Engineering PapersSearch

Engineering topics

Trajmar, S.

Publications and source records attributed to Trajmar, S..

At least 55 records · Page 3

Experimental techniques for cross-section measurements

Attention is given to electron collision phenomena which can be studied under single-collision conditions at low and intermediate electron impact energies, ranging from threshold to a few hundred eV, using gas phase molecular targets. Several of the experimental methods discussed were first developed and applied to atoms, but are equally applicable to molecules with minor modifications in the interpretation of the data, due to the greater complexity of molecular systems.

Trajmar, S.

Electron scattering by molecules. II - Experimental methods and data

Experimental techniques for measuring electron-molecule collision cross sections are briefly summarized. A survey of the available experimental cross section data is presented. The emphasis here is on elastic scattering, rotational, vibrational and electronic excitations, total electron scattering, and momentum transfer in the few eV to few hundred eV impact energy range. Reference is made to works concerned with high energy electron scattering, innershell and multi-electron excitations, conicidence methods and electron scattering in laser fields.

Trajmar, S.

Investigation of superelastic electron scattering by laser-excited Ba - Experimental procedures and results

Differential (in angle) electron scattering experiments on laser-excited Ba-138 1P were carried out at 30- and 100-eV impact energies. The laser light was linearly polarized and located in the scattering plane. The superelastic scattering signal was measured as a function of polarization direction of the laser light with respect to the scattering plane. It was found at low electron scattering angles that the superelastic scattering signal was asymmetric to reflection of the polarization vector with respect to the scattering plane. This is in contradiction with theoretical predictions. An attempt was made to pinpoint the reason for this observation, and a detailed investigation of the influence of experimental conditions on the superelastic scattering was undertaken. No explanation for the asymmetry has as yet been found.

Register, D. F.

Electron impact excitation of methane

A crossed molecular beam-electron beam apparatus was employed to examine the excitation cross-sections of CH4. Attention was given to 20, 30, and 200 eV impact energies at angles from 8-130 deg. Spectra were obtained in the elastic and inelastic realms as well as in the ionization continuum in the 12.99-15.0 eV energy-loss range. Differential cross-sections were also determined. The results are useful for modeling the behavior of CH4 in planetary atmospheres.

Vuskovic, L.

Electron impact excitation of SO2 - Differential, integral, and momentum transfer cross sections

Electron impact excitation of the electronic states of SO2 was investigated. Differential, integral, and inelastic momentum transfer cross sections were obtained by normalizing the relative measurements to the elastic cross sections. The cross sections are given for seven spectral ranges of the energy-loss spectra extending from the lowest electronic state to near the first ionization limit. Most of the regions represent the overlap of several electronic transitions. No measurements for these cross sections have been reported previously.

Vuskovic, L.

Electron impact cross sections for the 2,2P state excitation of lithium

Electron impact excitation of the 2p 2P state of Li was studied at 10, 20, 60, 100, 150 and 200 eV. Relative differential cross sections in the angular range 3-120 deg were measured and then normalized to the absolute scale by using the optical f value. Integral and momentum transfer cross sections were obtained by extrapolating the differential cross sections to 0 deg and to 180 deg. The question of normalizing electron-metal-atom collision cross sections in general was examined and the method of normalization to optical f values in particular was investigated in detail. It has been concluded that the extrapolation of the apparent generalized oscillator strength (obtained from the measured differential cross sections) to the zero momentum transfer limit with an expression using even powers of the momentum transfer and normalization of the limit to the optical f value yields reliable absolute cross sections.

Vuskovic, L.

Excitation cross sections for krypton by electrons in the 15-100-eV impact-energy range

Differential, integral, and momentum-transfer cross sections have been determined for the excitation of the 24 lowest electronic states of Kr (some of the transitions are unresolved). The inelastic-scattering cross sections were normalized to the absolute scale with the help of the elastic-scattering differential cross sections (DCS's) which in turn were normalized with respect to absolute He DCS's. The impact energies were 15, 20, 30, 50, and 100 eV and the DCS's were obtained over the range of 5-135 deg scattering angles. The error limits associated with the differential, integral, and momentum-transfer cross sections have been estimated at 25%, 38%, and 46%, respectively.

Trajmar, S.

Effective path length corrections in beam-beam scattering experiments

The effect of the change of scattering geometry with scattering angle in beam-beam experiments is investigated. Atomic (molecular) target distributions associated with static gas, orifice, tube, capillary array (with and without further collimation), and jet sources have been considered in model calculations for a number of commonly used electron scattering geometries. The relationship between scattering intensity, cross section, and the geometrical integral called 'effective path length' is derived. Volume correction factors (the reciprocal of effective path length) have been calculated for sample cases to illustrate the effect of various beam and scattering geometry characteristics. The validity of the model calculation has been experimentally verified. Most of the commonly used scattering geometries require significant correction of the scattering intensity distributions, but with proper planning scattering geometries can be designed such that the intensity and the cross section angular distribution are identical within 1%.

Brinkmann, R. T.

Elastic scattering and vibrational excitation of CO2 by 4, 10, 20 and 50 eV electrons

Elastic and vibrationally inelastic differential, integral and momentum-transfer cross sections for electrons scattered by CO2 molecules are reported at 4, 10, 20 and 50 eV impact energies. The elastic cross sections are placed on an absolute scale by means of a relative flow technique. The inelastic cross sections are normalised to the elastic ones by using the inelastic to elastic intensity ratios. Data are reported for up to ten features in the 0.0 to 0.4 eV energy-loss region.

Register, D. F.

Electron-atom /molecule/ collision processes

Electron-atom (molecule) collision processes at low and intermediate energies, from near threshold to a few hundred electron volts, are discussed. Attention is given to experimental techniques and procedures, electron impact cross sections, impact excitation and electron-atom scattering in laser fields. Specific examples are presented that illustrate various experimental techniques and interpretations of observations.

Trajmar, S.

Absolute elastic differential electron scattering cross sections for He - A proposed calibration standard from 5 to 200 eV

Absolute differential, integral, and momentum-transfer cross sections for electrons elastically scattered from helium are reported for the impact energy range of 5 to 200 eV. Angular distributions for elastically scattered electrons are measured in a crossed-beam geometry using a collimated, differentially pumped atomic-beam source which requires no effective-path-length correction. Below the first inelastic threshold the angular distributions were placed on an absolute scale by use of a phase-shift analysis. Above this threshold, the angular distributions from 10 to 140 deg were fitted using the phase-shift technique, and the resulting integral cross sections were normalized to a semiempirically derived integral elastic cross section. Depending on the impact energy, the data are estimated to be accurate to within 5 to 9%.

Register, D. F.

Electron impact spectroscopy

The concepts of electron impact spectroscopy are discussed, comparing the electron spectroscopy techniques with those of the optical spectroscopy. The main advantage of the electron spectroscopy is to be found in the elimination of optical selection rules in excitation processes and the ability to scan the spectrum from the infrared to the X-ray region. The range of the method is indicated through a review of several examples, including electron impact excitation of Ba and rotational excitation of H2. The sensitivity of the method is demonstrated by vibrational excitation spectrum of N2. It is shown that the application of the method to the inner-shell excitation allows to obtain information about molecular species which are not commonly available, while spectroscopy of negative ions yields information about their energy and symmetry properties. However, the techniques are still under development and more data are expected to become available in the coming years.

Trajmar, S.

Electron energy-loss spectra in molecular fluorine

Electron energy-loss spectra in molecular fluorine, for energy losses from 0 to 17.0 eV, have been taken at incident electron energies of 30, 50, and 90 eV and scattering angles from 5 to 140 deg. Features in the spectra above 11.5 eV energy loss agree well with the assignments recently made from optical spectroscopy. Excitations of many of the eleven repulsive valence excited electronic states are observed and their location correlates reasonably well with recent theoretical results. Several of these excitations have been observed for the first time and four features, for which there are no identifications, appear in the spectra.

Nishimura, H.

Electron impact study of potassium hydroxide

An attempt is made to measure the sum of the elastic, rotational and vibrational scattering of electrons by KOH at low impact energies (5 to 20 eV) at angles from 10 to 120 deg. Energy loss spectra taken in the 0 to 18 eV range using an electron impact spectrometer are used to identify the species contributing to electric scattering. At temperatures between 300 and 500 C, only inelastic spectral features belonging to water are detected, while at temperatures from 500 to 800 C strong atomic K lines, indicative of molecular dissociation, and H2 energy loss features become prominent. No features attributable to KOH, the KOH dimer, O2 or potassium oxides were observed, due to the effects of the dissociation products, and it is concluded that another technique will have to be developed in order to measure electron scattering by KOH.

Vuskovic, L.

Electron impact cross section measurements related to 'nuclear pumping'

In direct nuclear pumped lasers the high energy fission fragments generate a large number of secondary electrons and these electrons are mainly responsible for achieving the population inversion in the lasing media. Laboratory measurements concerned with these electron impact processes are summarized and new results are presented on rare gases, N2, CO, CF3I and UF6.

Trajmar, S.

Electron impact excitation of autoionising states of krypton

Energy-loss spectra of krypton in the region between 21 and 29 eV have been obtained at electron impact energies of 30, 60 and 100 eV. For each energy, the angular distribution of intensities has been measured at 5, 10 and 15 deg scattering angles. Assignments of spectral features found in this region are suggested and a comparison is made with previous measurements.

Srivastava, S. K.