Engineering Papers⌕ Search

Engineering topics

Wang, Qing

Publications and source records attributed to Wang, Qing.

At least 55 records · Page 3

Random Copolymers Allow Control of Crystallization and Microphase Separation in Fully Conjugated Block Copolymers

Thin films of fully conjugated donor–acceptor block copolymers composed of an electron donating block and an electron accepting block can be used as single component photoactive layers in organic photovoltaic (OPV) devices. In order to realize their full potential, control over microphase separation and thin-film morphology are critical. In conjugated block copolymer systems where one or more blocks can crystallize, the morphological evolution is governed by the competition between microphase separation and crystallization. In this work, we control crystallization of fully conjugated block copolymers with a random copolymer block. Additionally, we suppress the crystal packing of poly(3-hexylthiophene-2,5-diyl) (P3HT) through the insertion of a small number of 3-octylthiophene (3OT) units within the chains, yielding poly(3-hexylthiophene-2,5-diyl- random -3-octylthiophene-2,5-diyl) (P[3HT- r -3OT]). Furthermore, while crystallization of P3HT dominates the morphology and prevents microphase separation in poly(3-hexylthiophene-2,5-diyl)- block -poly((9,9-dioctylfluorene-2,7-diyl)- alt -(4,7-di(thiophene-2-yl)-2,1,3-benzothiadiazole)-5',5"-diyl) (P3HT- b -PFTBT), modest levels of 3OT suppress crystallization in P[3HT- r -3OT]- b -PFTBT, and permit microphase separation. Thus, we demonstrate that incorporating a random copolymer into a donor–acceptor block copolymer can increase control over microphase separation and lead to enhanced performance in OPV devices.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Down-regulation of MAP2K1 by miR-539 inhibits hepatocarcinoma progression

Liver cancer has been considered as one of the major leading causes of cancer-related mortality. The incidence of liver cancer tends to increase in less developed regions. Increasing evidences have demonstrated that mircoRNAs (miRNAs) play crucial roles in the modulation of tumor growth and progression. Whereas, the functional role of miR-539 in hepatocellular carcinoma (HCC) is not well established. In our present study, we sought to explore biological role of miR-539 in HCC progression. qRT-PCR was utilized to evaluate the expression level of miR-539. Immunoblotting analysis, qRT-PCR and luciferase reporter assays were used for the identification of the potential target of miR-539. Proliferation, migration and invasion assays and flow cytometric were performed to assess the biological functional role of miR-539. The molecular signaling pathways related to the integration of miR-539 were also evaluated. MiR-539 was reduced in human HCC. Mitogen-activated protein kinase 1, also known as MAP2K1 was verified as the target of miR-539. Overexpression of miR-539 inhibited migration, invasion and cell proliferation, while apoptosis rate was increased. Knockdown or overexpression of MAP2K1 in HCC cell transfected with ag-miR-539 or in-miR-539 indicated that miR-539 suppresses the progression of HCC by directly targeting and regulating MAP2K1. Our results reveal that miR-539 might be a tumor suppressor in HCC, supporting a potential target for advanced therapeutic strategy for this disease.

60 APPLIED LIFE SCIENCES↗

Fabrication and Mechanical Properties of In Situ Synthesized Ti{sub 2}AlN/TiAl Composite

TiAl matrix composites reinforced with Ti{sub 2}AlN were fabricated by in situ reactive method of powder metallurgy. Microstructures, bending properties at room temperature and compressive properties at elevated temperatures were investigated in contrast with those of TiAl alloy. The results reveal that the microstructure of TiAl matrix is significantly refined due to the synthesis of Ti{sub 2}AlN. 15 vol.%Ti{sub 2}AlN/TiAl exhibits excellent bending properties at room temperature, with bending strength of 753 MPa and fracture strain of 0.74%, which are 24.3 and 19.7% higher than those of TiAl alloy. The compressive strength of Ti{sub 2}AlN/TiAl is markedly improved in comparison to that of TiAl alloy at elevated temperatures. Noticeably, the compressive strength of 15 and 35 vol.%Ti{sub 2}AlN/TiAl increases by 67.4 and 58.7% at 1000 °C, respectively. The remarkable enhancement of mechanical performance is mainly due to the noteworthy refinement of TiAl matrix and the efficient obstruction of Ti{sub 2}AlN particles to crack propagation, as well as the effective load-carrying role of Ti{sub 2}AlN with high elastic modulus.

36 MATERIALS SCIENCE↗

Investigation on Tribological Properties of the Pre-oxidized Ti{sub 2}AlN/TiAl Composite

Different oxidation layers on the Ti{sub 2}AlN/TiAl substrate which was fabricated by in situ synthesis were prepared through thermal oxidation process. The microstructure, phase identification and elements distribution of the oxidation layers were analyzed. The tribological performance of pre-oxidized composites against Si{sub 3}N{sub 4} ball at 25 and 600 °C, as well as the effect of pre-oxidation layers on tribological performance was systematically investigated. The results show that, compared to Ti{sub 2}AlN/TiAl, the pre-oxidized composites present more excellent tribological properties, especially the wear resistance at 600 °C. It is a significant finding that, different from severe abrasive wear and plastic deformation of Ti{sub 2}AlN/TiAl, the tribo-films formed by the pre-oxidation layers on the worn surface of pre-oxidized composites weaken abrasive wear and suppress the development of plastic deformation to protect the underlying composite substrate from wear. Moreover, the stable cooperation on the interface between tribo-films and Si{sub 3}N{sub 4} ball results in the relatively steady friction coefficient.

36 MATERIALS SCIENCE↗

Improvement of the Magnetization and Coercivity of La{sub 0.67}Ca{sub 0.33}MnO{sub 3} Induced by Substitution of Nickel for Manganese

La{sub 0.67}Ca{sub 0.33}Mn{sub 1−x}Ni{sub x}O{sub 3} (0 ≤x ≤ 0.3) is synthesized by solid-state reaction at low temperatures, followed by calcination in air. The precursor and its calcined products are characterized by thermogravimetry and differential scanning calorimetry, x-ray powder diffraction, scanning electron microscopy, and vibrating sample magnetometer. A high-crystallized La{sub 0.67}Ca{sub 0.33}Mn{sub 1−x}Ni{sub x}O{sub 3} with an orthorhombic structure is obtained when the precursor is calcined at 900{sup ∘}C in air for 3 h. Crystallite size of La{sub 0.67}Ca{sub 0.33}Mn{sub 1−x}Ni{sub x}O{sub 3} increases with the increase of Ni content, attributed to the decrease of lattice strains of the La{sub 0.67}Ca{sub 0.33}Mn{sub 1−x}Ni{sub x}O{sub 3} with the increase in Ni content. Nickel substitution can markedly improve coercivity and specific magnetization of La{sub 0.67}Ca{sub 0.33}Mn{sub 1−x}Ni{sub x}O{sub 3}. The coercive field (9 Oe) of La{sub 0.67}Ca{sub 0.33}Mn{sub 0.7}Ni{sub 0.3}O{sub 3} is higher, even at 293 K, indicating that La{sub 0.67}Ca{sub 0.33}Mn{sub 0.7}Ni{sub 0.3}O{sub 3} continues being ferromagnetic above 260 K (Curie temperature for LCMO).

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Biocompatible and Flexible Hydrogel Diode‐Based Mechanical Energy Harvesting

Energy harvesting devices which convert low frequency mechanical energy sources such as human motions and ocean waves into electricity are attractive for powering portable devices and for green‐energy generation. To date the state‐of‐the‐art mechanical energy harvesting devices can only work efficiently at high vibration frequencies. Here, a biocompatible and flexible mechanical energy harvesting device is reported utilizing ionic diode as the transducer. This device utilizes the redistribution of cations and anions at the two hydrogel electrodes under stress to convert mechanical energy to electricity. It is shown that the device can be operated at low frequencies with high output current, e.g., 13.5 µA cm −2 , owing to the high ion concentration and unique working mechanism of the device. Moreover, the output current density and power density can be improved further by employing a multilayer configuration. By stacking five units with parallel structure, the hydrogel diode device can generate an output current of 64.3 µA cm −2 and power density of 0.48 µW cm −2 . Considering the very high electric energy density of ionic devices, the hydrogel energy harvesting device demonstrated herein paves a way for efficient mechanical energy harvesting from many common low frequency sources.

Zhou, Yue↗

Performance of a Laser Ignited Multicylinder Lean Burn Natural Gas Engine

Market demands for lower fueling costs and higher specific powers in stationary natural gas engines has engine designs trending towards higher in-cylinder pressures and leaner combustion operation. However, Ignition remains as the main limiting factor in achieving further performance improvements in these engines. Addressing this concern, while incorporating various recent advances in optics and laser technologies, laser igniters were designed and developed through numerous iterations. Final designs incorporated water-cooled, passively Q-switched, Nd:YAG micro-lasers that were optimized for stable operation under harsh engine conditions. Subsequently, the micro-lasers were installed in the individual cylinders of a lean-burn, 350 kW, inline 6-cylinder, open-chamber, spark ignited engine and tests were conducted. To the best of our knowledge, this is the world’s first demonstration of a laser ignited multi-cylinder natural gas engine. The engine was operated at high-load (298 kW) and rated speed (1800 rpm) conditions. Ignition timing sweeps and excess-air ratio (λ) sweeps were performed while keeping the NOx emissions below the USEPA regulated value (BSNOx < 1.34 g/kW-hr), and while maintaining ignition stability at industry acceptable values (COV_IMEP <5 %). Through such engine tests, the relative merits of (i) standard electrical ignition system, and (ii) laser ignition system were determined. In conclusion, a rigorous combustion data analysis was performed and the main reasons leading to improved performance in the case of laser ignition were identified.

33 ADVANCED PROPULSION SYSTEMS↗

Prechamber equipped laser ignition for improved performance in natural gas engines

Lean-burn operation of stationary natural gas engines offers lower NO x emissions and improved efficiency. A proven pathway to extend lean-burn operation has been to use laser ignition instead of standard spark ignition. However, under lean conditions, flame speed reduces thereby offsetting any efficiency gains resulting from the higher ratio of specific heats, γ. The reduced flame speeds, in turn, can be compensated with the use of a prechamber to result in volumetric ignition, and thereby lead to faster combustion. In this study, the optimal geometry of PCLI was identified through several tests in a single-cylinder engine as a compromise between autoignition, NO x and soot formation within the prechamber. Subsequently, tests were conducted in a single-cylinder natural gas engine comparing the performance of three ignition systems: standard electrical spark ignition (SI), single-point laser ignition (LI), and prechamber equipped laser ignition (PCLI). Out of the three, the performance of PCLI was far superior compared to the other two. Efficiency gain of 2.1% points could be achieved while complying with EPA regulation (BSNO x < 1.34 kW-hr) and the industry standard for ignition stability (COV_IMEP < 5%). Finally, test results and data analysis are presented identifying the combustion mechanisms leading to the improved performance.

33 ADVANCED PROPULSION SYSTEMS↗

Vibrational Sum Frequency Generation (SFG) Analysis of Ferroelectric Response of PVDF-Based Copolymer and Terpolymer

In poly(vinylidene difluoride) (PVDF)-based polymers, the alignment of dipoles of the crystalline $β$ phase with alltrans conformations is responsible for ferroelectricity; however, there is a lack of direct spectroscopic evidence for this phenomenon. We report in situ monitoring of the molecular orientations associated with ferroelectric responses of PVDF-based polymers using vibrational sum frequency generation (SFG) spectroscopy. The orientation of CH 2 groups with respect to the -(CH 2 CF 2 ) n - chain axis of the poled $β$ domains in a PVDF copolymer was determined from the SFG dependence of an uniaxially aligned sample on the laser polarization and azimuthal angle. The relative intensities of CH 2 symmetric and asymmetric stretch modes as well as their total intensities revealed the transformation of the all-trans conformation domains during the electrical poling of PVDF based co- and terpolymer films.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

The BCC/B2 morphologies in Al x NiCoFeCr high-entropy alloys

Here, the present work primarily investigates the morphological evolution of the body-centered-cubic (BCC)/B2 phases in Al x NiCoFeCr high-entropy alloys (HEAs) with increasing Al content. It is found that the BCC/B2 coherent morphology is closely related to the lattice misfit between these two phases, which is sensitive to Al. There are two types of microscopic BCC/B2 morphologies in this HEA series: one is the weave-like morphology induced by the spinodal decomposition, and the other is the microstructure of a spherical disordered BCC precipitation on the ordered B2 matrix that appears in HEAs with a much higher Al content. The mechanical properties, including the compressive yielding strength and microhardness of the Al x NiCoFeCr HEAs, are also discussed in light of the concept of the valence electron concentration (VEC).

mechanical property↗

Proton enhanced dynamic battery chemistry for aprotic lithium–oxygen batteries

Water is generally considered to be deteriorating to the performance of aprotic Li-air batteries, while it is challenged by the disparate effects observed recently. This has provoked a range of discussion on the role of water and its impact on the battery operation. In this work, a distinct battery chemistry that prevails in water-contaminated aprotic Li-O 2 batteries was discovered. Both lithium ions and protons were found to be involved in the oxygen reduction (ORR) and evolution reactions (OER), and LiOOH and LiOH were identified as predominant materials in the discharge product. As a new lithium compound, the crystallographic and spectroscopic characteristics of LiOOH∙H 2 O were scrutinized both experimentally and theoretically. The structure of LiOOH∙H 2 O was found to be closely related to that of LiOH∙H 2 O implying a fast conversion kinetics between the two phases. Intriguingly, LiOOH∙H 2 O exhibits superior dynamic property towards the reaction with I 3 - , which renders considerably lower overpotential during the charging process. We anticipate that the new battery chemistry unveiled in this mechanistic study would provide important insights to the understanding of nominally aprotic Li-O 2 batteries and help to tackle the critical issues confronted.

25 ENERGY STORAGE↗

Regularized deconvolution method for turbulent combustion modeling

The modeling of filtered chemical source terms in large-eddy simulation (LES) of turbulent reacting flows remains a challenge. Deconvolution methods are an attractive technique for representing these unclosed terms. With this technique, filtered scalars are reconstructed through deconvolution. The chemical source terms that are computed directly from the deconvolved scalars are filtered explicitly to represent the turbulence-chemistry interaction. However, the approximate deconvolution method (ADM), frequently employed for non-reacting flows, exhibits shortcomings for reacting scalars. This is because ADM does not ensure essential conservation and boundedness conditions. So to address this issue, we propose a regularized deconvolution method (RDM) based on an optimization procedure. We conduct a priori and a posteriori analyses to examine RDM as a closure in LES. These investigations are performed in the context of explicit filtering. By showing that RDM is accurate and stable with respect to both the filter width and time, we conclude that the new deconvolution method shows promise in application to combustion LES.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Single-handed helical carbonaceous nanotubes prepared using a pair of cationic low molecular weight gelators

Highlights: • 3-aminophenol-formaldeyde resins were prepared through a templating method. • A pair of cationic gelators have been used as the templates. • Single-handed helical carbonaceous nanotubes were obtained after carbonization. • The carbonaceous nanotubes showed optical activity. - Abstract: We design a facile route to obtain enantiopure carbonaceous nanostructures, which have potential application as chiral sensors, electromagnetic wave absorbers, and asymmetric catalysts. A pair of cationic low molecular weight gelators was synthesized, which were able to self-assemble into twisted nanoribbons in ethanol at a concentration of 20 g L{sup −1} at 25 °C. Single-handed helical 3-aminophenol-formaldehyde resin nanotubes with optical activity were prepared using the self-assembly of the low molecular weight gelators as templates. After carbonization, single-handed helical carbonaceous nanotubes were obtained and characterized using circular dichroism, wide-angle X-ray diffraction, field-emission scanning electron microscopy, transmission electron microscopy, and Raman spectroscopy. The results indicate that the walls of the nanotubes are amorphous carbon. Moreover, the left- and right-handed helical nanotubes exhibit opposite optical activity.

36 MATERIALS SCIENCE↗

Direct detection of exothermic dark matter with light mediator

We study the dark matter (DM) direct detection for the models with the effects of the isospin-violating couplings, exothermic scatterings, and/or the lightness of the mediator, proposed to relax the tension between the CDMS-Si signals and null experiments. In the light of the new updates of the LUX and CDMSlite data, we find that many of the previous proposals are now ruled out, including the Ge-phobic exothermic DM model and the Xe-phobic DM one with a light mediator. We also examine the exothermic DM models with a light mediator but without the isospin violation, and we are unable to identify any available parameter space that could simultaneously satisfy all the experiments. The only models that can partially relax the inconsistencies are the Xe-phobic exothermic DM models with or without a light mediator. But even in this case, a large portion of the CDMS-Si regions of interest has been constrained by the LUX and SuperCDMS data.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗