Engineering topics
Wang, Qing
Publications and source records attributed to Wang, Qing.
Heterogeneity of soil structure and fertility during desertification of alpine grassland in northwest Sichuan
Abstract The variations of soil structure and soil physical–chemical properties in the process of alpine grassland desertification were revealed, and the indicators of grassland desertification were put forward in order to deepen the understanding of the law of degradation succession and development of alpine grassland. It was used to provide scientific basis for ecological restoration and improvement of ecological service function of alpine grassland. With severe desertification alpine grassland as the core in the Hongyuan County, Tibetan Qiang Autonomous Prefecture of Ngawa, Sichuan Province, China, along both the directions of wetland and arid grassland, the heterogeneity of soil structure and soil fertility in both directions was studied by the analysis of the mean weight diameter (MWD), geometric mean diameter (GMD), >0.25 mm aggregate content ( R 0.25 ), fractal dimension ( D ), soil bulk density, soil moisture content, and soil nutrients. Our results showed that MWD, GMD, and R 0.25 all gradually increased, but the D decreased with the reduction in the degree of desertification in the arid grassland and wetland, resulting in the strong stability of soil structure. The decreasing rate of the D in the direction of arid grassland was faster than that of wetland. Therefore, soil structure stability and erosion resistance in the direction of arid grassland were stronger than that of wetland soil; the D had different response to aggregates with different particle sizes. The aggregate less than 0.25 mm ( r = 0.981, P < 0.01) and 1–2 mm ( r = −0.79, P < 0.01) had the largest responses in the direction of the arid grassland and wetland, respectively; the aggregate more than 1 mm and 1–2 mm can be used as indicators to evaluate desertification of the soil in the direction of the arid grassland and wetland, respectively. The higher the content of the indicating aggregates, the weaker the degree of the desertification.
Electrochemical Deposition of Conformal Semiconductor Layers in Nanoporous Oxides for Sensitized Photoelectrodes
Nanoporous photoelectrodes with photoactive semiconductors have been investigated for various energy applications such as solar cells and photoelectrochemical cells, but the deposition of the semiconducting materials on the nanoporous electrodes has been very challenging due to pore clogging or complete pore filling. Here, we propose a band alignment model that explains the morphology of the electrochemically deposited semiconductor layer on the semiconducting nanoporous oxide electrode. Briefly, the coating material with a conduction band edge higher (i.e., more negative) than that of the electrode material forms a conformal coating, which maintains the initial nanoporous structure. As a result, a conformal CdSe layer can be electrodeposited onto TiO 2 nanotubes, which can be used as a photoelectrode of a sensitized solar cell. The electron dynamics studies revealed that the CdSe-sensitized TiO 2 nanotube electrode exhibited faster charge transport and slower charge recombination than its dye-sensitized counterpart, which has been ascribed to the passivation of surface traps and the physically blocked back-electron transfer by the CdSe layer as well as the higher conduction band of CdSe.
Integrated Triboelectric Nanogenerators in the Era of the Internet of Things
Abstract Since their debut in 2012, triboelectric nanogenerators (TENGs) have attained high performance in terms of both energy density and instantaneous conversion, reaching up to 500 W m −2 and 85%, respectively, synchronous with multiple energy sources and hybridized designs. Here, a comprehensive review of the design guidelines of TENGs, their performance, and their designs in the context of Internet of Things (IoT) applications is presented. The development stages of TENGs in large‐scale self‐powered systems and technological applications enabled by harvesting energy from water waves or wind energy sources are also reviewed. This self‐powered capability is essential considering that IoT applications should be capable of operation anywhere and anytime, supported by a network of energy harvesting systems in arbitrary environments. In addition, this review paper investigates the development of self‐charging power units (SCPUs), which can be realized by pairing TENGs with energy storage devices, such as batteries and capacitors. Consequently, different designs of power management circuits, supercapacitors, and batteries that can be integrated with TENG devices are also reviewed. Finally, the significant factors that need to be addressed when designing and optimizing TENG‐based systems for energy harvesting and self‐powered sensing applications are discussed.
Reaching the Energy Density Limit of Layered O3‐NaNi 0.5 Mn 0.5 O 2 Electrodes via Dual Cu and Ti Substitution
Abstract Although being less competitive energy density‐wise, Na‐ion batteries are serious alternatives to Li‐ion ones for applications where cost and sustainability dominate. O3‐type sodium layered oxides could partially overcome the energy limitation, but their practical use is plagued by a reaction process that enlists numerous phase changes and volume variations while additionally being moisture sensitive. Here, it is shown that the double substitution of Ti for Mn and Cu for Ni in O3‐NaNi 0.5− y Cu y Mn 0.5− z Ti z O 2 can alleviate most of these issues. Among this series, electrodes with specific compositions are identified that can reversibly release and uptake ≈0.9 sodium per formula unit via a smooth voltage‐composition profile enlisting minor lattice volume changes upon cycling as opposed to Δ V / V ≈23% in the parent NaNi 0.5 Mn 0.5 O 2 while showing a greater resistance against moisture. The positive attributes of substitution are rationalized by structure considerations supported by density functional theory (DFT) calculations. Electrodes with sustained capacities of ≈180 mAh g −1 are successfully implemented into 18 650 Na‐ion cells having greater performances, energy density‐wise (≈250 Wh L −1 ), than today's Na 3 V 2 (PO 4 ) 2 F 3 /HC Na‐ion technology which excels in rate capabilities. These results constitute a step forward in increasing the practicality of Na‐ion technology with additional opportunities for applications in which energy density prevails over rate capability.
Effects of hydration on fractures and shale permeability under different confining pressures: An experimental study
Water-rich fracturing fluids are injected into gas shale formations to promote the effective development of gas. However, the relationship between gas production decreases and the variability flow-back fluid behavior (rate and amount) remains a significant challenge to the industry. This study focused on the effects of water hydration on the rock fracture properties of a major gas shale formation in China. Shale from hydration experiments was characterized for a number of key parameters including length, volume, width, surface area, thickness and fracture frequency. X-ray computed tomography (CT) scanning was conducted on shale reservoir samples exposed to water at zero overburden stress and under three different confining pressures (725 psi, 2175 psi, and 2900 psi). CT scanning images were obtained to evaluate fracture evolutions during hydration for both the connected and unconnected fracture networks. In addition, permeabilities before and after hydration were also quantified. Results from the ambient condition experiment revealed the propagation of fractures, the formation of new fractures, and the formation of better connectivity caused by a more complicated fracture network. However, the fracture evolution of the other three samples under confining pressures are markedly different, including: more unconnected fracture networks, less fracture volume, and a poorer connectivity of fractures.
Scalable Polymer Nanocomposites with Record High‐Temperature Capacitive Performance Enabled by Rationally Designed Nanostructured Inorganic Fillers
Abstract Next‐generation microelectronics and electrical power systems call for high‐energy‐density dielectric polymeric materials that can operate efficiently under elevated temperatures. However, the currently available polymer dielectrics are limited to relatively low working temperatures. Here, the solution‐processable polymer nanocomposites consisting of readily prepared Al 2 O 3 fillers with systematically varied morphologies including nanoparticles, nanowires, and nanoplates are reported. The field‐dependent electrical conduction of the polymer nanocomposites at elevated temperatures is investigated. A strong dependence of the conduction behavior and breakdown strength of the polymer composites on the filler morphology is revealed experimentally and is further rationalized via computations. The polymer composites containing Al 2 O 3 nanoplates display a record capacitive performance, e.g., a discharged energy density of 3.31 J cm −3 and a charge–discharge efficiency of >90% measured at 450 MV m −1 and 150 °C, significantly outperforming the state‐of‐the‐art dielectric polymers and nanocomposites that are typically prepared via tedious, low‐yield approaches.
A regularized deconvolution method for turbulent closure modeling in implicitly filtered large-eddy simulation
Turbulence closure models that are based on a regularized deconvolution method (RDM) are proposed for application to implicitly filtered Large-Eddy Simulation (LES). This method reconstructs sub-grid scale contributions by approximately recovering filtered quantities through an optimization approach. Physical principles on the boundedness and conservation of reconstructed quantities are preserved by constraining the optimization problem. Further, to account for effects of scales that are not resolved in implicitly filtered LES, a reconstruction method is proposed that combines sub-grid projection and energy-similarity to enrich unresolved scales. With this method, closure models are developed for turbulent scalar fluxes and turbulence–chemistry interaction that are intrinsically consistent with the LES formulation. These closure models are evaluated in application to a piloted turbulent jet flame with inhomogeneous inlet composition, in which combustion is represented by a two-scalar manifold model. The RDM-formulation is benchmarked against simulations obtained using a presumed PDF method and eddy diffusivity closure model. In partially-premixed flame regions, it is observed that RDM improves the prediction of turbulent mixing, and faster grid convergence is observed for results with RDM compared to simulations employing a presumed PDF method.
Polarized Soft X-ray Scattering Reveals Chain Orientation within Nanoscale Polymer Domains
Fully conjugated donor-acceptor block copolymers can serve as the active layer in organic photovoltaics and other organic electronic devices. Additionally, self-assembly into periodic domains and crystallization of the constituent blocks are crucial to enable control of the multiscale structure and consequently electronic properties. Resonant soft X-ray scattering (RSoXS) is an invaluable tool to characterize such materials, where tuning the X-ray energy and polarization reveals molecular orientation and domain spacing. In this work, anisotropic soft X-ray scattering data reveal the type and degree of orientation within conjugated block copolymers composed of poly(3-hexylthiophene-2,5-diyl) and various push-pull copolymers. The maximum anisotropy is observed at the scattering vector corresponding to the spacing between block copolymer domains, which scales with the end-to-end distance of the blocks, as expected. Furthermore, the anisotropy in RSoXS data reveals that the crystalline P3HT blocks orient, on average, parallel or nearly parallel to the block copolymer interface; the average tilt angle between P3HT chains and domain interfaces can be extracted from the dependence of the anisotropy with polar angle. We interpret this angle to correspond to the average tilt of rings in the unit cell, potentially within a chiral mesostructure. Results are corroborated with scattering calculations based on simple model structures.
Assessing the mechanisms governing the daytime evolution of marine stratocumulus using large‐eddy simulation
Large‐eddy simulation (LES) output for a case of thin stratocumulus off the coast of California is examined in a mixed‐layer analysis framework to identify the specific mechanisms responsible for governing the evolution of the cloud system. An equation for cloud‐base height tendency isolates the individual cloud‐modulating mechanisms that control the evolution of boundary‐layer liquid‐water static energy ( S l ) and total water mixing ratio ( q T ). With a suitable spin‐up procedure, the control simulation performs admirably compared with observed estimates of liquid water content, vertical velocity variance, and radiative fluxes sampled during an aircraft field campaign. Investigation of the cloud response to various environmental forcing scenarios was addressed through a suite of sensitivity simulations, including variations in subsidence velocity, surface fluxes, wind shear near the inversion, and radiative forcing. In the control simulation, rising cloud‐base tendencies are associated with entrainment warming/drying and short‐wave absorption, whereas lowering cloud‐base tendencies are driven by long‐wave cooling. Even in the presence of substantial afternoon solar heating, entrainment fluxes remained active. The thin cloud demonstrated unexpected resiliency, with mixed‐layer analysis indicating that, as the short‐wave flux decreases later in the afternoon, the relative contribution of long‐wave cooling often becomes large enough to offset entrainment warming/drying and result in a reversal of cloud‐base tendency. The evolution of cloud‐base tendency is found to be insensitive to the net radiative flux divergence for most of the simulations (liquid water path ranging from ~10–50 g/m 2 ). Error analysis in comparison with LES S l and q T budgets suggests that our method of entrainment flux calculation could be improved by a more complete understanding of entrainment‐layer physics.
The Influence of Fe substitution into LaCoO 3 -Electrocatalysts on Oxygen-Reduction Activity
The development of commercially friendly and stable catalysts for oxygen reduction reaction (ORR) is critical for many energy conversion systems such as fuel cells and metal-air batteries. Many Co-based perovskite oxides such as LaCoO 3 have been discovered as the stable and active ORR catalysts, which can be good candidates to replace platinum (Pt). Although researchers have tried substituting various transition metals into the Co-based perovskite catalysts to improve the ORR performance, the influence of substitution on the ORR. mechanism is rarely studied. In this paper, we explore the evolution of ORR mechanism after substituting Fe into LaCoO 3 , using the combination of X-ray photoelectron spectroscopy, high-resolution X-ray microscopy, X-ray diffraction, surface-sensitive soft X-ray absorption spectroscopy characterization, and electrochemical tests. We observed enhanced catalytic activities and increased electron transfer numbers during the ORR in Co-rich perovskite, which are attributed to the optimized e(g) filling numbers and the stronger hybridization of transition metal 3d and oxygen 2p bands. The discoveries in this paper provide deep insights into the ORR catalysis mechanism on metal oxides and new guidelines for the design of Pt-free ORR catalysts.
Dry-Sliding Tribological Properties of TiAl Alloys and Ti{sub 2}AlN/TiAl Composites at High Temperature
The dry-sliding tribological properties of TiAl alloy and its composite Ti{sub 2}AlN/TiAl were investigated comparatively in the temperature range of 25-800 °C. The wear test results showed the wear resistance of TiAl alloy and Ti{sub 2}AlN/TiAl composite from 25 to 400 °C was poor, but it improved obviously when temperature was above 600 °C. Also, 15 vol.% incorporation of Ti{sub 2}AlN particles was beneficial to improve the friction and wear properties of TiAl. Protective oxide layer generated on the wear surface of 15 vol.% Ti{sub 2}AlN/TiAl composite from 25 to 400 °C, hence, the wear resistance improved. Ti{sub 2}AlN particles played a load-carrying role and inhabited the delamination of enamel layer effectively when the temperature was above 800 °C. Overall, Ti{sub 2}AlN particles which acted as hard spots changed the state of wear surface and further provided a second phase strengthening effect, which resulted in the difference in tribological behaviors between TiAl alloy and its composite.
Conjugated Block Copolymers as Model Systems to Examine Mechanisms of Charge Generation in Donor–Acceptor Materials
Abstract Fully conjugated donor–acceptor block copolymers are established as model systems to elucidate fundamental mechanisms of photocurrent generation in organic photovoltaics. Using analysis of steady‐state photoluminescence quenching, exciton dissociation to a charge transfer state within individual block copolymer chains is quantified. By making a small adjustment to the conjugated backbone, the electronic properties are altered enough to disrupt charge transfer almost entirely. Strong intermolecular coupling of the electron donor is introduced by synthesizing block copolymer nanoparticles. Transient absorption spectroscopy is used to monitor charge generation in block copolymer isolated chains and nanoparticles. While efficient charge transfer is observed in isolated chains, there is no indication of complete charge separation. In the nanoparticles, long‐lived polarons are observed as early as ≈15 ns. Thus, aggregation of electron donors can facilitate efficient charge generation.