Engineering topics
Xue, Fei
Publications and source records attributed to Xue, Fei.
Giant elastic tunability in strained BiFeO3 near an electrically induced phase transition
Abstract not provided
Mechanical Switching of Nanoscale Multiferroic Phase Boundaries
Tuning the lattice degree of freedom in nanoscale functional crystals is critical to exploit the emerging functionalities such as piezoelectricity, shape-memory effect, or piezomagnetism, which are attributed to the intrinsic lattice-polar or lattice-spin coupling. In this study, it is reported that a mechanical probe can be a dynamic tool to switch the ferroic orders at the nanoscale multiferroic phase boundaries in BiFeO 3 with a phase mixture, where the material can be reversibly transformed between the “soft” tetragonal-like and the “hard” rhombohedral-like structures. The microscopic origin of the nonvolatile mechanical switching of the multiferroic phase boundaries, coupled with a reversible 180° rotation of the in-plane ferroelectric polarization, is the nanoscale pressure-induced elastic deformation and reconstruction of the spontaneous strain gradient across the multiferroic phase boundaries. The reversible control of the room-temperature multiple ferroic orders using a pure mechanical stimulus may bring us a new pathway to achieve the potential energy conversion and sensing applications.
Orientations of low-energy domain walls in perovskites with oxygen octahedral tilts
Not Available
Intrinsic SiO{sub x}-based unipolar resistive switching memory. II. Thermal effects on charge transport and characterization of multilevel programing
Multilevel programing and charge transport characteristics of intrinsic SiO{sub x}-based resistive switching memory are investigated using TaN/SiO{sub x}/n{sup ++}Si (MIS) and TiW/SiO{sub x}/TiW (MIM) device structures. Current transport characteristics of high- and low-resistance states (HRS and LRS) are studied in both device structures during multilevel operation. Analysis of device thermal response demonstrates that the effective electron energy barrier is strongly dependent on the resistance of the programed state, with estimates of 0.1 eV in the LRS and 0.6 eV in the HRS. Linear data fitting and conductance analyses indicate Poole-Frenkel emission or hopping conductance in the low-voltage region, whereas Fowler-Nordheim (F-N) or trap-assisted tunneling (TAT) is indicated at moderate voltage. Characterizations using hopping transport lead to hopping distance estimates of ∼1 nm in the LRS for both device structures. Relative permittivity values (ε{sub r}) were extracted using the Poole-Frenkel formulism and estimates of local filament temperature, where ε{sub r} values were ∼80 in the LRS and ∼4 in the HRS, suggesting a strongly polarized medium in the LRS. The onset of F-N tunneling or TAT corresponds to an observed “overshoot” in the I-V response with an estimated threshold of 1.6 ± 0.2 V, in good agreement with reported electro-luminescence results for LRS devices. Resistive switching is discussed in terms of electrochemical reactions between common SiO{sub 2} defects, and specific defect energy levels are assigned to the dominant transitions in the I-V response. The overshoot response in the LRS is consistent with TAT through either the Eγ' oxygen vacancy or the hydrogen bridge defect, both of which are reported to have an effective bandgap of 1.7 eV. The SET threshold at ∼2.5 V is modeled as hydrogen release from the (Si-H){sub 2} defect to generate the hydrogen bridge, and the RESET transition is modeled as an electrochemical reaction that re-forms (SiH){sub 2}. The results provide further insights into charge transport and help identify potential switching mechanisms in SiO{sub x}-based unipolar resistive switching memory.
Optimization of chemical compositions in low-carbon Al-killed enamel steel produced by ultra-fast continuous annealing
The influence of Mn,S and B contents on microstructural characteristics, mechanical properties and hydrogen trapping ability of low-carbon Al-killed enamel steel was investigated. The materials were produced and processed in a laboratory and the ultra-fast continuous annealing processing was performed using a continuous annealing simulator. It was found that increasing Mn,S contents in steel can improve its hydrogen trapping ability which is attributed by refined ferrite grains, more dispersed cementite and added MnS inclusions. Nevertheless, it deteriorates mechanical properties of steel sheet. Addition of trace boron results in both good mechanical properties and significantly improved hydrogen trapping ability. The boron combined with nitrogen segregating at grain boundaries, cementite and MnS inclusions, provides higher amount of attractive hydrogen trapping sites and raises the activation energy for hydrogen desorption from them. - Highlights: • We study microstructures and properties in low-carbon Al-killed enamel steel. • Hydrogen diffusion coefficients are measured to reflect fish-scale resistance. • Manganese improves hydrogen trapping ability but decrease deep-drawing ability. • Boron improves both hydrogen trapping ability and deep-drawing ability. • Both excellent mechanical properties and fish-scale resistance can be matched.
Phase field simulations of ferroelectrics domain structures in PbZrxTi1-xO3 bilayers
Domain stability and structures in Pb(Zr0.3Ti0.7)O3/Pb(Zr0.7Ti0.3)O3 bilayer films under different substrate strains are studied using the phase field method. It is demonstrated that the domain structure of the bilayer film is very different from those of the corresponding single layer films grown on the same silicon substrate with an incoherent interface. Moreover, the predicted rhombohedral domains in the Pb(Zr0.7Ti0.3)O3 layer of the bilayer film have smaller sizes than those in the single layer case. These results are compared with experimental observations and previous thermodynamic analyses. The polarization distributions of the ferroelectric-paraelectric bilayer are analyzed as a function of the thickness of the bilayer film, where there is a 'ferroelectric proximity effect' due to dipole-dipole interactions. The phase diagrams for both the bilayer and single layer films as a function of temperature and effective in-plane substrate strain are constructed.
Pressure and electric field effects on piezoelectric responses of KNbO3
The dielectric and piezoelectric properties of a KNbO3 single crystal under applied hydrostatic pressure and positive bias electric field are investigated using phenomenological Landau-Ginzburg-Devonshire (LGD) thermodynamic theory. It is shown that the hydrostatic pressure effect on the dielectric and piezoelectric properties is similar to temperature, suggesting a common underlying mechanism for the piezoelectric anisotropy and its enhancement. The stable phase diagram of KNbO3 as a function of temperature and positive bias electric field is constructed. The maximum piezoelectric coefficient d33o* varying with temperature and electric field is calculated.
Digitization Best Practices [Poster]
This project involved performing tests and documenting results to determine best practices for digitizing older print documents. The digitization process is complicated, especially when original documents exhibit non-standard fonts and are faded. Tests focused on solutions to improve high quality scanning, increase OCR accuracy, and efficiently use embedded metadata. Results are summarized. From the test results on the right sides, we know that when we plan to digitize documents, we should balance Quantity and Quality based on our expectation, and then make final decision for the digitization process.