Engineering topics

Williams, G.

Publications and source records attributed to Williams, G..

At least 19 records

NASA NTRS2001

Cryogenic (70K) measurement of an all-composite 2-meter diameter mirror

The Herschel Space observatory (formerly known as FIRST) consists of a 3.5 m space telescope. In order to develop lightweight telescope technology suitable for this mission, COI designed and fabricated aspherical, f/1 2 m aperture prototype primary mirror using solely carbon fiber reinforced polypmer (CFR) materials. To assess the performance of this technology, optical metrology of the mirror surface was performed from ambient to an intended operational temperature for IR-telescopes of 70K. Testing was performed horizontally in a cryogenic vacuum chamber at Arnold Engineering Development Center (AEDC), Tennessee.

lightweight mirrors cryogenic testing composite ma↗

NASA NTRS1999

Containerless, Low-Gravity Undercooling of Ti-Ce Alloys in the MSFC Drop Tube

Previous tests of the classical nucleation theory as applied to liquid-liquid gap miscibility systems found a discrepancy between experiment and theory in the ability to undercool one of the liquids before the L1-L2 separation occurs. To model the initial separation process in a two-phase liquid mixture, different theoretical approaches, such as free-energy gradient and density gradient theories, have been put forth. If there is a large enough interaction between the critical liquid and the crucible, both models predict a wetting temperature (T(sub w)) above which the minority liquid perfectly wets and layers the crucible interface, but only on one side of the immiscibility dome. Materials with compositions on the other side of the dome will have simple surface adsorption by the minority liquid before bulk separation occurs when the coexistence (i.e., binoidal) line in reached. If the interaction between the critical liquid and the crucible were to decrease, T(sub w) would increase, eventually approaching the critical consolute temperature (T(sub cc)). If this situation occurs, then there could be large regions of the miscibility gap where non-perfect wetting conditions prevail resulting in droplets of L1 liquid at the surface having a non-zero contact angle. The resulting bulk structure will then depend on what happens on the surface and the subsequent processing conditions. In the past several decades, many experiments in space have been performed on liquid metal binary immiscible systems for the purpose of determining the effects that different crucibles may have on the wetting and separation process of the liquids. Potard performed experiments that showed different crucible materials could cause the majority phase to preferentially wet the container and thus produce a dispersed microstructure of the minority phase. Several other studies have been performed on immiscibles in a semi-container environment using an emulsion technique. Only one previous study was performed using completely containerless processing of immiscible metals and the results of that investigation are similar to some of the emulsion studies. In all the studies, surface wetting was attributed as the cause for the similar microstructures or the asymmetry in the ability to undercool the liquid below the binoidal on one side of the immiscibility dome. By removing the container completely from the separation process, it was proposed that the loss of the crucible/liquid interaction would produce a large shift in T(sub w) and thus change the wetting characteristics at the surface. By investigating various compositions across the miscibility gap, a change in the type and amount of liquid wetting at the surface of a containerless droplet should change the surface nucleating behavior of the droplet - whether it be the liquid-liquid wetting or the liquid-to-solid transition. Undercooling of the liquid into the metastable region should produce significant differences in the separation process and the microstructure upon solidification. In this study, we attempt to measure these transitions by monitoring the temperature of the sample by optical pyrometry. Microstructural analysis will be made to correlate with the degree of undercooling and the separation mechanisms involved.

Robinson, M. B.↗

NASA NTRS1999

Direct Determination of the Metastable Liquid Miscibility Gap in Undercooled Cu-Co Alloys

Bulk Cu-Co alloys at compositions ranging from 10 to 80 wt pct Co were highly undercooled using a melt fluxing technique. The metastable liquid separation boundary has been directly determined from the measured temperature-time profiles. It was found that the critical point of the miscibility gap is slightly shifted towards the Co side and about 90 K below the liquidus. A droplet-shaped microstructure was observed for all solidified specimens (Cu- 10 to 80 wt pct Co), when the melts were undercooled into the metastable miscibility boundary.

Li, D.↗

NASA NTRS1998

Results of the STRV-2 Lasercom Terminal Evaluation Tests

The STRV-2 lasercom terminal (LCT) was designed and developed by AstroTerra Corporation of San Diego, California, under funding from the Ballistic Missile Defense Organization (BMDO). Scheduled for launch in late 1998 it will be used to demonstrate, for the first time, high data rate bi-directional satellite-to-ground optical communications.

space optical communications STRV-2 lasercom testi↗

NASA NTRS1998

Metastable Demixing of Supercooled Cu-Co and Cu-Fe Alloys in an Oxide Flux

A systematic study on the liquid separation in supercooled Cu-Co and Cu-Fe alloys was performed using a melt fluxing which permits high supercooling to be achieved. Moreover, this method renders it possible to directly measure binodal temperatures and establish metastable liquid miscibility gap (LMG). All phase-separated samples at compositions ranging from 10 to 80 wt pct Co or to 83 wt pct Fe were found to exhibit droplet-shaped morphologies, in spite of various droplet distributions. Uniformly dispersed microstructures were obtained as the minority component was less than 20 vol.%; while beyond this percentage, serious coarsening was brought about. Calculations of the miscibility gap in the Cu-Co system and Stokes movement velocity of Co and Fe droplets in Cu matrix were made to analyze the experimental results.

Li, D.↗

NASA NTRS1998

Liquidus Temperatures and Solidification Behavior in the Copper-Niobium System

The copper-niobium phase diagram has been under active debate; thus, a corroboratory experimental study is needed. In this investigation, the melts of Cu-Nb alloys at compositions ranging from 5 lo 86 wt% Nb were processed in different environments and solidified at relatively low rates of 50-75 C/s to determine liquidus temperatures and to study solidification behavior. For all samples processed under very clean conditions, only Nb dendrites in a Cu matrix were observed; while in the presents of oxygen impurities, the alloys containing 5-35 wt% Nb exhibited microstructure of Nb-rich spheroids and Nb dendrites in the Cu matrix. The results obtained from clean conditions are in fair agreement with the Cu-Nb phase diagram having an S-shaped, near-horizontal appearances of the liquidus. The formation of Nb-rich droplets at slow cooling rates is discussed in terms of a stable liquid miscibility gap induced by oxygen.

Li, D.↗

NASA NTRS1998

Liquidus Temperatures and Solidification Behavior in the Copper-Niobium System

The copper-niobium phase diagram has been under active debate; thus, a corroboratory experimental study is needed. In this investigation, the melts of Cu-Nb alloys at compositions ranging from 5 to 86 wt pct Nb were processed in different environments and solidified at relatively low cooling rates of 50 to 75 C/s to determine liquidus temperatures and to study solidification behavior. For all samples processed under very clean conditions, only Nb dendrites in a Cu matrix were observed; while in the presence of oxygen impurities the alloys containing 5 to 35 wt pct Nb exhibited microstructure of Nb-rich spheroids and Nb dendrites in the Cu matrix. The results obtained from clean conditions are in fair agreement with the Cu-Nb phase diagram having an S-shaped, near-horizontal appearance of the liquidus. The formation of Nb- rich droplets at slow cooling rates is discussed in terms of a stable liquid miscibility gap induced by oxygen.

Li, D.↗

NASA NTRS1998

On the Cu-Nb Phase Diagram and Solidified Microstructures

Container and containerless processing was employed to determine liquidus temperatures and to examine microstructural development in the Cu-Nb system. The Cu-Nb phase diagram of an S-shaped, near-horizontal liquidus, has been confirmed by both the temperature-time profiles and resultant microstructures with only Nb dendrites in a Cu matrix, which were obtained from crucible experiments under clean conditions. However, the microstructural pathways of Cu-Nb alloys are particularly sensitive to processing variables. By the addition of oxygen impurities or rapid solidification, droplet-shaped morphology was observed for some compositions, implying occurrence of a liquid-phase separation. The effects of impurities and cooling rates are analyzed in connection with a stable and metastable liquid miscibility gap, respectively.

Li, D.↗

NASA NTRS1998

Undercooling, Liquid Separation and Solidification of Cu-Co Alloys

Large undercooling can induce not only various solidification pathways, but also a precursor reaction, or liquid separation. This paper deals with the latter effect of undercooling using examples of the Cu-Co system which has a flattened liquidus. Bulk Cu-Co alloys (about 7mm diameter) at compositions ranging from 10 to 90 wt pct Co were highly undercooled using a fluxing technique. Except for Cu-90 wt pct Co, liquid separation was directly observed as undercooling exceeded a critical value depending on the composition. It was also confirmed by a microstructural transition from dendrites to droplets above the critical undercooling. Finally, theoretical calculations regarding the metastable miscibility boundary and maximum droplet radius were made to analyze the experimental results.

Robinson, M. B.↗

NASA NTRS1996

Momentum Transfer Studies and Studies of Linear and Nonlinear Optical Properties of Metal Colloids and Semiconductor Quantum Dots

Phase 1 of this work involved design work on a momentum transfer device. The progress on design and testing will be presented. Phase 2 involved the systematic study of the MPD thruster for dual uses. Though it was designed as a thruster for space vehicles, the characteristics of the plasma make it an excellent candidate for industrial applications. This project sought to characterize the system for use in materials processing and characterization. The surface modification on ZnCdTe, CdTe, and ZnTe will be presented. Phase 3 involved metal colloids and semiconductor quantum dots. One aspect of this project involves a collaborative effort with the Solid State Division of ORNL. The thrust behind this research is to develop ion implantation for synthesizing novel materials (quantum dots wires and wells, and metal colloids) for applications in all optical switching devices, up conversion, and the synthesis of novel refractory materials. The ions of interest are Au, Ag, Cd, Se, In, P, Sb, Ga, and As. The specific materials of interest are: CdSe, CdTe, InAs, GaAs, InP, GaP, InSb, GaSb, and InGaAs. A second aspect of this research program involves using porous glass (25-200 A) for fabricating materials of finite size. The results of some of this work will also be reported.

Collins, W. E.↗

NASA NTRS1993

Effect of task load and task load increment on performance and workload

The goal of adaptive automated task allocation is the 'seamless' transfer of work demand between human and machine. Clearly, at the present time, we are far from this objective. One of the barriers to achieving effortless human-machine symbiosis is an inadequate understanding of the way in which operators themselves seek to reallocate demand among their own personal 'resources.' The paper addresses this through an examination of workload response, which scales an individual's reaction to common levels of experienced external demand. The results indicate the primary driver of performance is the absolute level of task demand over the increment in that demand.

Hancock, P. A.↗

NASA NTRS1990

Using a microgravity environment to probe wave turbulence

The experimental key to observing stochasticity or turbulence in a distribution of interacting propagating waves is the achievement of high amplitude and the use of a medium with a large coefficient of nonlinearity. The research indicates that capillary waves are the best means of observing this phenomenon; however, gravitational modifications of the capillary wave dispersion law greatly reduce the large coefficient of nonlinearity. Thus, a search for wave turbulence in a large drop of fluid that is positioned in a microgravity experiment was conducted. Capillary waves that run around the surface of the drop are excited, and their power spectrum and higher order correlations are analyzed for wave turbulence. The theoretical calculations indicate that modulations of the power spectrum should propagate as second sound waves. These issues have consequences for signal processing and plasma confinement.

Putterman, S.↗

NASA NTRS1990

Dynamical reference frames in the planetary and earth-moon systems

Estimates of the accuracies of the ephemerides are reviewed using data for planetary and lunar systems to determine the efficacy of the inherent dynamical reference frame. The varied observational data are listed and given with special attention given to ephemeris improvements. The importance of ranging data is discussed with respect to the inner four planets and the moon, and the discrepancy of 1 arcsec/century between mean motions determined by optical observations versus ranging data is addressed. The Viking mission data provide inertial mean motions for the earth and Mars of 0.003 arcsec/century which will deteriorate to 0.01 arcsec after about 10 years. Uncertainties for other planets and the moon are found to correspond to approximately the same level of degradation. In general the data measurements and error estimates are improving the ephemerides, although refitting the data cannot account for changes in mean motion.

Standish, E. M.↗

NASA NTRS1989

Advances in large inflatable reflectors

For most applications in space for which they were tried, inflatable structures show a significant weight reduction when compared to mechanical structures. Inflatables are unmatched when compared to mechanical structures when packaged volume is considered. The reliability of deployment of inflatable structures was known for years. When properly designed, such a system is inherently more reliable because it has very few points of failure. Fully inflatable vs. rigidized inflatable structures are discussed. The L'Garde solar concentrator experience is described. Reflector surface and cylinder rigidization, improvement in gore design tools, and expected advances in rigidization schemes with near future are examined.

Thomas, M.↗

NASA NTRS1986

The relative fluorescent efficiency of sodium salicylate between 90 and 800 eV

The relative fluorescent quantum efficiency of sodium salicylate was measured between 90 and 800 eV (138 -15 A) by the use of synchrotron radiation. A general increase in efficiency was observed in this spectral range except for abrupt decreases in efficiency at the carbon and oxygen K-edges. Beyond the oxygen K-edge (532 eV) the efficiency increased linearly with the incident photon energy to the limit of the present observations.

Angel, G. C.↗

NASA NTRS1983

Spectroscopy of cataclysmic variables. I - Observations

Spectroscopic observations of 69 cataclysmic variables are presented. Representative spectra, accurate coordinates, and finding charts are given for each object. Line strengths, equivalent widths, and line widths for all emission lines in 153 spectra are tabulated. The spectra are discussed briefly, and notes to selected objects are given.

Williams, G.↗

NASA NTRS1982

Further photometric observations of 2A 0311-227

Simultaneous V, B, and U photometry is presented for the AM Herculis type system 2A 0311-227. A Fourier analysis has failed to detect the 6 minute quasi-periodic oscillation reported earlier. It has, however, revealed the presence of oscillations at 20.2 and 13.7 minutes. These are interpreted in terms of a nonsinusoidal light curve. U, B, and V light curves are given and discussed in terms of current models for AM Her systems. B-V and U-B color curves are also presented, as is the behavior of the system in the color-color plane.

Williams, G.↗

NASA NTRS1981

The amazing X-ray light curve of 2A 0311-227

The X-ray light curve of the AM Herculis-type binary 2A 0311-227 is presented. A smooth modulation of the X-ray flux at the orbital period is obtained, along with an eclipse feature that is total for 0.1-0.8 keV photons yet not visible for photons above about 3 keV. This strong and smooth dependence on energy suggests an origin in the obscuration of the X-ray emitting region by a column of accreting gas. Furthermore, very strong quasi-periodic pulsations with a period of about 6 min are found in the soft X-ray light curve. This periodicity is also present in the optical and hard X-ray light curves, and in the circular polarization data. It seems likely that the periodicity arises from a modulation of the mass accretion rate onto the white dwarf, and possible that it originates in pulsations of a disk-magnetosphere boundary.

Patterson, J.↗