Engineering Papers⌕ Search

Engineering topics

Zhou, Yan

Publications and source records attributed to Zhou, Yan.

At least 109 records · Page 6

Incentivizing Adoption of Plug-in Electric Vehicles: A Review of Global Policies and Markets

This report summarizes current government policies that seek to increase deployment of light-duty, plug-in electric vehicles (PEVs) in the United States, Europe, and China. The paper also describes recent PEV market trends in these three regions. By comparing combinations of PEV policies and trends of PEV sales in different regions at national and subnational levels, the authors make several observations and draw general conclusions, using supporting examples for the findings. One finding, consistent with earlier studies, is that multiple, complementary PEV incentives and deployment policies are generally more effective in increasing adoption of PEVs within a given market than single policie s. In most regions, financial incentives, especially point -of -sale incentives, are effective in increasing adoption, particularly when generous and combined with other supporting polices, such as increasing charging station availability, which contributes to ease of use. The authors also observed differences in policies and market trends between regions. In Europe, where taxes on vehicles are high, tax credits provide strong incentives for PEV adoption, whereas in several Chinese cities, where restrictions on vehicle registration or use are imposed, relaxation of restrictions on PEVs effectively promote PEV adoption. In addition, governments are replacing some policies based on technical specifications (e.g., battery capacity) with policies based on performance metrics (e.g., vehicle range and electricity consumption rate per distance).

33 ADVANCED PROPULSION SYSTEMS↗

Assessment of Expanding Natural Gas Use in Transportation

This report summarizes an analysis of the impacts of a successful expansion of natural gas use by the transportation sector. While natural gas has been successfully introduced into a few niche markets, it currently makes up a small fraction of transportation energy use. The barriers to expansion include several technical issues currently limiting the natural gas vehicle market . If research and development is successful in addressing these technical challenges, there could be a significant shift to natural gas vehicles. With the increased production of cheap natural gas, the Energy Information Administration within the U.S. Department of Energy projects a surplus production of 5.56 trillion cubic feet of natural gas to be exported in 2050. The analysis presented in this report shows that up to 3.40 trillion cubic feet of this surplus could be used by a set of selected transportation modes.

03 NATURAL GAS↗

Bayesian Static Parameter Estimation for Partially Observed Diffusions via Multilevel Monte Carlo

In this article we consider static Bayesian parameter estimation for partially observed diffusions that are discretely observed. We work under the assumption that one must resort to discretizing the underlying diffusion process, for instance, using the Euler--Maruyama method. Given this assumption, we show how one can use Markov chain Monte Carlo (MCMC) and particularly particle MCMC [C. Andrieu, A. Doucet, and R. Holenstein, J. R. Stat. Soc. Ser. B Stat. Methodol., 72 (2010), 269--342] to implement a new approximation of the multilevel (ML) Monte Carlo (MC) collapsing sum identity. Our approach comprises constructing an approximate coupling of the posterior density of the joint distribution over parameter and hidden variables at two different discretization levels and then correcting by an importance sampling method. The variance of the weights are independent of the length of the observed data set. The utility of such a method is that, for a prescribed level of mean square error, the cost of this MLMC method is provably less than i.i.d. sampling from the posterior associated to the most precise discretization. However the method here comprises using only known and efficient simulation methodologies. Finally, the theoretical results are illustrated by inference of the parameters of two prototypical processes given noisy partial observations of the process: the first is an Ornstein--Uhlenbeck process and the second is a more general Langevin equation.

97 MATHEMATICS AND COMPUTING↗

Analysis of Compounds Dissolved in Nonpolar Solvents by Electrospray Ionization on Conductive Nanomaterials

Electrospray ionization mass spectrometry (ESI-MS) technique has limitations in analysis of compounds that are dissolved in nonpolar solvents. In this study, ambient ionization of compounds in solvents that are not “friendly” to electrospray ionization, such as n-hexane, is achieved by conductive nanomaterials spray ionization (CNMSI) on nanomaterial emitters, including carbon nanotubes paper and mesodendritic silver covered metal, which applies high voltages to emitters made of these materials without the assistance of polar solvents. Although the time intensity curves (TIC) commonly vary from 4.5% to 23.7% over analyses, protonated molecular ions were found to be the most abundant species, demonstrating good reproducibility of the technique in terms of ionized species. Higher mass spectrometric responses are observed in analyzing nonpolar systems than polar systems. 2-Methoxyacetophenone, 4-methylacetophenone, benzothiazole, quinolone, and cycloheptanone as low as 2 pg in n-hexane can be directly detected using the developed method. The developed technique expands the analysis capability of ESI-MS for direct, online analysis of nonpolar systems, such as low polarity extracts, normal phase liquid chromatography eluates, and synthetic mixtures. .

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Facile Preparation of Light Emitting Organic Metal Halide Crystals with Near-Unity Quantum Efficiency

Here, we report the synthesis and characterization of (Ph 4 P) 2 SbCl 5 , a novel ionically bonded organic metal halide hybrid with a zero-dimensional (0D) structure at the molecular level. By cocrystallization of tetraphenylphosphonium (Ph 4 P + ) and antimony (Sb 3+ ) chloride salts, (Ph 4 P) 2 SbCl 5 bulk single crystals can be prepared in high yield, which exhibit a highly efficient broadband red emission peaked at 648 nm with a photoluminescence quantum efficiency (PLQE) of around 87%. Density functional theory (DFT) calculations reveal the origin of emission as phosphorescence from the excitons localized at SbCl 5 2– with strong excited-state structural distortion. Interestingly, (Ph 4 P) 2 SbCl 5 bulk crystals with a PLQE of around 100% can be prepared via a rapid crystal growth process within minutes, followed by a spontaneous structural transformation. It was found that the rapid growth process yielded a yellow emitting kinetically favored metastable product containing solvent molecules, which turned into the red emitting thermodynamically stable product slowly at room temperature or quickly upon thermal treatment.

36 MATERIALS SCIENCE↗

Non-Light-Duty Energy and Greenhouse Gas Emissions Accounting Tool (NEAT): Documentation and User Guide for Updated Domestic Freight Component

The Non-Light-Duty Energy and Greenhouse Gas Emissions Accounting Tool (NEAT) was developed to help evaluate various scenarios of non-light-duty transportation demand, mode choice, energy intensity changes, and alternative fuel use. The model was initiated as a part of the Transportation Energy Futures Study conducted jointly by the National Renewable Energy Laboratory and Argonne National Laboratory.

33 ADVANCED PROPULSION SYSTEMS↗

Epigallocatechin-3-gallate attenuates acute and chronic psoriatic itch in mice: Involvement of antioxidant, anti-inflammatory effects and suppression of ERK and Akt signaling pathways

Chronic itch is a distressing symptom of many skin diseases and negatively impacts quality of life. However, there is no medication for most forms of chronic itch, although antihistamines are often used for anti-itch treatment. Epigallocatechin-3-gallate (EGCG), a major green tea polyphenol, exhibits anti-oxidative and anti-inflammatory properties. Our previous studies highlighted a key role of oxidative stress and proinflammatory cytokines in acute and chronic itch. Here, we evaluated the effects of green tea polyphenon 60 and EGCG on acute and chronic itch in mouse models and explored its potential mechanisms. The effects of EGCG were determined by behavioral tests in mouse models of acute and chronic itch, which were induced by compound 48/80, chloroquine (CQ), and 5% imiquimod cream treatment, respectively. We found that systemic or local administration of green tea polyphenon 60 or EGCG significantly alleviated compound 48/80- and chloroquine-induced acute itch in a dose-dependent manner in mice. Incubation of EGCG significantly decreased the accumulation of intracellular reactive oxygen species (ROS) directly induced by compound 48/80 and CQ in cultured ND7-23 cells, a dorsal root ganglia derived cell line. EGCG also attenuated imiquimod-induced chronic psoriatic itch behaviors and skin epidermal hyperplasia in mice. In addition, EGCG inhibited the expression of IL-23 mRNA in skin and TRPV1 mRNA in dorsal root ganglia (DRG). Finally, EGCG remarkably inhibited compound 48/80-induced phosphorylation of extracellular signal-regulated kinase (ERK) and imiquimod-induced p-AKT in the spinal cord of mice, respectively. Collectively, these results indicated EGCG could be a promising strategy for anti-itch therapy.

60 APPLIED LIFE SCIENCES↗

A rolling-sliding bench test for investigating rear axle lubrication

An automotive rear axle is composed of a set of hypoid gears, whose contact surfaces experience a complex combination of rolling contact fatigue damage and sliding wear. Full-scale rear axle dynamometer tests are used in the industry for efficiency and durability assessment. Here, this study developed a bench-scale rolling-sliding test protocol by simulating the contact pressure, oil temperature, and lubrication regime experienced in a dynamometer duty cycle test. Initial bench results have demonstrated the ability of generating both rolling contact-induced micropitting and sliding wear and the feasibility of investigating the impact of slide-to-roll ratio, surface roughness, test duration, and oil temperature on the friction behavior, vibration noise, and surface damage. Finally, this bench test will allow studying candidate rear axle lubricants and materials under relevant conditions.

42 ENGINEERING↗

Impacts of Electrification of Light-Duty Vehicles in the United States, 2010 - 2017

This report examines the sales of plug-in electric vehicles (PEVs) in the United States from 2010 to 2017, exploring vehicle sales, electricity consumption, petroleum reduction, and battery production, among other factors. Over 750,000 PEVs have been sold, driving nearly 16 billion miles on electricity, thereby reducing gasoline consumption by 0.1% in 2016 and 600 million gallons cumulatively through 2017, while using over 5 terawatt-hours of electricity. Over 23 gigawatt-hours of battery capacity has been placed in vehicles, and 98% of this is still on the road, assuming typical scrappage rates.

32 ENERGY CONSERVATION, CONSUMPTION, AND UTILIZATI↗

Surfactant protein D attenuates nitric oxide-stimulated apoptosis in rat chondrocyte by suppressing p38 MAPK signaling

Innate immune molecule surfactant protein D (SP-D), a member of the C-type lectin protein family, plays an indispensable role in host defense and the regulation of inflammation in the lung and other tissues. Osteoarthritis (OA) is a degenerative disease of cartilage, with inflammation that causes pathologic changes and tissue damage. However, it is unknown whether there exist SP-D expression and its potential role in the pathogenesis of OA. In this study, we examined SP-D expression and explored its biological function in a sodium nitroprusside (SNP)-stimulated rat chondrocytes and surgically-induced rat OA model. We found SP-D expression in both human and rat articular chondrocytes, with higher level in normal chondrocytes compared to in OA chondrocytes. Furthermore, In vivo study demonstrated that recombinant human SP-D (rhSP-D) ameliorated cartilage degeneration in surgically-induced rat OA model. In vitro cell culture study showed that rhSP-D markedly inhibited the expression of caspase-3 as an apoptosis biomarker, and decreased phosphorylation of p38 mitogen-activated protein kinase (MAPK), which resulted in maintaining normal nuclear morphology and increasing mitochondrial membrane potential in SNP-stimulated rat chondrocytes. Collectively, these findings indicate that SP-D expresses in articular chondrocytes and suppresses SNP-stimulated chondrocyte apoptosis and ameliorates cartilage degeneration via suppressing p38 MAPK activity.

60 APPLIED LIFE SCIENCES↗

Coated substrate apparatus and method

A coated substrate is formed with aligned objects such as small molecules, macromolecules and nanoscale particulates, such as inorganic, organic or inorganic/organic hybrid materials. In accordance with one or more embodiments, an apparatus or method involves an applicator having at least one surface patterned with protruded or indented features, and a coated substrate including a solution-based layer of objects having features and morphology attributes arranged as a function of the protruded or indented features.

36 MATERIALS SCIENCE↗

A Zero-Dimensional Organic Seesaw-Shaped Tin Bromide with Highly Efficient Strongly Stokes-Shifted Deep-Red Emission

The synthesis and characterization is reported of (C 9 NH 20 ) 2 SnBr 4 , a novel organic metal halide hybrid with a zero-dimensional (0D) structure, in which individual seesaw-shaped tin (II) bromide anions (SnBr 4 2- ) are co-crystallized with 1-butyl-1-methylpyrrolidinium cations (C 9 NH 20 + ). Upon photoexcitation, the bulk crystals exhibit a highly efficient broadband deep-red emission peaked at 695 nm, with a large Stokes shift of 332 nm and a high quantum efficiency of around 46 %. Furthermore, the unique photophysical properties of this hybrid material are attributed to two major factors: 1) the 0D structure allowing the bulk crystals to exhibit the intrinsic properties of individual SnBr 4 2- species, and 2) the seesaw structure then enables a pronounced excited state structural deformation as confirmed by density functional theory (DFT) calculations.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Multilevel Particle Filters

In this paper the filtering of partially observed diffusions, with discrete-time observations, is considered. It is assumed that only biased approximations of the diffusion can be obtained for choice of an accuracy parameter indexed by l. A multilevel estimator is proposed consisting of a telescopic sum of increment estimators associated to the successive levels. Additionally, the work associated to $\mathcal{O}(\varepsilon^2)$ mean-squared error between the multilevel estimator and average with respect to the filtering distribution is shown to scale optimally, for example, as $\mathcal{O}(\varepsilon^{-2})$ for optimal rates of convergence of the underlying diffusion approximation. The method is illustrated with some toy examples as well as estimation of interest rate based on real S&P 500 stock price data.

97 MATHEMATICS AND COMPUTING↗

Bulk assembly of organic metal halide nanotubes

The organic metal halide hybrids welcome a new member with a one-dimensional (1D) tubular structure. Herein we report the synthesis and characterization of a single crystalline bulk assembly of organic metal halide nanotubes, (C 6 H 13 N 4 ) 3 Pb 2 Br 7 . In a metal halide nanotube, six face-sharing metal halide dimers (Pb 2 Br 9 5– ) connect at the corners to form rings that extend in one dimension, of which the inside and outside surfaces are coated with protonated hexamethylenetetramine (HMTA) cations (C 6 H 13 N 4 + ). This unique 1D tubular structure possesses highly localized electronic states with strong quantum confinement, resulting in the formation of self-trapped excitons that give strongly Stokes shifted broadband yellowish-white emission with a photoluminescence quantum efficiency (PLQE) of ~7%. Finally, having realized single crystalline bulk assemblies of two-dimensional (2D) wells, 1D wires, and now 1D tubes using organic metal halide hybrids, our work significantly advances the research on bulk assemblies of quantum-confined materials.

36 MATERIALS SCIENCE↗

Understanding the Impact of Oligomeric Polystyrene Side Chain Arrangement on the All‐Polymer Solar Cell Performance

Abstract The introduction of oligomeric polystyrene (PS) side chains into the conjugated backbone is proven to enhance the processability and electronic properties of semiconducting polymers. Here, two series of donor and acceptor polymers are prepared with different molar percentages of PS side chains to elucidate the effect of their substitution arrangement on the all‐polymer solar cell performance. The observed device performance is lower when the PS side chains are substituted on the donor polymer and higher when on the acceptor polymer, indicating a clear arrangement effect of the PS side chain. The incorporation of PS side chains to the acceptor polymer contributes to the decrease in phase separation domain size in the blend films. However, the reduced domain size was still an order of magnitude larger than the typical exciton diffusion length. A detailed morphological study together with the estimation of solubility parameter of the pristine PS, donor, and acceptor polymers reveals that the relative value of solubility parameter of each component dominantly contributes to the purity of the phase separated domain, which strongly impacts the amount of generated photocurrent and overall solar cell performance. This study provides an understanding of the design strategies to improve the all‐polymer solar cells.

Kurosawa, Tadanori↗

Multilevel Sequential Monte Carlo Samplers for Normalizing Constants

This article considers the sequential Monte Carlo (SMC) approximation of ratios of normalizing constants associated to posterior distributions which in principle rely on continuum models. Therefore, the Monte Carlo estimation error and the discrete approximation error must be balanced. A multilevel strategy is utilized to substantially reduce the cost to obtain a given error level in the approximation as compared to standard estimators. Two estimators are considered and relative variance bounds are given. The theoretical results are numerically illustrated for two Bayesian inverse problems arising from elliptic partial differential equations (PDEs). The examples involve the inversion of observations of the solution of (i) a 1-dimensional Poisson equation to infer the diffusion coefficient, and (ii) a 2-dimensional Poisson equation to infer the external forcing.

97 MATHEMATICS AND COMPUTING↗

Understanding Tribofilm Formation Mechanisms in Ionic Liquid Lubrication

Ionic liquids (ILs) have recently been developed as a novel class of lubricant anti-wear (AW) additives, but the formation mechanism of their wear protective tribofilms is not yet well understood. Unlike the conventional metal-containing AW additives that self-react to grow a tribofilm, the metal-free ILs require a supplier of metal cations in the tribofilm growth. The two apparent sources of metal cations are the contact surface and the wear debris, and the latter contains important ‘historical’ interface information but often is overlooked. We correlated the morphological and compositional characteristics of tribofilms and wear debris from an IL-lubricated steel–steel contact. In conclusion, a complete multi-step formation mechanism is proposed for the tribofilm of metal-free AW additives, including direct tribochemical reactions between the metallic contact surface with oxygen to form an oxide interlayer, wear debris generation and breakdown, tribofilm growth via mechanical deposition, chemical deposition, and oxygen diffusion.

36 MATERIALS SCIENCE↗