Engineering Papers⌕ Search

DOE OSTI · 2448164

HighNESS conceptual design report: Volume I

Abstract

The European Spallation Source, currently under construction in Lund, Sweden, is a multidisciplinary international laboratory. Once completed to full specifications, it will operate the world’s most powerful pulsed neutron source. Supported by a 3 million Euro Research and Innovation Action within the EU Horizon 2020 program, a design study (HighNESS) has been completed to develop a second neutron source located below the spallation target. Compared to the first source, designed for high cold and thermal brightness, the new source has been optimized to deliver higher intensity, and a shift to longer wavelengths in the spectral regions of cold (CN, 2–20 Å), very cold (VCN, 10–120 Å), and ultracold (UCN, >500 Å) neutrons. The second source comprises a large liquid deuterium moderator designed to produce CN and support secondary VCN and UCN sources. Various options have been explored in the proposed designs, aiming for world-leading performance in neutronics. These designs will enable the development of several new instrument concepts and facilitate the implementation of a high-sensitivity neutron-antineutron oscillation experiment (NNBAR). This document serves as the Conceptual Design Report for the HighNESS project, representing its final deliverable.

Explore related subjects

Keep this discovery

Explore connections, maps & timelines

BibTeXRIS

Santoro, Valentina, El Kheir, O. Abou, Acharya, D., Akhyani, M., Andersen, K. H., Barrow, J., Bentley, P., Bernasconi, M., Bertelsen, M., Beßler, Y., Bianchi, A., Brooijmans, G., Broussard, L., Brys, T., Busi, M., Campi, D., Chambon, A., Chen, J., Czamler, V., Deen, P., DiJulio, D. D., Dian, E., Draskovits, L., Dunne, K., El Barbari, M., Ferreira, M. J., Fierlinger, P., Fröst, V. T., Folsom, B. T., Friman-Gayer, U., Gaye, A., Gorini, G., Gustafsson, A., Gutberlet, T., Happe, C., Han, X., Hartl, M., Holl, M., Jackson, A., Kemp, E., Kamyshkov, Y., Kittelmann, T., Klinkby, E. B., Kolevatov, R., Laporte, S. I., Lauritzen, B., Lejon, W., Linander, R., Lindroos, M., Marko, M., Márquez Damián, J. I., McClanahan, T. C., Meirose, B., Mezei, F., Michel, K., Milstead, D., Muhrer, G., Nepomuceno, A., Neshvizhevsky, V., Nilsson, T., Odén, U., Plivelic, T., Ramic, K., Rataj, B., Remec, I., Rizzi, N., Rogers, J., Rosenthal, E., Rosta, L., Rücker, U., Samothrakitis, S., Schreyer, A., Selknaes, J. R., Shuai, H., Silverstein, S., Snow, W. M., Strobl, M., Strothmann, M., Takibayev, A., Wagner, R., Willendrup, P., Xu, S., Yiu, S. C., Yngwe, L., Young, A. R., Wolke, M., Zakalek, P., Zavorka, L., Zanini, L., Zimmer, O.. 2024-05-03. HighNESS conceptual design report: Volume I. https://doi.org/10.3233/jnr-230950

Cite the original work for its findings. Save a collection to share your selection of sources.

KEEP EXPLORING

Related reports

Design-informed neutronics assessment of long-lived fission product transmutation in a tokamak fusion reactor blanket

This study presents a neutronics-based assessment of the feasibility and viability of transmuting six major long-lived fission products (LLFPs) from light-water reactors, namely 99 Tc, 129 I, 79 Se, 93 Zr, 126 Sn, and 135 Cs, within the blanket region of a tokamak fusion reactor, using the MIT ARC design as a concrete fusion configuration. Monte Carlo neutronics simulations were performed to evaluate LLFP transmutation and to compare the results with a reference boiling water reactor (BWR). The results indicate that transmutation of all six LLFPs is neutronics-feasible in fusion reactors, with transmutation half-lives significantly shorter than their natural decay half-lives. For elemental targets, transmutation of 135 Cs, 126 Sn, and 93 Zr was found potentially viable, as the net mass transmuted exceeded that achievable in the reference BWR under identical target volume and irradiation time. When isotopically separated targets were considered, transmutation of 126 Sn and 93 Zr appeared potentially viable. A parametric study demonstrated that plasma geometry modifications can enhance local neutron flux, increasing the transmuted 93 Zr mass by approximately 33% and reducing the transmutation half-life from approximately 240 years to 180 years. Repositioning the target and adjusting material layer thickness reduced the transmutation half-life of 93 Zr to 67 years and increased the net mass transmuted by a factor of 50. Furthermore, these results demonstrate that fusion reactors can enable LLFP transmutation beyond the practical limits of thermal fission reactors and highlight the critical role of reactor and blanket design optimization. Engineering and fuel-cycle considerations required for deployment are beyond the scope of this neutronics-focused study.

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗

A hybrid Monte Carlo-deterministic second moment method with efficient variance reduction

In this work, we present a hybrid method that combines Monte Carlo with deterministic finite element methods to solve a linear Boltzmann transport equation. Our hybrid method runs orders of magnitude faster than Monte Carlo, without sacrificing accuracy, for a proxy problem from radiative transfer that contains both optically-thick and optically-thin material. We believe that this is the first demonstration of a hybrid Second Moment Method in more than one spatial dimension, the first to consider more than one material, and the first to use variance reduction. Our variance reduction approach arises from an asymptotic analysis in which we show that the magnitude of the scattering source grows without bound. We transform the problem to compute the deviation of the radiation intensity from isotropy. The magnitude of the source in the transformed problem is bounded, and the quality of the hybrid method solution is dramatically improved by a substantial reduction in the variance.

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗