Engineering Papers⌕ Search

Engineering topics

Wang, Y

Publications and source records attributed to Wang, Y.

At least 163 records · Page 9

Potentiometric Sensors Based on Surface Molecular Imprinting: Detection of Cancer Biomarkers and Viruses

The continuing discovery of cancer biomarkers necessitates improved methods for their detection. Molecular imprinting using artificial materials provides an alternative to the detection of a wide range of substances. We applied surface molecular imprinting using self-assembled monolayers to design sensing elements for the detection of cancer biomarkers and other proteins. These elements consist of a gold-coated silicon chip onto which hydroxyl-terminated alkanethiol molecules and template biomolecule are co-adsorbed, where the thiol molecules are chemically bound to the metal substrate and self-assembled into highly ordered monolayers, the biomolecules can be removed, creating the foot-print cavities in the monolayer matrix for this kind of template molecules. Re-adsorption of the biomolecules to the sensing chip changes its potential, which can be measured potentiometrically. We applied this method to the detection of carcinoembryonic antigen (CEA) in both solutions of purified CEA and in the culture medium of a CEA-producing human colon cancer cell line. The CEA assay, validated also against a standard immunoassay, was both sensitive (detection range 2.5-250 ng/mL) and specific (no cross-reactivity with hemoglobin; no response by a non-imprinted sensor). Similar results were obtained for human amylase. In addition, we detected virions of poliovirus in a specific manner (no cross-reactivity to adenovirus, no response by a non-imprinted sensor). Our findings demonstrate the application of the principles of molecular imprinting to the development of a new method for the detection of protein cancer biomarkers and to protein-based macromolecular structures such as the capsid of a virion. This approach has the potential of generating a general assay methodology that could be highly sensitive, specific, simple and likely inexpensive.

59 BASIC BIOLOGICAL SCIENCES↗

Spatial Distribution of -Crystals in Metallocene-Made Isotactic Polypropylene Crystallized under Combined Thermal and Flow Fields

The present Article reports the relationships between molecular orientation, formation, and spatial distribution of {gamma}-crystals in metallocene-made isotactic polypropylene (m-iPP) samples prepared by two industrial processes: conventional injection molding (CIM) and oscillatory shear injection molding (OSIM), in which combined thermal and flow fields typically exist. In particular, spatial distributions of crystallinity, fraction of {gamma}-crystal (f{gamma}) with respect to {alpha}-crystal, and lamella-branched shish-kebab structure in the shaped samples were characterized by synchrotron two-dimensional (2D) wide-angle X-ray diffraction (WAXD) and small-angle X-ray scattering (SAXS) techniques. The results showed that the crystallinity in any given region of OSIM samples was always higher than that of CIM samples. The value of f{gamma} increased monotonously from skin to core in CIM samples, whereas the corresponding f{gamma} increased nonmonotonically in OSIM samples. The spatial distribution of {gamma}-crystal in OSIM samples can be explained by the epitaxial arrangement between {gamma}- and {alpha}-crystal in a lamella-branched shish-kebab structure. In the proposed model, the parent lamellae of {alpha}-crystal provide secondary nucleation sites for daughter lamellae of {alpha}-crystal and {gamma}-crystal, and the different content of parent lamellae results in varying amounts of {gamma}-crystal. In OSIM samples, the smallest parent-daughter ratio ([R] = 1.38) in the core region led to the lowest fraction of {gamma}-crystal (0.57), but relatively higher {gamma}-crystal content (0.69) at 600 and 1200 {micro}m depth of the samples (corresponding to [R] of 4.5 and 5.8, respectively). This is consistent with the proposed model where more parent lamellae provide more nucleation sites for crystallization, thus resulting in higher content of {gamma}-crystal. The melting behavior of CIM and OSIM samples was studied by differential scanning calorimetery (DSC). The observed double-melting peaks could be explained by the melting of {gamma}- and {alpha}-crystal of the shaped samples. The f{gamma} distribution calculated from the relative areas of the peaks in the DSC scans was also consistent with the WAXD results.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Anisotropic Elasticity of Jarosite: A High-P Synchrotron XRD Study

The elastic properties of jarosite were investigated using synchrotron X-ray diffraction coupled with a multi-anvil apparatus at pressures up to 8.1 GPa. With increasing pressure, the c dimension contracts much more rapidly than a, resulting in a large anisotropy in compression. This behavior is consistent with the layered nature of the jarosite structure, in which the (001) [Fe(O,OH){sub 6}]/[SO{sub 4}] sheets are held together via relatively weak K-O and hydrogen bonds. Fitting of the measured unit-cell parameters to the second-order Birch-Murnaghan equation of state yielded a bulk modulus of 55.7 {+-} 1.4 GPa and zero-pressure linear compressibilities of 3.2 x 10{sup -3} GPa{sup -1} for the a axis and 13.6 x 10{sup -3} GPa{sup -1} for the c axis. These parameters represent the first experimental determination of the elastic properties of jarosite.

08 HYDROGEN↗

Atomic nitrogen doping and p-type conduction in SnO{sub 2}

We report the atomic N-doped SnO{sub 2} films with p-type conduction grown via reactive sputtering at high nitrogen partial pressure. From the high-resolution x-ray photoelectron spectroscopy (XPS) and x-ray diffraction patterns, it is deduced that the N 1s with binding energy of 397 eV could be attributed to the atomic N in the SnO{sub 2} films. In addition, the results of Hall effect measurement indicate that the atomic N incorporated substitutionally at O sites act as acceptors, which is responsible for the p-type conduction of the N-doped SnO{sub 2} films. It is believed that these findings should stimulate further research on p-type SnO{sub 2} films and SnO{sub 2}-based ultraviolet optoelectronic devices.

36 MATERIALS SCIENCE↗

Nucleation, propagation and cleavage of target RNAs in Ago silencing complexes

The slicer activity of the RNA-induced silencing complex resides within its Argonaute (Ago) component, in which the PIWI domain provides the catalytic residues governing guide-strand mediated site-specific cleavage of target RNA. Here we report on structures of ternary complexes of Thermus thermophilus Ago catalytic mutants with 5'-phosphorylated 21-nucleotide guide DNA and complementary target RNAs of 12, 15 and 19 nucleotides in length, which define the molecular basis for Mg{sup 2+}-facilitated site-specific cleavage of the target. We observe pivot-like domain movements within the Ago scaffold on proceeding from nucleation to propagation steps of guide-target duplex formation, with duplex zippering beyond one turn of the helix requiring the release of the 3'-end of the guide from the PAZ pocket. Cleavage assays on targets of various lengths supported this model, and sugar-phosphate-backbone-modified target strands showed the importance of structural and catalytic divalent metal ions observed in the crystal structures.

36 MATERIALS SCIENCE↗

Branching ratios in the {beta} decays of {sup 12}N and {sup 12}B

Absolute branching ratios to unbound states in {sup 12}C populated in the {beta} decays of {sup 12}N and {sup 12}B are reported. Clean sources of {sup 12}N and {sup 12}B were obtained using the isotope separation on-line (ISOL) method. The relative branching ratios to the different populated states were extracted using single-alpha as well as complete kinematics triple-alpha spectra. These two largely independent methods give consistent results. Absolute normalization is achieved via the precisely known absolute branching ratio to the bound 4.44 MeV state in {sup 12}C. The extracted branching ratios to the unbound states are a factor of three more precise than previous measurements. Branching ratios in the decay of {sup 20}Na are also extracted and used to check the results.

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗

Breakup channels for {sup 12}C triple-{alpha} continuum states

The triple-{alpha}-particle breakup of states in the triple-{alpha} continuum of {sup 12}C has been investigated by way of coincident detection of all three {alpha} particles of the breakup. The states have been fed in the {beta} decay of {sup 12}N and {sup 12}B, and the {alpha} particles measured using a setup that covers all of the triple-{alpha} phase space. Contributions from the breakup through the {sup 8}Be(0{sup +}) ground state as well as other channels--interpreted as breakup through excited energies in {sup 8}Be--have been identified. Spins and parities of {sup 12}C triple-{alpha} continuum states are deduced from the measured phase-space distributions for breakup through {sup 8}Be above the ground state by comparison to a fully symmetrized sequential R-matrix description of the breakup. At around 10 MeV in {sup 12}C, the breakup is found to be dominated by 0{sup +} strength breaking up through the ghost of the {sup 8}Be(0{sup +}) ground state with L=0 angular momentum between the first emitted {alpha} particle and the intermediate {sup 8}Be nucleus. For {sup 12}C energies above the 12.7 MeV 1{sup +} state, however, L=2 breakup of a {sup 12}C 2{sup +} state through the {sup 8}Be(2{sup +}) excited state dominates. Furthermore, the possibility of a 2{sup +} excited state in the 9-12 MeV region of {sup 12}C is investigated.

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗

In situ measurement of interfacial tension of Fe-S and Fe-P liquids under high pressure using X-ray radiography and tomography techniques

Interfacial tension is one of the most important properties of the liquid iron alloy that controls the core formation process in the early history of the Earth and planets. In this study, we made high-pressure X-ray radiography and micro-tomography measurements to determine the interfacial tension between liquid iron alloys and silicate melt using the sessile drop method. The measured interfacial tension of liquid Fe-S decreased significantly (802-112 mN/m) with increasing sulphur content (0-40 at%) at 1.5 GPa. In contrast, the phosphorus content of Fe had an almost negligible effect on the interfacial tension of liquid iron. These tendencies in the effects of light elements are consistent with those measured at ambient pressure. Our results suggest that the effect of sulphur content on the interfacial tension of liquid Fe-S (690 mN/m reduction with the addition of 40 at% S) is large compared with the effect of temperature (~273 mN/m reduction with an increase of 200 K). The three-dimensional structure of liquid Fe-S was obtained at ~2 GPa and 1373-1873 K with a high-pressure tomography technique. The Fe-S droplet was quite homogeneous when evaluated in a slice of the three-dimensional image.

36 MATERIALS SCIENCE↗

Development of Experimental Techniques Using LVP (Large Volume Press) at GSECARS Beamlines, Advanced Photon Source (in Japanese with English abstract)

GSECARS (GeoSoilEnviroCARS, the University of Chicago) operates a bending magnet and an undulator beamlines at Sector 13, Advanced Photon Source. Experimental technique for High Pressure X-ray Tomographic Microscope (HPXTM) using monochromatized X-rays has been developed. The module for HPXTM also has shear deformation capability, which enables us to perform HPXTM experiments for microstructure developed by shear deformation under high pressure. A combination of Deformation DIA (D-DIA) and monochromatic X-rays has been developed for quantitative deformation experiments under pressure above 10 GPa. Deformation experiments of e-iron was performed at pressures up to 19 GPa and temperatures up to 700 K.

43 PARTICLE ACCELERATORS↗

Preparation and photoluminescence of undoped ZnTiO{sub 3} thin films

ZnTiO{sub 3} thin films were prepared by radio frequency cosputtering of ZnO and TiO{sub 2}. It was found the as-prepared film is amorphous and the cubic phase ZnTiO{sub 3} films form after annealing at temperature above 500 deg. C. The absorption spectra indicate that the optical band gap of the crystalline ZnTiO{sub 3} film is about 3.70 eV. A strong photoluminescence band centered at 355 nm consisting of two emission peaks was observed in 800 deg. C annealed ZnTiO{sub 3} thin film, and the peak positions of these two emission move to short wavelength with increasing annealing temperature. It was found the emission peak at ultraviolet zone is resulted from O{sup 2-} vacancy and that in the blue zone is attributed to Zn{sup 2+} vacancy.

36 MATERIALS SCIENCE↗

New Precise Measurement of the Pion Weak Form Factors in pi{sup +}->e{sup +}nugamma Decay

We have measured the pi{sup +}->e{sup +}{nu}{gamma} branching ratio over a wide region of phase space, based on a total of 65 460 events acquired using the PIBETA detector. Minimum-{chi}{sup 2} fits to the measured (E{sub e}{sup +}, E{sub {gamma}}) energy distributions result in the weak form factor value of F{sub A}=0.0119(1) with a fixed value of F{sub V}=0.0259. An unconstrained fit yields F{sub V}=0.0258(17) and F{sub A}=0.0117(17). In addition, we have measured a=0.10(6) for the dependence of F{sub V} on q{sup 2}, the e{sup +}{nu} pair invariant mass squared, parametrized as F{sub V}(q{sup 2})=F{sub V}(0)(1+aq{sup 2}). The branching ratio for the kinematic region E{sub {gamma}}>10 MeV and {theta}{sub e}{sup +}{sub {gamma}}>40 deg. is measured to be B{sup expt}=73.86(54)x10{sup -8}. Earlier deviations we reported in the high-E{sub {gamma}}-low-E{sub e}{sup +} kinematic region are resolved without a tensor term. We also derive new values for the pion polarizability {alpha}{sub E}=2.78(10)x10{sup -4} fm{sup 3} and neutral pion lifetime {tau}{sub {pi}}{sub 0}=(8.5+-1.1)x10{sup -17} s.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗

Perspectives of a mid-rapidity dimuon program at the RHIC: a novel and compact muon telescope detector

We propose a large-area, cost-effective Muon Telescope Detector (MTD) at mid-rapidity for the Solenoidal Tracker at RHIC (STAR) and for the next generation of detectors at a possible electron-ion collider. We utilize large Multi-gap Resistive Plate Chambers with long readout strips (long-MRPC) in the detector design. The results from cosmic ray and beam tests show the intrinsic timing and spatial resolution for a long-MRPC are 60-70 ps and {approx} 1 cm, respectively. The performance of the prototype muon telescope detector at STAR indicates that muon identification at a transverse momentum of a few GeV/c can be achieved by combining information from track matching with the MTD, ionization energy loss in the Time Projection Chamber, and time-of-flight measurements. A primary muon over secondary muon ratio of better than 1/3 can be achieved. This provides a promising device for future quarkonium programs and primordial dilepton measurements at RHIC. Simulations of the muon efficiency, the signal-to-background ratio of J/{psi}, the separation of {Upsilon} 1S from 2S+3S states, and the electron-muon correlation from charm pair production in the RHIC environment are presented.

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗

S-Phase Cells Are More Sensitive to High-Linear Energy Transfer Radiation

Purpose: S-phase cells are more resistant to low-linear energy transfer (LET) ionizing radiation (IR) than nonsynchronized and G{sub 1}-phase cells, because both nonhomologous end-joining (NHEJ) and homologous recombination repair can repair DNA double-strand breaks (DSBs) in the S phase. Although it was reported 3 decades ago that S-phase cells did not show more resistance to high-LET IR than cells in other phases, the mechanism remains unclear. We therefore attempted to study the phenotypes and elucidate the mechanism involved. Methods and Materials: Wild-type and NHEJ-deficient cell lines were synchronized using the double-thymidine approach. A clonogenic assay was used to detect the sensitivity of nonsynchronized, synchronized S-phase, and G{sub 2}-phase cells to high- and low-LET IR. The amounts of Ku bound to DSBs in the high- and low-LET-irradiated cells were also examined. Results: S-phase wild-type cells (but not NHEJ-deficient cells) were more sensitive to high-LET IR than nonsynchronized and G{sub 2}-phase cells. In addition, S-phase wild-type cells showed less efficient Ku protein binding to DSBs than nonsynchronized and G{sub 2}-phase cells in response to high-LET IR, although all cells at all phases showed similarly efficient levels of Ku protein binding to DSBs in response to low-LET IR. Conclusions: S-phase cells are more sensitive to high-LET IR than nonsynchronized and G{sub 2}-phase cells, because of the following mechanism: it is more difficult for Ku protein to bind to high-LET IR-induced DNA DSBs in S-phase cells than in cells at other phases, which results in less efficient NHEJ.

62 RADIOLOGY AND NUCLEAR MEDICINE↗

Low energy Ar{sup +} sputtering-induced GaAs quantum dot formation and evolution

GaAs quantum dots formed by Ar{sup +} bombardment under normal beam incidence are investigated in both sputtering time and energy domains. When ion energy is maintained at 1000 eV, the surface morphology is found to saturate with high dot uniformity at 3600 s sputtering time. For longer sputtering times, the surface pattern becomes significantly disordered with fluctuations of approx28 and approx24 nm in dot height and base width, respectively. The temporal evolution of dots formed at lower ion energies exhibits a similar trend, as observed at 1000 eV. However, the surface morphology develops in a smaller size scale. Based on the experimental results, we propose a power law model to interpret the correlation between sputtering time and energy as well as their impact on the evolution of lateral dot sizes. The experimental results are in good agreement with the theoretical prediction. Furthermore, photoluminescence is performed to characterize the as-grown and annealed GaAs/AlGaAs quantum dots formed by ion sputtering and molecular beam epitaxy. A significant improvement in the integrated photoluminescence signal has been obtained after thermal annealing, indicating that the potential nonradiative defects can be effectively removed by postgrowth annealing of the sputtering-induced GaAs quantum dot system.

77 NANOSCIENCE AND NANOTECHNOLOGY↗

Small-Angle X-Ray Scattering of Reduced Ribonuclease A: Effects of Solution Conditions And Comparisons With a Computational Model of Unfolded Proteins

The disulfide-reduced form of bovine ribonuclease A, with the Cys thiols irreversibly blocked, was characterized by small-angle x-ray scattering. To help resolve the conflicting results and interpretations from previous studies of this model unfolded protein, we measured scattering profiles using a range of solution conditions and compared them with the profiles predicted by a computational model for a random-coil polypeptide. Analysis of the simulated and experimental profiles reveals that scattering intensities at intermediate angles, corresponding to interatomic distances in the range of 5--20 {angstrom}, are particularly sensitive to changes in solvation and can be used to assess the internal scaling behavior of the polypeptide chain, expressed as a mass fractal dimension, D{sub m}. This region of the scattering curve is also much less sensitive to experimental artifacts than is the very small angle regime (the Guinier region) that has been more typically used to characterize unfolded proteins. The experimental small-angle x-ray scattering profiles closely matched those predicted by the computational model assuming relatively small solvation energies. The scaling behavior of the polypeptide approaches that of a well-solvated polymer under conditions where it has a large net charge and at high urea concentrations. At lower urea concentrations and neutral pH, the behavior of the chain approaches that expected for {theta}-conditions, where the effects of slightly unfavorable interactions with solvent balance those of excluded volume, leading to scaling behavior comparable to that of an idealized random walk chain. Though detectable, the shift toward more compact conformations at lower urea concentrations does not correspond to a transition to a globule state and is associated with little or no reduction in conformational entropy. This type of collapse, therefore, is unlikely to greatly reduce the conformational search for the native state.

59 BASIC BIOLOGICAL SCIENCES↗

Advances in full field microscopy with table-top soft x-ray lasers

We describe recent advances in the demonstration of table-top full field microscopes that use soft x-ray lasers for illumination. We have achieved wavelength resolution and single shot exposure operation with a very compact 46.9 nm microscope based on a desk-top size capillary discharge laser. This {lambda}-46.9 nm microscope has been used to capture full field images of a variety of nanostructure systems and surfaces. In a separate development we have demonstrated a zone plate microscope that uses {lambda}=13.2 nm laser illumination to image absorption defects in an extreme ultraviolet lithography (EUVL) mask in the same geometry used in a 4x demagnification EUVL stepper. Characterization of the microscope’s transfer function shows it can resolve 55 nm half period patterns. With these capabilities, the {lambda}-13.2 nm microscope is well suited for evaluation of pattern and defect printability of EUVL masks for the 22 nm node.

36 MATERIALS SCIENCE↗

A new low drift integrator system for the Experiment Advanced Superconductor Tokamak

A new type of the integrator system with the low drift characteristic has been developed to accommodate the long pulse plasma discharges on Experiment Advanced Superconductor Tokamak (EAST). The integrator system is composed of the Ethernet control module and the integral module which includes one integrator circuit, followed by two isolation circuits and two program-controlled amplifier circuits. It compensates automatically integration drift and is applied in real-time control. The performance test and the experimental results in plasma discharges show that the developed integrator system can meet the requirements of plasma control on the accuracy and noise level of the integrator in long pulse discharges.

46 INSTRUMENTATION RELATED TO NUCLEAR SCIENCE AND ↗