SMART-IO: SysteM-AwaRe Two-Level Data Organization for Efficient Scientific Analytics
Abstract not provided
Engineering topics
Publications and source records attributed to Wang, B.
Abstract not provided
Super-irons contain the + 6 valence state of iron. One advantage of this is that it provides a multiple electron opportunity to store additional battery charge. A decrease of particle size from the micrometer to the nanometer domain provides a higher surface area to volume ratio, and opportunity to facilitate charge transfer, and improve the power, voltage and depth of discharge of cathodes made from such salts. However, super-iron salts are fragile, readily reduced to the ferric state, with both heat and contact with water, and little is known of the resultant passivating and non-passivating ferric oxide products. A pathway to decrease the super-iron particle size to the nano-domain is introduced, which overcomes this fragility, and retains the battery capacity advantage of their Fe(VI) valence state. Time and power controlled mechanosynthesis, through less aggressive, dry ball milling, leads to facile charge transfer of super-iron nanoparticles. Ex-situ X-ray Absorption Spectroscopy is used to explore the oxidation state and structure of these iron oxides during discharge and shows the significant change in stability of the ferrate structure to lower oxidation state when the particle size is in the nano-domain.
Hadron physics has been an essential part of the physics program with the CLAS detector in experimental hall B at Thomas Jefferson National Accelerator Facility (Jefferson Lab). With the 12 GeV upgrade of the CEBAF machine, hadron physics in Hall B will be extended to a new domain of higher mass resonances and the range of higher transferred momentum using up to 11 GeV electron beams and the upgraded CLAS12 detector. In this paper, status of the hall B superconducting magnets for the CLAS12 detector is presented.
Ru nanoclusters self-assemble over macroscopic sample areas during vapor deposition of Ru on monolayer graphene (MLG) on Ru(0001). The Ru nanoclusters form arrays with a mean lateral cluster diameter of {approx} 20 {angstrom}, cluster heights of 1 or 2 ML, and a size distribution that remains nearly constant with increasing coverage. Combined scanning tunneling microscopy and density functional theory (DFT) show that the clusters are templated by the MLG/Ru(0001) moire unit cell and identify the preferred binding site of the clusters as the low fcc region of the moire. Cross-sectional transmission electron microscopy (TEM) and high-resolution TEM contrast simulations experimentally demonstrate that the interaction of the Ru clusters with the underlying MLG/Ru(0001) leads to a local lifting of the graphene layer of the template. DFT calculations confirm this mechanism of interaction of the Ru clusters with the strongly coupled MLG/Ru(0001). Weakening of the graphene-support coupling via oxygen intercalation is shown to have a major effect on the assembly of Ru nanocluster arrays. With a preferred binding site lacking on decoupled graphene, the Ru nanoclusters grow significantly larger, and clusters with 1 to 4 ML height can coexist.
Using differential scanning calorimetry (DSC), the heats of formation of Fe{sub 3}Pt, FePt, and FePt{sub 3} were determined from the reaction of sputter deposited Fe/Pt multilayer thin-films with a periodicity of 200 nm but different overall compositions. Film compositions were measured by energy dispersive x-ray spectrometry. The phases present along the reaction path were identified by x-ray diffraction. For the most Fe-rich phase, namely, Fe{sub 3}Pt, the measured enthalpy of formation was -9.3 {+-} 1.3 kJ/mol in a film with a composition of 70.4:29.6 ({+-}0.2 at. %) Fe:Pt. For FePt, the measured enthalpy of formation was -27.2 {+-} 2.2 kJ/g-atom in a 49.0:51.0 ({+-}0.5 at. %) Fe:Pt film. For FePt{sub 3}, which is the most Pt rich intermetallic phase, the measured enthalpy of formation was -23.7 {+-} 2.2 in a film with a composition of 22.2:77.8 ({+-}0.6 at. %) Fe:Pt. The reaction enthalpies for films with Fe:Pt compositions of 44.5:55.5 ({+-}0.3 at. %) and 38.5:61.5 ({+-}0.4 at. %) were -26.9 {+-} 1.0 and -26.6 {+-} 0.6 kJ/g-atom, respectively, which taken together with the value for the 49.0:51.0 film demonstrate the relative insensitivity of the reaction enthalpy to film composition over a broad composition range in the vicinity of the equiatomic composition. The experimental heats of formation are compared with two sets of reported first-principles calculated values for each of the three phases at exact stoichiometry.
The impact of ternary additions of Ni (1.6-21.5 at. %) and Cu (1.3-17.3 at. %) on the A1 (face centered cubic, fcc) to L1{sub 0} phase transformation in FePt films has been re-evaluated based on compositions obtained using energy dispersive x-ray spectrometry (EDS). The data presented here serve as corrections to results reported in six previous studies [D. C. Berry and K. Barmak, J. Appl. Phys. 102, 024912 (2007); 101, 014905 (2007); 99, 08G901 (2006); D. C. Berry, J. Kim, K. Barmak, K. Wierman, E. B. Svedberg, and J. K. Howard, Scr. Mater. 53, 423 (2005); K. Barmak, J. Kim, D. C. Berry, W. N. Hanani, K. Wierman, E. B. Svedberg, and J. K. Howard, J. Appl. Phys. 97, 024902 (2005); K. Barmak, J. Kim, D. C. Berry, K. W. Wierman, E. B. Svedberg, and J. K. Howard, ibid. 95, 7486 (2004)]. The new EDS compositions do not change the following conclusions of these previous studies: (i) when ternary FeNiPt and FeCuPt alloys are compared with binary FePt alloys with the same Pt content, it is seen that additions of Ni slow the transformation kinetics, whereas additions of Cu have no measurable impact on the kinetics, (ii) the Curie temperature of the L1{sub 0} phase is lowered by additions of Ni or Cu, (iii) the Curie temperature of the A1 phase is increased by additions of Ni, but lowered by additions of Cu, and (iv) the transformation enthalpy is lowered by large additions of Ni, but is unaffected by additions of Cu. The ordering behavior of FeCuPt alloys as evidenced by the kinetic ordering temperature is compared with other reports in the literature based on magnetic measurements.
Hall B at Jefferson Laboratory (JLAB) will need a 5 T, 78 cm bore polarized target magnet with a field uniformity of {Delta}B/B{sub 0} <; 10{sup -4} in a useful cylinder of the dimensions 0.04 m long x 0.02 m in diameter. The large magnet is designed with a superconducting coil that provides the solenoid with nearly perfect self shielding in order to reduce the fringe field at nearby photo multiplier tubes (PMTs) to less than 3.5 mT. Because the solenoid is also very close to the Clas12 Torus, the nearly perfect shielding provided by the self shielded solenoid greatly reduces force, field, and torque interactions with the six-coil Torus magnet. The solenoid coil consists of 18 coil modules which are made of coils mounted in aluminum plate discs. Each coil module consists of dual double pancake coils with main coils and shield coil partitioned into separate winding cavities in the aluminum plate discs to distribute and reduce radial hoop load and radial coil forces. Each coil module is effectively an enclosed aluminum box and this serves to partition the axial load and thus reduces coil axial forces. Since overall coil forces within each coil module are reduced, this will greatly reduce the number coil training quenches. This is a very important consideration for this solenoid coil because the coil cooling is adiabatic, using in-direct conduction cooling by 4.5 K supercritical helium, which will provide only a relatively small temperature stability margin. Super critical helium is used as per JLAB specification. Detail design of the coil structure, coil assembly, cold mass, and cryogenic control will be presented. The magnet protection system shall be capable of the following features: (1) quench and fault detection, (2) fast discharge of the magnet, (3) limit fault voltages to safe values, (4) monitor interlock signals to prevent unsafe operation, and (5) provide control logic necessary for safe operation of the solenoid. The instrument systems shall be capable of the following features: (1) monitors and display temperatures within the solenoid magnet, (2) measure loads or stress on the magnet suspension, (3) monitor voltages within the solenoid magnet and charging bus, (4) monitor pressures and (5) use data logging system to save all sensor data. These systems will be described and a quench analysis presented.
Hall B at Jefferson Laboratory (JLAB) will need a 6-coil Torus producing a required integral of B-dl for an upgrade 12 GeV beam. In Sept. 2009, Wang NMR was awarded a contract to design, fabricate, assemble, deliver, and test at JLAB this ex citing magnet. The preliminary design review was completed by Dec. 2009 and intermediate design review will be completed by July 2010. Proto type coil construction, production of soldered conductor with SSC cable and final design review will be completed in 2010. We shall describe preliminary design and intermediate design for coil/cryostat, Torus central cylinder (hub), 48 cold mass suspensions, two intercoil support rings, cryocontrol tower, and adapter to Torus coil, magnet quench protection, and charge/ discharge con trol, and the two parallel path cooling design using supercritical helium. Because of coil in-plane and out-of-plane EM forces over these huge thin coils in addition to vacuum load, gravity load, and cool down thermal stress, we shall present the finite element analyses (FEA) on coil structure, 48 cold mass supports, intercoil cold rings, coil/ cryostat vacuum vessel, cryotower cryostat, and Torus hub. Finally, we shall shows that all pressure/ vacuum vessels and its weldment has satisfied ASME code.
BetaCage, a gaseous neon time-projection chamber, has been proposed as a viable screener for emitters of low-energy alphas and electrons to which commercial radioactivity counting techniques are insensitive. Using radiopure materials for construction, active and passive shielding from extrinsic backgrounds, large counting area and minimal detector mass, BetaCage will be able to achieve sensitivities of 10{sup -5} counts keV{sup -1} kg{sup -1} day{sup -1} in a few days of running time. We report on progress in prototype development work since the last meeting of this workshop.
The impact of ternary additions of Mg, V, Mn, and B on the A1 [face centered cubic (fcc)] to L1{sub 0} phase transformation has been studied. The films were cosputter deposited from elemental targets at room temperature and annealed after deposition. The films had Mg additions in the range {approx}0-2.6 at.%, V additions in the range 0.7-12.2 at.%, Mn additions in the range 2.2-16.3 at.%, and B additions in the range 1.2-12.9 at.%. For all four ternary alloy systems, annealing resulted in the formation of no other phases than the L1{sub 0} phase. Ternary additions of <1.8 at.% Mg, <5.8 at.% V, <6.0 at.% Mn, and <4.8 at.% B had little or no impact on the kinetic ordering temperature (KOT). The behavior of the activation energy for the transformation mirrored that for the KOT, except for Mg additions, which showed no measurable impact for the compositions studied. The transformation enthalpies for the ternary alloys were similar to those for binary FePt films. Only four of the films (with additions of 2.6 at.% Mg, 2.2 at.% and 6.0 at.% Mn, and 4.8 at.% B) for which the Curie transition was observed had lower T{sub C} than the binary FePt films with the same Pt content.
Molecular dynamics (MD) is a powerful tool to probe the thermodynamic and kinetic properties of solid, glass and liquid phases. In classical molecular dynamics (CMD), empirical models are used to describe the force by considering bond, bend and dihedral angle contributions with parameters fitted to experimental data or first-principles calculations of small clusters. In the ab initio molecular dynamics (AIMD), the forces are calculated on the fly using the first-principles density functional theory as discussed above. In the present work, we use AIMD simulations to follow the random walk of atoms in the liquid state. Based on the mean square displacements (MSD), the diffusion coefficients are calculated from the Einstein equation. Furthermore, we extend this approach to understand the diffusion in grain boundaries.
We study the quantum localization phenomena of noninteracting particles in one-dimensional lattices based on tight-binding models with various forms of hopping terms beyond the nearest neighbor, which are generalizations of the famous Aubry-Andre and noninteracting Anderson models. For the case with deterministic disordered potential induced by a secondary incommensurate lattice (i.e., the Aubry-Andre model), we identify a class of self-dual models, for which the boundary between localized and extended eigenstates are determined analytically by employing a generalized Aubry-Andre transformation. We also numerically investigate the localization properties of nondual models with next-nearest-neighbor hopping, Gaussian, and power-law decay hopping terms. We find that even for these nondual models, the numerically obtained mobility edges can be well approximated by the analytically obtained condition for localization transition in the self-dual models, as long as the decay of the hopping rate with respect to distance is sufficiently fast. For the disordered potential with genuinely random character, we examine scenarios with next-nearest-neighbor hopping, exponential, Gaussian, and power-law decay hopping terms numerically. We find that the higher-order hopping terms can remove the symmetry in the localization length about the energy band center compared to the Anderson model. Furthermore, our results demonstrate that for the power-law decay case, there exists a critical exponent below which mobility edges can be found. Our theoretical results could, in principle, be directly tested in shallow atomic optical lattice systems enabling non-nearest-neighbor hopping.
No abstract prepared.
A series of Fe{sub 52}Pt{sub 48},Fe{sub 52.3}Pt{sub 46.3}Ta{sub 1.4} and Fe{sub 52}Pt{sub 40.7}Ta{sub 7.3} thin films were sputter deposited and subsequently annealed at 550 and 750 deg. C for 30 min. The as-deposited films, which adopted the A1 phase, had a change from a predominate (111) fiber texture to (200) with the Ta additions. This has been explained in terms of the competition between the surface energy and strain energy. Annealing at 550 deg. C facilitated the L1{sub 0} order in Fe{sub 52}Pt{sub 48} and Fe{sub 52.3}Pt{sub 46.3}Ta{sub 1.4}. Upon annealing at 750 deg. C, all three composition films phase transformed into L1{sub 0}. Atom probe tomography revealed nanoscale clustering in the annealed Ta containing films. The formation of these clusters appeared to be a necessary initial step to allow the L1{sub 0} ordering reaction to occur but clustering in of itself is not sufficient for order. For the Fe{sub 52}Pt{sub 40.7}Ta{sub 7.3} film, the Ta must be depleted within the matrix to a sufficient level to allow the binary Fe-Pt to order. For the Fe{sub 52.3}Pt{sub 46.3}Ta{sub 1.4} film, these clusters were qualitatively observed within the grains at 550 deg. C and in the grain boundaries at 750 deg. C. The Fe{sub 52}Pt{sub 40.7}Ta{sub 7.3} film had clusters within and near grain boundaries. The clustering in the grain boundaries deterred grain growth through a Zener-based pinning mechanism.
This study reports on heterogeneous ice nucleation activity of predominantly organic (or coated with organic material) anthropogenic particles sampled within and around the polluted environment of Mexico City. The onset of heterogeneous ice nucleation was observed as a function of particle temperature (Tp), relative humidity (RH), nucleation mode, and particle chemical composition which is influenced by photochemical atmospheric aging. Particle analyses included computer controlled scanning electron microscopy with energy dispersive analysis of X-rays (CCSEM/EDX) and scanning transmission X-ray microscopy with near edge X-ray absorption fine structure spectroscopy (STXM/NEXAFS). In contrast to most laboratory studies employing proxies of organic aerosol, we show that anthropogenic organic particles collected in Mexico City can potentially induce ice nucleation at experimental conditions relevant to cirrus formation. The results suggest a new precedent for the potential impact of organic particles on ice cloud formation and climate.
Abstract not provided
With a recently developed time-evolving block decimation algorithm, we numerically study the ground-state quantum phase diagram of Fermi mixtures with attractive interspecies interactions loaded in one-dimensional optical lattices. For our study, we adopt a general asymmetric Hubbard model with species-dependent tunneling rates to incorporate the possibility of mass imbalance in the mixtures. We find clear signatures for the existence of a Fulde-Ferrell-Larkin-Ovchinnikov (FFLO) phase in this model in the presence of population imbalance. Our simulation also reveals that in the presence of mass imbalance, the parameter space for FFLO states shrinks or even completely vanishes depending on the strength of the attractive interaction and the degree of mass imbalance.