Engineering Papers⌕ Search

Engineering topics

Zhou, Yan

Publications and source records attributed to Zhou, Yan.

At least 91 records · Page 5

Is more always better? Tribofilm evolution and tribological behavior impacted by the concentration of ZDDP, ionic liquid, and ZDDP-Ionic liquid combination

Anti-wear additives (AWs), like zinc dialkyldithiophosphates (ZDDPs), have been used in lubricants for more than a half-century, and more effective candidate AWs, like oil-soluble ionic liquids (ILs), are emerging. However, there is a lack of fundamental understanding of how the AW concentration impacts the tribochemical activities at the contact interface. This study systematically investigated the friction and wear behavior in correlation to the tribofilm morphology and composition as a function of the concentration of a ZDDP, a phosphonium-alkylphosphate IL, and an IL+ZDDP combination. The ZDDP concentration rising from 0.4 to 6.4 wt% caused a proportionally increased friction coefficient, which was well correlated to a thicker, rougher, and more brittle tribofilm. This was further understood by the decreasing phosphates but increasing sulfur compounds in the ZDDP tribofilm. In contrast, the IL and IL+ZDDP maintained a low and stable friction coefficient at 0.5 wt% or above. There was no sulfur in the IL tribofilm, and the sulfur compounds were maintained at a low level in the tribofilm for IL+ZDDP even at high concentrations. Results suggested minimizing the sulfur content in the tribofilm would be an effective way to control the friction. An interesting V-shape relationship between the AW concentration and the wear loss was observed for both the IL-containing AWs, with an optimum at 2 wt% for the IL alone and 0.46–0.92 wt% for the IL+ZDDP, respectively. A unique heat map was created using the phosphorus binding energy distribution to reveal the phosphate polymerization at different depths of the tribofilms, which provided additional insight for the tribofilm evolution.

36 MATERIALS SCIENCE↗

Wireless charging and shared autonomous battery electric vehicles (W+SABEV): synergies that accelerate sustainable mobility and greenhouse gas emission reduction

Emerging technologies play important roles in shaping future mobility systems and impacting sustainability performance of the transportation sector in major economies, such as the United States of America (USA) and China. This study applies a life cycle framework to demonstrate and evaluate the synergies of the following four emerging transportation system technologies both qualitatively and quantitatively: (1) wireless charging; (2) shared mobility services; (3) autonomous driving; and (4) battery electric vehicles (BEV). The new concept of a wireless charging and shared autonomous battery electric vehicle (W+SABEV) system is introduced and modeled. First, an analytical framework is presented to assess the pros and cons of the W+SABEV system vs. a conventional plug-in charging BEV system, adhering to the principles of sustainable mobility and highlighting the impacts and dynamics of the disruptive technologies on the key parameters that define sustainable mobility. Second, a quantitative analysis presents the synergies of the four technologies by modeling a W+SABEV system and demonstrates that the combination of the four technologies can shorten the payback time of greenhouse gas (GHG) emission burdens for infrastructure and vehicles. Finally, compared to a plug-in charging BEV system, a W+SABEV system pays back the additional GHG emission burdens of wireless charging infrastructure deployment within 5 years if the wireless charging utility factor (ratio of en route charging time vs. trip time) is above 19%.

33 ADVANCED PROPULSION SYSTEMS↗

National Energy Impacts of Heavy Electric Truck Adoption For Freight

Freight trucks are projected to account for nearly 30% of transportation sector energy use in 2050 in the United States. Potentially some of the freight energy use and associated emissions can be reduced by electrified vehicle technologies, smart technologies (e.g. platooning, driverless truck), and possible mode shifts. Several U.S. truck makers, new startups, and independent engine manufacturers made announcements of taking commericialized medium- and heavy-duty trucks into production for these emerging technologies. By analyzing the freight shipment by commodity and freight zones, the study objectives are 1) idenfiy long-haul freight miles that could be electrified without on-route charging infrastructure; and 2) quantify future energy consumption impacts. This paper utilized Argonne’s NEAT and VISION models to estimate the potential energy impacts of electric truck adoption by 2050 in the United States. Analysis results shows that either a Class 7 and 8 electric truck with 500-mile electric range could potentially reduce the petroleum consumption by 1.61 quad in 2050, while the electricity consumption increases by 0.99 quad.

Electric heavy duty truck, freight↗

Structure and tailspike glycosidase machinery of ORF212 from E. coli O157:H7 phage CBA120 (TSP3)

Bacteriophage tailspike proteins mediate virion absorption through reversible primary receptor binding, followed by lipopolysaccharide or exopolysaccharide degradation. The Escherichia coli O157:H7 bacteriophage CBA120 genome encodes four distinct tailspike proteins, annotated as ORFs 210 through 213. Previously, we reported the crystal structure of ORF210 (TSP1). Here we describe the crystal structure of ORF212 (TSP3) determined at 1.85 Å resolution. As observed with other tailspike proteins, TSP3 assembles into a trimer. Each subunit of TSP3 has an N-terminal head domain that is structurally similar to that of TSP1, consistent with their high amino acid sequence identity. In contrast, despite sharing a β-helix fold, the overall structure of the C-terminal catalytic domain of TSP3 is quite different when compared to TSP1. The TSP3 structure suggests that the glycosidase active site resides in a cleft at the interface between two adjacent subunits where three acidic residues, Glu362 and Asp383 on one subunit, and Asp426 on a second subunit, are located in close proximity. Comparing the glycosidase activity of wild-type TSP3 to various point mutants revealed that catalysis requires the carboxyl groups of Glu362 and Asp426, and not of Asp383, confirming the enzyme employs two carboxyl groups to degrade lippopolysaccharide using an acid/base mechanism.

59 BASIC BIOLOGICAL SCIENCES↗

FY2018 Analysis Annual Progress Report

During fiscal year 2018 (FY 2018), the U.S. Department of Energy Vehicle Technologies Office (VTO) funded analysis projects supportive of VTO’s goals to pursue early stage research in vehicle and mobility system technologies to improve energy efficiency, increase energy reliability and security, improve transportation affordability, and promote economic growth. VTO analysis projects result in a foundation of data, analytical models, and applied analyses that provide insights into critical transportation energy problems and assist in research investment prioritization and portfolio planning.

33 ADVANCED PROPULSION SYSTEMS↗

PET/CT in brachytherapy early response evaluation of pancreatic ductal adenocarcinoma xenografts: comparison with apparent diffusion coefficient from diffusion-weighted MR imaging

Objective: To evaluate the feasibility of using PET/CT and diffusion-weighted magnetic resonance imaging (DW-MRI) to monitor the early response of pancreatic ductal adenocarcinoma (PDAC) xenografts to brachytherapy, and to determine whether maximum standardized uptake value (SUVmax) correlate with apparent diffusion coefficient (ADC). Materials and Methods: SW1990 human PDAC were subcutaneously implanted in 20 nude mice. They were randomly divided into 125-Iodine ({sup 125}I) seeds and blank seeds group. PET/CT and DW-MRI were performed at pretreatment and 5 days after therapy. SUVmax and ADC values were calculated, respectively. The correlation between SUVmax and ADC values was analyzed by the Pearson correlation test. Results: The SUVmax were significantly decreased between pretreatment and 5 days after {sup 125}I seeds treatment (p < 0.001) and between two groups (p < 0.001). And the ADC values were significantly increased between pretreatment and 5 days after {sup 125}I seeds treatment (p < 0.001) and between two groups (p < 0.001). While in the bank seeds group, there were no significantly difference between pretreatment and after treatment in SUVmax and ADC values (p = 0.057; p = 0.397). SUVmax and ADC correlated significantly and negatively before treatment in both groups (r = − 0.964, R{sup 2} = 0.929, p < 0.001; r = − 0.917, R{sup 2} = 0.841, p < 0.001) and after treatment in the blank seeds group (r = − 0.944, R{sup 2} = 0.891, p < 0.001). But after {sup 125}I seeds treatment there was no significant correlation between SUVmax and ADC (r = − 0.388, R{sup 2} = 0.151, p = 0.268). Conclusion: The PET/CT and DW-MRI are capable of monitoring the early response of PDAC xenografts to brachytherapy. The significantly inverse correlation between pretreatment SUVmax and ADC suggests that PET/CT and DW-MRI might play complementary roles for therapy assessment.

62 RADIOLOGY AND NUCLEAR MEDICINE↗

Assessment of Light-Duty Plug-In Electric Vehicles in the United States, 2010–2018

This report examines properties of plug-in electric vehicles (PEVs) sold in the United States from 2010 to 2018, exploring vehicle sales, miles driven, electricity consumption, petroleum reduction, vehicle manufacturing, and battery production, among other factors. Over one million PEVs have been sold, driving over 25 billion miles on electricity since 2010, thereby reducing national gasoline consumption by 0.23% in 2018 and 950 million gallons cumulatively through 2018. In 2018, PEVs used 2.8 terawatt-hours of electricity to drive 8.6 billion miles, offsetting 320 million gallons of gasoline. The majority of these vehicles were assembled in the United States, and over 42 gigawatt-hours of lithium-ion batteries have been installed in vehicles.

33 ADVANCED PROPULSION SYSTEMS↗

Molecular and Electronic Structure, and Hydrolytic Reactivity of a Samarium(II) Crown Ether Complex

The reaction of SmI 2 with dibenzo-30-crown-10 (DB30C10), followed by metathesis with [Bu 4 N][BPh 4 ], allows for the isolation of [Sm II (DB30C10)][BPh 4 ] 2 as bright-red crystals in good yield. Moreover, exposure of [Sm(DB30C10)] 2+ to solvents containing trace water results in the conversion to the dinuclear Sm III complex, Sm 2 (DB30C10)(OH) 2 I 4 . Structural analysis of both complexes shows substantial rearrangement of the crown ether from a folded, Pac-Man form with Sm II to a twisted conformation with Sm III . The optical properties of [Sm II (DB30C10)][BPh 4 ] 2 exhibit a strong temperature dependence and change from broad-band absorption features indicative of domination by 5d states to fine features characteristic of 4f → 4f transitions at low temperatures. Here, exploration of the electronic structure of these complexes via ab initio wave function calculations (SO-CASSCF) reflects that the ground state of Sm II in [Sm II (DB30C10)] 2+ is a 4f 6 state with low-lying 4f 5 5d 1 states, where the latter states have been lowered in energy by ~12 000 cm –1 with respect to the free ion. The decacoordination of the Sm II cation by the crown ether is responsible for this alteration in the energies of the excited state and demonstrates the ability to tune the electronic structure of Sm II .

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Bulk Assembly of Corrugated 1D Metal Halides with Broadband Yellow Emission

Here, the family of molecular level low–dimensional organic metal halide hybrids has expanded significantly over the last few years. Here a new type of 1D metal halide structure is reported, in which metal halide octahedra form a corrugated double–chain structure via nonplanar edge–sharing. This material with a chemical formula of C 5 H 16 N 2 Pb 2 Br 6 exhibits a broadband yellow emission under ultraviolet light excitation with a photoluminescence quantum efficiency of around 10%. The light–yellow emission is considered to be attributed to self–trapping excitons. Theoretical calculations show that the unique alignment of the octahedra leads to small band dispersion and large exciton binding energy. Together with previously reported 1D metal halide wires and tubes, this new bulk assembly of 1D metal halides suggests the potential to develop a library of bulk assemblies of metal halides with controlled structures and compositions.

1D structures↗

Will Advanced Public Charging Infrastructure Speed Up Electrification of Future Transportation?

This study focuses on evaluating impacts of advanced, urban public charging infrastructure on the battery electric vehicle (BEV) adoption in the U.S market. Under various infrastructure scenarios (e.g., current and developed conditions), we investigate the infrastructure impacts on the near-term BEV adoption using a consumer-choice based market simulation approach. Our results suggest that current public charging infrastructure has continuous and significant impacts on the near-term BEV adoption. Additional infrastructure investment could further stimulate the public acceptance of BEVs. We also find that the actual infrastructure impact may vary depending on the assumption of how charging deployment could affect consumers' access of chargers and consumers' daily available charging time. However, this impact variability could be reduced when infrastructure is getting mature.

33 ADVANCED PROPULSION SYSTEMS↗

Residual value analysis of plug-in vehicles in the United States

Knowledge about the value of used plug-in electric vehicles (PEVs), known as residual value, is critical for potential PEV purchasers, corporations, and governments who wish to consider the lifetime cost effectiveness of PEVs. In this study, we investigate the residual values of PEVs and compare them with those of other vehicle powertrain technologies using the “true market value” data from Edmunds.com, and considering U.S. federal incentives. We define the adjusted retention rate as the ratio between resale value and the manufacturer’s suggested retail price, subtracting incentives. We develop statistical models to quantify the effects of powertrain technologies on residual value while controlling key factors, including vehicle size, brand, and market segments. We find that the long-range high-performance Tesla Model S holds value significantly better than any other vehicle type evaluated, including internal combustion engine vehicles. Hybrid electric vehicles and plugin hybrid electric vehicles are comparable to one another. They hold slightly less value than internal combustion engine vehicles, but significantly more than short-range (<125 miles) battery electric vehicles. However, short-range battery electric vehicles have a faster improvement in 3-year adjusted retention rate than any other powertrain technology from model year 2013–2014. Finally, the other factor that significantly influences adjusted retention rate is the home country of the vehicle manufacturer (e.g., United States, Japan, or Germany).

32 ENERGY CONSERVATION, CONSUMPTION, AND UTILIZATI↗

China Vehicle Fleet Model: Estimation of Vehicle Stocks, Usage, Emissions, and Energy Use - Model Description, Technical Documentation, and User Guide

With fast economic growth, urbanization, and industrialization, China has experienced rapid expansion in the on-road transportation sector in the past three decades. The highway vehicle population in China increased from 1.65 million in 1980 to 208 million in 2017 with an annual average growth rate (AAGR) of about 14% .

33 ADVANCED PROPULSION SYSTEMS↗

Examination of Structure and Bonding in 10-Coordinate Europium and Americium Terpyridyl Complexes

M(TpyNO 2 )(NO 3 ) 3 (H 2 O)·THF (M = La, Ce, Nd, Sm, Eu, Am; TpyNO 2 = 4’-nitrophenyl terpyridyl) have been prepared from the reaction of M(NO 3 ) 3 ·nH 2 O with TpyNO 2 in THF. Structural analysis shows that the metal centers are ten-coordinate, providing the first example of Am III with this coordination number. Further spectroscopic and theoretical evaluation of these complexes reveals utilization of the 5f orbitals in bonding in the Am III complex. Comparison of Nd‒L, Eu‒L, and Am‒L bond distances demonstrates that some caution should be taken in comparing Eu III versus Am III in extraction experiments.

anions↗

Impact of Fuel Contents on Tribological Performance of PAO Base Oil and ZDDP

Fuel and water contents are inevitable in automotive engine oils. This study intends to investigate the impact of the addition of gasoline (3–20%) and water (1%) on the lubricating performance of synthetic base oil (PAO), with or without an anti-wear additive (ZDDP), for a steel-cast iron contact. Fuel-added PAO showed an increase in the load carrying capacity. Oil electrical conductivity and total acid number (TAN) measurements showed slightly increased conductivity and marginally increased acidity at a higher fuel concentration. In contrast, an increased wear rate, proportional to the fuel concentration, was observed in a prolonged test with constant-loading. Results suggested that the fuel addition is a double-edged sword: reducing the scuffing risk by providing stronger surface adsorption and increasing the sliding wear rate by bringing down the oil viscosity. The PAO-water blend formed an emulsion and resulted in a significantly increased load-carrying capacity, again likely due to the higher polarity and possibly acidity. For the ZDDP-containing PAO, the addition of 1% water and 3% fuel generated 24% and 52% higher wear. The phosphate polymerization level was reduced on the worn surfaces by the introduction of water but the thickness of ZDDP tribofilm was not significantly affected.

36 MATERIALS SCIENCE↗

Wavelength selective separation of metal ions using electroactive ligands

The separation of metal ions can be challenging because of similarities in charge density, size, and binding affinities. Here, we introduce a new photochemical separation strategy that relies on the intrinsically unique photophysical properties of metal ion complexes and the selective transformation of an electroactive ligand.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗