Engineering Papers⌕ Search

Engineering topics

Yang, Yang

Publications and source records attributed to Yang, Yang.

At least 91 records · Page 5

Shape-Controlled NaTaO 3 by Flux-Mediated Synthesis

NaTaO 3 is a stable and wide bandgap n-type semiconductor material with many different applications. Here, a flux-mediated synthesis method is presented for NaTaO 3 resulting in highly distinctive, substrate covering shapes via precursor chemistry variation at comparatively low temperatures. It is found that the microstructure of the resulting NaTaO 3 films can be varied from nanocubes to smooth thin films. These shapes and surface chemistries can be correlated by employing density functional theory calculations and surface sensitive X-ray photoemission spectroscopy. This study provides guidance on how to synthesize the material and tailor its shape and surface termination for different applications. Finally, as a proof of concept of one possible application, NaTaO 3 is applied to perovskite solar cells as the electron transport layer, resulting in conversion efficiencies of >19%. Further, this study provides a new strategy for designing ternary oxide thin films for renewable energy applications.

38 RADIATION CHEMISTRY, RADIOCHEMISTRY, AND NUCLEA↗

In operando, non-invasive state-of-charge monitoring for redox flow batteries

This document describes techniques and systems for in operando, non-invasive SOC monitoring of redox flow batteries. The described techniques and systems allow for accurate, inexpensive, portable, and real-time methods to measure the SOC of redox flow batteries. System operators can monitor the SOC by measuring an acoustic attenuation coefficient of the electrolyte in the redox flow battery. The acoustic attenuation coefficient is measured using an ultrasonic transducer attached to a probing cell, which is connected to an electrolyte flow of a redox flow battery. The acoustic attenuation coefficient provides an accurate, real-time SOC measurement that is generally insensitive to varying operational temperatures of the electrolyte solution.

25 ENERGY STORAGE↗

Magnetic properties of equiatomic CrMnFeCoNi

Magnetic, specific heat, and structural properties of the equiatomic Cantor alloy system are reported for temperatures between 5 and 300 K, and up to fields of 70 kOe. Here magnetization measurements performed on as-cast, annealed, and cold-worked samples reveal a strong processing history dependence and that high-temperature annealing after cold working does not restore the alloy to a “pristine” state. Measurements on known precipitates show that the two transitions, detected at 43 and 85 K, are intrinsic to the Cantor alloy and not the result of an impurity phase. Experimental and ab initio density functional theory computational results suggest that these transitions are a weak ferrimagnetic transition and a spin-glass-like transition, respectively, and magnetic and specific heat measurements provide evidence of significant Stoner enhancement and electron-electron interactions within the material.

36 MATERIALS SCIENCE↗

Widespread Wildfires Over the Western United States in 2020 Linked to Emissions Reductions During COVID-19

Widespread wildfires struck western United States in 2020, directly damaging properties and threatening human lives. Meanwhile, the COVID-19 pandemic rapidly spread across the globe in 2020, which disrupted human activities and resulted in substantial reductions in anthropogenic emissions. Here, we investigate the effects of the emissions reductions of aerosols, precursors, and greenhouse gases during the pandemic on wildfire weather conditions in 2020 over western United States by using an earth system model together with observational data. We show that the COVID-19 emissions reductions in model experiments increased surface air temperature and decreased precipitation and relative humidity due to a weakened moisture transport, which explains 10-40% of the observed increase in the risk of wildfires over western United States in 2020. In conclusion, this study suggests that COVID-19-related abrupt emissions reductions have an unexpected influence on wildfires, highlighting a different but important role of human activities in affecting wildfire risks.

54 ENVIRONMENTAL SCIENCES↗

Signatures of non-Loudon-Fleury Raman scattering in the Kitaev magnet 𝛽−Li 2 ⁢IrO 3

We investigate the magnetic excitations of the hyperhoneycomb Kitaev magnet 𝛽−Li 2 ⁢IrO 3 by means of inelastic Raman scattering. The spectra exhibit the coexistence of a broad scattering continuum and two sharp low-energy peaks at 2.5 and 3 meV, with a distinctive polarization dependence. While the continuum is suggestive of fractional quasiparticles emerging from a proximate quantum spin liquid phase, the sharp peaks provide the first experimental signature of the “non-Loudon- Fleury” one-magnon scattering processes proposed recently. The corresponding microscopic mechanism is similar to the one leading to the symmetric off-diagonal exchange interaction Γ (because it involves a combination of both direct and ligand-mediated exchange paths) but is otherwise completely unexpected within the traditional Loudon-Fleury theory of Raman scattering. Furthermore, the present experimental verification therefore calls for a drastic reevaluation of Raman scattering in similar systems with strong spin-orbit coupling and multiple exchange paths.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Fast climate responses to emission reductions in aerosol and ozone precursors in China during 2013-2017

China has been implementing a sequence of policies for clean air since the year 2013, and the aerosol pollution has been substantially improved, but ozone (O 3 )-related issues arose. Here, fast climate responses to emission reductions in aerosol and O 3 precursors over China during 2013–2017 are investigated using the Community Earth System Model version 2 (CESM2). The overall decreases in aerosols produced an anomalous warming of 0.09 ± 0.10°C in eastern China (22–40° N, 110–122.5° E), which is further intensified by the increase in O 3 in the lower troposphere, resulting in an enhanced warming of 0.16 ± 0.15° C in eastern China. Reductions in industrial emissions contributed the most to the aerosol-induced warming, while emission reductions from residential sector induced a cooling effect due to a substantial decrease in light-absorbing black carbon aerosols. This implies that switching the residential sector to cleaner energy is more effective to achieve climate and health benefits in China.

54 ENVIRONMENTAL SCIENCES↗

Hybrid Nanocrystals of Small Molecules and Chemically Disordered Polymers

Organic crystals formed by small molecules can be highly functional but are often brittle or insoluble structures with limited possibilities for use or processing from a liquid phase. A possible solution is the nanoscale integration of polymers into organic crystals without sacrificing long-range order and therefore function. This enables the organic crystals to benefit from the advantageous mechanical and chemical properties of the polymeric component. We report here on a strategy in which small molecules co-crystallize with side chains of chemically disordered polymers to create hybrid nanostructures containing a highly ordered lattice. Synchrotron X-ray scattering, absorption spectroscopy, and coarse-grained molecular dynamics simulations reveal that the polymer backbones form an “exo-crystalline” layer of disordered chains that wrap around the nanostructures becoming a handle for interesting properties. The morphology of this “hybrid bonding polymer” nanostructure is dictated by the competition between the polymers’ entropy and the enthalpy of the lattice allowing for control over the aspect ratio of the nanocrystal by changing the degree of polymer integration. Further, we observed that nanostructures with an exo-crystalline layer of polymer exhibit enhanced fracture strength, self-healing capacity, and dispersion in water, which benefits their use as light-harvesting assemblies in photocatalysis. Guided by computation, future work could also explore these hybrid nanostructures as building blocks for functional materials.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Additive engineering for robust interphases to stabilize high-Ni layered structures at ultra-high voltage of 4.8 V

Nickel-rich layered cathode materials promise high energy density for next-generation batteries when coupled with lithium metal anodes. However, the practical capacities accessible are far less than the theoretical values due to their structural instability during cycling, especially when charged at high voltages. Here we demonstrate that stable cycling with an ultra-high cut-off voltage of 4.8 V can be realized by using an appropriate amount of lithium difluorophosphate in a common commercial electrolyte. The Li||LiNi 0.76 Mn 0.14 Co 0.10 O 2 cell retains 97% of the initial capacity (235 mAh g -1 ) after 200 cycles. The cycling stability is ascribed to the robust interphase on the cathode. It is formed by lithium difluorophosphate decomposition, which is facilitated by the catalytic effect of transition metals. The decomposition products (Li 3 PO 4 and LiF) form a protective interphase. This suppresses transition metal dissolution and cathode surface reconstruction. It also facilitates uniform Li distribution within the cathode, effectively mitigating the strain and crack formation.

25 ENERGY STORAGE↗

Dynamics of particle network in composite battery cathodes

We report that improving composite battery electrodes requires a delicate control of active materials and electrode formulation. The electrochemically active particles fulfill their role as energy exchange reservoirs through interacting with the surrounding conductive network. We formulate a network evolution model to interpret the regulation and equilibration between electrochemical activity and mechanical damage of these particles. Through statistical analysis of thousands of particles using x-ray phase contrast holotomography in a LiNi 0.8 Mn 0.1 Co 0.1 O 2 -based cathode, we found that the local network heterogeneity results in asynchronous activities in the early cycles, and subsequently the particle assemblies move toward a synchronous behavior. Our study pinpoints the chemomechanical behavior of individual particles and enables better designs of the conductive network to optimize the utility of all the particles during operation.

25 ENERGY STORAGE↗

Polyoxometalate‐Surfactant Assemblies: Responsiveness to Orthogonal Stimuli

Abstract Integrating different types of supramolecular interactions opens the possibility to generate nanoparticle surfactants (NPSs) at the liquid–liquid interface that are responsive to multiple stimuli. Here we develop a covalently modified polyoxometalate/β‐cyclodextrin (POM/β‐CD) organic–inorganic hybrid, consisting of a negatively charged POM cluster with β‐CD host groups. The POM/β‐CD hybrid can be dispersed in water and interacts at a water/oil interface with ligands dissolved in an oil phase through electrostatic or host–guest interactions, thereby generating POM‐surfactants (POMSs) having pH, redox, and guest‐competitive responsiveness, respectively. By taking advantage of the jamming of POMSs at the interface, a reconfigurable all‐liquid system could be produced that is responsive to orthogonal changes in the external environment.

Xia, Zhiqin↗

Polyoxometalate‐Surfactant Assemblies: Responsiveness to Orthogonal Stimuli

Abstract Integrating different types of supramolecular interactions opens the possibility to generate nanoparticle surfactants (NPSs) at the liquid–liquid interface that are responsive to multiple stimuli. Here we develop a covalently modified polyoxometalate/β‐cyclodextrin (POM/β‐CD) organic–inorganic hybrid, consisting of a negatively charged POM cluster with β‐CD host groups. The POM/β‐CD hybrid can be dispersed in water and interacts at a water/oil interface with ligands dissolved in an oil phase through electrostatic or host–guest interactions, thereby generating POM‐surfactants (POMSs) having pH, redox, and guest‐competitive responsiveness, respectively. By taking advantage of the jamming of POMSs at the interface, a reconfigurable all‐liquid system could be produced that is responsive to orthogonal changes in the external environment.

Xia, Zhiqin↗

Harvesting Wave Energy to Power Acoustic Transmitters Using Triboelectric Nanogenerator

Wave energy has the largest reserves and widest distribution among blue energy sources. However, the conversion and utilization of ocean wave energy are challenging. In this work, we developed a contact-separation mode triboelectric nanogenerator (TENG) with a simple structure for harvesting wave energy and powering marine sensors and transmitters and performed detailed electrical characterization under controlled laboratory conditions. A prototype power management circuit (PMC) was implemented to improve the output performance of the TENG. The output from the PMC could charge up a storage capacitor for powering sensors and electronics. Eventually, the TENG was integrated within a water-proof enclosure and tested using a custom-built wave simulator to evaluate the device performance in a more representative scenario. The device sustainably powered up an array of 27 LEDs and was able to charge up a capacitor up to 1.8 V for driving an acoustic transmitter. The results demonstrate that TENG technology shows great promise in harvesting low-frequency ocean wave energy.

Yang, Yang↗

Brown Carbon Fuel and Emission Source Attributions to Global Snow Darkening Effect

Snow and ice albedo reduction due to deposition of absorbing particles (i.e., snow darkening effect (SDE)) warms the Earth system and is largely attributed to black carbon (BC) and dust. Absorbing organic aerosol (BrC) also contributes to SDE but has received less attention due to uncertainty and challenges in model representation. This work incorporates the SDE of absorbing organic aerosol (BrC) from biomass burning and biofuel sources into the Snow Ice and Aerosol Radiative (SNICAR) model within a variant of the Community Earth System Model (CESM). Additionally, 12 different emission regions of BrC and BC from biomass burning and biofuel sources are tagged to quantify the relative contribution to global and regional SDE. BrC global SDE (0.021–0.056 Wm -2 ) is larger than other model estimates, corresponding to 37%–98% of the SDE from BC. When compared to observations, BrC simulations have a range in median bias (-2.5% to +21%), with better agreement in the simulations that include BrC photochemical bleaching. The largest relative contributions to global BrC SDE are traced to Northern Asia (23%–31%), Southeast Asia (16%–21%), and South Africa (13%–17%). Transport from Southeast Asia contributes nearly half of the regional BrC SDE in Antarctica (0.084–0.3 Wm -2 ), which is the largest regional input to global BrC SDE. Lower latitude BrC SDE is correlated with snowmelt, in-snow BrC concentrations, and snow cover fraction, while polar BrC SDE is correlated with surface insolation and snowmelt. This indicates the importance of in-snow processes and snow feedbacks on modeled BrC SDE.

54 ENVIRONMENTAL SCIENCES↗

Lab-on-a-Fish Monitoring Software V1.0

This is the original monitoring software for processing and displaying data for Lab-on-a-Fish. Lab-on-a-Fish simultaneously evaluates and monitors the health, behavior, and environment of fish or small aquatic species. The sensor is a miniaturized underwater monitoring system that measures animal behavior (acceleration and gyration); physiology (electrocardiogram and electromyogram); and environmental parameters (temperature, pressure, and magnetic sensor).

Deng, Daniel↗

Stability-limiting heterointerfaces of perovskite photovoltaics

Optoelectronic devices consist of heterointerfaces formed between dissimilar semiconducting materials. The relative energy level alignment between contacting semiconductors determinately affects the heterointerface charge injection and extraction dynamics. For perovskite solar cells (PSCs), the heterointerface between the top perovskite surface and a charge-transporting material (CTM) is often treated for defect passivation to improve PSC stability and performance. However, such surface treatments could also affect the heterointerface energetics. Here we show that surface treatments may induce a negative work function shift (i.e. more n-type), which activates halide migration to aggravate PSC instability. Therefore, despite the beneficial effects of surface passivation, this detrimental side effect limits the maximum stability improvement attainable for PSCs treated in these ways. Furthermore, this trade-off between the beneficial and detrimental effects should guide further work on improving PSC stability via surface treatments.

14 SOLAR ENERGY↗