Engineering Papers⌕ Search

Engineering topics

Xu, J

Publications and source records attributed to Xu, J.

42 records · Page 3

Superconducting accelerating structures for very low velocity ion beams.

This paper presents designs for four types of very-low-velocity superconducting (SC) accelerating cavity capable of providing several MV of accelerating potential per cavity, and suitable for particle velocities in the range 0.006<v/c<0.06. Superconducting TEM-class cavities have been widely applied to cw acceleration of ion beams. SC linacs can be formed as an array of independently phased cavities, enabling a variable velocity profile to maximize the output energy for each of a number of different ion species. Several laboratories in the U.S. and Europe are planning exotic beam facilities based on SC linacs. The cavity designs presented here are intended for the front end of such linacs, particularly for the postacceleration of rare isotopes of low charge state. Several types of SC cavities have been developed recently to cover particle velocities above 0.06c. Superconducting four-gap quarter-wave resonators for velocities 0.008<{beta}=v/c<0.05 were developed about two decades ago and have been successfully operated at the ATLAS SC linac at Argonne National Laboratory. Since that time, progress in simulation tools, cavity fabrication, and processing have increased SC cavity gradients by a factor of 3-4. This paper applies these tools to optimize the design of a four-gap quarter-wave resonator for exotic beam facilities and other low-velocity applications.

43 PARTICLE ACCELERATORS↗

A parallel 3D poisson solver for space charge simulation in cylindrical coordinates.

This paper presents the development of a parallel three-dimensional Poisson solver in cylindrical coordinate system for the electrostatic potential of a charged particle beam in a circular tube. The Poisson solver uses Fourier expansions in the longitudinal and azimuthal directions, and Spectral Element discretization in the radial direction. A Dirichlet boundary condition is used on the cylinder wall, a natural boundary condition is used on the cylinder axis and a Dirichlet or periodic boundary condition is used in the longitudinal direction. A parallel 2D domain decomposition was implemented in the (r,{theta}) plane. This solver was incorporated into the parallel code PTRACK for beam dynamics simulations. Detailed benchmark results for the parallel solver and a beam dynamics simulation in a high-intensity proton LINAC are presented. When the transverse beam size is small relative to the aperture of the accelerator line, using the Poisson solver in a Cartesian coordinate system and a Cylindrical coordinate system produced similar results. When the transverse beam size is large or beam center located off-axis, the result from Poisson solver in Cartesian coordinate system is not accurate because different boundary condition used. While using the new solver, we can apply circular boundary condition easily and accurately for beam dynamic simulations in accelerator devices.

43 PARTICLE ACCELERATORS↗

Dynamic Self-Assembly Induced Rapid Dissolution of Cellulose at Low Temperatures

Cellulose can be dissolved in precooled (-12 C) 7 wt % NaOH-12 wt % urea aqueous solution within 2 min. This interesting process, to our knowledge, represents the most rapid dissolution of native cellulose. The results from 13C NMR, 15N NMR, 1H NMR, FT-IR, small-angle neutron scattering (SANS), transmission electron microscopy (TEM), and wide-angle X-ray diffraction (WAXD) suggested that NaOH 'hydrates' could be more easily attracted to cellulose chains through the formation of new hydrogen-bonded networks at low temperatures, while the urea hydrates could not be associated directly with cellulose. However, the urea hydrates could possibly be self-assembled at the surface of the NaOH hydrogen-bonded cellulose to form an inclusion complex (IC), leading to the dissolution of cellulose. Scattering experiments, including dynamic and static light scattering, indicated that most cellulose molecules, with limited amounts of aggregation, could exist as extended rigid chains in dilute solution. Further, the cellulose solution was relatively unstable and could be very sensitive to temperature, polymer concentration, and storage time, leading to additional aggregations. TEM images and WAXD provided experimental evidence on the formation of a wormlike cellulose IC being surrounded with urea. Therefore, we propose that the cellulose dissolution at -12 C could arise as a result of a fast dynamic self-assembly process among solvent small molecules (NaOH, urea, and water) and the cellulose macromolecules.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗

A Simple Route to Highly Oriented and Ordered Nanoporous Block Copolymer Templates

Controlling the orientation and lateral ordering of the block copolymer microdomains is essential to their use as templates and scaffolds for the fabrication of nanostructured materials. In addition, a process must be robust, simple to implement, and rapid, and should not introduce disruptive processing steps that would impede their use. Here, we describe thin films of poly(styrene-b-4-vinylpyridine) (PS-b-P4VP) diblock copolymers, spin-coated from mixed solvents that show highly oriented, cylindrical microdomains with a high degree of order on a wide range of substrates, including silicon oxide, polystyrene, germanium, polyimide, and poly(butylene terephthalate). In addition, the preferential solvation of the P4VP block with an alcohol caused a surface reconstruction that resulted in the formation of a nanoporous film upon drying. The evaporation of gold onto the reconstructed films produced thermally stable and reactive ion etching resistant films.

36 MATERIALS SCIENCE↗