Engineering Papers⌕ Search

Engineering topics

Wu, Hui

Publications and source records attributed to Wu, Hui.

31 records · Page 2
All sourcesNASA NTRSDOE OSTI
DOE OSTI2020

Characterization of flow and transport in a fracture network at the EGS Collab field experiment through stochastic modeling of tracer recovery

Energy extraction from subsurface reservoirs is important for addressing the increasing energy demand and environmental concerns such as global warming. However, the characterization of subsurface reservoirs, particularly reservoirs dominated by fracture networks remains a challenge due to the lack of means to directly observe subsurface processes. This study explores the feasibility and efficacy of characterizing fracture flow and transport processes in an enhanced geothermal system (EGS) testbed through stochastic tracer modeling. There are two enabling factors that allow application of stochastic modeling to characterize a subsurface reservoir. First, an abundance of geological and geophysical measurements enables the development of a high-fidelity and well-constrained fracture network model. Second, high-performance computing (HPC) allows running massive realizations efficiently. Six conservative tracer tests were stochastically modeled and produced satisfactory realizations that successfully reproduce field tracer recovery data from each tracer test. The evolution of flow and transport processes in the fracture network was then analyzed from these satisfactory realizations. This work demonstrates that stochastic tracer modeling on a high-fidelity fracture network model is feasible and can provide important insights regarding flow and transport characteristics in subsurface fractured reservoirs.

58 GEOSCIENCES↗
DOE OSTI2020

Molten Lithium-Brass/Zinc Chloride System as High-Performance and Low-Cost Battery

Batteries with high safety, low cost, and reasonable energy density are essential for grid-scale energy storage and still remain elusive. In this paper, we report a solid electrolyte-based liquid lithium-brass/zinc chloride (SELL-brass/ZnCl 2 ) battery using garnet-type lithium-ion solid electrolyte, lithium anode, and brass/ZnCl 2 cathode. The chemistry of the cell reaction and the ability of being assembled in discharged state ensures a high safety. The use of low-cost ZnCl 2 cathode can realize a low cell material cost of $16 kWh –1 . The adoption of lithium anode guarantees a high theoretical energy density of 750 Wh kg –1 and 2,250 Wh L –1 . Moreover, by using brass powder as a Zn source in the cathode, the Zn particle growth issue is successfully solved, and a good cycling stability of the battery can be obtained. As full cell performance and scalability are also verified, our SELL-brass/ZnCl 2 battery shows a high potential for practical use in grid energy storage.

25 ENERGY STORAGE↗
DOE OSTI2020

A Garnet-Type Solid-Electrolyte-Based Molten Lithium–Molybdenum–Iron(II) Chloride Battery with Advanced Reaction Mechanism

Solid-electrolyte-based molten-metal batteries have attracted considerable attention for grid-scale energy storage. Although ZEBRA batteries are considered one of the promising candidates, they still have the potential concern of metal particle growth and ion exchange with the β”-Al 2 O 3 electrolyte. Herein, a Li 6.4 La 3 Zr 1.4 Ta 0.6 O 12 solid-electrolyte-based molten lithium–molybdenum–iron(II) chloride battery (denoted as Li–Mo–FeCl 2 ) operated at temperature of 250 °C, comprising a mixture of Fe and LiCl cathode materials, a Li anode, a garnet-type Li-ion ceramic electrolyte, and Mo additive, is designed to overcome these obstacles. Different from conventional battery reaction mechanisms, this battery revolutionarily synchronizes the reversible Fe–Mo alloying–dealloying reactions with the delithiation–lithiation processes, meaning that the porous Mo framework derived from Fe–Mo alloy simultaneously suppresses the growth of pure Fe particles. By adopting a Li anode and a Li-ion ceramic electrolyte, the corrosion problem between the cathode and the solid electrolyte is overcome. With similar battery cost ($12 kWh –1 ), the theoretical energy density of Li–Mo–FeCl 2 battery surpasses that of a Na–FeCl 2 ZEBRA battery over 25%, to 576 Wh kg –1 and 2216 Wh L –1 , respectively. Experimental results further prove this cell has excellent cycling performance (472 mAh g LiCl –1 after 300 cycles, 50 mg active material) and strong tolerance against the overcharge–overdischarge (3–1.6 V) and freezing–thawing (25–250 °C) incidents.

36 MATERIALS SCIENCE↗
DOE OSTI2020

High-purity electrolytic lithium obtained from low-purity sources using solid electrolyte

Lithium (Li) is an important resource for the sustainability of socioeconomic systems given its wide use in various industrial applications. The industrial production of Li metals relies on the electrolysis of a mixture consisting of high-purity lithium chloride (LiCl) and potassium chloride. However, the purification of LiCl is expensive and unsustainable, requiring a substantial amount of energy and the use of noxious chemical reagents, so that producing high-purity Li efficiently and sustainably is a challenge. In this paper we report a new method of producing high-purity electrolytic Li from low-purity LiCl using solid-state electrolyte. Taking advantage of the high Li-ion selectivity of the solid electrolyte, we directly obtained high-purity metallic Li through the electrolysis of low-purity LiCl. Our new method provides two important advantages over conventional methods: (1) the cost of producing high-purity Li is reduced by using low-purity LiCl from low-grade brine, and the simpler purification process reduces the use of energy and chemical reagents; and (2) the operating temperature of the electrolytic process decreases from 400 °C to 240 °C, leading to an additional reduction in energy use.

36 MATERIALS SCIENCE↗
DOE OSTI2019

Structural and Reorientational Dynamics of Tetrahydroborate (BH4-) and Tetrahydrofuran (THF) in a Mg(BH4)2 3THF Adduct: Neutron-Scattering Characterization

Metal borohydrides are considered promising materials for hydrogen storage applications due to their high volumetric and gravimetric hydrogen density. Recently, different Lewis bases have been complexed with Mg(BH4)2 in efforts to improve hydrogenation/dehydrogenation properties. Notably, Mg(BH4)2 xTHF adducts involving tetrahydrofuran (THF; C4H8O) have proven to be especially interesting. This work focuses on exploring the physicochemical properties of the THF-rich Mg(BH4)2 3THF adduct using neutron-scattering methods and molecular DFT calculations. Structural analysis, based on neutron diffraction measurements of Mg(11BH4)2 3TDF (D-deuterium), has confirmed a lowering of the symmetry upon cooling, from monoclinic C2/c to P[1 with combining macron] via a triclinic distortion. Vibrational properties are strongly influenced by the THF environment, showing a splitting in spectral features as a result of changes in the bond lengths, force constants, and lowering of the overall symmetry. Interestingly, the orientational mobilities of the BH4- anions obtained from quasielastic neutron scattering (QENS) are not particularly sensitive to the presence of THF and compare well with the mobilities of BH4- anions in unsolvated Mg(BH4)2. The QENS data point to uniaxial 180 degree jump reorientations of the BH4- anions around a preferred C2 anion symmetry axis. The THF rings are also found to be orientationally mobile, undergoing 180 degree reorientational jumps around their C2 molecular symmetry axis with jump frequencies about an order of magnitude lower than those for the BH4- anions. In contrast, no dynamical behavior of the THF rings is observed with QENS for a more THF-deficient 2Mg(BH4)2 THF adduct. This lack of comparable THF mobility may reflect a stronger Mg2+-THF bonding interaction for lower THF/Mg(BH4)2 stoichiometric ratios, which is consistent with DFT calculations showing a decrease in the binding energy with each additional THF ring in the adduct. Based on the combined experimental and computational results, we propose that combining THF and Mg(BH4)2 is beneficial to (i) preventing weakly bound THF from coming free from the Mg2+ cation and reducing the concentration of any unwanted impurity in the hydrogen and (ii) disrupting the stability of the crystalline phase, leading to a lower melting point and enhanced kinetics for any potential hydrogen storage applications.

36 MATERIALS SCIENCE↗
DOE OSTI2019

High-Energy-Density Solid-Electrolyte-Based Liquid Li-S and Li-Se Batteries

Lithium-sulfur (Li-S) and Lithium-selenium (Li-Se) batteries are considered as promising candidates for next-generation battery technologies, as they have high energy density and low cost. However, due to the use of a solid Li-metal anode and a liquid organic electrolyte, the current Li-S and Li-Se batteries face several issues in terms of Coulombic efficiency and cycling stability, which seriously impeded their development. Here, we report solid-electrolyte-based liquid Li-S and Li-Se (SELL-S and SELL-Se in short) batteries. The batteries use a Li 6.4 La 3 Zr 1.4 Ta 0.6 O 12 (LLZTO) ceramic tube as electrolyte and work at temperatures higher than the melting point of Li; thus, polysulfide or polyselenide shuttle effects and Li dendrite growth are effectively prevented, and high energy density, together with high stability, fast charge/discharge capability, high Coulombic efficiency, and high energy efficiency, can be achieved. The SELL-S and SELL-Se batteries provide broader platforms for constructing high-energy, high-power, long-lifetime, and low-cost energy storage.

25 ENERGY STORAGE↗
DOE OSTI2019

ICAT: A numerical scheme to minimize numerical diffusion in advection-dispersion modeling and its application in identifying flow channeling

The advection-dispersion equation for scalar transport is essential for the numerical modeling of many fluid dynamics problems. However, solutions from numerical schemes always suffer from numerical diffusion and/or oscillation. In this study, we develop an Intra-Cell Advection Tracking (ICAT) scheme to minimize numerical diffusion and preserve monotonicity for advection-dispersion modeling. The key idea is to introduce “queues” in each discretized cell, and using a sequential transport rule and a flow distribution mechanism to track the scalar transport in these queues temporally and spatially. The capability and limitations of ICAT are first investigated through three test cases. Compared with the results obtained from other numerical schemes, the results from ICAT show substantially reduced numerical diffusion and agree better with analytical solutions. We also employ ICAT to simulate the transport process of a conservative tracer in a fracture with a highly heterogeneous aperture distribution. We report discrete flow channels in the fracture are better discerned by ICAT than by other numerical schemes, indicating the suitability of ICAT for modeling tracer transport in channelized flow fields.

15 GEOTHERMAL ENERGY↗
DOE OSTI2019

Low-Temperature Rotational Tunneling of Tetrahydroborate Anions in Lithium Benzimidazolate-Borohydride Li 2 (bIm)BH 4

To investigate the dynamical properties of the novel hybrid compound, lithium benzimidazolate-borohydride Li 2 (bIm)BH 4 (where bIm denotes a benzimidazolate anion, C 7 N 2 H 5 - ), we have used a set of complementary techniques: neutron powder diffraction, ab initio density functional theory calculations, neutron vibrational spectroscopy, nuclear magnetic resonance, neutron spin echo, and quasi-elastic neutron scattering. Our measurements performed over the temperature range from 1.5 to 385 K have revealed the exceptionally fast low-temperature reorientational motion of BH 4 - anions. This motion is facilitated by the unusual coordination of tetrahedral BH 4 - anions in Li2(bIm)BH4: each anion has one of its H atoms anchored within a nearly square hollow formed by four coplanar Li+ cations, while the remaining -BH 3 fragment extends into a relatively open space, being only loosely coordinated to other atoms. As a result, the energy barriers for reorientations of this fragment around the anchored B-H bond axis are very small, and at low temperatures, this motion can be described as rotational tunneling. The tunnel splitting derived from the neutron spin echo measurements at 3.6 K is 0.43(2) ueV. With increasing temperature, we have observed a gradual transition from the regime of low-temperature quantum dynamics to the regime of classical thermally activated jump reorientations. The jump rate of the uniaxial 3-fold reorientations reaches 5 x 10 11 s -1 at 80 K. Nearer room temperature and above, both nuclear magnetic resonance and quasi-elastic neutron scattering measurements have revealed the second process of BH4- reorientations characterized by the activation energy of 261 meV. This process is several orders of magnitude slower than the uniaxial 3-fold reorientations; the corresponding jump rate reaches ~7 x 10 8 s -1 at 300 K.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2019

A molten battery consisting of Li metal anode, AlCl3-LiCl cathode and solid electrolyte

High performance rechargeable batteries are crucially needed to address the demands of grid-scale stationary energy storage. High temperature battery systems, such as Na-S battery, Na-NiCl2 battery (ZEBRA battery) and liquid metal electrode (LME) battery, exhibit advantages like high power density and high cyclic stability, but also suffer from the high operating temperature. We recently invented new concept of molten lithium metal batteries, consisting of liquid lithium anodes, alloy (Sn, Bi, Pb) liquid cathodes and lithium ion conductor as solid electrolytes. Here we demonstrate a molten metal chloride battery that operates at a relatively low temperature of 210 °C. The battery has been designed to include molten (AlCl3-LiCl) cathode, solid electrolyte (garnet-type Li6.4La3Ta0.6Zr1.4O12 (LLZTO) ceramic tube) and molten lithium anode. The assembled AlCl3-LiCl||LLZTO||Li full cell has an average discharge voltage of 1.55 V and energy efficiency of 83% and has been successfully cycled for 100 cycles (800 h) without capacity fade. The theoretical specific energy of cell is 350 Wh/kg and the estimated cost is $11.6/kWh based on the weight of electrode materials. Considering the high performance, high safety, low operating temperature and low cost of raw materials, this novel type of molten-electrode battery system opens up new opportunities for stationary energy storage.

25 ENERGY STORAGE↗
DOE OSTI2019

Effects of Holding Time on the Sintering of Cemented Tungsten Carbide Powder and Bonding with High-Strength Steel Wire

Cemented tungsten carbide (WC-10Co) and high-strength (AISI 4340) steel were successfully bonded by hot compaction diffusion bonding at a low temperature. The effects of holding time (5-50 min) on microstructure and mechanical properties of the sintered carbides and bonding strengths of the dissimilar bilayered composite materials were examined. The results show that the mechanical properties of the carbides increase, but the bonding strength increases firstly and then decreases with the increase in holding time. The maximum density and hardness achieved are 95.92 and 99.5%, respectively. A transitional layer forms at the interface as a result of elemental interdiffusion. The depth of the layer increases with the increase in holding time. The optimal bonding time is determined to be 40 min at a temperature of 1200°C and a pressure 160 MPa, by which the maximum bonding strength of 204 MPa of the WC-10Co/4340 steel joints can be achieved.

36 MATERIALS SCIENCE↗