Engineering Papers⌕ Search

Engineering topics

Zhang, Z.

Publications and source records attributed to Zhang, Z..

At least 145 records · Page 8

High-Ti-concentration aerogels for bright x-ray sources

Creating intense multi-keV x-ray sources is of great importance for several applications such as radiography of Inertial Confinement Fusion (ICF) plasma experiments and ablation studies. The objective here is to create nanosecond-long sources that are as bright as possible. Laser-heated targets of several types have been studied in the past; they contain mid-Z elements such as Ti, Fe or Ge to produce K-shell x rays with energies of a few keV. For instance, metal foils, pre-exploded foils, metal-doped aerogels, metal oxide nanofibers, and gas-filled targets can achieve from 1 to 10% laser-to-x-ray conversion efficiencies (CE).

42 ENGINEERING↗

Propagation of a short-pulse laser-driven electron beam in matter

We studied the transport of an intense electron beam produced by high intensity laser pulses through metals and insulators. Targets were irradiated at two different intensities, 10{sup 17} W/cm{sup 2} and 10{sup 19} W/cm{sup 2}, at the laser facility Xtreme Light XL-III in Beijing, a Ti:Sa laser source emitting 40 fs pulses at 800 nm. The main diagnostic was Cu-K{sub {alpha}} fluorescence imaging. Images of K{sub {alpha}} spots have been collected for those two laser intensities, for different target thickness, and for different materials. Experimental results are analyzed taking into account both collisional and collective effects as well as refluxing at the edge of the target. The target temperature is evaluated to be T{sub c} {approx} 6 eV for intensity I = 10{sup 17} W/cm{sup 2} (for all the tested materials: plastic, aluminium, and copper), and T{sub c} {approx} 60 eV in aluminium and 120 eV in titanium for intensity I = 10{sup 19} W/cm{sup 2}.

36 MATERIALS SCIENCE↗

Compatibility of Lithium Salts with Solvent of the Non-Aqueous Electrolyte in Li–O 2 Batteries

The stability of lithium salts, especially in the presence of reduced oxygen species, O 2 and H 2 O (even in a small amount), plays an important role in the cyclability and capacity of Li–O 2 cells. This combined experimental and computational study provides evidence that the stability of the electrolyte used in Li–O 2 cells strongly depends on the compatibility of lithium salts with solvent. In the case of the LiPF 6 -1NM3 electrolyte, the decomposition of LiPF 6 occurs in the cell as evidenced by in situ XRD, FT-IR and XPS analysis, which triggers the decomposition of 1NM3 solvent due to formation of HF from the decomposition of LiPF 6 . These reactions lead to degradation of the electrolyte and cause poor cyclability of the cell. The same reactions are not observed when LiTFSI and LiCF 3 SO 3 are used as the lithium salts in 1NM3 solvent, or LiPF 6 is used in TEGDME solvent.

25 ENERGY STORAGE↗

Large-Scale Features of Pliocene Climate: Results from the Pliocene Model Intercomparison Project

Climate and environments of the mid-Pliocene warm period (3.264 to 3.025 Ma) have been extensively studied.Whilst numerical models have shed light on the nature of climate at the time, uncertainties in their predictions have not been systematically examined. The Pliocene Model Intercomparison Project quantifies uncertainties in model outputs through a coordinated multi-model and multi-mode data intercomparison. Whilst commonalities in model outputs for the Pliocene are clearly evident, we show substantial variation in the sensitivity of models to the implementation of Pliocene boundary conditions. Models appear able to reproduce many regional changes in temperature reconstructed from geological proxies. However, data model comparison highlights that models potentially underestimate polar amplification. To assert this conclusion with greater confidence, limitations in the time-averaged proxy data currently available must be addressed. Furthermore, sensitivity tests exploring the known unknowns in modelling Pliocene climate specifically relevant to the high latitudes are essential (e.g. palaeogeography, gateways, orbital forcing and trace gasses). Estimates of longer-term sensitivity to CO2 (also known as Earth System Sensitivity; ESS), support previous work suggesting that ESS is greater than Climate Sensitivity (CS), and suggest that the ratio of ESS to CS is between 1 and 2, with a "best" estimate of 1.5.

mathematical models↗

4f and 5d energy levels of the divalent and trivalent lanthanide ions in M{sub 2}Si{sub 5}N{sub 8} (M=Ca, Sr, Ba)

Optical data of Sm, Tb and Yb doped Ca{sub 2}Si{sub 5}N{sub 8} and Sr{sub 2}Si{sub 5}N{sub 8} phosphors that have been prepared by solid-state synthesis, are presented. Together with luminescence data from literature on Ce{sup 3+} and Eu{sup 2+} doping in the M{sub 2}Si{sub 5}N{sub 8} (M=Ca, Sr, Ba) hosts, energy level schemes were constructed showing the energy of the 4f and 5d levels of all divalent and trivalent lanthanide ions relative to the valence and conduction band. The schemes were of great help in interpreting the optical data of the lanthanide doped phosphors and allow commenting on the valence stability of the ions, as well as the stability against thermal quenching of the Eu{sup 2+}d-f emission. Tb{sup 3+} substitutes on both a high energy and a low energy site in Ca{sub 2}Si{sub 5}N{sub 8}, due to which excitation at 4.77 eV led to emission from both the {sup 5}D{sub 3} and {sup 5}D{sub 4} levels, while excitation at 4.34 eV gave rise to mainly {sup 5}D{sub 4} emission. Doping with Sm resulted in typical Sm{sup 3+}f-f line absorption, as well as an absorption band around 4.1 eV in Ca{sub 2}Si{sub 5}N{sub 8} and 3.6 eV in Sr{sub 2}Si{sub 5}N{sub 8} that could be identified as the Sm{sup 3+} charge transfer band. Yb on the other hand was incorporated in both the divalent and the trivalent state in Ca{sub 2}Si{sub 5}N{sub 8}. - Graphical abstract: Energy level schemes showing the 4f ground states of the trivalent ( Black-Down-Pointing-Small-Triangle ) and divalent ( Black-Up-Pointing-Small-Triangle ) lanthanide ions and lowest energy 5d states of the trivalent ({nabla}) and divalent ({Delta}) ions with respect to the valence and conduction bands of Ca{sub 2}Si{sub 5}N{sub 8} (left) and Sr{sub 2}Si{sub 5}N{sub 8} (right). Highlights: Black-Right-Pointing-Pointer Construction of energy level schemes of all lanthanides within the M{sub 2}Si{sub 5}N{sub 8} hosts. Black-Right-Pointing-Pointer Construction was done by analyzing existing as well as new spectroscopic data. Black-Right-Pointing-Pointer Tb{sup 3+}d-f emission from two different Ca sites in Ca{sub 2}Si{sub 5}N{sub 8} has been observed. Black-Right-Pointing-Pointer Observation of the Sm{sup 3+} charge transfer band in Ca{sub 2}Si{sub 5}N{sub 8} and Sr{sub 2}Si{sub 5}N{sub 8}. Black-Right-Pointing-Pointer Ytterbium has been found in the divalent and trivalent state in Ca{sub 2}Si{sub 5}N{sub 8}.

36 MATERIALS SCIENCE↗

A grillage model for predicting wrinkles in annular graphene under circular shearing

This paper is concerned with a Timoshenko grillage model for modeling the wrinkling phenomenon in annular graphene under circular shearing applied at its inner edge. By calibrating the grillage model results against the molecular mechanics (MM) results, the grillage model comprising beams of elliptical cross-section orientated along the carbon-carbon bond has section dimensions of 0.06 nm for the major axis length and 0.036 nm for the minor axis length. Moreover, the beams are connected to one another at 0.00212 nm from the geometric centric. This eccentric connection of beams allows the proposed grillage model to cater for the cross-couplings among bonds that produce the out-of-plane wrinkling pattern. The out-of-plane to in-plane bending stiffnesses' ratio is 0.36, and the cross bending stiffness provided by the ellipse eccentricity is 0.025 times that of the in-plane bending stiffness. Besides furnishing identical wave numbers as well as amplitudes and wavelengths that are in good agreement with MM results, the grillage model can capture wrinkling patterns with a boundary layer, whereas plate and membrane models could not mimic the boundary layer.

36 MATERIALS SCIENCE↗

Achieving Accuracy Requirements for Forest Biomass Mapping: A Data Fusion Method for Estimating Forest Biomass and LiDAR Sampling Error with Spaceborne Data

The synergistic use of active and passive remote sensing (i.e., data fusion) demonstrates the ability of spaceborne light detection and ranging (LiDAR), synthetic aperture radar (SAR) and multispectral imagery for achieving the accuracy requirements of a global forest biomass mapping mission. This data fusion approach also provides a means to extend 3D information from discrete spaceborne LiDAR measurements of forest structure across scales much larger than that of the LiDAR footprint. For estimating biomass, these measurements mix a number of errors including those associated with LiDAR footprint sampling over regional - global extents. A general framework for mapping above ground live forest biomass (AGB) with a data fusion approach is presented and verified using data from NASA field campaigns near Howland, ME, USA, to assess AGB and LiDAR sampling errors across a regionally representative landscape. We combined SAR and Landsat-derived optical (passive optical) image data to identify forest patches, and used image and simulated spaceborne LiDAR data to compute AGB and estimate LiDAR sampling error for forest patches and 100m, 250m, 500m, and 1km grid cells. Forest patches were delineated with Landsat-derived data and airborne SAR imagery, and simulated spaceborne LiDAR (SSL) data were derived from orbit and cloud cover simulations and airborne data from NASA's Laser Vegetation Imaging Sensor (L VIS). At both the patch and grid scales, we evaluated differences in AGB estimation and sampling error from the combined use of LiDAR with both SAR and passive optical and with either SAR or passive optical alone. This data fusion approach demonstrates that incorporating forest patches into the AGB mapping framework can provide sub-grid forest information for coarser grid-level AGB reporting, and that combining simulated spaceborne LiDAR with SAR and passive optical data are most useful for estimating AGB when measurements from LiDAR are limited because they minimized forest AGB sampling errors by 15 - 38%. Furthermore, spaceborne global scale accuracy requirements were achieved. At least 80% of the grid cells at 100m, 250m, 500m, and 1km grid levels met AGB density accuracy requirements using a combination of passive optical and SAR along with machine learning methods to predict vegetation structure metrics for forested areas without LiDAR samples. Finally, using either passive optical or SAR, accuracy requirements were met at the 500m and 250m grid level, respectively.

Montesano, P. M.↗

PlantNATsDB: a comprehensive database of plant natural antisense transcripts

Natural antisense transcripts (NATs), as one type of regulatory RNAs, occur prevalently in plant genomes and play significant roles in physiological and pathological processes. Although their important biological functions have been reported widely, a comprehensive database is lacking up to now. Consequently, we constructed a plant NAT database (PlantNATsDB) involving approximately 2 million NAT pairs in 69 plant species. GO annotation and high-throughput small RNA sequencing data currently available were integrated to investigate the biological function of NATs. PlantNATsDB provides various user-friendly web interfaces to facilitate the presentation of NATs and an integrated, graphical network browser to display the complex networks formed by different NATs. Moreover, a ‘Gene Set Analysis’ module based on GO annotation was designed to dig out the statistical significantly overrepresented GO categories from the specific NAT network. PlantNATsDB is currently the most comprehensive resource of NATs in the plant kingdom, which can serve as a reference database to investigate the regulatory function of NATs. The PlantNATsDB is freely available at http://bis.zju.edu. cn/pnatdb/.

54 ENVIRONMENTAL SCIENCES↗

Communication: Stable carbon nanoarches in the initial stages of epitaxial growth of graphene on Cu(111)

To fully exploit the device potential of graphene, reliable production of large-area, high-qualitysamples is required. Epitaxial growth on metal substrates have shown promise in this regard, butfurther improvement would be facilitated by a more complete understanding of the atomistic processes involved in the early growth stages. Using first-principles calculations within density functionaltheory, we have investigated the energetics and kinetics of graphene nucleation and growthon a Cu(111) surface. Our calculations have revealed an energetic preference for the formationof stable one-dimensional carbon nanoarches consisting of 3–13 atoms when compared to twodimensionalcompact islands of equal sizes. We also estimate the critical cluster size that marksthe transition from nanoarch dominance to island dominance in the growth sequence. Our findingsmay provide the structural link between nucleated carbon dimers and larger carbon nanodomes,and are expected to stimulate future experimental efforts.

Van Wesep, Robert G.↗