Engineering Papers⌕ Search

Engineering topics

Xu, J

Publications and source records attributed to Xu, J.

At least 37 records · Page 2

A design concept for a planar superconducting undulator for the APS.

A superconducting planar undulator is under development at the Advanced Photon Source. The R&D phase culminated in the successful testing of several short magnetic structure prototypes. Work is now focused on a complete design for the first undulator. The conceptual designs for its superconducting magnet, the cooling system, and the cryostat are described in this paper.

43 PARTICLE ACCELERATORS↗

Block Copolymer Self-assembly in Chemically Patterned Squares

The self-assembly of block copolymers thin films laterally confined within square geometries that are incompatible with the bulk packing symmetry of the block copolymer microdomains is investigated. The lateral confinement is provided by chemical patterns made by oxidation nanolithography of octadecyltrichlorosilane-coated silicon surfaces. We find that the size and shape of the confinement affect the order of the block copolymer microdomains and their packing symmetries. Specifically, if the size of the square pattern is smaller than the characteristic grain size the hexagonally packed microdomains form a single-crystal oriented along the edges of the pattern and with 'edge-boundaries' located preferentially at the perimeter of the pattern. If the size of the pattern is comparable with the natural bulk period of the copolymer, the packing symmetry changes from hexagonal to square. In this case the ordering induced by the pattern edges becomes dominant allowing the square lattice to be more stable than the hexagonal one.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Scalable direct Vlasov solver with discontinuous Galerkin method on unstructured mesh.

This paper presents the development of parallel direct Vlasov solvers with discontinuous Galerkin (DG) method for beam and plasma simulations in four dimensions. Both physical and velocity spaces are in two dimesions (2P2V) with unstructured mesh. Contrary to the standard particle-in-cell (PIC) approach for kinetic space plasma simulations, i.e., solving Vlasov-Maxwell equations, direct method has been used in this paper. There are several benefits to solving a Vlasov equation directly, such as avoiding noise associated with a finite number of particles and the capability to capture fine structure in the plasma. The most challanging part of a direct Vlasov solver comes from higher dimensions, as the computational cost increases as N{sup 2d}, where d is the dimension of the physical space. Recently, due to the fast development of supercomputers, the possibility has become more realistic. Many efforts have been made to solve Vlasov equations in low dimensions before; now more interest has focused on higher dimensions. Different numerical methods have been tried so far, such as the finite difference method, Fourier Spectral method, finite volume method, and spectral element method. This paper is based on our previous efforts to use the DG method. The DG method has been proven to be very successful in solving Maxwell equations, and this paper is our first effort in applying the DG method to Vlasov equations. DG has shown several advantages, such as local mass matrix, strong stability, and easy parallelization. These are particularly suitable for Vlasov equations. Domain decomposition in high dimensions has been used for parallelization; these include a highly scalable parallel two-dimensional Poisson solver. Benchmark results have been shown and simulation results will be reported.

99 GENERAL AND MISCELLANEOUS↗

Large volume high-pressure cell with supported moissanite anvils

The recently developed moissanite anvil cell (MAC) has become a useful device for achieving both high-pressure and large sample volume in an anvil cell. We describe two improvements in the basic design of the MAC. First, the loading environment has been optimized by centering the load. Second, a variety of supported systems have been examined to provide anvil stability at high loads with large anvils. Sample volumes that are nearly three orders magnitude greater than allowed by conventional diamond anvil cells can be pressurized and characterized at {approx}50 GPa.

47 OTHER INSTRUMENTATION↗

Geometry- and size-dependence of electrical properties of metal contacts on semiconducting nanowires.

We report on a theoretical study of the geometry-and size-dependent effects of metal-semiconductor contacts to understand the origins of significant contact effects on nanowire (NW) devices. The difference in metal-semiconductor barrier width and height for a planar and NW device is calculated based on the differences in depletion-layer width and image-force barrier-lowering effects. We calculate the ratio of the specific contact resistance of a NW contact to that of a planar contact assuming the two systems have been made of the same material set. Using a modified cylindrical transmission line model, we compare the effects of contacts in the two systems and discuss the reasons for larger contact effects in NW devices. The study suggests that the formation of a higher doping concentration in the contact regions is essential for better NW transistors.

24 POWER TRANSMISSION AND DISTRIBUTION↗

Direct Vlasov solvers with high-order spectral element method.

This paper presents the development of parallel direct Vlasov solvers using the Spectral Element Method (SEM). Instead of the standard Particle-In-Cell (PIC) approach for kinetic space plasma simulation, i.e. solving the Vlasov-Maxwell equations, the direct method has been used in this paper. There are several benefits to solve the Vlasov equation directly, such as avoiding noise associated with the finite number of particles and the capability to capture the fine structure in the plasma, etc. The most challenging part of direct Vlasov solver comes from high dimension, as the computational cost increases as N{sup 2d}, where d is the dimension of the physical space. Recently due to fast development of supercomputers, the possibility of high dimensions becomes more realistic. A significant effort has been devoted to solve the Vlasov equation in low dimensions so far, now more interests focus on higher dimensions. Different numerical methods have been tried so far, such as finite difference method, Fourier spectral method, finite volume method, etc. In this paper SEM has been successfully applied to construct these solvers. SEM has shown several advantages, such as easy interpolation due to local element structure and long time integration due to its high order accuracy. Domain decomposition in high dimensions have been used for parallelization, these include scalable parallel 1D and 2D Poisson solvers. Benchmark results have been shown and simulation results have been reported for two different cases: one dimension (1P1V), and two dimensions (2P2V) in both physical and velocity spaces.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗

Protein structure prediction enhanced with evolutionary diversity : SPEED.

For naturally occurring proteins, similar sequence implies similar structure. Consequently, multiple sequence alignments (MSAs) often are used in template-based modeling of protein structure and have been incorporated into fragment-based assembly methods. Our previous homology-free structure prediction study introduced an algorithm that mimics the folding pathway by coupling the formation of secondary and tertiary structure. Moves in the Monte Carlo procedure involve only a change in a single pair of {phi},{psi} backbone dihedral angles that are obtained from a Protein Data Bank-based distribution appropriate for each amino acid, conditional on the type and conformation of the flanking residues. We improve this method by using MSAs to enrich the sampling distribution, but in a manner that does not require structural knowledge of any protein sequence (i.e., not homologous fragment insertion). In combination with other tools, including clustering and refinement, the accuracies of the predicted secondary and tertiary structures are substantially improved and a global and position-resolved measure of confidence is introduced for the accuracy of the predictions. Performance of the method in the Critical Assessment of Structure Prediction (CASP8) is discussed.

59 BASIC BIOLOGICAL SCIENCES↗

Memory effect of a single-walled carbon nanotube on nitride-oxide structure under various bias conditions.

We report on the memory effect of single-walled carbon nanotubes (SWNTs) placed on a nitride-oxide layer structure designed as a charge storage medium. The conductance of the SWNT was modulated by the injected charge in the nitride-oxide interface and the polarities of injected charges were then detected. A large on/off-state current ratio (>10{sup 4}) was obtained at a small program/erase voltage range (<3 V). We also studied the effect of a half-selected cell on the conductance of the SWNTs to identify the issues with cross-point memory architecture.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Atomistic Simulation of Lignocellulosic Biomass and Associated Cellulosomal Protein Complexes

Computer simulations have been performed to obtain an atomic-level understanding of lignocellulose structure and the assembly of its associated cellulosomal protein complexes. First, a CHARMM molecular mechanics force field for lignin is derived and validated by performing a molecular dynamics simulation of a crystal of a lignin fragment molecule and comparing simulation-derived structural features with experimental results. Together with the existing force field for polysaccharides, this work provides the basis for full simulations of lignocellulose. Second, the underlying molecular mechanism governing the assembly of various cellulosomal modules is investigated by performing a novel free-energy calculation of the cohesin-dockerin dissociation. Our calculation indicates a free-energy barrier of ~17 kcal/mol and further reveals a stepwise dissociation pathway involving both the central -sheet interface and its adjacent solvent-exposed loop/turn regions clustered at both ends of the -barrel structure.

09 BIOMASS FUELS↗

Isothermal Crystallization of Poly(L-lactide) Induced by Graphene Nanosheets and Carbon Nanotubes: A Comparative Study

Low-dimensional nanoparticles have a strong ability to induce the crystallization of polymer matrices. One-dimensional carbon nanotubes (CNTs) and two-dimensional graphene nanosheets (GNSs), both of which are both carbon-based nanoparticles, provide a good opportunity to investigate the effects of differently dimensional nanoparticles on the crystallization behavior of a polymer. For this purpose, respective nanocomposites of CNTs and GNSs with poly(L-lactide) (PLLA) as matrix were prepared by solution coagulation. Time-resolved Fourier-transform infrared spectroscopy (FTIR) and synchrotron wide-angle X-ray diffraction (WAXD) were performed to probe chain conformational changes and to determine the crystallization kinetics during the isothermal crystallization of the PLLA nanocomposites and neat PLLA, especially in the early stages. Both CNTs and GNSs could serve as nucleating agents in accelerating the crystallization kinetics of PLLA; however, the ability of CNTs to induce crystallization was stronger than that of GNSs. On increasing the content of CNTs from 0.05 to 0.1 wt %, the induction period was shortened and the crystallization rate was enhanced, but the reverse situation was found for GNSs nanocomposites. In the case of neat PLLA, -CH{sub 3} interchain interactions preceded -(COC + CH{sub 3}) interchain interactions during the crystallization. Conversely, in the CNTs and GNSs nanocomposites, the conformational ordering began with -(COC + CH{sub 3}) interchain interactions, which resulted directly in a reduced induction period. Interchain interactions of this type could be explained in terms of surface-induced conformational order (SICO). Finally, the effect of the dimensionality of the nanoparticles on the crystallization behavior of PLLA is discussed.

77 NANOSCIENCE AND NANOTECHNOLOGY↗

Geometric stabilization of extended S=2 vortices in two-dimensional photonic lattices: Theoretical analysis, numerical computation, and experimental results

In this work, we focus on the subject of nonlinear discrete self-trapping of S=2 (doubly-charged) vortices in two-dimensional photonic lattices, including theoretical analysis, numerical computation, and experimental demonstration. We revisit earlier findings about S=2 vortices with a discrete model and find that S=2 vortices extended over eight lattice sites can indeed be stable (or only weakly unstable) under certain conditions, not only for the cubic nonlinearity previously used, but also for a saturable nonlinearity more relevant to our experiment with a biased photorefractive nonlinear crystal. We then use the discrete analysis as a guide toward numerically identifying stable (and unstable) vortex solutions in a more realistic continuum model with a periodic potential. Finally, we present our experimental observation of such geometrically extended S=2 vortex solitons in optically induced lattices under both self-focusing and self-defocusing nonlinearities and show clearly that the S=2 vortex singularities are preserved during nonlinear propagation.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Lateral Ordering of Cylindrical Microdomains Under Solvent Vapor

The development of the morphology in asymmetric polystyrene-block-poly(4-vinylpyridine) (PSb- P4VP) thin films in tetrahydrofuran (THF) vapor, a selective solvent for majority PS block, as a function of time was investigated by scanning force microscopy (SFM) and grazing incidence small-angle X-ray scattering (GISAXS). When the PS-b-P4VP films were spin-coated from a toluene/THF mixture onto a silicon substrate, cylindrical microdomains were found to be oriented normal to the surface. By annealing under the THF solvent vapor, the distribution of the size and center-to-center distance between the cylindrical microdomains were significantly narrowed. The orientation and grain size of the cylindrical microdomains in the annealed films were characterized using Moire´ analysis obtained from SFM scan. GISAXS was used to characterize the morphology of the entire film.

74 ATOMIC AND MOLECULAR PHYSICS↗

Lateral Ordering of Cylindrical Microdomains Under Solvent Vapor

The development of the morphology in asymmetric polystyrene-block-poly(4-vinylpyridine) (PS-b-P4VP) thin films in tetrahydrofuran (THF) vapor, a selective solvent for majority PS block, as a function of time was investigated by scanning force microscopy (SFM) and grazing incidence small-angle X-ray scattering (GISAXS). When the PS-b-P4VP films were spin-coated from a toluene/THF mixture onto a silicon substrate, cylindrical microdomains were found to be oriented normal to the surface. By annealing under the THF solvent vapor, the distribution of the size and center-to-center distance between the cylindrical microdomains were significantly narrowed. The orientation and grain size of the cylindrical microdomains in the annealed films were characterized using Moire analysis obtained from SFM scan. GISAXS was used to characterize the morphology of the entire film.

59 BASIC BIOLOGICAL SCIENCES↗

A new ATLAS efficiency and intensity upgrade project.

The ATLAS facility provides beams of essentially all stable isotopes at energies above the Coulomb barrier for nuclear physics research. We have developed a two-stage ATLAS upgrade plan which includes the replacement of aging split-ring cavities by high-performance quarter-wave resonators (QWR) capable of accelerating {approx}100 p{mu}A ion beams. The first stage of the upgrade project funded through the American Recovery and Reinvestment Act includes accelerator efficiency increase by adding a new RFQ injector, development and construction of a new cryomodule containing up to 3 SC solenoids and 8 QWRs. A new 72.75 MHz resonator is designed for an optimum ion velocity {beta} = 0.075. To achieve record high accelerating voltage {approx}2.5 MV at this very low velocity range, EM properties of the resonator are highly optimized to reduce peak surface fields. The resonator will be equipped with a piezoelectric fast tuner and capacitive coupler to transmit several kilowatts of RF power. The vast experience gained during the development, commissioning and operation of the ATLAS energy upgrade cryomodule [1] will be applied for the design of the new cryomodule.

43 PARTICLE ACCELERATORS↗

High pressure structural and elastic properties of NiO up to 67 GPa

Using argon as the pressure medium, the structural and elastic properties of NiO have been investigated up to 67 GPa by the in situ synchrotron x-ray diffraction in a diamond anvil cell. Up to 67 GPa, NiO remains in the rhombohedral distorted rocksalt structure without phase transition. The lattice parameters of a and c, indexed in the hexagonal lattice, were found to decrease monotonically with increasing pressure, while the c/a ratio remains almost constant. The elastic properties of NiO were studied by analyzing the linewidth of various diffraction perks, which indicates that the factor S = (S{sub 11} - S{sub 12} - S{sub 44}/2) is negative although the single-crystal elastic compliances S{sub 11} is positive, respectively, in the investigated pressure range.

36 MATERIALS SCIENCE↗

Reduction in threading dislocation densities in AlN epilayer by introducing a pulsed atomic-layer epitaxial buffer layer

A method of reducing threading dislocation (TD) density in AlN epilayers grown on sapphire substrate is reported. By introducing an AlN buffer layer grown by a pulsed atomic-layer epitaxy method, TDs in epitaxial AlN films were greatly decreased. From transmission electron microscopic images, a clear subinterface was observed between the buffer layer and the subsequently continuous grown AlN epilayer. In the vicinity of the subinterface, the redirection, annihilation, and termination of TDs were observed. The increase in lateral growth rate accounted for TD redirection and annihilation in the AlN epilayer. Strain variation between the two regions resulted in the termination of TDs owing to the dislocation line energy minimization.

36 MATERIALS SCIENCE↗

A simple biphasic route to water soluble dithiocarbamate functionalized quantum dots

Hydrophobic trioctylphosphine oxide-functionalized CdSe quantum dots (CdSe-TOPO QDs) were transferred from organic solvent to aqueous solution via a simple yet novel biphasic ligand exchange process in one step, which involved the in-situ formation of hydrophilic dithiocarbamate moieties and subsequent ligand exchange with TOPO at the chloroform/water interface. The resulting water dispersible, dithiocarbamate functionalized CdSe QDs (i.e., D-CdSe) exhibited an increased photoluminescence (PL) quantum yield as compared to the original CdSe-TOPO QDs, suggesting an effective passivation of dithiocarbamate ligands on the QD surface. The D-CdSe QDs were then mixed with hydroxyl terminated TiO{sub 2} nanoparticles. A decrease in the PL of the mixture was observed, indicating a possible charge transfer from the D-CdSe QDs to the TiO{sub 2} nanoparticles. The reaction of the carboxyl group on the D-CdSe surface with the hydroxyl group on the TiO{sub 2} rendered QDs in direct contact with TiO{sub 2}, thereby facilitating the electronic interaction between them.

36 MATERIALS SCIENCE↗

Evaluation of Simplified Methods for Estimating Shear Capacity Using JNES/INUEC Low-Rise Concrete Shear Wall Cyclic Test Data

The simplified methods in current codes for determining the shear capacity of reinforced concrete shear walls had mostly been validated using the test results of single-element shear walls. Recently available JNES/NUPEC test data of reinforced concrete shear walls under multi-directional cyclic loadings provided a unique opportunity to investigate the adequacy of the simplified methods for use in situations with strong interaction effects. A total of 11 test specimens with aspect ratios between 0.47 and 0.87 have been used in the assessment. Two simplified methods from the ACI 349-01 standard [1] and one from the ASCE 43-05 standard [2] have been evaluated. This paper also presents the development of an adjustment factor to consider the aspect ratio and the development of two approaches to consider interaction effects for one of the simplified methods. It concludes with the insights on the applicability of the code methods when interaction effects exist.

36 MATERIALS SCIENCE↗