Engineering Papers⌕ Search

Engineering topics

Wang, L

Publications and source records attributed to Wang, L.

At least 73 records · Page 4

Gyrokinetics for high-frequency modes in tokamaks

Gyrokinetics for high-frequency modes in tokamaks is developed. It is found that the breakdown of the invariants by perturbed electromagnetic fields drives microinstability. The obtained diamagnetic frequency, {omega}{sup *}, is proportional to only the toroidal mode number rather than transverse mode numbers. Therefore, there is no nonadiabatic drive for axisymmetrical modes in gyrokinetics. Meanwhile, the conventional eikonal Ansatz breaks down for the axisymmetrical modes. The ion drift-cyclotron instability discovered in a mirror machine is found for the first time in the toroidal system. The growth rates are proportional to {rho}{sub i}/L{sub n}, and the slope changes with magnetic curvature. In spherical torus, where magnetic curvature is greater than that of traditional tokamaks, instability poses a potential danger to such devices.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

A PHYSICAL MODEL FOR SN 2001ay, A NORMAL, BRIGHT, EXTREMELY SLOW DECLINING TYPE Ia SUPERNOVA

We present a study of the peculiar Type Ia supernova 2001ay (SN 2001ay). The defining features of its peculiarity are high velocity, broad lines, and a fast rising light curve, combined with the slowest known rate of decline. It is one magnitude dimmer than would be predicted from its observed {Delta}m{sub 15}, and shows broad spectral features. We base our analysis on detailed calculations for the explosion, light curves, and spectra. We demonstrate that consistency is key for both validating the models and probing the underlying physics. We show that this SN can be understood within the physics underlying the {Delta}m{sub 15} relation, and in the framework of pulsating delayed detonation models originating from a Chandrasekhar mass, M{sub Ch}, white dwarf, but with a progenitor core composed of 80% carbon. We suggest a possible scenario for stellar evolution which leads to such a progenitor. We show that the unusual light curve decline can be understood with the same physics as has been used to understand the {Delta}m{sub 15} relation for normal SNe Ia. The decline relation can be explained by a combination of the temperature dependence of the opacity and excess or deficit of the peak luminosity, {alpha}, measured relative to the instantaneous rate of radiative decay energy generation. What differentiates SN 2001ay from normal SNe Ia is a higher explosion energy which leads to a shift of the {sup 56}Ni distribution toward higher velocity and {alpha} < 1. This result is responsible for the fast rise and slow decline. We define a class of SN 2001ay-like SNe Ia, which will show an anti-Phillips relation.

79 ASTRONOMY AND ASTROPHYSICS↗

HerMES: A STATISTICAL MEASUREMENT OF THE REDSHIFT DISTRIBUTION OF HERSCHEL-SPIRE SOURCES USING THE CROSS-CORRELATION TECHNIQUE

The wide-area imaging surveys with the Herschel Space Observatory at submillimeter (sub-mm) wavelengths have now resulted in catalogs of the order of one-hundred-thousand dusty, starburst galaxies. These galaxies capture an important phase of galaxy formation and evolution, but, unfortunately, the redshift distribution of these galaxies, N(z), is still mostly uncertain due to limitations associated with counterpart identification at optical wavelengths and spectroscopic follow-up. We make a statistical estimate of N(z) using a clustering analysis of sub-mm galaxies detected at each of 250, 350 and 500 {mu}m from the Herschel Multi-tiered Extragalactic Survey centered on the Booetes field. We cross-correlate Herschel galaxies against galaxy samples at optical and near-IR wavelengths from the Sloan Digital Sky Survey, the NOAO Deep Wide Field Survey, and the Spitzer Deep Wide Field Survey. We create optical and near-IR galaxy samples based on their photometric or spectroscopic redshift distributions and test the accuracy of those redshift distributions with similar galaxy samples defined with catalogs from the Cosmological Evolution Survey (COSMOS), which has superior spectroscopic coverage. We model the clustering auto- and cross-correlations of Herschel and optical/IR galaxy samples to estimate N(z) and clustering bias factors. The S{sub 350} > 20 mJy galaxies have a bias factor varying with redshift as b(z) = 1.0{sup +1.0}{sub -0.5}(1 + z){sup 1.2{sup +{sup 0{sup .{sup 3{sub -}{sub -}{sub 0}{sub .}{sub 7}}}}}}. This bias and the redshift dependence is broadly in agreement with galaxies that occupy dark matter halos of mass in the range of 10{sup 12} to 10{sup 13} M{sub Sun }. We find that galaxy selections in all three Spectral and Photometric Imaging Receiver (SPIRE) bands share a similar average redshift, with (z) = 1.8 {+-} 0.2 for 250 {mu}m selected samples, and (z) = 1.9 {+-} 0.2 for both 350 and 500 {mu}m samples, while their distributions behave differently. For 250 {mu}m selected galaxies we find the a larger number of sources with z {<=} 1 when compared with the subsequent two SPIRE bands, with 350 and 500 {mu}m selected SPIRE samples having peaks in N(z) at progressively higher redshifts. We compare our clustering-based N(z) results to sub-mm galaxy model predictions in the literature, and with an estimate of N(z) using a stacking analysis of COSMOS 24 {mu}m detections.

79 ASTRONOMY AND ASTROPHYSICS↗

The comprehensive phase evolution for Bi[subscript 2]Te[subscript 3] topological compound as function of pressure

The recently discovered three-dimensional topological insulator Bi{sub 2}Te{sub 3} is studied as function of pressure in terms of crystal structures, resistance, and Hall coefficient. The superconductivity is found in phase I (ambient phase) Bi{sub 2}Te{sub 3} with T{sub c}-3 K, which is related to the topological features. The evolution of crystal structure with pressure is investigated by high pressure synchrotron radiation experiments that reveal structural transitions occurring at about 8 GPa, 13 GPa, and 16 GPa, respectively. Furthermore, the high pressure phases of Bi{sub 2}Te{sub 3} are also superconducting but with much higher T{sub c}-8 K. The superconducting transitions are compared with those for Bi, Te elements. A global phase diagram of Bi{sub 2}Te{sub 3} as function of pressure up to 30 GPa is obtained.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Pressure tunes electrical resistivity by four orders of magnitude in amorphous Ge[subscript 2]Sb[subscript 2]Te[subscript 5] phase-change memory alloy

Ge-Sb-Te-based phase-change memory is one of the most promising candidates to succeed the current flash memories. The application of phase-change materials for data storage and memory devices takes advantage of the fast phase transition (on the order of nanoseconds) and the large property contrasts (e.g., several orders of magnitude difference in electrical resistivity) between the amorphous and the crystalline states. Despite the importance of Ge-Sb-Te alloys and the intense research they have received, the possible phases in the temperature-pressure diagram, as well as the corresponding structure-property correlations, remain to be systematically explored. In this study, by subjecting the amorphous Ge{sub 2}Sb{sub 2}Te{sub 5} (a-GST) to hydrostatic-like pressure (P), the thermodynamic variable alternative to temperature, we are able to tune its electrical resistivity by several orders of magnitude, similar to the resistivity contrast corresponding to the usually investigated amorphous-to-crystalline (a-GST to rock-salt GST) transition used in current phase-change memories. In particular, the electrical resistivity drops precipitously in the P = 0 to 8 GPa regime. A prominent structural signature representing the underlying evolution in atomic arrangements and bonding in this pressure regime, as revealed by the ab initio molecular dynamics simulations, is the reduction of low-electron-density regions, which contributes to the narrowing of band gap and delocalization of trapped electrons. At P > 8 GPa, we have observed major changes of the average local structures (bond angle and coordination numbers), gradually transforming the a-GST into a high-density, metallic-like state. This high-pressure glass is characterized by local motifs that bear similarities to the body-centered-cubic GST (bcc-GST) it eventually crystallizes into at 28 GPa, and hence represents a bcc-type polyamorph of a-GST.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗

Anomalous phase change characteristics in Fe-Te materials

Phase change materials have become significantly attractive due to its unique characteristics for its extensive applications. In this paper, a kind of phase change material, which consists of Fe and Te components, is developed. The crystallization temperature of the Fe-Te materials is 180 deg. C for Fe{sub 1.19}Te and can be adjusted by the Fe/Te ratio. High-speed phase change in the Fe-Te materials has been demonstrated by nanosecond laser irradiation. Comparing to conventional phase change materials, the Fe-Te materials exhibit an anomalous optical property that has higher reflectivity at amorphous than crystalline state, which is useful for data storage design.

36 MATERIALS SCIENCE↗

Large Magnetothermopower Effect in Dirac Materials (Sr/Ca)MnBi2

We report temperature and magnetic field dependence of the thermal transport properties in single crystals of (Sr/Ca)MnBi2 with linear energy dispersion. In SrMnBi2 thermopower is positive, indicating hole-type carriers and the magnetic field enhances the thermopower significantly. The maximum change of thermopower is about 1600% in 9 T field and at 10 K. A negative thermopower is observed in CaMnBi2 with dominant electron-type carriers, and, in contrast, the magnetic field suppresses the absolute value of thermopower. First-principle band structure shows that the chemical potential is close to the Dirac-cone-like points in linear bands. The magnetic field suppresses the apparent Hall carrier density of CaMnBi2 below 50 K. The large magnetothermopower effect in (Sr/Ca)MnBi2 is attributed to the magnetic field shift of chemical potential.

36 MATERIALS SCIENCE↗

Pressure effects on phase equilibria and solid solubility in MgO-Y2O3 nanocomposites

We study the temperature and pressure dependence of phase evolution in the 0.5MgO-0.5Y{sub 2}O{sub 3} nanocomposite system using a diamond anvil apparatus in conjunction with in situ synchrotron energy dispersive x-ray diffraction at 7 GPa hydrostatic pressure. At (298 K, 7.0 GPa), structural transformations in the Y{sub 2}O{sub 3} phase are observed, giving rise to the co-existence of its cubic, hexagonal, and monoclinic polymorphs together with cubic MgO. An increase in temperature to 1273 K causes the crystallinity of the Y{sub 2}O{sub 3} hexagonal and monoclinic phases to increase. Isothermal and isobaric hold at (1273 K, 7.0 GPa) for 60 min results in yttrium dissolution in cubic MgO, causing {approx}1.0% expansive volumetric lattice strain despite the large differences in the ionic radii of the cations. Cooling the nanocomposite to (298 K, 0 GPa) after a 60 min soak yields four phase co-existence among cubic MgO and cubic, hexagonal, and monoclinic Y{sub 2}O{sub 3}. The residual MgO unit cell volume expansion is 0.69% at 298 K, indicating solid solution formation at room temperature despite large differences in the ionic radii of Mg{sup 2+} and Y{sup 3+}. The macroscopic shrinkage due to densification is 3% by volume. Thermodynamic considerations suggest that the relative molar partial volume of Y{sup 3+} in MgO is a negative quantity, indicating that the partial molar volume of Y{sup 3+} in the solid solution is smaller than its molar volume in the pure state. Aging of the nanocomposites for 240 h does not change the observed 4 phase co-existence. We propose a crystallographic model in which the observed volumetric expansion of the MgO unit cell is primarily attributed to two hydrostatic expansive strain components accompanying solid solution formation: (i) Coulomb repulsion among O{sup 2-} ions in the immediate vicinity of Mg{sup 2+} vacancies, and (ii) misfit strain due to differences in ionic radii upon Y{sup 3+} substitution on Mg{sup 2+} sites.

36 MATERIALS SCIENCE↗

The Structural Transition Behavior of CdSe/ZnS Core/shell Quantum Dots under High Pressure

The structural phase transition of CdSe/ZnS core/shell quantum dots (QDs) has been studied by in situ angle-dispersive X-ray diffraction under high pressure up to 53.6?GPa. The CdSe core transforms from wurtzite to rock-salt structure near 6.3?GPa and then to Cmcm or distorted Cmcm structure probably occurs at 45.1?GPa which has not been observed in CdSe nanomaterials before. The critical pressure from wurtzite to rock-salt and the bulk modulus of rock-salt phase are much higher than those for bulky and uncapped nanoparticle CdSe. The released sample can be kept in rock-salt phase for a certain time, verified by photoluminescence (PL) spectra, quite different from the reversible transition for pure CdSe. A reasonable interpretation of the experimental phenomena is given by comparing the bulk modulus of the core and shell and studying the stress sate of the core after decompression. Our study suggests that capping a hard shell is an effective approach to quench the high pressure phase of nanomaterial with a reversible phase transition.

77 NANOSCIENCE AND NANOTECHNOLOGY↗

Thermal Equation of State of CaIrO3 Post-perovskite

The pressure-volume-temperature (P-V-T) relation of CaIrO{sub 3} post-perovskite (ppv) was measured at pressures and temperatures up to 8.6 GPa and 1,273 K, respectively, with energy-dispersive synchrotron X-ray diffraction using a DIA-type, cubic-anvil apparatus (SAM85). Unit-cell dimensions were derived from the Le Bail full profile refinement technique, and the results were fitted using the third-order Birth-Murnaghan equation of state. The derived bulk modulus K{sub T0} at ambient pressure and temperature is 168.3 {+-} 7.1 GPa with a pressure derivative K{sub T0} = 5.4 {+-} 0.7. All of the high temperature data, combined with previous experimental data, are fitted using the high-temperature Birch-Murnaghan equation of state, the thermal pressure approach, and the Mie-Grueneisen-Debye formalism. The refined thermoelastic parameters for CaIrO{sub 3} ppv are: temperature derivative of bulk modulus ({partial_derivative}K{sub T}/{partial_derivative}T){sub P} = -0.038 {+-} 0.011 GPa K{sup -1}, {alpha}K{sub T} = 0.0039 {+-} 0.0001 GPa K{sup -1}, ({partial_derivative}K{sub T}/{partial_derivative}T){sub V} = -0.012 {+-} 0.002 GPa K{sup -1}, and ({partial_derivative}{sup 2}P/{partial_derivative}T{sup 2}){sub V} = 1.9 {+-} 0.3 x 10{sup -6} GPa{sup 2} K{sup -2}. Using the Mie-Grueneisen-Debye formalism, we obtain Grueneisen parameter {gamma}{sub 0} = 0.92 {+-} 0.01 and its volume dependence q = 3.4 {+-} 0.6. The systematic variation of bulk moduli for several oxide post-perovskites can be described approximately by the relationship K{sub T0} = 5406.0/V(molar) + 5.9 GPa.

58 GEOSCIENCES↗

Comparative Studies of Constitutive Properties of nanocrystalline and Bulk Iron During Compressive Deformation

We present a comparative study of the mechanical properties of body-centered cubic nanocrystalline iron (nano-Fe) and microcrystalline iron (micro-Fe) by in situ high-pressure synchrotron X-ray diffraction under triaxial compression. For nano-Fe with a starting high dislocation density of 10{sup 16} m{sup -2}, the peak broadening is almost reversible upon unloading from 8.6 GPa to atmospheric pressure, indicating that no additional dislocations are built up during compressive deformation inside grains, at grain boundaries or twin boundaries. Furthermore, an orientation-dependent surface strain is found to be stored in the surface layer of the bcc nano-Fe, which is in agreement with the core-shell model of the nanocrystals. For micro-Fe, a significant and continuous peak sharpening and the associated work softening were observed after the sample is yielded at pressures above 2.0 GPa, which can be presumably attributed to a pressureinduced dislocation annihilation. This finding/interpretation supports the hypothesis that the annihilation of dislocations is one of the dominant mechanisms underlying the plastic energy dissipation. The determined yield strength of 2.0 GPa for nano-Fe is more than 15 times higher than that for micro-Fe (0.13 GPa), indicating that the nanoscale grain-size reduction is a substantially more effective strengthening mechanism than conventional carbon infusion in iron.

36 MATERIALS SCIENCE↗