Engineering Papers⌕ Search

Engineering topics

Yang, Dali

Publications and source records attributed to Yang, Dali.

51 records · Page 3

Hollow Fibers Structured Packings in Olefin/Paraffin Distillation: Apparatus Scale-Up and Long-Term Stability

Following the conceptual demonstration of high separation efficiency and column capacity obtained in olefin/paraffin distillation using hollow fiber structured packings (HFSPs) in a bench scale (J. Membr. Sci.2006, 2007, and 2010), we scaled-up this process with a 10-fold increase in the internal flow rate and a 3-fold increase in the module length. We confirmed that the HFSPs technology gives high separation efficiency and column capacity in iso-/n-butane distillation for 18 months. We systematically investigated the effects of packing density, concentration of light component, reflux ratio, and module age on the separation efficiency and operating stability. The comprehensive characterizations using scanning electron microscopy (SEM), Brunauer–Emmett–Teller (BET), thermogravimetric analysis (TGA), differential scanning calorimetry (DSC), and dynamic mechanical analysis (DMA) were carried out to probe the changes in the morphological, thermal, and mechanical properties of polypropylene (PP) hollow fibers over the aging process. Our results suggest that after a long-term exposure to light hydrocarbon environments at ≤70 °C the morphological and mechanical properties of the PP polymer do not degrade significantly in a propane/propylene and iso-/n-butane environment.

36 MATERIALS SCIENCE↗

Enhanced Separation Efficiency in Olefin/Paraffin Distillation (Final Report)

Over the last three years, Los Alamos National Laboratory (LANL) has developed and demonstrated a novel technology using high specific area hollow fibers as structured packings (HFSPs) in distillation. When replacing conventional packing materials used in olefin/paraffin distillation, hollow fibers can attain significantly higher separation efficiencies (>20%) and column capacity (>20 times). Refineries currently use trays or other structured packings for distillation, leading to interruptions in production due to flooding risks, poor separation efficiency, low productivity, high-energy consumption, significant CO 2 emissions, and large size. Our HFSPs address all of these issues.

02 PETROLEUM↗

Effect of Sample Size on the Mechanical Properties of SX 358 Foam

To visualize the morphological changes of foams while they are being compressed, the compression tests are conducted within a micro X-ray computed tomographic (MXCT) system. To better capture the changes in the micro-scales, the sample is often cut into a small disk with a diameter less than a few millimeters. The questions raised are how representative the bulk properties, like mechanical properties, are if the measurements are conducted using small samples and whether there is a critical sample size for the reliable measurements. In this work, we conducted a preliminary study to address these questions.

36 MATERIALS SCIENCE↗

Estane Molecular Weight Analysis in PBX 9501 Samples; Slice 'N Dice Study

T Division is creating a model of aging in PBX 9501 that will benefit from molecular weight mapping of hemispherical charges (“hemi’s”) that have been in the stockpile. Two hemi’s were prepared at Pantex by machining out sections and then machining those sections into cubes, which is why the project is referred to as a “Slice ‘N Dice” study. Two sections were cut from each hemi. One section was used for density mapping and the other was for molecular weight analysis. The molecular weight section pieces were cut so that both Pantex and LANL would be able to analyze cubes from approximately the same areas in order to compare results. Pantex analyzed all of their samples earlier in 2011. LANL’s Slice ‘N Dice samples were received in February of 2012 where they were inventoried, weighed and prepared by WX-7 and analyzed by both WX-7 and MST-7.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Enrichment of light hydrocarbon mixture

Light hydrocarbon enrichment is accomplished using a vertically oriented distillation column having a plurality of vertically oriented, nonselective micro/mesoporous hollow fibers. Vapor having, for example, both propylene and propane is sent upward through the distillation column in between the hollow fibers. Vapor exits neat the top of the column and is condensed to form a liquid phase that is directed back downward through the lumen of the hollow fibers. As vapor continues to ascend and liquid continues to countercurrently descend, the liquid at the bottom of the column becomes enriched in a higher boiling point, light hydrocarbon (propane, for example) and the vapor at the top becomes enriched in a lower boiling point light hydrocarbon (propylene, for example). The hollow fiber becomes wetted with liquid during the process.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Future perspectives of using hollow fibers as structured packings in light hydrocarbon distillation

Olefin and paraffin are the largest chemical commodities. Furthermore, they are major building blocks for the petrochemical industry. Each year, petroleum refining, consumes 4,500 TBtu/yr in separation energy, making it one of the most energy-intensive industries in the United States). Just considering liquefied petroleum gas (ethane/propane/butane) and olefins (ethylene and propylene) alone, the distillation energy consumption is about 400 TBtu/yr in the US. Since petroleum distillation is a mature technology, incremental improvements in column/tray design will only provide a few percent improvements in the performance. However, each percent saving in net energy use amounts to savings of 10 TBtu/yr and reduces CO{sub 2} emissions by 0.2 MTon/yr. In practice, distillation columns require 100 to 200 trays to achieve the desired separation. The height of a transfer unit (HTU) of conventional packings is typical in the range of 36-60 inch. Since 2006, we had explored using several non-selective membranes as the structured packings to replace the conventional packing materials used in propane and propylene distillation. We obtained the lowest HTU of < 8 inch for the hollow fiber column, which was >5 times shorter than that of the conventional packing materials. In 2008, we also investigated this type of packing materials in iso-/n-butane distillation. Because of a slightly larger relative volatility of iso-/n-butane than that of propane/propylene, a wider and a more stable operational range was obtained for the iso-/n-butane pair. However, all of the experiments were conducted on a small scale with flowrate of < 25 gram/min. Recently, we demonstrated this technology on a larger scale (<250 gram/min). Within the loading range of F-factor < 2.2 Pa{sup 0.5}, a pressure drop on the vapor side is below 50 mbar/m, which suggests that the pressure drop of hollow fibers packings is not an engineering barrier for the applications in distillations. The thermal stability study suggests that polypropylene hollow fibers are stable after a long time exposure to C{sub 2} - C{sub 4} mixtures. The effects of packing density on the separation efficiency will be discussed.

02 PETROLEUM↗

Enrichment of light hydrocarbon mixture

Light hydrocarbon enrichment is accomplished using a vertically oriented distillation column having a plurality of vertically oriented, nonselective micro/mesoporous hollow fibers. Vapor having, for example, both propylene and propane is sent upward through the distillation column in between the hollow fibers. Vapor exits neat the top of the column and is condensed to form a liquid phase that is directed back downward through the lumen of the hollow fibers. As vapor continues to ascend and liquid continues to countercurrently descend, the liquid at the bottom of the column becomes enriched in a higher boiling point, light hydrocarbon (propane, for example) and the vapor at the top becomes enriched in a lower boiling point light hydrocarbon (propylene, for example). The hollow fiber becomes wetted with liquid during the process.

03 NATURAL GAS↗

Ensemble phase averaging equations for multiphase flows in porous media, part I: the bundle-of-tubes model

A bundle-of-tubes construct is used as a model system to study ensemble averaged equations for multiphase flow in a porous material. Momentum equations for the fluid phases obtained from the method are similar to Darcy's law, but with additional terms. We study properties of the additional terms, and the conditions under which the averaged equations can be approximated by the diffusion model or the extended Darcy's law as often used in models for multiphase flows in porous media. Although the bundle-of-tubes model is perhaps the simplest model for a porous material, the ensemble averaged equation technique developed in this paper assumes the very same form in more general treatments described in Part 2 of the present work (Zhang 2009). Any model equation system intended for the more general cases must be understood and tested first using simple models. The concept of ensemble phase averaging is dissected here in physical terms, without involved mathematics through its application to the idealized bundle-of-tubes model for multiphase flow in porous media.

36 MATERIALS SCIENCE↗

Hydrogen adsorption in thin films of Prussian blue analogue

Quartz crystal microbalance with dissipation (QCM-D) measurement was used to investigate the kinetics of the molecular hydrogen adsorption into thin films of prussian blue analogues - Cu{sub 3}[Co(CN){sub 6}]{sub 2} at ambient conditions. Although the equilibrium adsorption seems to be independent of the thickness, the adsorption rate substantially decreases with the thickness of the films. In addition, the reversibility of H{sub 2} adsorption into the Cu{sub 3}[Co(CN){sub 6}]{sub 2} films was investigated. The results indicate that the Cu{sub 3}[Co(CN){sub 6}]{sub 2} maily interacts with H{sub 2} molecules physically. The highest H{sub 2} uptake by the Cu{sub 3}[Co(CN){sub 6}]{sub 2} films is obtained when the gas phase is stagnant inside the testing cell. However, the unusual high H{sub 2} uptake obtained from the QCM-D measurement makes us question how reliable this analytic methodology is.

36 MATERIALS SCIENCE↗