Engineering Papers⌕ Search

Engineering topics

Wang, J

Publications and source records attributed to Wang, J.

322 records · Page 18

Isotope Effect on Band Gap and Radiative Transitions Properties of Boron Nitride Nanotubes

We have carried out an isotope study on the band gap and radiative transition spectra of boron nitride nanotubes (BNNTs) using both experimental and theoretical approaches. The direct band gap of BNNTs was determined at 5.38 eV, independent of the nanotube size and isotope substitution, by cathodoluminescences (CL) spectra. At lower energies, several radiative transitions were observed, and an isotope effect was revealed. In particular, we confirmed that the rich CL spectra between 3.0 and 4.2 eV reflect a phonon-electron coupling mechanism, which is characterized by a radiative transition at 4.09 eV. The frequency red shift and peak broadening due to isotopic effect have been observed. Our Fourier transform infrared spectra and density functional theory calculations suggest that those radiative transitions in BNNTs could be generated by a replacement of some nitrogen atoms with oxygen.

77 NANOSCIENCE AND NANOTECHNOLOGY↗

From Nanorings to Nanodots by Patteringin with Block Copolymers

We demonstrate three different transfer patterns that can be achieved by use of a surface reconstructed block copolymer film where metal is evaporated onto the surface of the film, providing the contrast. Thin films of diblock copolymers having cylindrical microdomains oriented normal to the surface with long-range lateral order were used. Solvent reconstruction of the film, followed by a glancing angle metal evaporation and thermal annealing, led to three different decorations of the films with gold. These films were used as masks for pattern transfer of pores, columns, and rings to underlying substrate with high fidelity.

77 NANOSCIENCE AND NANOTECHNOLOGY↗

A Simple Route to Highly Oriented and Ordered Nanoporous Block Copolymer Templates

Controlling the orientation and lateral ordering of the block copolymer microdomains is essential to their use as templates and scaffolds for the fabrication of nanostructured materials. In addition, a process must be robust, simple to implement, and rapid, and should not introduce disruptive processing steps that would impede their use. Here, we describe thin films of poly(styrene-b-4-vinylpyridine) (PS-b-P4VP) diblock copolymers, spin-coated from mixed solvents that show highly oriented, cylindrical microdomains with a high degree of order on a wide range of substrates, including silicon oxide, polystyrene, germanium, polyimide, and poly(butylene terephthalate). In addition, the preferential solvation of the P4VP block with an alcohol caused a surface reconstruction that resulted in the formation of a nanoporous film upon drying. The evaporation of gold onto the reconstructed films produced thermally stable and reactive ion etching resistant films.

36 MATERIALS SCIENCE↗

A Regulatable Switch Mediates Self Association in an Immunoglobulin Fold

beta-2 microglobulin (beta2m) is a globular protein that self-associates into fibrillar amyloid deposits in patients undergoing hemodialysis therapy. Formation of these beta-sheet-rich assemblies is a fundamental property of polypeptides that can be triggered by diverse conditions. For beta2m, oligomerization into pre-amyloidogenic states occurs in specific response to coordination by Cu2+. Here we report the basis for this self-association at atomic resolution. Metal is not a direct participant in the molecular interface. Rather, binding results in distal alterations enabling the formation of two new surfaces. These interact to form a closed hexameric species. The origins of this include isomerization of a buried and conserved cis-proline previously implicated in the beta2m aggregation pathway. The consequences of this isomerization are evident and reveal a molecular basis for the conversion of this robust monomeric protein into an amyloid-competent state.

59 BASIC BIOLOGICAL SCIENCES↗

Full-field hard x-ray microscopy below 30 nm : a challenging nanofabrication achievement.

The fabrication of devices to focus hard x-rays is one of the most difficult--and important--challenges in nanotechnology. Here we show that Fresnel zone plates combining 30 nm external zones and a high aspect ratio finally bring hard x-ray microscopy beyond the 30 nm Rayleigh spatial resolution level and measurable spatial frequencies down to 20-23 nm feature size. After presenting the overall nanofabrication process and the characterization test results, we discuss the potential research impact of these resolution levels.

77 NANOSCIENCE AND NANOTECHNOLOGY↗

Structural Behaviors of Cubic Gd2O3 at High Pressures

An irreversible structural transformation from the cubic phase to a hexagonal high-pressure phase was verified in Gd2O3 between 7.0 and 15 GPa. The compressibility and bond distances of both phases were determined by the refinement of the x-ray diffraction data. The high-pressure phase of Gd2O3 is 9.2% denser than the cubic phase at 7 GPa. After release of pressure, the high-pressure phase transformed to a monoclinic structure. The pressure-induced phase transition from the monoclinic to the hexagonal phase is reversible. Unlike the case at atmospheric pressure, the hexagonal phase was found to transform to the monoclinic phase by increase of temperature at high pressures. The lattice potential energies and electronic density of states of the cubic, monoclinic, and hexagonal high-pressure phases of Gd2O3 were calculated from the known structural models with density-functional method. The observed phase stability, transition pressure, and volume change are well explained by theoretical calculations.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Phase Stability and Pressure Dependence of Defect Formation in Gd2Ti2O7 and Gd2Zr2O7 Pyrochlore

We report dramatically different behaviors between isostructural Gd2Ti2O7 and Gd2Zr2O7 pyrochlore at pressures up to 44 GPa, in which the substitution of Ti for Zr significantly increases structural stability. Upon release of pressure, the Gd2Ti2O7 becomes amorphous. In contrast, the high-pressure phase of Gd2Zr2O7 transforms to a disordered defect-fluorite structure. First-principle calculations for both compositions revealed that the response of pyrochlore to high pressure is controlled by the intrinsic energetics of defect formation.

36 MATERIALS SCIENCE↗

A twelve-analyzer detector system for high-resolution powder diffraction.

A dedicated high-resolution high-throughput X-ray powder diffraction beamline has been constructed at the Advanced Photon Source (APS). In order to achieve the goals of both high resolution and high throughput in a powder instrument, a multi-analyzer detector system is required. The design and performance of the 12-analyzer detector system installed on the powder diffractometer at the 11-BM beamline of APS are presented.

43 PARTICLE ACCELERATORS↗

A linear MOSFET regulation system to improve the performance of the booster-ramping power supplies at the APS.

The APS booster ring uses ramping power supplies to power the sextupole, quadrupole, and dipole magnets as the beam energy ramps up linearly to 7 GeV. Due to the circuit topology used, those supplies are unable to follow the linear ramp to the desired accuracy. The best regulation achieved is 0.5% while 0.1 % is desired. In addition to the unsatisfying regulation, those supplies are sensitive to AC line perturbations and are not able to reject AC line noises higher than a few tens of Hertz. To improve the performance, a linear MOSFET regulation system using paralleled MOSFET devices in series with the power supply is proposed. The system uses a real-time current feedback loop to force the MOSFETs to work in the linear operation mode. By using this linear MOSFET regulator, the voltage drop on MOSFETs, and hence the voltage imposed on magnets, can be regulated very quickly. As a result, the regulation of the magnet current can be improved significantly. Experiments and simulation have been performed to verify the proposed method. Results show that, with the linear regulator, the current regulation can be improved to better than 0.1%. Because of the high bandwidth of the linear regulator, it can reduce the harmonic content in the output current as well as reject the AC line disturbance.

43 PARTICLE ACCELERATORS↗

A linear MOSFET regulator for improving performance of the booster ramping power supplies at the APS.

The APS booster ring uses ramping power supplies to power the sextupole, quadrupole, and dipole magnets as the beam energy ramps up linearly to 7 GeV. Due to the circuit topology used, those supplies are unable to follow the linear ramp to the desired accuracy. The best regulation achieved is 0.25% while 0.1% is desired. In addition to the unsatisfying regulation, those supplies are sensitive to AC line perturbation and are not able to reject AC line noises of more than a few tens of hertz. To improve the performance, a linear MOSFET regulation system using paralleled MOSFET devices in series with the power supply is proposed. The system uses a realtime current feedback loop to force the MOSFETs to work in the linear operation mode. By using this linear MOSFET regulator, the voltage drop on MOSFETs, and hence the voltage imposed on magnets, can be regulated very quickly. As a result, the regulation of the magnet current can be improved significantly. So far the simulation results show that with the linear regulator, the current regulation can be improved to better than 0.1%. Because of the high bandwidth of the linear regulator, it can reduce the harmonic content in the output current as well as reject the AC line disturbance. This paper discusses the circuit topology, the regulation method, and the simulation results.

43 PARTICLE ACCELERATORS↗

Market power analysis in the EEX electricity market : an agent-based simulation approach.

In this paper, an agent-based modeling and simulation (ABMS) approach is used to model the German wholesale electricity market. The spot market prices in the European Energy Exchange (EEX) are studied as the wholesale market prices. Each participant in the market is modeled as an individual rationality-bounded agent whose objective is to maximize its own profit. By simulating the market clearing process, the interaction among agents is captured. The market clearing price formed by agentspsila production cost bidding is regarded as the reference marginal cost. The gap between the marginal cost and the real market price is measured as an indicator of possible market power exertion. Various bidding strategies such as physical withholding and economic withholding can be simulated to represent strategic bidding behaviors of the market participants. The preliminary simulation results show that some generation companies (GenCos) are in the position of exerting market power by strategic bidding.

24 POWER TRANSMISSION AND DISTRIBUTION↗

Fractional ({Dirac_h}/2{pi}) Scaling for Quantum Kicked Rotors without Cantori

Previous studies of quantum delta-kicked rotors have found momentum probability distributions with a typical width (localization length L) characterized by fractional ({Dirac_h}/2{pi}) scaling; i.e., L{approx}({Dirac_h}/2{pi}){sup 2/3} in regimes and phase-space regions close to ''golden-ratio'' cantori. In contrast, in typical chaotic regimes, the scaling is integer, L{approx}({Dirac_h}/2{pi}){sup -1}. Here we consider a generic variant of the kicked rotor, the random-pair-kicked particle, obtained by randomizing the phases every second kick; it has no Kol'mogorov-Arnol'd-Moser mixed-phase-space structures, such as golden-ratio cantori, at all. Our unexpected finding is that, over comparable phase-space regions, it also has fractional scaling, but L{approx}({Dirac_h}/2{pi}){sup -2/3}. A semiclassical analysis indicates that the ({Dirac_h}/2{pi}){sup 2/3} scaling here is of quantum origin and is not a signature of classical cantori.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Optical-field-ionization collisional-excitation x-ray lasers with an optically preformed plasma waveguide

Optical-field-ionization x-ray lasers in an optically preformed plasma waveguide for pure xenon, krypton, and argon gases, respectively, are achieved. In addition to the 46.9 nm main lasing line for Ne-like argon, the 45.1 and 46.5 nm lasing lines are also observed, indicative of the strong enhancement effect and the large gas density in the plasma waveguide. With this technique multispecies parallel x-ray lasing is also demonstrated in a Kr-Ar mixed-gas waveguide. Extensive experimental results including the pump-energy dependence, the density dependence, and the effects of parameters that control the waveguide fabrication are reported and discussed.

74 ATOMIC AND MOLECULAR PHYSICS↗

The leaching characteristics of selenium from coal fly ashes

The leaching characteristics of selenium from several bituminous and subbituminous coal fly ashes under different pH conditions were investigated using batch methods. Results indicated that pH had a significant effect on selenium leaching from bituminous coal ash. The minimum selenium leaching occurred in the pH range between 3 and 4, while the maximum selenium leaching occurred at pH 12. The release of selenium from subbituminous coal ashes was very low for the entire experimental pH range, possibly due to the high content of calcium which can form hydration or precipitation products as a sink for selenium. The adsorption results for different selenium species indicated that Se(VI) was hardly adsorbable on either bituminous coal ashes or subbitumminous coal ashes at any pH. However, Se(I) was highly adsorbed by bituminous coal ashes under acidic pH conditions and was mostly removed by subbitumminous coal ashes across the entire pH range. This result suggests that the majority of selenium released from the tested fly ashes was Se(IV). A speciation-based model was developed to simulate the adsorption of Se(IV) on bituminous coal fly ash, and the pH-independent adsorption constants of HSeO{sup 3-} and SeO{sub 3}{sup 2-} were determined. The modeling approach is useful for understanding and predicting the release process of selenium from fly ash.

01 COAL, LIGNITE, AND PEAT↗

Anthropogenic radionuclides in the environment

Studies of radionuclides in the environment have entered a new era with the renaissance of nuclear energy and associated fuel reprocessing, geological disposal of high-level nuclear wastes, and concerns about national security with respect to nuclear non-proliferation. This work presents an overview of anthropogenic radionuclide contamination in the environment, as well as the salient geochemical behavior of important radionuclides. We first discuss the following major anthropogenic sources and current development that contribute to the radionuclide contamination of the environment: (1) nuclear weapons program; (2) nuclear weapons testing; (3) nuclear power plants; (4) commercial fuel reprocessing; (5) geological repository of high-level nuclear wastes, and (6) nuclear accidents. Then, we summarize the geochemical behavior for radionuclides {sup 99}Tc, {sup 129}I, and {sup 237}Np, because of their complex geochemical behavior, long half-lives, and presumably high mobility in the environment. Biogeochemical cycling and environment risk assessment must take into account speciation of these redox-sensitive radionuclides.

12 MANAGEMENT OF RADIOACTIVE AND NON-RADIOACTIVE W↗

Results of the SLAC LCLS Gun High-Power RF Tests

The beam quality and operational requirements for the Linac Coherent Light Source (LCLS) currently being constructed at SLAC are exceptional, requiring the design of a new RF photocathode gun for the electron source. Based on operational experience at SLAC's GTF and SDL and ATF at BNL as well as other laboratories, the 1.6cell s-band (2856MHz) gun was chosen to be the best electron source for the LCLS, however a significant redesign was necessary to achieve the challenging parameters. Detailed 3-D analysis and design was used to produce near-perfect rotationally symmetric rf fields to achieve the emittance requirement. In addition, the thermo-mechanical design allows the gun to operate at 120Hz and a 140MV/m cathode field, or to an average power dissipation of 4kW. Both average and pulsed heating issues are addressed in the LCLS gun design. The first LCLS gun is now fabricated and has been operated with high-power RF. The results of these high-power tests are presented and discussed.

43 PARTICLE ACCELERATORS↗