Engineering topics
Xue, Fei
Publications and source records attributed to Xue, Fei.
Formation of Nitrogen Bubbles During Solidification of Duplex Stainless Steels
The nucleation and growth of nitrogen bubbles for duplex stainless steels are of great significance for the formation mechanism of bubbles during solidification. In the current study, numerical method and theoretical analysis of formula derivation were used to study the formation of nitrogen bubbles during solidification. The critical sizes of the bubble for homogeneous nucleation and heterogeneous nucleation at the solid–liquid interface during solidification were derived theoretically by the classical nucleation theory. The results show that the calculated values for the solubility of nitrogen in duplex stainless steel are in good agreement with the experimental values which are quoted by references: for example, when the temperature T = 1823 K and the nitrogen partial pressure P{sub N 2 =40P Θ , the calculated value (0.8042 wt pct) for the solubility of Fe-12Cr alloy nitrogen in molten steel is close to the experimental value (0.780 wt pct). Moreover, the critical radii for homogeneous nucleation and heterogeneous nucleation are identical during solidification. On the one hand, with the increasing temperature or the melt depth, the critical nucleation radius of bubbles at the solid–liquid interface increases, but the bubble growth rate decreases. On the other hand, with the decreasing initial content of nitrogen or the cooling rate, the critical nucleation radius of bubbles at the solid–liquid interface increases, but the bubble growth rate decreases. Furthermore, when the melt depth is greater than the critical depth, which is determined by the technological conditions, the change in the Gibbs free energy for the nucleation is not conducive enough to form new bubbles.
Linearly aligned single-chiral vortices in hexagonal manganites by in situ electric arc heating
Nanoscale topological defects, such as vortices and skyrmions in ferroic systems, have been intensively investigated due to their intriguing properties and behaviors. In addition to harnessing and tuning their functionalities, spatial manipulation and control of topological defects as functional elements are important for future nanotechnologies. Here in this paper, we report a linear alignment behavior of single-chiral vortices observed in thin transmission electron microscopy samples of multiferroic hexagonal manganites during an in situ heating experiment. In order to avoid chemical degradation during high-temperature heating in vacuum, we have utilized a rapid heating and quenching by in situ electric arcing. Using atomic resolution electron microscopy and phase-field simulation, we found that vortices and antivortices formed near the phase transition temperature are pulled out in the opposite directions by mechanical strain to leave single-chiral vortices linearly aligned along an isothermal line formed during quenching. In conclusion, Oour study provides important insight into spatial manipulation of the topological defects in oxide multiferroics by investigating far-equilibrium dynamics of symmetry-breaking continuous phase transitions.
Time-Reversal Symmetry-Breaking Nematic Insulators near Quantum Spin Hall Phase Transitions
We study the phase diagram of a model quantum spin Hall system as a function of band inversion and band-coupling strength, demonstrating that when band hybridization is weak, an interaction-induced nematic insulator state emerges over a wide range of band inversion. This property is a consequence of the long-range Coulomb interaction, which favors interband phase coherence that is weakly dependent on momentum and therefore frustrated by the single-particle Hamiltonian at the band inversion point. For weak band hybridization, interactions convert the continuous gap closing topological phase transition at inversion into a pair of continuous phase transitions bounding a state with broken time-reversal and rotational symmetries. At intermediate band hybridization, the topological phase transition proceeds instead via a quantum anomalous Hall insulator state, whereas at strong hybridization interactions play no role. We comment on the implications of our findings for InAs/GaSb and HgTe/CdTe quantum spin Hall systems.
The magnetic effects on the energetic landscape of Fe-Cu alloy: A model Hamiltonian approach
Using ab initio calculations and the magnetic cluster expansion formula, a model with the magnetic effects on the energetic landscape of Fe–Cu was developed. The (partially) disordered local moment picture and Monte Carlo simulation method were combined to study the magnetically disordering effects on the thermodynamic properties in Fe–Cu alloys. The simulation results show nonlinear enhancements of Fe magnetism with increasing Cu concentration under varying magnetic ordering/disordering states, and the nonlinearity of the enhancement is more significant under the ferromagnetic state. It is also found that magnetism has subtle effects on the clustering of Cu because both the substitutional and binding energies could be affected but in different ways depending on the magnetic states. The results suggest that the alloying-induced enhancement of the Fe magnetism is a fundamental feature of Fe–Cu, which introduces difference on the concentration dependence of mixing, depending on the magnetic ordering/disordering states. In conjunction with the concentration dependence of short-range ordering, the enhancement of Fe magnetism also strongly affects the Curie temperatures in Fe–Cu.
Configurable topological textures in strain graded ferroelectric nanoplates
Topological defects in matter behave collectively to form highly non-trivial structures called topological textures that are characterised by conserved quantities such as the winding number. Here we show that an epitaxial ferroelectric square nanoplate of bismuth ferrite subjected to a large strain gradient (as much as 10 5 m -1 ) associated with misfit strain relaxation enables five discrete levels for the ferroelectric topological invariant of the entire system because of its peculiar radial quadrant domain texture and its inherent domain wall chirality. The total winding number of the topological texture can be configured from-1 to 3 by selective non-local electric switching of the quadrant domains. By using angle-resolved piezoresponse force microscopy in conjunction with local winding number analysis, we directly identify the existence of vortices and anti-vortices, observe pair creation and annihilation and manipulate the net number of vortices. Our findings offer a useful concept for multi-level topological defect memory.
Theory of strain phase separation and strain spinodal: Applications to ferroelastic and ferroelectric systems
Not provided.
Giant Ferroelectric Polarization in Ultrathin Ferroelectrics via Boundary-Condition Engineering
Tailoring and enhancing the functional properties of materials at reduced dimension is critical for continuous advancement of modern electronic devices. Here, the discovery of local surface induced giant spontaneous polarization in ultrathin BiFeO 3 ferroelectric films is reported. Using aberration-corrected scanning transmission electron microscopy, it is found that the spontaneous polarization in a 2 nm-thick ultrathin BiFeO 3 film is abnormally increased up to ≈90–100 µC cm -2 in the out-of-plane direction and a peculiar rumpled nanodomain structure with very large variation in c/a ratios, which is analogous to morphotropic phase boundaries (MPBs), is formed. By a combination of density functional theory and phase-field calculations, it is shown that it is the unique single atomic Bi 2 O 3-x layer at the surface that leads to the enhanced polarization and appearance of the MPB-like nanodomain structure. This finding clearly demonstrates a novel route to the enhanced functional properties in the material system with reduced dimension via engineering the surface boundary conditions.
Thermodynamic potential and phase diagram for multiferroic bismuth ferrite (BiFeO 3 )
Here, we construct a Landau–Ginzburg thermodynamic potential, and the corresponding phase diagram for pristine and slightly doped bismuth ferrite, a ferroelectric antiferromagnet at room temperature. The potential is developed based on new X-ray and neutron diffraction experiments complementing available data. We demonstrate that a strong biquadratic antiferrodistortive-type coupling is the key to a quantitative description of Bi 1–x La x FeO 3 multiferroic phase diagram including the temperature stability of the antiferromagnetic, ferroelectric, and antiferrodistortive phases, as well as for the prediction of novel intermediate structural phases. Furthermore, we show that “rotomagnetic” antiferrodistortive–antiferromagnetic coupling is very important to describe the ferroelectric polarization and antiferrodistortive tilt behavior in the R3c phase of BiFeO 3 . The Landau–Ginzburg thermodynamic potential is able to describe the sequence of serial and trigger-type phase transitions, the temperature-dependent behavior of the order parameters, and the corresponding susceptibilities to external stimuli. It can also be employed to predict the corresponding ferroelectric and antiferrodistortive properties of Bi 1–x La x FeO 3 thin films and nanoparticles by incorporating the gradient and surface energy terms that are strongly dependent on the shape, size, and preparation method.
Stability of Polar Vortex Lattice in Ferroelectric Superlattices
A novel mesoscale state comprising of an ordered polar vortex lattice has been demonstrated in ferroelectric superlattices of PbTiO 3 /SrTiO 3 . In this study, we employ phase-field simulations, analytical theory, and experimental observations to evaluate thermodynamic conditions and geometric length scales that are critical for the formation of such exotic vortex states. We show that the stability of these vortex lattices involves an intimate competition between long-range electrostatic, long-range elastic, and short-range polarization gradient-related interactions leading to both an upper and a lower bound to the length scale at which these states can be observed. Finally, we found that the critical length is related to the intrinsic domain wall width, which could serve as a simple intuitive design rule for the discovery of novel ultrafine topological structures in ferroic systems.
Strain phase separation: Formation of ferroelastic domain structures
Phase decomposition is a well-known process leading to the formation of two-phase mixtures. Here we show that a strain imposed on a ferroelastic crystal promotes the formation of mixed phases and domains, i.e., strain phase separation with local strains determined by a common tangent construction on the free energy versus strain curves. It is demonstrated that a domain structure can be understood using the concepts of domain/phase rule, lever rule, and coherent and incoherent strain phase separation, in a complete analogy to phase decomposition. The proposed strain phase separation model is validated using phase-field simulations and experimental observations of PbTiO 3 and BiFeO 3 thin films as examples. Finally, the proposed model provides a simple tool to guide and design domain structures of ferroelastic systems.