Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “Fire Containment”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 181 records · Page 10
All sourcesNASA NTRSDOE OSTI
NASA NTRS2021

Risk Reduction of Orion Multi-Purpose Crew Vehicle (MPCV) Program Government-Furnished Equipment for Environmental Control and Life Support (ECLS)

The NASA Engineering and Safety Center (NESC) was requested to conduct technical risk-reduction activities for safety-critical government-furnished environmental control and life support (ECLS) equipment for the Multi-Purpose Crew Vehicle Program. These items include the post-landing anomaly gas monitor, the in-flight anomaly gas monitor, the emergency breathing mask, the 144-hour in-suit survival capability, the portable fire extinguisher, the smoke eater, and the post-landing carbon dioxide control system. This document contains the outcome of the NESC assessment.

Environmental Control and Life Support↗
NASA NTRS2007

Nonequilibrium Stagnation-Line Radiative Heating for Fire II

This paper presents a detailed analysis of the shock-layer radiative heating to the Fire II vehicle using a new air radiation model and a viscous shock-layer flowfield model. This new air radiation model contains the most up-to-date properties for modeling the atomic-line, atomic photoionization, molecular band, and non-Boltzmann processes. The applied viscous shock-layer flowfield analysis contains the same thermophysical properties and nonequilibrium models as the LAURA Navier-Stokes code. Radiation-flowfield coupling, or radiation cooling, is accounted for in detail in this study. It is shown to reduce the radiative heating by about 30% for the peak radiative heating points, while reducing the convective heating only slightly. A detailed review of past Fire II radiative heating studies is presented. It is observed that the scatter in the radiation predicted by these past studies is mostly a result of the different flowfield chemistry models and the treatment of the electronic state populations. The present predictions provide, on average throughout the trajectory, a better comparison with Fire II flight data than any previous study. The magnitude of the vacuum ultraviolet (VUV) contribution to the radiative flux is estimated from the calorimeter measurements. This is achieved using the radiometer measurements and the predicted convective heating. The VUV radiation predicted by the present model agrees well with the VUV contribution inferred from the Fire II calorimeter measurement, although only when radiation-flowfield coupling is accounted for. This agreement provides evidence that the present model accurately models the VUV radiation, which is shown to contribute significantly to the Fire II radiative heating.

Johnston, Christopher O.↗
NASA NTRS1981

Ice/frost detection using millimeter wave radiometry

A series of ice detection tests was performed on the shuttle external tank (ET) and on ET target samples using a 35/95 GHz instrumentation radiometer. Ice was formed using liquid nitrogen and water spray inside a test enclosure containing ET spray on foam insulation samples. During cryogenic fueling operations prior to the shuttle orbiter engine firing tests, ice was formed with freon and water over a one meter square section of the ET LOX tank. Data analysis was performed on the ice signatures, collected by the radiometer, using Georgia Tech computing facilities. Data analysis technique developed include: ice signature images of scanned ET target; pixel temperature contour plots; time correlation of target data with ice present versus no ice formation; and ice signature radiometric temperature statistical data, i.e., mean, variance, and standard deviation.

Gagliano, J. A.↗
NASA NTRS1991

Nonequilibrium chemical and radiation coupling phenomena in AOTV flowfields

A flowfield model for the nonequilibrium stagnation region of high altitude entry vehicles which includes nonequilibrium chemistry, multitemperature, viscous, conduction, and diffusion effects is presented. It contains coupled nongray nonequilibrium radiative transfer for atoms and molecules and local thermodynamic nonequilibrium phenomena. Comparison with Fire 2 flight data verifies that the model is reasonably accurate; and it has been applied to two AFE trajectory points, a high speed return from Mars, a series of points at 80 km for 12 to 16 km/sec, and three altitudes at 16 km/sec. Based on these results shock slip is significant, radiation cooling/coupling is minor at AFE conditions but important by 14 km/sec and dominant at 16 km/sec, radiation for the AFE is small but important and primarily molecular, above 12 km/sec atomic radiation is a significant or dominant portion of the total heating, and local thermodynamic nonequilibrium is important and should be included in all models.

Carlson, Leland A.↗
NASA NTRS2010

Infrared Sensor on Unmanned Aircraft Transmits Time-Critical Wildfire Data

Since 2006, NASA fs Dryden Flight Research Center (DFRC) and Ames Research Center have been perfecting and demonstrating a new capability for geolocation of wildfires and the real-time delivery of data to firefighters. Managed for the Western States Fire Mission, the Ames-developed Autonomous Modular Scanner (AMS), mounted beneath a wing of DFRC fs MQ-9 Ikhana remotely piloted aircraft, contains an infrared sensor capable of discriminating temperatures within 0.5 F (approx. = 0.3 C), up to 1,000 F (approx. = 540 C). The AMS operates like a digital camera with specialized filters to detect light energy at visible, infrared, and thermal wavelengths. By placing the AMS aboard unmanned aircraft, one can gather information and imaging for thousands of square miles, and provide critical information about the location, size, and terrain around fires to commanders in the field. In the hands of operational agencies, the benefits of this NASA research and development effort can support nationwide wildfire fighting efforts. The sensor also provides data for post-burn and vegetation regrowth analyses. The MQ-9 Unmanned Aircraft System (UAS), a version of the Predator-B, can operate over long distances, staying aloft for over 24 hours, and controlled via a satellite-linked command and control system. This same link is used to deliver the fire location data directly to fire incident commanders, in less than 10 minutes from the time of overflight. In the current method, similarly equipped short-duration manned aircraft, with limited endurance and range, must land, hand-carry, and process data, and then deliver information to the firefighters, sometimes taking several hours in the process. Meanwhile, many fires would have moved over great distances and changed direction. Speed is critical. The fire incident commanders must assess a very dynamic situation, and task resources such as people, ground equipment, and retardant-dropping aircraft, often in mountainous terrain obscured by dense smoke.

Pestana, Mark↗
NASA NTRS2000

Environmentally Compliant Disposal Method for Heavy Metal Containing Propellants

ABSTRACT An environmentally friendly, cost effective technology has been developed and demonstrated by a team of Naval Air Warfare Center and Lockheed Martin personnel to dispose of Shillelagh solid rocket motor propellants. The Shillelagh is a surface to surface anti-tank weapon approaching the end of its service life. The current demilitarization process employs open detonation, but the presence of lead stearate in the N5 propellant grain motivated the need for the development of an environmentally friendly disposal method. Contained burning of the propellant followed by propellant exhaust processing was chosen as the disposal methodology. The developmental test bed, completed in February 1998, is inexpensive and transportable. Contained burning of Shillelagh propellants posed two technical hurdles: 1) removal of the sub micron lead and cadmium particulate generated during combustion, and 2) secondary combustion of the significant quantifies of carbon monoxide and hydrogen. A firing chamber with a stepped nozzle, air injection, and active ignition was developed to combust the carbon monoxide and hydrogen in real time. The hot gases and particulates from the combustion process are completely contained within a gas holder. The gases are subsequently cooled and routed through a treatment facility to remove the heavy metal particulate. Results indicate that the lead and cadmium particulates are removed below their respective detection limits (2 micro-g/cu m & 0.2 micro-g/cu m) of the analytical procedures employed and that the carbon monoxide and hydrogen levels have been reduced well below the lower flammability limits. Organic concentrations, principally benzene, are I ppm or less. A semi-automated machine has been developed which can rapidly prepare Shillelagh missiles for the contained burn facility. This machine allows the contained burn technology to be more competitive with current open bum open detonation disposal rates.

Decker, M. W.↗
NASA NTRS2011

Validation and Simulation of ARES I Scale Model Acoustic Test -1- Pathfinder Development

The Ares I Scale Model Acoustics Test (ASMAT) is a series of live-fire tests of scaled rocket motors meant to simulate the conditions of the Ares I launch configuration. These tests have provided a well documented set of high fidelity measurements useful for validation including data taken over a range of test conditions and containing phenomena like Ignition Over-Pressure and water suppression of acoustics. To take advantage of this data, a digital representation of the ASMAT test setup has been constructed and test firings of the motor have been simulated using the Loci/CHEM computational fluid dynamics software. Within this first of a series of papers, results from ASMAT simulations with the rocket in a held down configuration and without water suppression have then been compared to acoustic data collected from similar live-fire tests to assess the accuracy of the simulations. Detailed evaluations of the mesh features, mesh length scales relative to acoustic signals, Courant-Friedrichs-Lewy numbers, and spatial residual sources have been performed to support this assessment. Results of acoustic comparisons have shown good correlation with the amplitude and temporal shape of pressure features and reasonable spectral accuracy up to approximately 1000 Hz. Major plume and acoustic features have been well captured including the plume shock structure, the igniter pulse transient, and the ignition overpressure. Finally, acoustic propagation patterns illustrated a previously unconsidered issue of tower placement inline with the high intensity overpressure propagation path.

Putnam, G. C.↗
NASA NTRS1984

Transportable Pumps Could Save Oil Cargoes

Transportable pumps designed for firefighting used to salvage crude oil from tankships leaking, burning, or grounded. Pump incorporated into self-contained transportable module along with engine and controls. Module carried by helicopter, boat, or van to site of fire provides large quantities of water at high pressure in firefighting mode or pump oil into barge in salvage mode.

Burns, R.↗
NASA NTRS1990

Characterization of supercooled liquid water in cirrus clouds from FIRE ETO lidar observations

The various modes of occurrence of supercooled liquid water in cirrus clouds are discussed using the data from the FIRE extended time observations (ETO). Results from lidar observations show that cirrus cloud scenes viewed from satellites may contain mixtures of 'high' and 'middle' cloud varieties, which affect the assessment of the derived cirrus cloud properties.

Sassen, Kenneth↗
NASA NTRS2004

Emergency Response Manual

Safety and security is very important at NASA. The Security Management and Safeguards Office goal is ensure safety and security for all NASA Lewis and Plum Brook Station visitors and workers. The office protects against theft, sabotage, malicious damage, espionage, and other threats or acts of violence. There are three types of security at NASA: physical, IT, and personnel. IT is concerned with sensitive and classified information and computers. Physical security includes the officers who check visitors and workers in and patrol the facility. Personnel security is concerned with background checks during hiring. During my internship, I met people from and gained knowledge about all three types of security. I primarily worked with Dr. Richard Soppet in physical security. During my experience with physical security, I observed and worked with many aspects of it. I attended various security meetings at both NASA Lewis and Plum Brook. The meetings were about homeland security and other improvements that will be made to both facilities. I also spent time with a locksmith. The locksmith makes copies of keys and unlocks doors for people who need them. I rode around in a security vehicle with an officer as he patrolled. I also observed the officer make a search of a visitor s vehicle. All visitors vehicles are searched upon entering NASA. I spent time and observed in the dispatch office. The officer answers calls and sends out officers when needed. The officer also monitors the security cameras. My primary task was completing an emergency response manual. This manual would assist local law enforcement and fire agencies in case of an emergency. The manual has pictures and descriptions of the buildings. It also contains the information about hazards inside of the buildings. This information will be very helpul to law enforcement so that when called upon during an emergency, they will not create an even bigger problem with collateral damage.

Barnett, Traci M.↗
NASA NTRS2011

Flying Unmanned Aircraft: A Pilot's Perspective

The National Aeronautics and Space Administration (NASA) is pioneering various Unmanned Aircraft System (UAS) technologies and procedures which may enable routine access to the National Airspace System (NAS), with an aim for Next Gen NAS. These tools will aid in the development of technologies and integrated capabilities that will enable high value missions for science, security, and defense, and open the door to low-cost, extreme-duration, stratospheric flight. A century of aviation evolution has resulted in accepted standards and best practices in the design of human-machine interfaces, the displays and controls of which serve to optimize safe and efficient flight operations and situational awareness. The current proliferation of non-standard, aircraft-specific flight crew interfaces in UAS, coupled with the inherent limitations of operating UAS without in-situ sensory input and feedback (aural, visual, and vestibular cues), has increased the risk of mishaps associated with the design of the "cockpit." The examples of current non- or sub- standard design features range from "annoying" and "inefficient", to those that are difficult to manipulate or interpret in a timely manner, as well as to those that are "burdensome" and "unsafe." A concerted effort is required to establish best practices and standards for the human-machine interfaces, for the pilot as well as the air traffic controller. In addition, roles, responsibilities, knowledge, and skill sets are subject to redefining the terms, "pilot" and "air traffic controller", with respect to operating UAS, especially in the Next-Gen NAS. The knowledge, skill sets, training, and qualification standards for UAS operations must be established, and reflect the aircraft-specific human-machine interfaces and control methods. NASA s recent experiences flying its MQ-9 Ikhana in the NAS for extended duration, has enabled both NASA and the FAA to realize the full potential for UAS, as well as understand the implications of current limitations. Ikhana is a Predator-B/Reaper UAS, built by General Atomics, Aeronautical Systems, Inc., and modified for research. Since 2007, the aircraft has been flown seasonally with a wing-mounted pod containing an infrared scanner, utilized to provide real-time wildfire geo-location data to various fire-fighting agencies in the western U.S. The multi-agency effort included an extensive process to obtain flight clearance from the FAA to operate under special provisions, given that UAS in general do not fully comply with current airspace regulations (e.g. sense-and-avoid requirements).

Pestana, Mark E.↗
NASA NTRS2011

Simulation of Acoustics for Ares I Scale Model Acoustic Tests

The Ares I Scale Model Acoustics Test (ASMAT) is a series of live-fire tests of scaled rocket motors meant to simulate the conditions of the Ares I launch configuration. These tests have provided a well documented set of high fidelity acoustic measurements useful for validation including data taken over a range of test conditions and containing phenomena like Ignition Over-Pressure and water suppression of acoustics. To take advantage of this data, a digital representation of the ASMAT test setup has been constructed and test firings of the motor have been simulated using the Loci/CHEM computational fluid dynamics software. Results from ASMAT simulations with the rocket in both held down and elevated configurations, as well as with and without water suppression have been compared to acoustic data collected from similar live-fire tests. Results of acoustic comparisons have shown good correlation with the amplitude and temporal shape of pressure features and reasonable spectral accuracy up to approximately 1000 Hz. Major plume and acoustic features have been well captured including the plume shock structure, the igniter pulse transient, and the ignition overpressure.

Putnam, Gabriel↗
NASA NTRS1993

Remote sensing of multilevel clouds during FIRE IFO 2

An unresolved difficulty in the remote sensing of clouds concerns the inability of the cloud retrieval algorithms to adequately recognize and analyze scenes containing overlapping cloud layers. Most cloud retrieval schemes, such as that used by the International Satellite Cloud Climatology Project (ISCCP) assume that each picture element (pixel) contains a single cloud layer. The current study begins to address the complexities of multilayered cloud property retrieval through the application of a modified multispectral, multiresolution (MSMR) method, first detailed in Baum et al. (1992), which merges 1.1 -km (at nadir) spectral data from the Advanced Very High Resolution Radiometer (AVHRR) with 17.4-km (at nadir) High Resolution Infrared Radiometer Sounder (HIRS/2, henceforth HIRS). Both instruments are flown aboard the National Oceanic and Atmospheric Administration (NOAA) polar-orbiting platforms. An ideal case study for this investigation is provided by the NOAA-11 overpass at 20:48 UTC on November 28, 1991. At this time, a large-scale cirrostratus veil overlaid a low-level stratus deck over much of the IFO region. There were both surface lidar and radar observations of the clouds as well as University of North Dakota (UND) Citation aircraft measurements. The presence of overlapping cloud layers within a HIRS FOV is determined from colocated AVHRR spectral data through the use of a fuzzy logic expert system. Conventional algorithms such as spatial coherence and CO2 slicing are used to retrieve cloud pressure and height for each identified cloud layer. The results from the satellite cloud retrieval analysis are compared to results from both surface- and aircraft-based measurements.

Baum, Bryan A.↗
NASA NTRS1981

Fillers for improved graphite fiber retention by polymer matrix composites

The results of a program designed to determine the extent to which elemental boron and boron containing fillers added to the matrix resin of graphite/epoxy composites prevent the release of graphite fibers when the composites are exposed to fire and impact conditions are described. The fillers evaluated were boron, boron carbide and aluminum boride. The conditions evaluated were laboratory simulations of those that could exist in the event of an aircraft crash and burn situation. The baseline (i.e., unfilled) laminates evaluated were prepared from commercially available graphite/epoxy. The baseline and filled laminates' mechanical properties, before and after isothermal and humidity aging, also were compared. It was found that a small amount of graphite fiber was released from the baseline graphite/epoxy laminates during the burn and impact conditions used in this program. However, the extent to which the fibers were released is not considered a severe enough problem to preclude the use of graphite reinforced composites in civil aircraft structure. It also was found that the addition of boron and boron containing fillers to the resin matrix eliminated this fiber release. Mechanical properties of laminates containing the boron and boron containing fillers were lower than those of the baseline laminates. These property degradations for two systems: boron (5 micron) at 2.5 percent filler loading, and boron (5 micron) at 5.0 percent filler loading do not appear severe enough to preclude their use in structural composite applications.

House, E. E.↗
NASA NTRS1979

Particle dynamics associated with the space environment

A major factor in dust dynamics in a microgravity environment is the absence of settling; hence, Spacelab air will contain larger particles than a comparable laboratory on earth. In addition, the presence of low level acceleration fluctuations (thruster firings, crew motions, etc.) could inhibit dust removal by surface scavenging. Because of the presence of larger particles, aerosol dynamics at larger Reynolds numbers must be considered. An accurate drag coefficient for spherical particles was developed for the higher Reynolds number phenomena. A general graphic correlation for the drag coefficient as a function of Reynolds and Knudsen numbers was developed based on currently available drag data for spheres. The general equations that govern dust dynamics were reviewed.

Sandborn, V. A.↗
NASA NTRS1992

CSU FIRE 2 cirrus field experiment: Description of field deployment phase

The Colorado State University (CSU) surface observing systems are described. These systems were deployed at the Parsons, Kansas site during the FIRE 2 Cirrus Special Observing Period (SOP) from 13 Nov. - 7 Dec. 1991. The geographical coordinates of the site containing most of the CSU instrumentation are 37 deg. 18 min N. latitude and 96 deg. 30 min. W. longitude; site elevation was 269 meters. In addition, one surface meteorological and broadband flux observing site was maintained at the Tri City Airport which is approximately 18 miles due west of Parsons (37 deg. 20 min. N. latitude, 95 deg. 30 min. 30 sec. W. longitude). A map of the locations of the CSU deployment sites is presented. At the main Parsons site, the instrumentation was located directly adjacent to and north of a lake. Under most cirrus observing conditions, when the wing had a significant southernly component, the lake was upwind of the observing site. The measurements and observations collected during the experiment are listed. These measurements may be grouped into five categories: surface meteorology; infrared spectral and broadband measurements; solar spectral and broadband measurements; upper air measurements; and cloud measurements. A summary of observations collected at the Parsons site during the SOP are presented. The wind profiler, laser ceilometer, surface meteorology and surface broadband radiation instrumentation were operated on a continuous basis. All other systems were operated on an 'on demand' basis when cloud conditions merited the collection of data.

Cox, S.↗
NASA NTRS2003

Superior Ballistic Impact Resistance Achieved by the Co-Base Alloy Haynes 25

The fan case in a jet engine is required to contain a fan blade in the rare event of a blade loss during operation. Because of its function, the fan case is the largest structural component in high-bypass-ratio turbofan engines used in commercial aircraft. Therefore, the use of lighter and stronger materials would be advantageous in most engines and is practically a necessity in the latest generation of high-bypass engines. Small panels, 7 in. wide by 7 in. long, of a number of metallic alloys were impact tested at room temperature with a 0.50-caliber blunt-nose titanium alloy projectile at the NASA Glenn Research Center (ref. 1). These metallic systems included several high-strength aluminum (Al) alloys, Al-based laminates, aluminum metal matrix composites (Al-MMCs), nickel-base superalloys (Inconel 718 and 625), several titanium (Ti) alloys in different heat treated conditions, 304L stainless steel, a stainless-steel-based laminate, and a high strength steel (Nitronic 60). It was determined that a simple Co-base alloy (Haynes 25) had the best impact resistance on an areal weight basis. Haynes 25 was at least 10 percent better than IMI 550, the best titanium alloy tested to date, and it was far superior to other metals, especially at higher impact velocities (greater than 1100 ft/sec). Because this material could be ideal for fan containment applications in supersonic aircraft as a replacement for titanium, impact tests were also conducted at 371 oC and compared with results from alloys tested at elevated temperature under previous programs (i.e., Inconel 718, Ti-6242, M-152, Timetal 21S, and Aeromet 100). Although cobalt-base alloys are used in some high-temperature engine applications, to our knowledge they are not used in any containment systems. Advantages of cobalt over titanium include lower cost, easier processing, better high-temperature strength, and no fire hazard if tip rub occurs. Future plans include testing of lightweight sandwich panels with Haynes 25 as a core material in the form of a foam or lattice block structure and scaling up the current tests by using blade-simulating projectiles impacting large plates and half rings.

Hebsur, Mohan G.↗
NASA NTRS2006

Estimating tropical-forest density profiles from multibaseline interferometric SAR

Vertical profiles of forest density are potentially robust indicators of forest biomass, fire susceptibility and ecosystem function. Tropical forests, which are among the most dense and complicated targets for remote sensing, contain about 45% of the world's biomass. Remote sensing of tropical forest structure is therefore an important component to global biomass and carbon monitoring. This paper shows preliminary results of a multibasline interfereomtric SAR (InSAR) experiment over primary, secondary, and selectively logged forests at La Selva Biological Station in Costa Rica. The profile shown results from inverse Fourier transforming 8 of the 18 baselines acquired. A profile is shown compared to lidar and field measurements. Results are highly preliminary and for qualitative assessment only. Parameter estimation will eventually replace Fourier inversion as the means to producing profiles.

profiles↗