Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “electronic conductivity”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 181 records · Page 10
All sourcesNASA NTRSDOE OSTI
DOE OSTI2020

Interfacial control of oxygen vacancy doping and electrical conduction in thin film oxide heterostructures

Systems and methods of reversibly controlling the oxygen vacancy concentration and distribution in oxide heterostructures consisting of electronically conducting In2O3 films grown on ionically conducting Y2O3-stabilized ZrO2 substrates. Oxygen ion redistribution across the heterointerface is induced using an applied electric field oriented in the plane of the interface, resulting in controlled oxygen vacancy (and hence electron) doping of the film and possible orders-of-magnitude enhancement of the film's electrical conduction. The reversible modified behavior is dependent on interface properties and is attained without cation doping or changes in the gas environment in contact with the sample.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2020

A Novel Magnetic Material by Design: Observation of Yb 3+ with Spin-1/2 in Yb x Pt 5 P

The localized f-electrons enrich the magnetic properties in rare-earth-based intermetallics. Among those, compounds with heavier 4d and 5d transition metals are even more fascinating because anomalous electronic properties may be induced by the hybridization of 4f and itinerant conduction electrons primarily from the d orbitals. Here, we describe the observation of trivalent Yb 3+ with S = 1/2 at low temperatures in Yb x Pt 5 P, the first of a new family of materials. Yb x Pt 5 P (0.23 ≤ x ≤ 0.96) phases were synthesized and structurally characterized. They exhibit a large homogeneity width with the Yb ratio exclusively occupying the 1a site in the anti-CeCoIn 5 structure. Moreover, a sudden resistivity drop could be found in Yb x Pt 5 P below ~0.6 K, which requires further investigation. First-principles electronic structure calculations substantiate the antiferromagnetic ground state and indicate that two-dimensional nesting around the Fermi level may give rise to exotic physical properties, such as superconductivity. Yb x Pt 5 P appears to be a unique case among materials.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2025

Magnetic polaron formation in EuZn2P2

Colossal magnetoresistance (CMR) has been observed across many Eu2+-based materials; however, its origin is not completely understood. Here we investigate the antiferromagnetic insulator EuZn2⁢P2 through single crystal x-ray diffraction, transmission electron microscopy, electrical transport, magnetization, dilatometry, and electron spin resonance measurements complemented by density functional theory calculations. Our electrical resistivity data reveal a large negative magnetoresistance, MR=[𝑅⁡(𝐻)−𝑅⁡(0)]/𝑅⁡(0), that reaches MR=−99.7% at 9 T near the antiferromagnetic ordering temperature 𝑇𝑁=23K. Dilatometry measurements show an accompanying field-induced lattice strain. Additionally, Eu2+ electron spin resonance reveals a strong ferromagnetic exchange interaction between Eu2+ and conduction electrons. Our experimental results in EuZn2⁢P2 are consistent with a magnetic polaron scenario and suggest magnetic polaron formation as a prevailing explanation of CMR in Eu2+-based compounds.

Cook, Matt [ORNL] (ORCID:0000000288777505)↗
DOE OSTI2024

Probing the active sites of oxide encapsulated electrocatalysts with controllable oxygen evolution selectivity

Electrocatalysts encapsulated by nanoscopic overlayers can control the rate of redox reactions at the outer surface of the overlayer or at the buried interface between the overlayer and the active catalyst, leading to complex behavior in the presence of two competing electrochemical reactions. This study investigated oxide encapsulated electrocatalysts (OECs) comprised of iridium (Ir) thin films coated with an ultrathin (2–10 nm thick) silicon oxide (SiO x ) or titanium oxide (TiO x ) overlayer. The performance of SiO x |Ir and TiO x |Ir thin film electrodes towards the oxygen evolution reaction (OER) and Fe(II)/Fe(III) redox reactions were evaluated. An improvement in selectivity towards the OER was observed for all OECs. Overlayer properties, namely ionic and electronic conductivity, were assessed using a combination of electroanalytical methods and molecular dynamics simulations. SiO x and TiO x overlayers were found to be permeable to H 2 O and O 2 such that the OER can occur at the MO x |Ir (M = Ti, Si) buried interface, which was further supported with molecular dynamics simulations of model SiO 2 coatings. In contrast, Fe(II)/Fe(III) redox reactions occur to the same degree with TiO x overlayers having thicknesses less than 4 nm as bare electrocatalyst, while SiO x overlayers inhibit redox reactions at all thicknesses. This observation is attributed to differences in electronic transport between the buried interface and outer overlayer surface, as measured with through-plane conductivity measurements of wetted overlayer materials. These findings reveal the influence of oxide overlayer properties on the activity and selectivity of OECs and suggest opportunities to tune these properties for a wide range of electrochemical reactions.

08 HYDROGEN↗
DOE OSTI2024

Comparing ab initio and quantum-kinetic approaches to electron transport in warm dense matter

Accurate knowledge of the electronic transport properties of warm dense matter is one of the main concerns of research in high-energy-density physics. Three modern approaches with vastly different levels of fidelity are reviewed and compared: the Kubo–Greenwood (KG) approach based on density-functional-theory molecular dynamics simulations (QMD), quantum kinetic theory based on average-atom models, and time-dependent density functional theory. Throughout, emphasis is placed on the connection between static properties of the electrons (e.g., density of states) and transport properties. Overall, it is found that whenever the conduction electrons can be modeled as being nearly free, fair to excellent agreement is found between QMD and kinetic theory approaches. Such a circumstance is required for modeling warm dense matter as a plasma of ions and free electrons, which is assumed in most kinetic theory approaches. The sensitivity of transport properties to the electronic structure is further highlighted by comparing different exchange–correlation approximations in QMD and KG calculations. It is found that the inclusion of exact exchange via thermal hybrid functionals can make a pronounced impact on electrical and thermal conduction in warm dense matter. We also investigate dynamic screening physics via kinetic theory and time-dependent density functional theory calculations of the mean free path of an electron in a hot dense plasma. In sum, we identify three axes along which to make progress in predicting electron transport in warm dense matter.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗
DOE OSTI2025

Understanding and Tuning the Electronic Properties of Prussian Blue Analogues

Prussian blue analogues (PBAs) have attracted increasing interest owing to their potential applications in various fields such as energy storage and conversion, neuromorphic computing, and magnetic switching. With a general formula of A x M N [M C (CN) 6 ], they feature an open framework that provides abundant channels for diffusion of alkali metal ions A and allows flexible compositional control of transition metal ions M N and M C . The oxidation states of transition metal ions can be tuned by adjusting the amount (x) of alkali ions A. Here, we carried out density functional theory calculations combined with experimental measurements to investigate the effects of transition metal ions, alkali ions, and oxidation states on the electronic properties of PBAs. Our calculations found that the band gaps of PBAs can be tuned from close to 0 eV to more than 4 eV. Experimentally, we introduced the synthesis/characterization of five previously unreported PBAs (M N = Ru, Os; M C = Fe, Ru, and Os) to complete the nine stable M N :M C transition metal combinations in group VIII of the periodic table. The optically measured intervalence charge transfer excitation energies of group VIII PBAs are consistent with calculated band gaps. They demonstrate wide band gap tunability by adjusting transition metals and oxidation states, enabling semiconductor-to-metal transitions for memristor applications and enhancing electronic conductivity for battery applications. In conclusion, this work provides a computational/experimental database of electronic properties versus structural compositions for PBAs.

Electrical conductivity↗
DOE OSTI2024

A high-performance intermediate temperature reversible solid oxide cell with a new barrier layer free oxygen electrode

The best solution to address the critical durability issue of solid oxide electrolytic cells (SOECs) for high-efficiency and high-rate H 2 production is to lower the operating temperature without sacrificing the performance. Developing high performance oxygen electrodes (OEs) is a key to capitalizing this solution. Here, in this paper, we report on a highly active OE for intermediate temperature ZrO 2 -based SOECs without a CeO 2 barrier layer. The new barrier-layer-free (BLF) OE is a composite of two materials, (Bi 0.75 Y 0.25 ) 0.93 Ce 0.07 O 1.5±δ (BYC) that exhibits high oxide-ion conductivity and La 0.8 Sr 0.2 MnO 3 (LSM) that possesses a high electronic conductivity to enable fast oxygen reduction/evolution reactions (ORR/OER). Featuring a microscale porous BYC scaffold decorated with high surface area LSM nanoparticles (NPs), the new BLF-OE exhibited a low area specific resistance (ASR) of 0.10 Ω cm 2 at 650 °C in air. With 50%H 2 -50%H 2 O as a feed to hydrogen electrode (HE) and air to OE, the single cell performance achieved 588 mA cm -2 at 0.80 V in the fuel cell mode and 688 mA cm -2 at 1.30 V in the electrolytic mode at 650 °C. Our in-house testing showed that this level of performance was ~3.5x higher than the cell with the benchmark La 0.6 Sr 0.4 Co 0.2 Fe 0.8 O 3-δ -Ce 0.9 Gd 0.1 O 2-δ OE. The long-term durability testing under alternating fuel cell and electrolytic modes showed a low degradation rate of 0.10 mA cm -2 h -1 over 550 hours. These encouraging results showed the great promise of the newly developed BYC-LSM to be an excellent OE candidate for intermediate temperature SOECs.

25 ENERGY STORAGE↗
DOE OSTI2020

Improving SOFC Anode Electrocatalytic Activity Using Nanoparticle Infiltration into MIEC Compositions

Mitigating activation polarization in the anode is one of the major challenges in intermediate-temperature operation of solid oxide fuel cells (SOFCs). Liquid phase infiltration of nanoscale electrocatalysts has been shown to result in significant reductions in activation polarization in SOFC anodes. In this study, we explore liquid-phase infiltration of nickel, gadolinium doped ceria (GDC), and Ni/GDC electrocatalysts into two different types of cermet anodes: one with a conventional Ni-YSZ composition, and the other with a Ni-MIEC cermet anode where the YSZ has been doped with 3 mol% TiO 2 to impart electronic conductivity. The principal goal of this study is to explore the role of electronic transport in the MIEC phase in effective utilization of the infiltrated nanoscale electrocatalysts. The role of temperature, infiltration cycles and the type of electrocatalysts have been experimentally studied in symmetric cells using electrochemical impedance spectroscopy (EIS). Distribution of relaxation times (DRT) modeling has been used to elucidate the contributions of various charge transfer processes.

25 ENERGY STORAGE↗
DOE OSTI2023

Time-dependent density-functional-theory calculations of the nonlocal electron stopping range for inertial confinement fusion applications

Nonlocal electron transport is important for understanding laser-target coupling for laser-direct-drive (LDD) inertial confinement fusion (ICF) simulations. Current models for the nonlocal electron mean free path in radiation-hydrodynamic codes are based on plasma-physics models developed decades ago; improvements are needed to accurately predict the electron conduction in LDD simulations of ICF target implosions. Here we utilized time-dependent density functional theory (TD-DFT) to calculate the electron stopping power (SP) in the so-called conduction-zone plasmas of polystyrene in a wide range of densities and temperatures relevant to LDD. Compared with the modified Lee-More model, the TD-DFT calculations indicated a lower SP and a higher stopping range for nonlocal electrons. We fit these electron SP calculations to obtain a global analytical model for the electron stopping range as a function of plasma conditions and the nonlocal electron kinetic energy. This model was implemented in the one-dimensional radiation-hydrodynamic code LILAC to perform simulations of LDD ICF implosions, which are further compared with simulations by the standard modified Lee-More model. In conclusion, results from these integrated simulations are discussed in terms of the implications of this TD-DFT-based mean-free-path model to ICF simulations.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗
DOE OSTI2020

Thermal transport in compensated semimetals: Effect of electron-electron scattering on Lorenz ratio

It is well known that the electronic thermal conductivity of clean compensated semimetals can be greatly enhanced over the electric conductivity by the availability of an ambipolar mechanism of conduction, whereby electrons and holes flow in the same direction experiencing negligible Coulomb scattering as well as negligible impurity scattering. This enhancement—resulting in a breakdown of the Wiedemann-Franz law with an anomalously large Lorenz ratio—has been recently observed in two-dimensional monolayer and bilayer graphene near the charge neutrality point. In contrast to this, three-dimensional compensated semimetals such as WP 2 and Sb are typically found to show a reduced Lorenz ratio. Here, we investigate the reasons for this difference, focusing on the low-temperature regime where the electron-electron scattering is expected to dominate over other scattering mechanisms. We show that the different regimes of Fermi statistics (nondegenerate electron-hole liquid in graphene versus degenerate electron-hole liquid in compensated semimetals) are not sufficient to explain the reduction of the Lorenz ratio in the latter. We propose that the solution of the puzzle lies in the large separation of electron and hole pockets in momentum space, which allows compensated semimetals to sustain sizable regions of electron-hole accumulation near the contacts. These accumulations suppress the ambipolar conduction mechanism and effectively split the system into two independent electron and hole conductors. We present a quantitative theory of the crossover from ambipolar to unipolar conduction as a function of the size of the electron-hole accumulation regions, and show that it naturally leads to a sample-size-dependent thermal conductivity.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗
DOE OSTI2020

Iron-based binary ferromagnets for transverse thermoelectric conversion

Thermoelectric generation using the anomalous Nernst effect (ANE) has great potential for application in energy harvesting technology because the transverse geometry of the Nernst effect should enable efficient, large-area and flexible coverage of a heat source. For such applications to be viable, substantial improvements will be necessary not only for their performance but also for the associated material costs, safety and stability. In terms of the electronic structure, the anomalous Nernst effect (ANE) originates from the Berry curvature of the conduction electrons near the Fermi energy. To design a large Berry curvature, several approaches have been considered using nodal points and lines in momentum space. Here we perform a high-throughput computational search and find that 25 percent doping of aluminium and gallium in alpha iron, a naturally abundant and low-cost element, dramatically enhances the ANE by a factor of more than ten, reaching about 4 and 6 microvolts per kelvin at room temperature, respectively, close to the highest value reported so far. The comparison between experiment and theory indicates that the Fermi energy tuning to the nodal web—a flat band structure made of interconnected nodal lines—is the key for the strong enhancement in the transverse thermoelectric coefficient, reaching a value of about 5 amperes per kelvin per metre with a logarithmic temperature dependence. We have also succeeded in fabricating thin films that exhibit a large ANE at zero field, which could be suitable for designing low-cost, flexible microelectronic thermoelectric generators.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗
DOE OSTI2022

Charge Reservoirs in an Expanded Halide Perovskite Analog: Enhancing High–Pressure Conductivity through Redox–Active Molecules

As halide perovskites and their derivatives are being developed for numerous optoelectronic applications, controlling their electronic doping remains a fundamental challenge. Herein, we describe a novel strategy of using redox-active organic molecules as stoichiometric electron acceptors. The cavities in the new expanded perovskite analogs (dmpz)[Sn 2 X 6 ], (X=Br – (1Br) and I – (1I)) are occupied by dmpz 2+ (N,N'-dimethylpyrazinium), with the LUMOs lying ca. 1 eV above the valence band maximum (VBM). Compressing the metal-halide framework drives up the VBM in 1I relative to the dmpz LUMO. The electronic conductivity increases by a factor of 105 with pressure, reaching 50(17) S cm –1 at 60 GPa, exceeding the high-pressure conductivities of most halide perovskites. This conductivity enhancement is attributed to an increased hole density created by dmpz 2+ reduction. Lastly, this work elevates the role of organic cations in 3D metal-halides, from templating the structure to serving as charge reservoirs for tuning the carrier concentration.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2021

The transport–structural correspondence across the nematic phase transition probed by elasto X-ray diffraction

Electronic nematicity in iron pnictide materials is coupled to both the lattice and the conducting electrons, which allows both structural and transport observables to probe nematic fluctuations and the order parameter. Here we combine simultaneous transport and X-ray diffraction measurements with in-situ tunable strain (elasto X-ray diffraction) to measure the temperature dependence of the shear modulus and elastoresistivity above the nematic transition and the spontaneous orthorhombicity and resistivity anisotropy below the nematic transition, all within a single sample of Ba(Fe 0.96 Co 0.04 ) 2 As 2 . The ratio of transport to structural quantities is nearly temperature independent over a 74 K range and agrees between the ordered and disordered phases. These results show that elasto X-ray diffraction is a powerful technique to probe the nemato-elastic and nemato-transport couplings, which have important implications to the nearby superconductivity. Furthermore, it also enables the measurement in the large strain limit, where the breakdown of the mean-field description reveals the intertwined nature of nematicity.

36 MATERIALS SCIENCE↗
DOE OSTI2023

Orbital hybridisation effects in B2 phase Cr doped Co 2 MnAl

Here we investigate here the magnetic, transport, local structural and electronic properties of Co 2 Mn 1−x Cr x Al (x = 0, 0.05, 0.1 and 0.2). Our results show that all the compounds stabilise in B2 phase and are ferromagnets. The results reveal disorder at the structural and magnetic levels. X-ray absorption near edge structure (XANES) analysis reveal signature of antisite disorder between Mn and Al atoms with equal ratio. The electronic structure calculations suggest enhancement in the half metallicity, localisation of electrons at the Fermi level and an increment in density of states with doping. The combined results of electronic structure calculations and XANES studies suggest transfer of electrons to the Co site. The results of high temperature resistivity measurements suggest the conduction electrons are undergoing transition from delocalisation to weak localisation to activated behaviour with Cr doping. The extended x-ray absorption spectroscopic analysis shows that the local structure around Mn atom is different from the global structure as obtained from the x-ray diffraction results. The behaviour of the edge region is in line with the trend as obtained from the compositional analysis. We observe link between the hybridisation of 3d like states at the Mn, Cr sites with that at the Co site and the transport properties. This could help in understanding the unusual decrement in the lattice parameter with doping. These results reveal the role of local structure in understanding the physical properties of such systems.

36 MATERIALS SCIENCE↗
DOE OSTI2025

Low-energy electrodynamics and a hidden Fermi liquid in the heavy-fermion compound CeCoIn 5

We present time-domain THz spectroscopy of thin films of the heavy-fermion superconductor CeCoIn 5 . Below the ≈40 K Kondo coherence temperature, a narrow Drude-like peak forms, as a result of the 𝑓-orbital–conduction-electron hybridization and the formation of the heavy-fermion state. The complex optical conductivity is analyzed through a Drude model and extended Drude model analysis. Via the extended Drude model analysis, we measure the frequency-dependent scattering rate (1/𝜏) and effective mass (𝑚*/𝑚 𝑏 ). This scattering rate shows a linear dependence on temperature, which matches the dependence of the resistivity as expected. Nevertheless, the width of the low-frequency Drude peak itself that is set by the renormalized quasiparticle scattering rate (1/𝜏*=𝑚 𝑏 /𝑚*⁢𝜏) shows a 𝑇 2 dependence. This is the scattering rate that characterizes the relaxation time of the renormalized quasiparticles. In conclusion, this gives evidence for a Fermi liquid state, which in conventional transport experiments is hidden by the strong temperature dependent mass.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗
DOE OSTI2023

Chapter 14: Surface plasmon resonance enhanced artificial photosynthesis of chemical fuels for energy storage

Nanostructured noble metals such as Au, Ag, and Cu have interesting optical properties because of the oscillation motions of their surface electrons upon strong coupling with light under resonance conditions. This resonant oscillation motion of conduction electrons refers to surface plasmon resonance (SPR) and localized SPR (LSPR) when localized near the surface of a nanoparticle. The extinction spectrum of a solution of plasmonic nanoparticles has tunable wavelength responses from UV to NIR due to strong light scattering and absorption which are highly sensitive to the permittivity of the nanoparticles, their sizes and shapes, and chemical environment. Strong light scattering due to the LSPR of plasmonic nanoparticles creates a strong localized and far-field intensity capable of enhancing light absorption characteristics of a chromophore near a plasmonic surface. Engineering the chromophores’ radiative decay dynamics can be done by 1) increasing its radiative decay rate to increase its photoluminescence intensity and 2) increasing its nonradiative decay rates associated to direct charge transfer to the metal surface. Such interesting photophysical properties of a chromophore can be extended to other light-absorbing materials such as semiconductor thin films and nanostructures. This plasmonic effect on the photophysics of a light-absorbing material can be theoretically and experimentally validated. The phenomenon has also been applied to advanced optoelectronic devices such as organic light-emitting diodes (OLED)1 and organic photovoltaics (OPV).2-4 The local field created by the SPR can provide an intense EM field to enhance photoluminescence emission of an organic chromophore5-8 and Raman scattering of an organic molecule, and single-molecule Raman9-10 can be detected on specially designed LSPR substrate. (Figure 1 on SPR for energy) Recent studies suggest that LSPR can be incorporated in light-harvesting and conversion systems to increase energy conversion in a solar cell and photoelectrochemical cell and chemical transformations of CO2 to chemical fuels.11-12 Plasmonic active metals naturally exhibit catalytic activities for electrochemical fuel conversion that can be enhanced by engineering their structures to form unique catalytic structures such as symmetry-broken Au-Cu Janus nanocrystals.13 These studies are critical to addressing the global challenges of energy14-15 and CO2 emission from nonrenewable sources such as coal, petroleum, and natural gas.16-17 Electrochemical systems comprised of unique photonic structures and functions that enable efficient and affordable energy harvesting/conversion/storage are highly desired for providing safe and environment-friendly energy sources. This chapter reviews our recent work of LSPR enabled photoelectrochemical water splitting and recent advances in LSPR-enabled CO2 reduction and photochemical reactions reported in the literature. Scientific and technical challenges of applying LSPR to enhance these energy conversion and storage systems are discussed at the conclusion of this chapter.

Pan, Shanlin↗
DOE OSTI2022

Charge Reservoirs in an Expanded Halide Perovskite Analog: Enhancing High‐Pressure Conductivity through Redox‐Active Molecules

Abstract As halide perovskites and their derivatives are being developed for numerous optoelectronic applications, controlling their electronic doping remains a fundamental challenge. Herein, we describe a novel strategy of using redox‐active organic molecules as stoichiometric electron acceptors. The cavities in the new expanded perovskite analogs (dmpz)[Sn 2 X 6 ], (X=Br − ( 1Br ) and I − ( 1I )) are occupied by dmpz 2+ ( N , N ′‐dimethylpyrazinium), with the LUMOs lying ca. 1 eV above the valence band maximum (VBM). Compressing the metal‐halide framework drives up the VBM in 1I relative to the dmpz LUMO. The electronic conductivity increases by a factor of 10 5 with pressure, reaching 50(17) S cm −1 at 60 GPa, exceeding the high‐pressure conductivities of most halide perovskites. This conductivity enhancement is attributed to an increased hole density created by dmpz 2+ reduction. This work elevates the role of organic cations in 3D metal‐halides, from templating the structure to serving as charge reservoirs for tuning the carrier concentration.

Matheu, Roc↗
DOE OSTI2022

Short-Range Crystalline Order-Tuned Conductivity in Cr 2 Si 2 Te 6 van der Waals Magnetic Crystals

Two-dimensional magnetic materials (2DMMs) are significant not only for studies on the nature of 2D long-range magnetic order but also for future spintronic devices. Of particular interest are 2DMMs where spins can be manipulated by electrical conduction. Whereas Cr 2 Si 2 Te 6 exhibits magnetic order in few-layer crystals, its large band gap inhibits electronic conduction. Here we show that the defect-induced short-range crystal order in Cr 2 Si 2 Te 6 , on the length scale below 0.6 nm, induces a substantially reduced band gap and robust semiconducting behavior down to 2 K that turns to metallic above 10 GPa. Our results in this work will be helpful in designing conducting states in 2DMMs and call for spin-resolved measurement of the electronic structure in exfoliated ultrathin crystals.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗