Engineering Papers⌕ Search
Home/Archive/DOE OSTI

DOE OSTI · 2525850

Persistent Current Simulation for CCT Testing Magnet Used in EIC

Bai, Ye [Brookhaven National Laboratory (BNL), Upton, NY (United States)] (ORCID:0000000240517077)·Witte, Holger [Brookhaven National Laboratory (BNL), Upton, NY (United States)]·Xu, Peng [Brookhaven National Laboratory (BNL), Upton, NY (United States)] (ORCID:0000000331969802)·Kumar, Mithlesh [Brookhaven National Laboratory (BNL), Upton, NY (United States)] (ORCID:000000025360214X)·Notaro, Sara [Brookhaven National Laboratory (BNL), Upton, NY (United States)]
View original source ↗Read source document ↗Export metadata ↓

Abstract

The Electron-Ion Collider (EIC), a powerful new facility to be built in the United States at the U.S. Department of Energy's Brookhaven National Laboratory in collaboration with Thomas Jefferson National Accelerator Facility, will explore the most fundamental building blocks of nearly all visible matter. Here, there are many different types of superconducting magnets near the interaction region (IR) of EIC. Due to space constraints and special lattice requirements, Tapered CCT (canted-cosine theta) magnets have been used for EIC. At beam injection, the magnetic field is only ~5.5% of the maximum operating field. Considerable field errors will be generated from persistent current in superconducting strands even using very fine filament for those superconductors. A tapered CCT demonstrator magnet has been built and tested successfully at BNL since July 2020 to evaluate the key technologies for future tapered CCT magnets. In October 2023, BNL team also measured the persistent current in this demonstrator magnet. To validate the persistent current simulation methods for CCT magnets in EIC, this paper used a full 3D Opera Model and measured magnetization data from superconducting strand for the simulation. Simulation results showed reasonable agreement with recent measurement results.

Explore related subjects

73 NUCLEAR PHYSICS AND RADIATION PHYSICS

Keep this discovery

Explore connections, maps & timelines

BibTeXRIS

Bai, Ye [Brookhaven National Laboratory (BNL), Upton, NY (United States)] (ORCID:0000000240517077), Witte, Holger [Brookhaven National Laboratory (BNL), Upton, NY (United States)], Xu, Peng [Brookhaven National Laboratory (BNL), Upton, NY (United States)] (ORCID:0000000331969802), Kumar, Mithlesh [Brookhaven National Laboratory (BNL), Upton, NY (United States)] (ORCID:000000025360214X), Notaro, Sara [Brookhaven National Laboratory (BNL), Upton, NY (United States)]. 2025-01-14. Persistent Current Simulation for CCT Testing Magnet Used in EIC. https://doi.org/10.1109/tasc.2025.3529420

Cite the original work for its findings. Save a collection to share your selection of sources.

KEEP EXPLORING

Related reports

DOE OSTI2026

Design-informed neutronics assessment of long-lived fission product transmutation in a tokamak fusion reactor blanket

This study presents a neutronics-based assessment of the feasibility and viability of transmuting six major long-lived fission products (LLFPs) from light-water reactors, namely 99 Tc, 129 I, 79 Se, 93 Zr, 126 Sn, and 135 Cs, within the blanket region of a tokamak fusion reactor, using the MIT ARC design as a concrete fusion configuration. Monte Carlo neutronics simulations were performed to evaluate LLFP transmutation and to compare the results with a reference boiling water reactor (BWR). The results indicate that transmutation of all six LLFPs is neutronics-feasible in fusion reactors, with transmutation half-lives significantly shorter than their natural decay half-lives. For elemental targets, transmutation of 135 Cs, 126 Sn, and 93 Zr was found potentially viable, as the net mass transmuted exceeded that achievable in the reference BWR under identical target volume and irradiation time. When isotopically separated targets were considered, transmutation of 126 Sn and 93 Zr appeared potentially viable. A parametric study demonstrated that plasma geometry modifications can enhance local neutron flux, increasing the transmuted 93 Zr mass by approximately 33% and reducing the transmutation half-life from approximately 240 years to 180 years. Repositioning the target and adjusting material layer thickness reduced the transmutation half-life of 93 Zr to 67 years and increased the net mass transmuted by a factor of 50. Furthermore, these results demonstrate that fusion reactors can enable LLFP transmutation beyond the practical limits of thermal fission reactors and highlight the critical role of reactor and blanket design optimization. Engineering and fuel-cycle considerations required for deployment are beyond the scope of this neutronics-focused study.

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗
DOE OSTI2026

A hybrid Monte Carlo-deterministic second moment method with efficient variance reduction

In this work, we present a hybrid method that combines Monte Carlo with deterministic finite element methods to solve a linear Boltzmann transport equation. Our hybrid method runs orders of magnitude faster than Monte Carlo, without sacrificing accuracy, for a proxy problem from radiative transfer that contains both optically-thick and optically-thin material. We believe that this is the first demonstration of a hybrid Second Moment Method in more than one spatial dimension, the first to consider more than one material, and the first to use variance reduction. Our variance reduction approach arises from an asymptotic analysis in which we show that the magnitude of the scattering source grows without bound. We transform the problem to compute the deviation of the radiation intensity from isotropy. The magnitude of the source in the transformed problem is bounded, and the quality of the hybrid method solution is dramatically improved by a substantial reduction in the variance.

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗