Engineering Papers⌕ Search

Engineering topics

Wang, J

Publications and source records attributed to Wang, J.

At least 307 records · Page 17

A dedicated powder diffraction beamline at the Advanced Photon Source: Commissioning and early operational results

A new dedicated high-resolution high-throughput powder diffraction beamline has been built, fully commissioned, and opened to general users at the Advanced Photon Source. The optical design and commissioning results are presented. Beamline performance was examined using a mixture of the NIST Si and Al{sub 2}O{sub 3} standard reference materials, as well as the LaB6 line-shape standard. Instrumental resolution as high as 1.7x10{sup -4} ({delta}Q/Q) was observed.

46 INSTRUMENTATION RELATED TO NUCLEAR SCIENCE AND ↗

Electrical and magnetic properties of multiferroic BiFeO{sub 3}/CoFe{sub 2}O{sub 4} heterostructure

To realize a magnetoelectric heterostructure with desired ferroelectric and magnetic properties, a heterostructure consisting of BiFeO{sub 3} (BFO)/CoFe{sub 2}O{sub 4} (CFO) layers has been grown on SrRuO{sub 3} buffered Pt/TiO{sub 2}/SiO{sub 2}/Si substrate by rf sputtering. X-ray diffraction shows that the BFO and CFO phases have been successfully retained in the heterostructure. Grain growth of the CFO phase was enhanced on top of the BFO layer. The heterostructure exhibits both ferroelectric and magnetic behaviors at room temperature. Its remanent polarization (2P{sub r}) is measured to be {approx}146 {mu}C/cm{sup 2} and the coercive field (2E{sub c}) is {approx}1803 kV/cm, while the saturation magnetization (2M{sub s}) is 140 emu/cm{sup 3} and the coercive field (2H{sub c}) is {approx}2.7 kOe. The leakage current behavior of the heterostructure is consistent with space charge limited conduction mechanism. While the heterostructure is promising for multiferroic behavior, it would be necessary to control the structural defects such that the leakage is minimized.

36 MATERIALS SCIENCE↗

Comparative proteogenomics: combining mass spectrometry and comparative genomics to analyze multiple genomes

While bacterial genome annotations have significantly improved in recent years, techniques for bacterial proteome annotation (including post-translational chemical modifications, signal peptides, proteolytic events, etc.) are still in their infancy. At the same time, the number of sequenced bacterial genomes is rising sharply, far outpacing our ability to validate the predicted genes, let alone annotate bacterial proteomes. In this study, we use tandem mass spectrometry (MS/MS) to annotate the proteome of Shewanella oneidensis MR-1, an important microbe for bioremediation. In particular, we provide the first comprehensive map of post-translational modifications in a bacterial genome, including a large number of chemical modifications, signal peptide cleavages and cleavage of N-terminal methionine residues. We also detect multiple genes that were missed or assigned incorrect start positions by gene prediction programs and suggest corrections to improve the gene annotation. This study demonstrates that complementing every genome sequencing project by an MS/MS project would significantly improve both genome and proteome annotations for a reasonable cost.

59 BASIC BIOLOGICAL SCIENCES↗

A simple biphasic route to water soluble dithiocarbamate functionalized quantum dots

Hydrophobic trioctylphosphine oxide-functionalized CdSe quantum dots (CdSe-TOPO QDs) were transferred from organic solvent to aqueous solution via a simple yet novel biphasic ligand exchange process in one step, which involved the in-situ formation of hydrophilic dithiocarbamate moieties and subsequent ligand exchange with TOPO at the chloroform/water interface. The resulting water dispersible, dithiocarbamate functionalized CdSe QDs (i.e., D-CdSe) exhibited an increased photoluminescence (PL) quantum yield as compared to the original CdSe-TOPO QDs, suggesting an effective passivation of dithiocarbamate ligands on the QD surface. The D-CdSe QDs were then mixed with hydroxyl terminated TiO{sub 2} nanoparticles. A decrease in the PL of the mixture was observed, indicating a possible charge transfer from the D-CdSe QDs to the TiO{sub 2} nanoparticles. The reaction of the carboxyl group on the D-CdSe surface with the hydroxyl group on the TiO{sub 2} rendered QDs in direct contact with TiO{sub 2}, thereby facilitating the electronic interaction between them.

36 MATERIALS SCIENCE↗

Use of microphysical relationships to discern growth/decay mechanisms of cloud droplets with focus on Z-LWC relationships.

Cloud droplet size distributions hence the key microphysical quantities (e.g., radar reflectivity, droplet concentration, liquid water content, relative dispersion, and mean-volume radius) are determined by different physical mechanisms, including pre-cloud aerosols as CCNs, cloud updraft, and various turbulent entrainment-mixing processes. Therefore, different relationships among these microphysical properties are expected in response to these various mechanisms. The effect of turbulent entrainment-mixing processes is particularly vexing, with different entrainment-mixing processes likely leading to different microphysical relationships. Cloud radar has been widely used to infer the cloud liquid water content (L) from the measurement of radar reflectivity (Z) using a Z-L relationship. Existing Z-L expressions have been often obtained empirically, and differ substantially (Khain et al. 2008). The discrepancy among Z-L relations, which has been hindering the application of cloud radar in measuring cloud properties, likely stems from the different relationships between the relevant microphysical properties caused by different physical processes. This study first analyzes the Z-L relationship theoretically, and identify the key microphysical properties that affect this relationship, and then address the effects of various processes on the Z-L relationship by discerning the characteristics of the relationships between the relative dispersion, droplet concentration, liquid water content, and mean-volume radius calculated from in-situ measurements of cloud droplet size distributions. Effort is also made to further relate the microphysical relationships to physical processes such as turbulent entrainment-mixing.

54 ENVIRONMENTAL SCIENCES↗

Ultrafast x-ray study of dense-liquid-jet flow dynamics using structure tracking velocimetry.

High-speed liquid jets and sprays are complex multiphase flow phenomena with many important industrial applications. Great efforts have been devoted to understand their dynamics since the pioneering work of Rayleigh on low-speed jets. Attempts to use conventional laser optical techniques to provide information about the internal structure of high-speed jets have been unsuccessful owing to the multiple scattering by droplets and interfaces, and the high density of the jet near the nozzle exit. Focused-X-ray-beam absorption measurements could provide only average quantitative density distributions using repeated imaging. Here, we report a novel approach on the basis of ultrafast synchrotron-X-ray full-field phase-contrast imaging. As illustrated in our case study, this technique reveals, for the first time, instantaneous velocity and internal structure of optically dense sprays with a combined unprecedented spatial and time resolution. This technique has tremendous potential for the study of transient phenomenon dynamics.

42 ENGINEERING↗

Nozzle geometry and injection duration effects on diesel sprays measured by x-ray radiography.

X-ray radiography was used to measure the behavior of four fuel sprays from a light-duty common-rail diesel injector. The sprays were at 250 bar injection pressure and 1 bar ambient pressure. Injection durations of 400 {micro}s and 1000 {micro}s were tested, as were axial single-hole nozzles with hydroground and nonhydroground geometries. The X-ray data provide quantitative measurements of the internal mass distribution of the spray, including near the injector orifice. Such measurements are not possible with optical diagnostics. The 400 {micro}s sprays from the hydroground and nonhydroground nozzles appear qualitatively similar. The 1000 {micro}s spray from the nonhydroground nozzle has a relatively consistent moderate width, while that from the hydroground nozzle is quite wide before transitioning into a narrow jet. The positions of the leading- and trailing-edges of the spray have also been determined, as has the amount of fuel residing in a concentrated structure near the leading edge of the spray.

33 ADVANCED PROPULSION SYSTEMS↗

Global molecular structure and interfaces : refining an RNA : RNA complex structure using solution x-ray scattering data.

Determining the global architecture of multicomponent systems is a central problem in understanding biomacromolecular machines. Defining interfaces among components and the global structure of multicomponent systems is a central problem in understanding the biological interactions on a molecular level. We demonstrate that solution X-ray scattering data can be used to precisely determine intermolecular interfaces from just the subunit structures, in the complete absence of intermolecular NMR restraints using an example of a 30 kDa RNA-RNA complex. The backbone root-mean-square deviation (rmsd) between structures that are determined using the scattering data and using intermolecular distance restraints is about 0.4 {angstrom}. Further, we refined the global structure of the complex using scattering data as a global restraint. The rmsd in backbone structures that are determined with and without the scattering data refinement is about 3.2 {angstrom}, suggesting the impact of the refinement to the overall structure. Information about the 'global correctness' of solution RNA structures could not be practically obtained otherwise, due to the molecular nature of the RNA molecules, but could only be defined by the scattering data together by residual dipolar couplings. This method provides a powerful new approach for refining global structures of macromolecular complexes whose subunits are elongated.

59 BASIC BIOLOGICAL SCIENCES↗

Removal of Arsenic from Water Using Granular Ferric Hydroxide: Macroscopic and Microscopic Studies

Removal of arsenate from water using granular ferric hydroxide (GFH) was investigated under different pH and As(V) loading conditions, using batch equilibrium adsorption, FTIR, and EXAFS methods. The arsenate adsorption envelopes on GFH exhibited broad adsorption maxima when the initial As(V) concentration was less than 500 mg/L at sorbent concentration of 10 g/L. As the initial As(V) concentration increased to 500, 1000 or 2000 mg/L for the same sorbent concentration, distinct adsorption maxima appeared and shifted to lower pH. Acidimetric-alkalimetric titration and arsenic adsorption isotherm data indicated that the surface of GFH is high heterogeneous. FTIR spectra revealed that complexes of two different structures, bidentate and monodentate, were formed upon the adsorption of arsenate on GFH, and bidentate complexes were only observed at pH values greater than 6. The EXAFS analyses confirmed that arsenate form bidentate binuclear complexes with GFH at pH 7.4 as evidenced by an average Fe-As(V) bond distance of 3.32 Angstroms.

54 ENVIRONMENTAL SCIENCES↗

Lamellae Orientation in Block Copolymer Films with Ionic Complexes

Lamellae orientation in lithium-complexed polystyrene-block-poly(methyl methacrylate) (PS-b-PMMA) copolymer films on natively oxidized silicon wafers is investigated as a function of film thickness and percentage of carbonyl groups coordinated with lithium ions using cross-sectional transmission electron microscopy and grazing incidence small-angle X-ray scattering. For films with a lower percentage of ionic complexes, the strong surface interaction of the PMMA blocks with the substrate is not changed significantly and the orientation of the lamellar microdomains depends on the film thickness and is dictated by a coupling of the interfacial interactions and the degree of microphase separation. For films with a higher percentage of ionic complexes, the surface interaction is mediated. Along with the enhanced immiscibility between the two blocks, which drives the self-assembly into a stronger microphase segregation, an orientation of the lamellar microdomains normal to the surface is seen, independent of film thickness. Thus, by tuning the amount of ionic complexes, the orientation of lamellar microdomain can be controlled from a random arrangement to being oriented parallel or perpendicular to the film surface without any surface modification or use of external fields, which opens a simple and general route for the fabrication of nanostructured materials.

74 ATOMIC AND MOLECULAR PHYSICS↗

Influence of Interfacial Energy on Electric-Field-Induced Sphere-to-Cylinder Transition in Block Copolymer Thin Films

The effect of the interfacial energy on the electric-field-induced sphere-to-cylinder (S-to-C) transition in polystyrene-b-poly(methyl methacrylate) (PS-b-PMMA) copolymer thin films was studied as a function of the difference in the interfacial interactions of the PS and PMMA blocks with the substrate, d. It was found that the interfacial energies altered both the critical electric field strength and the time scales of kinetics. A very strong preferential interfacial interaction suppressed the electric-field-induced S-to-C transition even though such a transition occurred on a neutralized surface where the interfacial interactions were balanced. For a moderate interfacial interaction, the S-to-C transition can be induced by an applied electric field, but the time scale of the morphology change is much longer. Furthermore, the formation of ionic complexes in the BCP was found to enhance the electric-field-induced S-to-C transition even on a native Si substrate without any surface modification, providing a simple route to generate ordered arrays of high-aspect-ratio cylinders oriented normal to a film surface.

36 MATERIALS SCIENCE↗