Engineering Papers⌕ Search

Engineering topics

Zhou, Y.

Publications and source records attributed to Zhou, Y..

At least 73 records · Page 4

Tungsten disulphide based all fiber Q-switching cylindrical-vector beam generation

We proposed and demonstrated an all fiber passively Q-switching laser to generate cylindrical-vector beam, a two dimensional material, tungsten disulphide (WS{sub 2}), was adopted as a saturable absorber inside the laser cavity, while a few-mode fiber Bragg grating was used as a transverse mode-selective output coupler. The repetition rate of the Q-switching output pulses can be varied from 80 kHz to 120 kHz with a shortest duration of 958 ns. Attributed to the high damage threshold and polarization insensitivity of the WS{sub 2} based saturable absorber, the radially polarized beam and azimuthally polarized beam can be easily generated in the Q-switching fiber laser.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Two-Dimensional Nb-Based M 4 C 3 Solid Solutions (MXenes)

Two new two-dimensional Nb 4 C 3 -based solid solutions (MXenes), (Nb 0.8 ,Ti 0.2 ) 4 C 3 T x and (Nb 0.8 ,Zr 0.2 ) 4 C 3 T x (where T is a surface termination) were synthesizedas confirmed by X-ray diffractionfrom their corresponding MAX phase precursors (Nb 0.8 ,Ti 0.2 ) 4 AlC 3 and (Nb 0.8 ,Zr 0.2 ) 4 AlC 3 . In our report we discuss Zr-containing MXene. We also studied intercalation of Li ions into these two compositions, and Nb 4 C 3 T x in order to determine the potential of those materials for energy storage applications. Lithiation and delithiation peaks at 2.26 and 2.35 V, respectively, appeared in the case of Nb 4 C 3 T x , but were not present in Nb 2 CT x . After 20 cycles at a rate of C/4, the specific capacities of (Nb 0.8 ,Ti 0.2 ) 4 C 3 T x and (Nb 0.8 ,Ti 0.2 ) 4 C 3 T x were 158 and 132 mAh/g, respectively, both slightly lower than the capacity of Nb 4 C 3 T x .

36 MATERIALS SCIENCE↗

White-light-induced disruption of nanoscale conducting filament in hafnia

Nanoscale conducting filament, which forms the basis of the HfO{sub 2} resistive memory, is shown to exhibit a “negative photoconductivity” behavior, in that, electrical conduction through it can be disrupted upon white-light illumination. This behavior should be contrasted against the positive photoconductivity behavior commonly exhibited by oxides or perovskites having narrower bandgaps. The negative photoconductivity effect may be explained in terms of a photon-induced excitation of surrounding oxygen ions, which leads to migration and subsequent recombination with vacancies in the conducting filament. The finding suggests possible electrical-cum-optical applications for HfO{sub 2}-based devices, whose functionality is limited to-date by electrical stimulation.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Tuning carrier mobility without spin transport degrading in copper-phthalocyanine

We demonstrate more than one order of magnitude of carrier mobility tuning for the copper-phthalocyanine (CuPc) without spin transport degrading in organic spin valve devices. Depending on the preparation conditions, organic spin valves with the CuPc film mobility of 5.78 × 10{sup −3} and 1.11 × 10{sup −4} cm{sup 2}/V s are obtained for polycrystalline and amorphous CuPc, respectively. Strikingly, the spin diffusion lengths are almost the same regardless of their mobilities that are ∼50 times different, which is in sharp contrast with previous prediction. These findings directly support that the spin relaxation in CuPc is dominated by the spin-orbit coupling.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

The integrated Earth system model version 1: formulation and functionality

The integrated Earth system model (iESM) has been developed as a new tool for projecting the joint human/climate system. The iESM is based upon coupling an integrated assessment model (IAM) and an Earth system model (ESM) into a common modeling infrastructure. IAMs are the primary tool for describing the human–Earth system, including the sources of global greenhouse gases (GHGs) and short-lived species (SLS), land use and land cover change (LULCC), and other resource-related drivers of anthropogenic climate change. ESMs are the primary scientific tools for examining the physical, chemical, and biogeochemical impacts of human-induced changes to the climate system. The iESM project integrates the economic and human-dimension modeling of an IAM and a fully coupled ESM within a single simulation system while maintaining the separability of each model if needed. Both IAM and ESM codes are developed and used by large communities and have been extensively applied in recent national and international climate assessments. By introducing heretofore-omitted feedbacks between natural and societal drivers, we can improve scientific understanding of the human–Earth system dynamics. Potential applications include studies of the interactions and feedbacks leading to the timing, scale, and geographic distribution of emissions trajectories and other human influences, corresponding climate effects, and the subsequent impacts of a changing climate on human and natural systems. This paper describes the formulation, requirements, implementation, testing, and resulting functionality of the first version of the iESM released to the global climate community.

54 ENVIRONMENTAL SCIENCES↗

Numerical simulations of the two-dimensional multimode Richtmyer-Meshkov instability

We show the two-dimensional Richtmyer-Meshkov instability occurs as shock waves pass through a perturbed material interface, triggering transition to an inhomogeneous turbulence variable density flow. This paper presents a series of large-eddy-simulations of the two dimensional turbulent RM instability and compares the results to the fully three dimensional simulations. There are two aims for this paper, the first is to explore what numerical resolution is required for a statistically converged solution for a two dimensional inhomogeneous flow field. The second aim is to elucidate the key differences in flow physics between the two dimensional and three dimensional Richtmyer-Meshkov instabilities, particularly their asymptotic self-similar regime. Convergence is achieved using 64 independent realisations and grid resolutions up to 4096 2 in the plane. It is shown that for narrowband cases the growth rate θ = 0.48 which is substantially higher than the three-dimensional equivalent. Mix measures are consistently lower compared to three-dimensional, and the kinetic energy distribution is homogeneous at late time. The broadband case has a similar initial growth rate as the three-dimensional case, with a marginally lower θ = 0.63. Mix is similar in magnitude, but is reducing at late time. The spectra in both cases exhibit the dual-cascade expected from two-dimensional turbulence.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Femtosecond laser-induced phase transformations in amorphous Cu{sub 77}Ni{sub 6}Sn{sub 10}P{sub 7} alloy

In this study, the femtosecond laser-induced crystallization of CuNiSnP amorphous ribbons was investigated by utilizing an amplified Ti:sapphire laser system. X-ray diffraction and scanning electronic microscope were applied to examine the phase and morphology changes of the amorphous ribbons. Micromachining without crystallization, surface patterning, and selective crystallization were successfully achieved by changing laser parameters. Obvious crystallization occurred under the condition that the laser fluence was smaller than the ablation threshold, indicating that the structural evolution of the material depends strongly on the laser parameters. Back cooling method was used to inhibit heat accumulation; a reversible transformation between the disordered amorphous and crystalline phases can be achieved by using this method.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗