Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “ANTIMONIDES”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 181 records · Page 10

Thermoelectric properties of InSb〈Zn〉 in nanoporous glass

Nanowire structures of zinc-doped indium antimonide are fabricated. These structures are formed in porous glass with characteristic pore sizes of ~7 nm. The temperature dependences of the electrical conductivity, Seebeck coefficient, and current–voltage characteristics are studied. An increase in the InSb Seebeck coefficient in porous glass in comparison with that of the bulk material is detected for the first time.

36 MATERIALS SCIENCE↗

Quasi-Classical Model of the Static Electrical Conductivity of Heavily Doped Degenerate Semiconductors at Low Temperatures

Germanium, silicon, gallium arsenide, and indium antimonide n-type crystals on the metal side of the insulator–metal transition (Mott transition) are considered. In the quasi-classical approximation, the static (direct current) electrical conductivity and the drift mobility of electrons of the c band, and electrostatic fluctuations of their potential energy and the mobility edge are calculated. It is considered that a single event of the elastic Coulomb scattering of a mobile electron occurs only in a spherical region of the crystal matrix with an impurity ion at the center. The results of calculations using the proposed formulas without using fitting parameters are numerically consistent with experimental data in a wide range of concentrations of hydrogenlike donors at their weak and moderate compensation by acceptors.

36 MATERIALS SCIENCE↗

Determining the Concentration of Free Electrons in n-InSb from Far-Infrared Reflectance Spectra with Allowance for Plasmon–Phonon Coupling

Contactless nondestructive testing is a means for determining the concentration of free electrons N in indium antimonide (InSb) samples from far-infrared reflectance spectra recorded at room temperature. A computer program capable of determining the characteristic wave number from the Kramers–Kronig relation is developed. The calculated calibration dependence makes it possible to determine the electron concentration from the known characteristic wave number. It is shown that this dependence is described by a cubic polynomial. In the calculations, the energy dependence of the electron effective mass is taken into account. It is established that, in determining the electron concentration, account must be taken of plasmon–phonon coupling, specifically at N ≤ 5 × 10{sup 17} cm{sup –3}. The systematic error introduced into the determination of N by disregard of plasmon–phonon coupling is estimated. The software elaborated here makes it possible to calculate the electron concentration N from experimental reflectance spectra and to store and process the results. The software is tested by the example of the reflectance spectrum of heavily doped n-InSb.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Spin–Orbit Interaction and Carrier Mobility in a Longitudinal InSb Autosoliton under a Magnetic Field

A version of the spin–orbit interaction of orbitally moving and spin-oriented electrons in a longitudinal autosoliton in indium antimonide under a longitudinal magnetic field is proposed and considered. The additional energy gained by spin–orbit electrons due to this interaction is determined. Expressions for the change in the mobility during the orbital motion of electrons under a magnetic field and the additive mobility of spin-oriented electrons are derived and calculated. The coefficients of the mutual influence of changing electron mobility in the case of orbital motion and the additive mobility of spin-oriented electrons are calculated.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Magnetization and Giant Magnetoresistance of Polycrystalline TbSb at Low Temperatures

Dependences of the magnetization M and the resistance R on the temperature T in the range from 2 to 300 K and on the magnetic field H up to 14 T were investigated in polycrystalline samples of terbium antimonide TbSb. A peculiarity (bending) was observed on the M(H) dependences at each temperature below the transition point of TbSb into the antiferromagnetic phase (T{sub N} = 14.8 K), which is due to a metamagnetic phase transition. Positive giant magnetoresistance was found in TbSb near the antiferromagnetic phase region.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Mechanisms of Current Transfer in Electrodeposited Layers of Submicron Semiconductor Particles

Current–voltage (I–V) characteristics of conductance in multigrain layers of submicron particles of silicon, gallium arsenide, indium arsenide, and indium antimonide have been studied. Nanoparticles of all semiconductors were obtained by processing initial single crystals in a ball mill and applied after sedimentation onto substrates by means of electrodeposition. Detailed analysis of the I–V curves of electrodeposited layers shows that their behavior is determined by the mechanism of intergranular tunneling emission from near-surface electron states of submicron particles. Parameters of this emission process have been determined. The proposed multigrain semiconductor structures can be used in gas sensors, optical detectors, IR imagers, etc.

77 NANOSCIENCE AND NANOTECHNOLOGY↗

High Efficiency Visible Photocathode Development

The alkali antimonides are of significant interest to the accelerator community, as they have a high quantum efficiency (QE) under illumination by green light. These cathodes are attractive for high-average-current photoinjector applications and understanding their fundamental properties are critical to the production of long lived, reliable cathodes. We report on ongoing work to characterize cathode formation during growth. In-situ X-ray Diffraction (XRD) has been used to compare grain size and texture in antimony layers, and X-ray Photoelectron Spectroscopy (XPS) has been used to investigate the solid-state chemistry of cathode formation.

36 MATERIALS SCIENCE↗

Gallium substitutions as a means to stabilize alkaline-earth and rare-earth metal pnictides with the cubic Th{sub 3}P{sub 4} type: Synthesis and structure of A{sub 7}Ga{sub 2}Sb{sub 6} (A=Sr, Ba, Eu)

Three new compounds-Sr{sub 7.04(2)}Ga{sub 1.94(2)}Sb{sub 6}, Ba{sub 7.02(3)}Ga{sub 1.98(3)}Sb{sub 6} and Eu{sub 7.04(3)}Ga{sub 1.90(3)}Sb{sub 6}-have been synthesized from reactions of the corresponding elements using gallium as a metal flux. Their crystal structures (space group I4-bar 3d (No. 220), Z=2 with unit cell parameters: a=9.9147(9) A for the Sr-compound; a=10.3190(9) A for the Ba-compound; and a=9.7866(8) A for the Eu-compound) have been established by single-crystal X-ray diffraction. The structures are best described as Ga-stabilized derivatives of the hypothetical Sr{sub 4}Sb{sub 3}, Ba{sub 4}Sb{sub 3} and Eu{sub 4}Sb{sub 3} phases with the cubic Th{sub 3}P{sub 4} type. Such an inclusion of interstitial Ga atoms in this atomic arrangement results in the formation of isolated [Ga{sub 2}Sb{sub 6}]{sup 14-} fragments, isoelectronic and isostructural with the [Sn{sub 2}Te{sub 6}]{sup 6-} anions in the K{sub 3}SnTe{sub 3} type, and allows for the attainment of a charge-balanced electron count. In that sense, the Sr{sub 4}Sb{sub 3}, Ba{sub 4}Sb{sub 3} and Eu{sub 4}Sb{sub 3} binaries, which are expected to be electron-deficient and are currently unknown, can be 'turned' into Sr{sub 7}Ga{sub 2}Sb{sub 6}, Ba{sub 7}Ga{sub 2}Sb{sub 6} and Eu{sub 7}Ga{sub 2}Sb{sub 6}, whose structures are readily rationalized following the Zintl concept. - Graphical abstract: Three new antimonides have been structurally characterized by single-crystal X-ray diffraction. Their structures are best described as derivatives of the body-centered cubic, anti-Th{sub 3}P{sub 4} type. Unlike the one-electron-deficient A{sub 4}Sb{sub 3} phases (A=Sr, Ba, Eu), the new, A{sub 7}Ga{sub 2}Sb{sub 6} compounds are Zintl phases with closed-shell configurations for both the cations and anions.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Thin Film Solid State Active Dosimetry

With the many advances in semiconductor manufacturing, the pool of available materials for use in their production also continues to broaden. One such example is aluminum antimonide (AlSb). Its promising properties for radiation detection have attracted multiple researchers, and allow for the possibility that it may be a high resolution, room temperature x-ray/gamma detector. Antimony has an atomic number of 51 (Z=51) and is responsible for the majority of photon interactions. Furthermore, the mass attenuation coefficient is comparable with other well-known solid state gamma detectors such as CZT. With a band gap of 1.6 eV (CZT=1.5 eV), low leakage current at room temperature is expected, and high charge carrier statistics from radiation interactions can be expected. Charge carrier statistics are driven by high charge mobility (μ) and lifetime (τ). μτ for CZT is on the order of 5x10{sup -3} cm{sup 2}/V for electrons, but two orders of magnitude smaller for holes. This results in large variations in detector pulse height depending on the location of interaction (close to the anode vs. close to the cathode). Theoretically, AlSb should exhibit much more symmetric electron and hole properties near 5x10{sup -3} cm{sup 2}/V. According to the Hecht relation, this should produce a more uniform detector response and increase the number of generated charge carriers, improving resolution. An added benefit is that AlSb can be grown directly onto Si substrates, enabling fully integrated circuit board-level sensors. However, several characteristic properties remain unknown and inconsistent published results due to difficulties in producing the material. Difficulties in bulk growth methods (material interactions with growth hardware such as crystals and air) resulted in high levels of defects. The use of AlSb in optoelectronics from thin film growth methods has been documented, including growth directly onto Si, and provides the potential for much more controlled material. In our work we use thin film growth of AlSb geared towards high quality material for understanding the properties for radiation detection. (authors)

36 MATERIALS SCIENCE↗

Measurements of High-Field THz Induced Photocurrents in Semiconductors

THz pulses have provided a useful tool for probing, with time resolution, the free carriers in a system. The development of methods to produce intense THz radiation has been slow since spectroscopists and condensed matter physicists first began probing materials with THz pulses. We have developed a method for producing intense ultra-short THz pulses, which have full width half maximum of 300 fs - approximately a half cycle of THz radiation. These intense half cycle pulses (HCPs) allow us to use THz radiation not only as a probe of the free carriers in a system but also as a source of excitation to alter a system in some way. In particular, HPCs perturb free carriers considerably in short time scales but show minimal effect to individual free carriers over long time. By exposing the semiconductor indium antimonide (InSb) to our intense THz HCP radiation, we have observed non-linear optical effects which suggest the generation of new free carriers by below band-gap THz photons. This generation of free carriers appears to be caused by an avalanche multiplication process, which should amplify the number of free carriers already in the system and then induce a current in the timescale of our THz pulse. This amplification on such a short timescale suggests the possibility of an ultra-fast detector of weak above band-gap radiation. We constructed a device which detects these currents by painting an electrode structure on the surface of the semiconductor. The currents induced across the electrodes by this avalanche multiplication process were measured and compared with other measurements of this non-linear optical process. We successfully measured THz induced currents in InSb, which indicate promise towards the development of an ultra-fast detector, and we gain insight into a possible physical explanation of the THz induced free carriers we observe in InSb.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗

Electronic Structure and Epitaxy of CdTe Shells on InSb Nanowires

Abstract Indium antimonide (InSb) nanowires are used as building blocks for quantum devices because of their unique properties, that is, strong spin‐orbit interaction and large Landé g‐factor. Integrating InSb nanowires with other materials could potentially unfold novel devices with distinctive functionality. A prominent example is the combination of InSb nanowires with superconductors for the emerging topological particles research. Here, the combination of the II–VI cadmium telluride (CdTe) with the III–V InSb in the form of core–shell (InSb–CdTe) nanowires is investigated and potential applications based on the electronic structure of the InSb–CdTe interface and the epitaxy of CdTe on the InSb nanowires are explored. The electronic structure of the InSb–CdTe interface using density functional theory is determined and a type‐I band alignment is extracted with a small conduction band offset ( ⩽0.3 eV). These results indicate the potential application of these shells for surface passivation or as tunnel barriers in combination with superconductors. In terms of structural quality, it is demonstrated that the lattice‐matched CdTe can be grown epitaxially on the InSb nanowires without interfacial strain or defects. These shells do not introduce disorder to the InSb nanowires as indicated by the comparable field‐effect mobility measured for both uncapped and CdTe‐capped nanowires.

36 MATERIALS SCIENCE↗

Structure, magnetic and electrical properties of CeIrSb and its hydride CeIrSbH{sub 0.8}

The ternary antimonide CeIrSb absorbs hydrogen under moderate temperature and pressure conditions (4 MPa and 573 K), leading to the hydride CeIrSbH{sub 0.8}. The crystal structures of both compounds have been investigated by X-ray diffraction on powders and single crystals: TiNiSi type, space group Pnma, a=735.07(7), b=456.93(4), c=792.8(1) pm, R1/wR2=0.0206/0.0395, 601 F{sup 2} values for CeIrSb and a=728.16(14), b=460.35(6), c=825.87(2) pm, R1/wR2=0.0322/0.0735, 528 F{sup 2} values for CeIrSbH{sub 0.8} with 20 variables per refinement. Hydrogenation induces both an increase of the cell volume V (+4%) and a strongly anisotropic expansion of the unit cell with a maximum of 4.3% in the c direction, leading to a significant increase of the Ce-Ir and Ce-Ce distances in this direction. The H-insertion into CeIrSb leads to a magnetic transition from intermediate valence to antiferromagnetic behavior (T{sub N}=7.0 K) evidenced by magnetization, electrical resistivity and specific heat measurements. This transition can be explained on the basis of the Doniach diagram considering the J{sub cf} interaction between the 4f(Ce) and conduction electrons. - Graphical Abstract: Cerium coordination in CeIrSb and CeIrSbH{sub 0.8}.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Characterization of Cr-rich Cr-Sb multilayer films: Syntheses of a new metastable phase using modulated elemental reactants

The new metastable compound Cr{sub 1+x}Sb with x up to 0.6 has been prepared via a thin film approach using modulated elemental reactants and investigated by in-situ X-ray reflectivity, X-ray diffraction, differential scanning calorimetry, energy dispersive X-ray analysis as well as transmission electron microscopy and atomic force microscopy. The new Cr-rich antimonide crystallizes in a structure related to the Ni{sub 2}In-type structure, where the crystallographic position (1/3, 2/3, 3/4) is partially occupied by excess Cr. The elemental layers of the pristine material interdiffused significantly before Cr{sub 1+x}Sb crystallized. A change in the activation energy was observed for the diffusion process when crystal growth starts. First-principles electronic structure calculations provide insight into the structural stability, magnetic properties and resistivity of Cr{sub 1+x}Sb. - Graphical abstract: 1 amorphous multilayered film 2 interdiffused amorphous film 3 metastable crystalline phase 4 thermodynamic stable phase (and by-product). - Highlights: • Interdiffusion of amorphous Cr and Sb occurs before crystallization. • Crystallization of a new metastable phase Cr{sub 1.6}Sb in Ni{sub 2}In-type structure. • The new Cr-rich phase shows half-metallic behavior.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Synthesis and structural characterization of the Zintl phases Na{sub 3}Ca{sub 3}TrPn{sub 4}, Na{sub 3}Sr{sub 3}TrPn{sub 4}, and Na{sub 3}Eu{sub 3}TrPn{sub 4} (Tr=Al, Ga, In; Pn=P, As, Sb)

15 new quaternary Zintl phases have been synthesized by solid-state reactions from the respective elements, and their structures have been determined by single-crystal X-ray diffraction. Na{sub 3}E{sub 3}TrPn{sub 4} (E=Ca, Sr, Eu; Tr=Al, Ga, In; Pn=P, As, Sb) crystallize in the hexagonal crystal system with the non-centrosymmetric space group P6{sub 3}mc (No. 186). The structure represents a variant of the K{sub 6}HgS{sub 4} structure type (Pearson index hP22) and features [TrPn{sub 4}]{sup 9–} tetrahedral units, surrounded by Na{sup +} and Ca{sup 2+}, Sr{sup 2+}, Eu{sup 2+} cations. The nominal formula rationalization [Na{sup +}]{sub 3}[E{sup 2+}]{sub 3}[TrPn{sub 4}]{sup 9–} follows the octet rule, suggesting closed-shell configurations for all atoms and intrinsic semiconducting behavior. However, structure refinements for several members hint at disorder and mixing of cations that potentially counteract the optimal valence electron count. - Graphical abstract: The hexagonal, non-centrosymmetric structure of Na{sub 3}E{sub 3}TrPn{sub 4} (E=Ca, Sr, Eu; Tr=Al, Ga, In; Pn=P, As, Sb) features [TrPn{sub 4}]{sup 9–} tetrahedral units, surrounded by Na{sup +} and Ca{sup 2+}, Sr{sup 2+}, Eu{sup 2+} cations. - Highlights: • 15 quaternary phosphides, arsenides, and antimonides are synthesized and structurally characterized. • The structure is a variant of the hexagonal K{sub 6}HgS{sub 4}-type, with distinctive pattern for the cations. • Occupational and/or positional disorder of yet unknown origin exists for some members of the series.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗