is challenging and remains rare. Here, first-principles based high-throughput search is conducted to screen potentially stable mixed metal phosphorous trichalcogenides (MM ' P 2 X 6 , where M and M ' are transition metals and X is a chalcogenide) that have a wide range of tunable bandgaps and interesting magnetic properties. Among the potential candidates, a stable semiconducting layered magnetic material, CdFeP 2 Se 6 , that exhibits a short-range antiferromagnetic order at T N = 21 K with an indirect bandgap of 2.23 eV is successfully synthesized . This work suggests that high-throughput screening assisted synthesis can be an effective method for layered magnetic materials discovery.

2D materials↗