Engineering topics
Yang, Yang
Publications and source records attributed to Yang, Yang.
Ion-beam radiation-induced Eshelby transformations: The mean and variance in hydrostatic and shear residual stresses
Ion beam plays a pivotal role in ion implantations and the fabrication of nanostructures. However, there lacks a quantitative model to describe the residual stresses associated with the ion-beam radiation. Radiation-induced residual stress/transformation strain have been mostly recognized in the hydrostatic sub strain space. Here, in this study, we use molecular dynamics (MD) simulations to show that the response of a material to irradiation is generally anisotropic that depends on the ion-beam direction, and should be described using tensorial quantities. We demonstrate that accelerator-based ion beam irradiation, combined with the intrinsic lattice anisotropy and externally induced anisotropy (such as anisotropic mechanical loadings), causes radiation-actuated shear transformation strains in addition to hydrostatic expansion. We map out these complex correlations for several materials. Radiation-induced defects are shown to be responsible for residual shear stresses in the manner of Eshelby inclusion transformation. We propose such tensorial response model should be considered for accurate nanoscale fabrication using ion-beam irradiation.
Summertime ozone pollution in China affected by stratospheric quasi-biennial oscillation
In recent years, the near-surface ozone (O 3 ) level has been rising fast in China, with increasing damage to human health and ecosystems. In this study, the impact of stratospheric quasi-biennial oscillation (QBO) on interannual variations in summertime tropospheric O 3 over China is investigated based on GEOS-Chem model simulations and satellite retrievals. QBO has a significant positive correlation with near-surface O 3 concentrations over central China (92.5–112.5° E, 26–38° N) when the sea surface temperature (SST) over the eastern tropical Pacific is warmer than normal, with a correlation coefficient of 0.53, but QBO has no significant effect on O 3 under the cold SST anomaly. Compared to the easterly phase of QBO, the near-surface O 3 concentrations have an increase of up to 3 ppb (5% relative to the average) over central China during its westerly phase under the warm SST anomaly. O 3 also increases above the surface and up to the upper troposphere, with a maximum increase of 2–3 ppb (3%–5%) in 850–500 hPa over central China when comparing westerly phase to easterly phase. Process-based analysis and sensitivity simulations suggest that the O 3 increase over central China is mainly attributed to the anomalous downward transport of O 3 during the westerly phase of QBO when a warm SST anomaly occurs in the eastern tropical Pacific, while the local chemical reactions and horizontal transport processes partly offset the O 3 increase. This work suggests a potentially important role of QBO and the related vertical transport process in affecting near-surface O 3 air quality, with an indication for O 3 pollution prediction and prevention.
Climate-driven deterioration of future ozone pollution in Asia predicted by machine learning with multi-source data
Ozone (O 3 ) is a secondary pollutant in the atmosphere formed by photochemical reactions that endangers human health and ecosystems. O 3 has aggravated in Asia in recent decades and will vary in the future. In this study, to quantify the impacts of future climate change on O 3 pollution, near-surface O 3 concentrations over Asia in 2020–2100 are projected using a machine learning (ML) method along with multi-source data. The ML model is trained with combined O 3 data from a global atmospheric chemical transport model and real-time observations. The ML model is then used to estimate future O 3 with meteorological fields from multi-model simulations under various climate scenarios. The near-surface O 3 concentrations are projected to increase by 5 %–20 % over South China, Southeast Asia, and South India and less than 10 % over North China and the Gangetic Plains under the high-forcing scenarios in the last decade of 21st century, compared to the first decade of 2020–2100. The O 3 increases are primarily owing to the favorable meteorological conditions for O 3 photochemical formation in most Asian regions. We also find that the summertime O 3 pollution over eastern China will expand from North China to South China and extend into the cold season in a warmer future. Our results demonstrate the important role of a climate change penalty on Asian O 3 in the future, which provides implications for environmental and climate strategies of adaptation and mitigation.
Pre-zeolite framework super-MIEC anodes for high-rate lithium-ion batteries
New physical insights and a robust approach are provided to develop super-MIEC anodes for high-rate batteries, which would bridge two materials families—nanoporous framework materials and conductive oxides.
Three-dimensional Zn-based alloys for dendrite-free aqueous Zn battery in dual-cation electrolytes
Aqueous zinc-ion batteries, in terms of integration with high safety, environmental benignity, and low cost, have attracted much attention for powering electronic devices and storage systems. However, the interface instability issues at the Zn anode caused by detrimental side reactions such as dendrite growth, hydrogen evolution, and metal corrosion at the solid (anode)/liquid (electrolyte) interface impede their practical applications in the fields requiring long-term performance persistence. Despite the rapid progress in suppressing the side reactions at the materials interface, the mechanism of ion storage and dendrite formation in practical aqueous zinc-ion batteries with dual-cation aqueous electrolytes is still unclear. Herein, we design an interface material consisting of forest-like three-dimensional zinc-copper alloy with engineered surfaces to explore the Zn plating/stripping mode in dual-cation electrolytes. The three-dimensional nanostructured surface of zinc-copper alloy is demonstrated to be in favor of effectively regulating the reaction kinetics of Zn plating/stripping processes. The developed interface materials suppress the dendrite growth on the anode surface towards high-performance persistent aqueous zinc-ion batteries in the aqueous electrolytes containing single and dual cations. This work remarkably enhances the fundamental understanding of dual-cation intercalation chemistry in aqueous electrochemical systems and provides a guide for exploring high-performance aqueous zinc-ion batteries and beyond.
Dual-Color Optical Recording of Bioelectric Potentials by Polymer Electrochromism
Optical recording based on voltage-sensitive fluorescent reporters allows for spatial flexibility of measuring from desired cells, but photobleaching and phototoxicity of the fluorescent labels often limit their sensitivity and recording duration. Voltage-dependent optical absorption, rather than fluorescence, of electrochromic materials, would overcome these limitations to achieve long-term optical recording of bioelectrical signals. Electrochromic materials such as PEDOT:PSS possess the property that an applied voltage can either increase or decrease the light absorption depending on the wavelength. In this work, we harness this anticorrelated light absorption at two different wavelengths to significantly improve the signal detection. With dual-color detection, electrical activity from cells produces signals of opposite polarity, while artifacts, mechanical motions, and technical noises are uncorrelated or positively correlated. Using this technique, we are able to optically record cardiac action potentials with a high signal-to-noise ratio, 10 kHz sampling rate, >15 min recording duration, and no time-dependent degradation of the signal. Furthermore, we can reliably perform multiple recording sessions from the same culture for over 25 days.
Brown Carbon Fuel and Emission Source Attributions to Global Snow Darkening Effect.
Abstract not provided.
Suppressing ion migration in metal halide perovskite via interstitial doping with a trace amount of multivalent cations
Cations with suitable sizes to occupy an interstitial site of perovskite crystals have been widely used to inhibit ion migration and promote the performance and stability of perovskite optoelectronics. However, such interstitial doping inevitably leads to lattice microstrain that impairs the long-range ordering and stability of the crystals, causing a sacrificial trade-off. Here, we unravel the evident influence of the valence states of the interstitial cations on their efficacy to suppress the ion migration. Incorporation of a trivalent neodymium cation (Nd 3+ ) effectively mitigates the ion migration in the perovskite lattice with a reduced dosage (0.08%) compared to a widely used monovalent cation dopant (Na + , 0.45%). As a result, the photovoltaic performances and operational stability of the prototypical perovskite solar cells are enhanced with a trace amount of Nd 3+ doping while minimizing the sacrificial trade-off.
Dust pollution in China affected by different spatial and temporal types of El Niño
Dust is an important aerosol affecting air quality in China in the winter and spring seasons. Dust in China is potentially influenced by the interannual climate variability associated with El Niño. Here, the impacts of El Niño with different temporal and spatial types on dust pollution in boreal winter and spring in China and the potential mechanisms are investigated using a state-of-the-art Earth system model (E3SMv1). We find that the eastern Pacific (EP) and central Pacific (CP) El Niño both increase wintertime dust concentrations by 5–50 µg m –3 over central-eastern China. Due to a stronger wind and lower relative humidity, which favor dust emissions near sources, and a strengthened northwesterly and reduced precipitation, which are conducive to dust transport, dust concentrations during the CP El Niño are 5–20 µg m –3 higher in northern China than during the EP El Niño, although the changes are mostly insignificant. El Niño with a short duration (SD) increases boreal winter dust concentrations by 20–100 µg m –3 over northern China relative to the climatological mean, while there is a decrease of 5–50 µg m –3 during the long-duration (LD) El Niño, which is also related to the El Niño-induced changes in atmospheric circulation, precipitation, and relative humidity. In the following spring season, all types of El Niño events enhance dust over northern China, but only the increase during the LD El Niño is statistically significant, suggesting that the weaker intensity but longer duration of the LD El Niño events can significantly affect spring dust in China. Our results contribute to the current knowledge of the influence of El Niño on dust pollution, which has profound implications for air pollution control and dust storm prediction.
Climate Warming Alters Nutrient Storage in Seasonally Dry Forests: Insights From a 2,300 m Elevation Gradient
Understanding potential response of forest carbon (C) and nutrient storage to warming is important for climate mitigation policies. Unfortunately, those responses are difficult to predict in seasonally dry forests, in part, because ecosystem processes are highly sensitive to both changes in temperature and precipitation. We investigated how warming might alter stocks of C, nitrogen (N), and phosphorus (P) in vegetation and the entire regolith (soil + weathered bedrock or “saprock”) using a space-for-time substitution along a bioclimatic gradient in the Sierra Nevada, California. The pine-oak and mixed-conifer forests between 1,160–2,015 m elevation have more optimal climates (not too dry or hot) for ecosystem productivity, soil weathering, and cycling of essential elements than the oak savannah (405 m) and subalpine forest (2,700 m). We found decreases in overstory vegetation nutrient stocks with decreasing elevation because of enhanced water limitation and greater occurrence of disturbances. Stocks of C, N, and P in the entire regolith peaked at the pine-oak and mixed-conifer forests across the bioclimatic gradient, driven by thicker regolith profiles and greater nutrient input rates. These observations suggest long-term warming will decrease ecosystem nutrient storage at the warmer, transitional pine-oak zone, but will increase nutrient storage at the colder, subalpine zone. Assuming steady-state conditions, we found the mean residence time of ecosystem C decreased with projected rising air temperatures and increased following a major drought event across the bioclimatic gradient. Our study emphasizes potentially elevation-dependent changes in nutrient storage and C persistence with warming in seasonally dry forests.
Summer ozone pollution in China affected by the intensity of Asian monsoon systems
Not Available
MXene-Based Porous Monoliths
In the past decade, a thriving family of 2D nanomaterials, transition-metal carbides/nitrides (MXenes), have garnered tremendous interest due to its intriguing physical/chemical properties, structural features, and versatile functionality. Integrating these 2D nanosheets into 3D monoliths offers an exciting and powerful platform for translating their fundamental advantages into practical applications. Introducing internal pores, such as isotropic pores and aligned channels, within the monoliths can not only address the restacking of MXenes, but also afford a series of novel and, in some cases, unique structural merits to advance the utility of the MXene-based materials. Here, a brief overview of the development of MXene-based porous monoliths, in terms of the types of microstructures, is provided, focusing on the pore design and how the porous microstructure affects the application performance.
Metallurgical alloy approach to two-dimensional supramolecular materials
Alloys are normally mixtures of metallic elements used to search for superior functional properties compared with their individual components. Although a quintessential approach to better materials in metallurgy, the concept of alloying has been expanded to other inorganic materials and covalent polymers. In this work, we report on alloy formation of small organic molecules structured as amphiphilic chromophores in water. Using X-ray scattering, microscopy, and optical spectroscopy, we unambiguously demonstrate the formation of supramolecular alloys with changes in physical, photophysical, and mechanical properties. Additionally, we identify single-crystalline, two-dimensional supramolecular polymers containing multiple molecular species, analogous to intermetallic compounds. The mechanism of alloy formation suggests the possibility of controlled growth in these supramolecular assemblies to create emergent functional structures.
Single-Crystalline Ni-Rich LiNi x Mn y Co 1– x – y O 2 Cathode Materials: A Perspective
To drive electrical vehicles for long-range, the energy density of Li-ion batteries must be further enhanced, which requires high-energy cathode materials. Among them, Ni-rich LiNi x Mn y Co 1–x–y O 2 (x > 0.5, NMC) is one of the most promising candidates. However, traditional poly-crystal (PC) NMC materials, whose particles are secondary clusters consisting of many primary crystalline particles, are susceptible to pulverization along the inter grain/particle boundaries, resulting in poor cycle stability. Recently, single crystal (SC)-NMC cathodes are proposed as they are believed to have several merits such as high structural integrity, lower interface with electrolyte, and potentially better energy storage performance. Nevertheless, several queries, such as the merits of SC structure and the mechanism for their structure degradation, are still controversial and required to be addressed. Here, in this study, the synthesis parameters, properties, energy storage as well as safety of SC- and PC-NMC cathodes with various Ni contents are critically reviewed, for clarifying the merits and drawbacks of SC. Furthermore, the study focuses on the recent advances of insight mechanisms and strategies for stabilizing the structure/interface by doping, morphology engineering, surface coating, and composition tailoring. The remaining challenges, safety concerns, and perspectives to enhance the electrochemical performance of SC-NMC cathodes for electric vehicle application are followed.
Compositionally complex doping for zero-strain zero-cobalt layered cathodes
We report the high volatility of the price of cobalt and the geopolitical limitations of cobalt mining have made the elimination of Co a pressing need for the automotive industry. Owing to their high energy density and low-cost advantages, high-Ni and low-Co or Co-free (zero-Co) layered cathodes have become the most promising cathodes for next-generation lithium-ion batteries. However, current high-Ni cathode materials, without exception, suffer severely from their intrinsic thermal and chemo-mechanical instabilities and insufficient cycle life. Here, in this paper, by using a new compositionally complex (high-entropy) doping strategy, we successfully fabricate a high-Ni, zero-Co layered cathode that has extremely high thermal and cycling stability. Combining X-ray diffraction, transmission electron microscopy and nanotomography, we find that the cathode exhibits nearly zero volumetric change over a wide electrochemical window, resulting in greatly reduced lattice defects and local strain-induced cracks. In-situ heating experiments reveal that the thermal stability of the new cathode is significantly improved, reaching the level of the ultra-stable NMC-532. Owing to the considerably increased thermal stability and the zero volumetric change, it exhibits greatly improved capacity retention. This work, by resolving the long-standing safety and stability concerns for high-Ni, zero-Co cathode materials, offers a commercially viable cathode for safe, long-life lithium-ion batteries and a universal strategy for suppressing strain and phase transformation in intercalation electrodes.