Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “Atomic Interface”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 181 records · Page 10

Polyphenol-Sensitized Atomic Layer Deposition for Membrane Interface Hydrophilization

Improvements in energy-water systems will necessitate fabrication of high-performance separation membranes. To this end, interface engineering is a powerful tool for tailoring properties, and atomic layer deposition (ALD) has recently emerged as a promising and versatile approach. However, most non-polar polymeric membranes are not amenable to ALD processing due to the absence of nucleation sites. Here, a sensitization strategy for ALD-coating is presented, illustrated by membrane interface hydrophilization. Facile dip-coating with polyphenols effectively sensitizes hydrophobic polymer membranes to TiO2 ALD coating. Tannic acid-sensitized ALD-coated membranes exhibit outstanding underwater crude oil repulsion and rigorous mechanical stability through bending and rinsing tests. As a result, these membranes demonstrate outstanding crude oil-in-water separation and reusability compared to untreated membranes or those treated with ALD without polyphenol pretreatment. A possible polyphenol-sensitized ALD mechanism is proposed involving initial island nucleation followed by film intergrowth. This polyphenol sensitization strategy enriches the functionalization toolbox in material science, interface engineering, and environmental science.

36 MATERIALS SCIENCE↗

Atom-probe tomographic study of interfaces of Cu{sub 2}ZnSnS{sub 4} photovoltaic cells

The heterophase interfaces between the CdS buffer layer and the Cu{sub 2}ZnSnS{sub 4} (CZTS) absorption layers are one of the main factors affecting photovoltaic performance of CZTS cells. We have studied the compositional distributions at heterophase interfaces in CZTS cells using three-dimensional atom-probe tomography. The results demonstrate: (a) diffusion of Cd into the CZTS layer; (b) segregation of Zn at the CdS/CZTS interface; and (c) a change of oxygen and hydrogen concentrations in the CdS layer depending on the heat treatment. Annealing at 573 K after deposition of CdS improves the photovoltaic properties of CZTS cells probably because of the formation of a heterophase epitaxial junction at the CdS/CZTS interface. Conversely, segregation of Zn at the CdS/CZTS interface after annealing at a higher temperature deteriorates the photovoltaic properties.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Platinum/yttrium iron garnet inverted structures for spin current transport

30-80 nm thick yttrium iron garnet (YIG) films are grown by pulsed laser deposition on a 5 nm thick sputtered Pt atop gadolinium gallium garnet substrate (GGG) (110). Upon post-growth rapid thermal annealing, single crystal YIG(110) emerges as if it were epitaxially grown on GGG(110) despite the presence of the intermediate Pt film. The YIG surface shows atomic steps with the root-mean-square roughness of 0.12 nm on flat terraces. Both Pt/YIG and GGG/Pt interfaces are atomically sharp. The resulting YIG(110) films show clear in-plane uniaxial magnetic anisotropy with a well-defined easy axis along 〈001〉 and a peak-to-peak ferromagnetic resonance linewidth of 7.5 Oe at 9.32 GHz, similar to YIG epitaxially grown on GGG. Both spin Hall magnetoresistance and longitudinal spin Seebeck effects in the inverted bilayers indicate excellent Pt/YIG interface quality.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Water Structure at Hematite-Water Interfaces

The atomic-level structure of water at mineral surfaces is an important controlling factor in interfacial reactions such as foreign ion incorporation, crystal growth and dissolution, and redox reactions. Molecular dynamics simulations with four different models based on interatomic potentials have been carried out to determine the atomic-level structure of three hematite-water interfaces. In addition, for each of the three surfaces, different terminations or protonation schemes were considered. The availability of surface X-ray scattering data for the surfaces considered here allowed for an extensive comparison with experimental data. Qualitatively, with the exception of one termination with one model, all models predict the correct arrangement of water molecules at the interface. Quantitatively, the agreement with experimental positions, distances, and layer occupancies is good to excellent, especially given the range of values reported in published experimental studies. Therefore, this study provides further evidence that interatomic potential models can be used to reliably predict the structure of mineral-water interfaces. In addition, molecular simulations are a valuable source of information to complement surface X-ray scattering experiments owing to their ability to directly determine the position of hydrogen atoms and to yield three-dimensional predicted structures at no added cost, as demonstrated in this work. Indeed, the molecular dynamics trajectories were analyzed to determine the surface structural controls on the interfacial water structure. Each of the three surface functional groups present at the surfaces considered in this work, namely, triply-coordinated oxo, doubly-coordinated hydroxo, and singly-coordinated aquo groups, was found to form similar hydrogen bond configurations with adsorbed water molecules at all surfaces. Oxo groups accept long-lasting and linear hydrogen bonds from adsorbed water molecules; hydroxo groups can form hydrogen bonds with other surface functional groups as well as with adsorbed water molecules; and aquo groups normally only donate hydrogen bonds to other surface groups or adsorbed water molecules. Additionally, the majority of adsorbed water molecules were found to adopt multiple configurations and orientations. This information was used to evaluate three-dimensional structural models of the interfaces, which were previously derived experimentally from one-dimensional electron density profiles and steric considerations.

08 HYDROGEN↗

Electron transfer and ionic displacements as the origin of the 2D electron gas at the LAO/STO interface: Direct measurements with atomic-column spatial resolution.

We present direct, atomic-column-resolved scanning transmission electron microscopy and electron energy loss measurements of atomic displacements and Ti valence in abrupt, conductive LAO/STO interfaces. We find that two distinct but interrelated mechanisms are responsible for screening the diverging electric potential in the LAO film: 1) charge injection in the interfacial Ti planes, and 2) dielectric relaxation in both LAO and STO through ionic displacements. The injected charge density decays over a length of nearly 3 unit cells within the STO substrate. The total injected charge is lower than predicted by pure electronic reconstruction. The origin of this discrepancy is attributed to cation and oxygen displacements, which we observe in both LAO and STO, and generate a polarization opposite to the intrinsic polarization of the LAO film. Our data attribute a minor role to oxygen vacancies and cation intermixing.

36 MATERIALS SCIENCE↗

Atomic-scale chemical quantification of oxide interfaces using energy-dispersive X-ray spectroscopy

Atomic-scale quantification of chemical composition across oxide interfaces is important for understanding physical properties of epitaxial oxide nanostructures. Energy-dispersive X-ray spectroscopy (EDS) in an aberration-corrected scanning transmission electron microscope was used to quantify chemical composition across the interface of ferromagnetic La{sub 0.7}Sr{sub 0.3}MnO{sub 3} and antiferromagnetic BiFeO{sub 3} quantum structure. This research demonstrates that chemical composition at atomic columns can be quantified by Gaussian peak-fitting of EDS compositional profiles across the interface. Cation diffusion was observed at both A- and B-sublattice sites; and asymmetric chemical profiles exist across the interface, consistent with the previous studies.

36 MATERIALS SCIENCE↗

A model of formation of fixed charge in thermal silicon dioxide

A quantitative model of formation of fixed charge (Q{sub f}) in silicon dioxide during thermal oxidation of silicon is developed. The value of Q{sub f} is governed by the number of interstitial silicon atoms in the vicinity of the Si-SiO{sub 2} interface; these atoms are formed as a result of the processes of their generation and recombination at the interface and also due to their diffusion to the depth of dioxide. The model makes it possible to describe a decrease in the fixed charge as the oxidation temperature is increased and in the case of annealing in neutral media for silicon dioxide on silicon with orientations (100) and (111) in a wide range of temperatures.

36 MATERIALS SCIENCE↗

Ab Initio Study of Energetics, Charge Transfer, and Atomic Structures of FCC Fe/NbC Interfaces with and Without N Doping: From Coherent to Semi-coherent Interfaces

Nitrogen is added to stainless steels to improve their toughness and corrosion resistance. However, it is not well understood how nitrogen may impact the precipitate/matrix interfacial properties. In this work, we consider the (FCC) Fe (001)/NbC (001) interface as a model system to study how interfacial structure, energy, and electron charge are affected by nitrogen using DFT calculations. We compare the structures and energetics of coherent and semi-coherent interfaces by including the elastic contribution component. It is found that nitrogen does not have a significant effect on either the interfacial energy or the atomic arrangement near the interface region. A highly intricate bonding feature is revealed near heterophase interfaces between alloy elements, in which metallic and covalent features are present together with charge transfer. Additionally, the work on determining accurate interfacial energies is at the core of all quantitative precipitation modeling efforts (in particular, in the XMAT Program). In turn, nucleation, growth/dissolution, and coarsening of precipitates contribute critically to the material’s ability to withstand creep, creep fatigue, and other detrimental processes reducing its service life. It is for this reason that developing quantitative understanding of interfaces and their energetics in materials is so important for their development and further improvement.

36 MATERIALS SCIENCE↗

The effect of grading the atomic number at resistive guide element interface on magnetic collimation

Using 3 dimensional numerical simulations, this paper shows that grading the atomic number and thus the resistivity at the interface between an embedded high atomic number guide element and a lower atomic number substrate enhances the growth of a resistive magnetic field. This can lead to a large integrated magnetic flux density, which is fundamental to confining higher energy fast electrons. This results in significant improvements in both magnetic collimation and fast-electron-temperature uniformity across the guiding. The graded interface target provides a method for resistive guiding that is tolerant to laser pointing.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Control of Epitaxial BaFe 2 As 2 Atomic Configurations with Substrate Surface Terminations

Atomic layer controlled growth of epitaxial thin films of unconventional superconductors opens the opportunity to discover novel high temperature superconductors. For instance, the interfacial atomic configurations may play an important role in superconducting behavior of monolayer FeSe on SrTiO 3 and other Fe-based superconducting thin films. Here, we demonstrate a selective control of the atomic configurations in Co-doped BaFe 2 As 2 epitaxial thin films and its strong influence on superconducting transition temperatures by manipulating surface termination of (001) SrTiO 3 substrates. In a combination of first-principles calculations and high-resolution scanning transmission electron microscopy imaging, we show that Co-doped BaFe 2 As 2 on TiO 2 -terminated SrTiO 3 is a tetragonal structure with an atomically sharp interface and with an initial Ba layer. In contrast, Co-doped BaFe 2 As 2 on SrO-terminated SrTiO 3 has a monoclinic distortion and a BaFeO 3-x initial layer. Furthermore, the superconducting transition temperature of Co-doped BaFe 2 As 2 ultrathin films on TiO 2 -terminated SrTiO 3 is significantly higher than that on SrO-terminated SrTiO 3 , which we attribute to shaper interfaces with no lattice distortions. As a result, this study allows the design of the interfacial atomic configurations and the effects of the interface on superconductivity in Fe-based superconductors.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗